Gitiles
Code Review Sign In
gerrit.devboardsforandroid.linaro.org / platform / external / u-boot / 81a87e189456be131e4c95a8a0b6b4c4c52e0175
  1. 81a87e1 gpio: Add support for Qualcomm gpio controller by Mateusz Kulikowski · 9 years ago
  2. 142a20c serial: Add support for Qualcomm serial port by Mateusz Kulikowski · 9 years ago
  3. 39fbac9 board: ti: DRA7: Add DP83867 TI phy for rev c by Dan Murphy · 9 years ago
  4. 38ce65e efi_loader: Always allocate the highest available address by Alexander Graf · 9 years ago
  5. 41582e2 sniper: Change vendor name from lge to lg, matching devicetree vendor prefix by Paul Kocialkowski · 9 years ago
  6. 523849a kc1: Proper reboot mode and boot reason validation by Paul Kocialkowski · 9 years ago
  7. c15ab5b sniper: Proper reboot mode and boot reason validation by Paul Kocialkowski · 9 years ago
  8. 44b0cf4 kc1: Add some sysboot and devicetree-related environment variables by Paul Kocialkowski · 9 years ago
  9. 163d876 kc1: Select libfdt to allow running devicetree-based kernels by Paul Kocialkowski · 9 years ago
  10. f5fdc37 kc1: Include explicit serial baudrate on bootargs by Paul Kocialkowski · 9 years ago
  11. 5fcbca5 sniper: Include explicit serial baudrate on bootargs by Paul Kocialkowski · 9 years ago
  12. 62022d5 arm64: booti: add missing unmap_sysmem() by Masahiro Yamada · 9 years ago
  13. 27ce696 configs: ti_armv7_keystone2: make SYS_TEXT_BASE configurable at build time by Vitaly Andrianov · 9 years ago
  14. f00169a arm: spl: Align default board_init_f comment with code by Andreas Dannenberg · 9 years ago
  15. 9d906bf post: Remove references to scrapped "netta" board. by Robert P. J. Day · 9 years ago
  16. 9a5d993 common: env_sf: Add exclamation mark by Peng Fan · 9 years ago
  17. 1c8fdf8 jffs2: Fix set but not used warning by Tom Rini · 9 years ago
  18. 65b3c6b lib/physmem.c: Switch to __weak for arch_phys_memset by Tom Rini · 9 years ago
  19. 5735bca post: Delete unnecessary bitmask of POST_MANUAL from POST_ALWAYS by Robert P. J. Day · 9 years ago
  20. 92a4c3d post: Remove reference to deleted "lwmon" board from Makefile by Robert P. J. Day · 9 years ago
  21. 8122d21 Common: SPL: spl_nand: Fixed debug correct NAND ECC type. by Ahmed Samir Khalil · 9 years ago
  22. f031f50 rpi: BCM2837 and Raspberry Pi 3 32-bit support by Stephen Warren · 9 years ago
  23. 95a2dda ARM: bcm2835: expand Kconfig target descriptions by Stephen Warren · 9 years ago
  24. 7233fb3 rpi: add Raspberry Pi 3 board ID by Stephen Warren · 9 years ago
  25. 29937ca rpi: use constant "unknown board" DT filename by Stephen Warren · 9 years ago
  26. adb91ec ARM: bcm2835: move CONFIG_BCM283* to Kconfig by Stephen Warren · 9 years ago
  27. 4c1d5c2 doc: clarify openssl-based key and certificate generation process by Andreas Dannenberg · 9 years ago
  28. 486c39c doc: fix file extension for flattened image tree blob by Andreas Dannenberg · 9 years ago
  29. ab5645f README: Specify the full path for README.displaying-bmps by Fabio Estevam · 9 years ago
  30. 2283284 ARM: keystone2: Add missing privilege ID settings by Nishanth Menon · 9 years ago
  31. 1f807a9 ARM: keystone2: Refactor MSMC macros to avoid #ifdeffery by Nishanth Menon · 9 years ago
  32. e320f0b smsc95xx: fix operation on 64-bit systems by Stephen Warren · 9 years ago
  33. f8bb696 Drop command-processing code when CONFIG_CMDLINE is disabled by Simon Glass · 9 years ago
  34. 7432220 fastboot: allow retrieving fastboot variables from env by Rob Herring · 9 years ago
  35. b745e82 arm: clang: Update support slightly by Tom Rini · 9 years ago
  36. 40345e9 Merge branch 'master' of http://git.denx.de/u-boot-sunxi by Tom Rini · 9 years ago
  37. 3ffe39e sunxi: Reserve ATF memory space on A64 by Alexander Graf · 9 years ago
  38. 7adbd116 sunxi: Add Pine64+ support by Siarhei Siamashka · 9 years ago
  39. d96ebc4 sunxi: Add support for Allwinner A64 SoCs by Siarhei Siamashka · 9 years ago
  40. 0ea5a04 sunxi: Explicitly cast u32 pointer conversions by Alexander Graf · 9 years ago
  41. 8434f03 sunxi: Depend SPL configs on SUPPORT_SPL by Alexander Graf · 9 years ago
  42. e6e505b sunxi: Move cpu independent code to mach directory by Alexander Graf · 9 years ago
  43. fa06f7e sunxi: Enable USB nodes for H8Homlet v2 by Chen-Yu Tsai · 9 years ago
  44. d02e647 sunxi: Enable USB on Cubietruck Plus by Chen-Yu Tsai · 9 years ago
  45. b0bea66 sunxi: Add USB and R_PIO nodes to sun8i-a83t.dtsi by Chen-Yu Tsai · 9 years ago
  46. 7e4c5d2 sunxi: Cubietruck Plus: Enable USB Kconfig options in defconfig by Chen-Yu Tsai · 9 years ago
  47. 3cc7177 sunxi: h8_homlet_v2: Enable USB Kconfig options in defconfig by Chen-Yu Tsai · 9 years ago
  48. 7f5b1e9 ARM: uniphier: remove CONFIG_ARP_TIMEOUT define by Masahiro Yamada · 9 years ago
  49. 6797630 cosmetic: Fix typos "privide" by Masahiro Yamada · 9 years ago
  50. 5b66006 ARM: uniphier: rename function names ph1_* to uniphier_* by Masahiro Yamada · 9 years ago
  51. a75ecfc ARM: uniphier: add pin-mux settings for NAND, eMMC, SD of PH1-sLD3 by Masahiro Yamada · 9 years ago
  52. 67bd9bb ARM: uniphier: enable eMMC on PH1-sLD3 reference board by Masahiro Yamada · 9 years ago
  53. ac2a103 ARM: uniphier: adjust dram_init() and dram_init_banksize() for ARM64 by Masahiro Yamada · 9 years ago
  54. 15826e7 ARM: uniphier: drop unneeded defines related to legacy serial driver by Masahiro Yamada · 9 years ago
  55. 89d8769 ARM: dts: uniphier: add NAND pinmux node by Masahiro Yamada · 9 years ago
  56. f149498 ARM: dts: uniphier: add clock-frequency to serial nodes of LD11/LD20 by Masahiro Yamada · 9 years ago
  57. 6105aa2 pinctrl: uniphier: support UniPhier PH1-LD11 pinctrl driver by Masahiro Yamada · 9 years ago
  58. 8a3328c pinctrl: uniphier: support UniPhier PH1-LD20 pinctrl driver by Masahiro Yamada · 9 years ago
  59. 3b05b5f pinctrl: uniphier: support per-pin input enable for new SoCs by Masahiro Yamada · 9 years ago
  60. 8cc92b9 pinctrl: uniphier: introduce capability flag by Masahiro Yamada · 9 years ago
  61. 510454d pinctrl: uniphier: use devm_get_addr() to get base address by Masahiro Yamada · 9 years ago
  62. 4f80501 mmc: uniphier: use devm_get_addr() to get base address by Masahiro Yamada · 9 years ago
  63. bc82a13 gpio: uniphier: use devm_get_addr() to get base address by Masahiro Yamada · 9 years ago
  64. 336399f i2c: uniphier: use devm_get_addr() to get base address by Masahiro Yamada · 9 years ago
  65. 45a3b1f clk: uniphier: use devm_get_addr() to get base address by Masahiro Yamada · 9 years ago
  66. b37a1cc serial: uniphier: use devm_get_addr() to get base address by Masahiro Yamada · 9 years ago
  67. 61a4f5b ARM: uniphier: add sramupdate command by Masahiro Yamada · 9 years ago
  68. 86c3345 ARM: uniphier: make u-boot-with-spl.bin really available by Masahiro Yamada · 9 years ago
  69. 15305c2 mtd: nand: denali: max_banks calculation changed in revision 5.1 by Graham Moore · 9 years ago
  70. 045ae7e sunxi: ohci: Add A83T compatible by Chen-Yu Tsai · 9 years ago
  71. 3655f28 sunxi: ehci: Add A83T compatible by Chen-Yu Tsai · 9 years ago
  72. 93bac95 sunxi: clk: Fix USB PHY clock macros for A83T by Chen-Yu Tsai · 9 years ago
  73. 0c935ac sunxi: usb_phy: Add support for A83T USB PHYs by Chen-Yu Tsai · 9 years ago
  74. 5bbda17 sunxi: h8_homlet_v2: Set DLDO4 to 3.3V by Chen-Yu Tsai · 9 years ago
  75. 9c85a40 sunxi: h8_homlet_v2: Set DCDC1 to default voltage (3.3V) by Chen-Yu Tsai · 9 years ago
  76. 38491d9 power: axp818: Add support for FLDOs by Chen-Yu Tsai · 9 years ago
  77. 4c6a9ca power: axp818: Fix DCDC5 default voltage by Chen-Yu Tsai · 9 years ago
  78. b25b7ad sunxi: axp: Support VBUS drive GPIO on AXP818 by Chen-Yu Tsai · 9 years ago
  79. 81a8aa3 sunxi: axp: Generalize register macros for VBUS drive GPIO by Chen-Yu Tsai · 9 years ago
  80. 96fccb1 musb: sunxi: Add support for A83T by Chen-Yu Tsai · 9 years ago
  81. b270eaa power: axp818: Remove undefined axp818_init() by Chen-Yu Tsai · 9 years ago
  82. affa020 sunxi: Enable LDO3 and LDO4 at 2.8V on OLinuxIno Lime boards by Hans de Goede · 9 years ago
  83. 53866b6 sunxi: A20-OLinuXino-Lime2: Force 8211CL to master by Michael Haas · 9 years ago
  84. 7e4e7e4 sunxi: A20-Olimex-SOM-EVB: Force 8211CL to master by Michael Haas · 9 years ago
  85. 525d187 net: phy: Optionally force master mode for RTL PHY by Michael Haas · 9 years ago
  86. c74384c sunxi: Print soc-id from sram controller for sun8i boards by Hans de Goede · 9 years ago
  87. 5f8afd7 sunxi: Add conditional magic sram poke for A33 by Hans de Goede · 9 years ago
  88. 080c499 Merge branch 'master' of git://git.denx.de/u-boot-tegra by Tom Rini · 9 years ago
  89. 0badc64 Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriq by Tom Rini · 9 years ago
  90. 8f83759 ARM: tegra210: set PLLE_PTS bit when enabling PLLE by Stephen Warren · 9 years ago
  91. ed2530d armv8/ls2080ardb: Enable VID support by Rai Harninder · 9 years ago
  92. 2ef846e armv8/ls1043aqds: dts: Set SPI mode for DSPI by Qianyu Gong · 9 years ago
  93. d91721d armv8: fsl-layerscape: Add LS1023A SVR by Mingkai Hu · 9 years ago
  94. 16cee52 armv8: fsl-layerscape: Fix LS1043A SVR register by Mingkai Hu · 9 years ago
  95. 85bb389 SECURE BOOT: Change fsl_secboot_validate func to pass image addr by Saksham Jain · 9 years ago
  96. c4666cf SECURE BOOT: Halt execution when secure boot fail by Saksham Jain · 9 years ago
  97. 2bfe489 SECURE_BOOT: Use default bootargs by Saksham Jain · 9 years ago
  98. 8a6f83d crypto/fsl: Make CAAM transactions cacheable by Saksham Jain · 9 years ago
  99. 69b6a79 crypto/fsl: Correct 64-bit write when MMU disabled by Saksham Jain · 9 years ago
  100. 4a97a0c armv8: fsl-lsch3: Disable SMMU during secure boot by Saksham Jain · 9 years ago