Gitiles
Code Review Sign In
gerrit.devboardsforandroid.linaro.org / platform / external / u-boot / 7da7ff54914ca58a289bd8e0fda6e7240c545826
  1. 7da7ff5 power: pmic: Let PFUZE3000 see all 256 registers by Trent Piepho · 6 years ago
  2. fd8c1fc arm: dts: imx7: colibri: add raw NAND support by Stefan Agner · 6 years ago
  3. aba6a0f arm: dts: imx7: sync with Linux by Stefan Agner · 6 years ago
  4. 6275445 mtd: nand: mxs_nand: add support for specific ECC strength by Stefan Agner · 6 years ago
  5. f75e83b mtd: nand: mxs_nand: add device tree support by Stefan Agner · 6 years ago
  6. 6874834 mtd: nand: mxs_nand: move structs into header file by Stefan Agner · 6 years ago
  7. 502bdc6 mtd: nand: mxs_nand: add use_minimum_ecc to struct by Stefan Agner · 6 years ago
  8. 3b1328a mtd: nand: mxs_nand: separate board/controller init by Stefan Agner · 6 years ago
  9. 0d4e9d8 mtd: nand: mxs_nand: use more precise function name by Stefan Agner · 6 years ago
  10. 931747e mtd: nand: mxs_nand: move register structs to driver data by Stefan Agner · 6 years ago
  11. 984df7a mtd: nand: mxs_nand: add minimal ECC support by Stefan Agner · 6 years ago
  12. 5c69dd0 mtd: nand: mxs_nand: report correct ECC parameters by Stefan Agner · 6 years ago
  13. 28897e8 mtd: nand: mxs_nand: use structure for BCH geometry by Stefan Agner · 6 years ago
  14. dc0b69f mtd: nand: mxs_nand: allow to enable BBT support by Stefan Agner · 6 years ago
  15. 5346c31 mtd: nand: mxs_nand: use self init by Stefan Agner · 6 years ago
  16. 9345943 mtd: nand: mxs_nand: introduce SPL specific init by Stefan Agner · 6 years ago
  17. 51f957a mx6cuboxi: fix 4GB ddr memory detection by Jon Nettleton · 6 years ago
  18. 7370820 mx6cuboxi: consolidate board detection and add som revision checking by Jon Nettleton · 6 years ago
  19. 8fd05fc drivers/gpio/mxc: fix MXC GPIO name in KConfig by Hannes Schmelzer · 6 years ago
  20. 82e8ba0 board: engicam: spl: match icore-mipi fit-config by Jagan Teki · 6 years ago
  21. 76881bb config: Update defconfig for imx53 K+P boards by Lukasz Majewski · 6 years ago
  22. 61c1650 board: Remove not needed function for the K+P's imx53 board by Lukasz Majewski · 6 years ago
  23. e8d2f28 board: Silent out the console on the K+P's imx53 boards by Lukasz Majewski · 6 years ago
  24. 0b35b2d board: Add support for KEY1 status detection on K+P's HSC|DDC boards by Lukasz Majewski · 6 years ago
  25. 5ca614c board: Adjust K+P script to run misc (per board) adjustments by Lukasz Majewski · 6 years ago
  26. 642c1f5 board: imx53: Always disable display before starting kernel by Lukasz Majewski · 6 years ago
  27. faab193 pico-imx7d: Adjust the dtb name by Fabio Estevam · 6 years ago
  28. 1da1938 spl: Add default values for ARCH_MX7 by Fabio Estevam · 6 years ago
  29. 97294a4 wandboard: Remove hardcoded baudrate from "console" variable by Otavio Salvador · 6 years ago
  30. 29b921b ARM: mxs: let boards override entire dram parameter table by Mans Rullgard · 6 years ago
  31. c5437e5 imx: Enable ACTLR.SMP bit for all i.MX cortex-a7 platforms by Ye Li · 6 years ago
  32. 2c09dbf display5: Add missing environment.h include to avoid warning by Lukasz Majewski · 6 years ago
  33. 0f05512 display5: config: Add GPT verification and restoration code on SWUpdate entry by Lukasz Majewski · 6 years ago
  34. bfb504b display5: display5_defconfig: Enable support for gpt command (CMD_GPT) in production u-boot by Lukasz Majewski · 6 years ago
  35. 9fea1ca display5: config: Reduce rootfs2 (BACKUP) size from 1528M to 512M by Lukasz Majewski · 6 years ago
  36. 5d92540 display5: config: Add cma=256M to command line arguments by Lukasz Majewski · 6 years ago
  37. c451713 display5: net: Add function to read ethaddr from iMX6 fuses by Lukasz Majewski · 6 years ago
  38. ea4584d display5: ddr: Enable support for DDR3 auto calibration by Lukasz Majewski · 6 years ago
  39. b5f4543 display5: config: Update swupdate initramfs file name (now supporting ext4) by Lukasz Majewski · 6 years ago
  40. 18ccca5 display5: config: factory: Update BACKUP rootfs in factory mode by Lukasz Majewski · 6 years ago
  41. dd4ed88 display5: config: Provide 'tftp_mmc_rootfs_bkp' command to write BACKUP rootfs by Lukasz Majewski · 6 years ago
  42. 76d1d16 display5: wdt: Enable WDT support (both SPL and u-boot) by Lukasz Majewski · 6 years ago
  43. 27aede2 display5: Support for the emergency PAD pressing by Lukasz Majewski · 6 years ago
  44. cf74e0a display5: config: factory: Extend mtdparts to support LEG factory partition by Lukasz Majewski · 6 years ago
  45. 1fa328f display5: config: Update SPI-NOR partition for larger swupdate-initramfs by Lukasz Majewski · 6 years ago
  46. b78e9c4 display5: config: Remove support for Linux initramfs recovery image boot by Lukasz Majewski · 6 years ago
  47. 1bcbf48 display5: config: Reset the board when bootm fails by Lukasz Majewski · 6 years ago
  48. e087905 display5: spl: Check return code of the env_* functions by Lukasz Majewski · 6 years ago
  49. 2f4372a display5: config: Provide command to flash the whole SPI-NOR memory by Lukasz Majewski · 6 years ago
  50. 86d759e display5: config: Add "factory" (1MiB) SPI-NOR partition in u-boot by Lukasz Majewski · 6 years ago
  51. 4864ba7 display5: config: factory: Setup IP config data according to LEG production setup by Lukasz Majewski · 6 years ago
  52. 13e012f display5: factory: Add support for BOOT_FROM = FACTORY switch by Lukasz Majewski · 6 years ago
  53. a715415 Merge branch 'master' of git://git.denx.de/u-boot-usb by Tom Rini · 6 years ago
  54. f58e779 Merge tag 'arc-updates-for-2018.07-rc2' of git://git.denx.de/u-boot-arc by Tom Rini · 6 years ago
  55. d94e89c Merge tag 'xilinx-for-v2018.07-rc2' of git://git.denx.de/u-boot-microblaze by Tom Rini · 6 years ago
  56. 3b4410d ARC: HSDK: Add readme by Alexey Brodkin · 6 years ago
  57. 9ddcfef ARC: HSDK: Add tool and make target to generate bsp by Eugeniy Paltsev · 6 years ago
  58. b729ed0 serial: zynq: Make zynq_serial_setbrg static by Michal Simek · 6 years ago
  59. a673025 serial: zynq: Initialize uart only before relocation by Michal Simek · 6 years ago
  60. e90d265 serial: zynq: Write chars till output fifo is full by Michal Simek · 6 years ago
  61. c9a2c47 serial: zynq: Use BIT macros instead of shifts and full hex numbers by Michal Simek · 6 years ago
  62. 01fcf01 gpio: zynq_gpio: bank description should use unsigned type by Michal Simek · 6 years ago
  63. e3c26b8 arm64: zynqmp: Check return value in zynqmp_mmio_rawwrite() by Michal Simek · 6 years ago
  64. 1e3e68f arm64: zynqmp: Check return value from calloc by Michal Simek · 6 years ago
  65. b691178 mmc: zynq: Fix tuning_loop_counter type in arasan_sdhci_execute_tuning() by Michal Simek · 6 years ago
  66. 1471fad gpio: zynq: Do not check unsigned type that is >= 0 by Michal Simek · 6 years ago
  67. 1a7414f mmc: sdhci: Fix MMC HS200 tuning command failures by Siva Durga Prasad Paladugu · 6 years ago
  68. c7df098 arm64: zynqmp: accept an absolute path for PMUFW_INIT_FILE by Luca Ceresoli · 6 years ago
  69. 343671e arm64: zynqmp: Enable SPD ddr support for zcu102 targets by Michal Simek · 6 years ago
  70. 56c0e64 timer: cadence: Implement timer_get_boot_us by Michal Simek · 6 years ago
  71. 3c1eaec arm: zynq: Drop #address-cells and #size-cells from gpio-keys by Michal Simek · 6 years ago
  72. bc0f4ed arm64: zynqmp: Split emmc configuration into emmc0 and emmc1 by Siva Durga Prasad Paladugu · 6 years ago
  73. 0ecd14e arm: zynq: Add missing watchdog header by Michal Simek · 6 years ago
  74. 9d0dc69 Merge tag 'signed-efi-next' of git://github.com/agraf/u-boot by Tom Rini · 6 years ago
  75. 606fddd Merge branch 'master' of git://git.denx.de/u-boot-net by Tom Rini · 6 years ago
  76. b9f3475 usb: sunxi: access ahb_reset0_cfg in CCM using its offset by Vasily Khoruzhick · 6 years ago
  77. 58bc69d efi_loader: Allocate memory handle for mem dp by Alexander Graf · 6 years ago
  78. 2f61b13 efi_loader: avoid make race condition by Heinrich Schuchardt · 6 years ago
  79. 44ab2d3 efi_loader: avoid initializer element is not constant by Heinrich Schuchardt · 6 years ago
  80. 2d2b5b2 efi: Add a comment about duplicated ELF constants by Simon Glass · 6 years ago
  81. e467948 efi_loader: Convert runtime reset from switch to if statements by Alexander Graf · 6 years ago
  82. de452c0 riscv: Add support for HI20 PE relocations by Alexander Graf · 6 years ago
  83. 5b2c9a6 net: gem: Check return value from memalign/malloc by Michal Simek · 6 years ago
  84. 7674b64 net: zynq_gem: Initialize phyreg variable by Michal Simek · 6 years ago
  85. b33d4a5 net: zynq_gem: Fix return type for phy...() by Michal Simek · 6 years ago
  86. 5194ed7 net: mvgbe: extract common code for SMI wait by Chris Packham · 6 years ago
  87. c612219 net: designware: set the PS bit when resetting DMA bus in MII configuration by Quentin Schulz · 6 years ago
  88. 3cb51da net: phy: mv88e61xx: Force CPU port link up by Chris Packham · 6 years ago
  89. 199b27b mvebu: neta: align DMA buffers by Jon Nettleton · 6 years ago
  90. a892779 net: add Socionext AVE ethernet driver support by Kunihiko Hayashi · 6 years ago
  91. ff114e0 net: include/phy.h: add new mode for internal phy by Kunihiko Hayashi · 6 years ago
  92. 98017a1 drivers/net/vsc9953: Initialize action RAM in VCAP complex by Radu Bulie · 6 years ago
  93. d48d40a net: nfs: don't fail when nfs_read_reply returns -NFS_RPC_DROP by Vasily Khoruzhick · 6 years ago
  94. 286bea2 net: cpsw: ti: Reap completed packets before stopping interface by Alex Kiernan · 6 years ago
  95. 60177b2 net: Protect net_state from reentrant net_loop() by Leonid Iziumtsev · 6 years ago
  96. 552e7c5 net/phy/cortina: Add support for CS4223 PHY by Vicentiu Galanopulo · 6 years ago
  97. 6e35686 net: sunxi: Correct MAC address register order by Joe Hershberger · 6 years ago
  98. 6f0dc0c net: Express LINK_LOCAL dependency on LIB_RAND by Joe Hershberger · 6 years ago
  99. 5e9d9ab tsec: Fix reading phy registers from DT by Mario Six · 6 years ago
  100. 3ce4304 net: Initialize as many ethernet devices as possible by Mario Six · 6 years ago