Gitiles
Code Review
Sign In
gerrit.devboardsforandroid.linaro.org
/
platform
/
external
/
u-boot
/
826f35f9b57c4581ff69d55c3bade9c3814e29bb
/
arch
/
arm
/
mach-mvebu
b20c38a
arm: mvebu: Add support for the Armada XP theadorable board
by Stefan Roese
· 9 years ago
913d1be
video: Add support for Armada XP LCD controller
by Stefan Roese
· 9 years ago
aefb8f4
mvebu: Support Synology DS414
by Phil Sutter
· 9 years ago
6202953
mvebu: Add rudimental MV78230 support
by Phil Sutter
· 9 years ago
4290252
mvebu: Introduce kconfig symbols for SoC variants
by Phil Sutter
· 9 years ago
beadff1
mvebu: axp: refactor board_sat_r_get() and caller
by Phil Sutter
· 9 years ago
9a04527
drivers/pci/pci_mvebu: Fix for boards with X4 lanes
by Phil Sutter
· 9 years ago
f4db6c9
arm: mvebu: Add runtime detection of UART (xmodem) boot-mode
by Stefan Roese
· 9 years ago
a5f8887
arm: mvebu: Add runtime boot-device detection
by Stefan Roese
· 9 years ago
a9fc5a2
arm: mvebu: Make local structs static const
by Stefan Roese
· 9 years ago
d35831f
arm: mvebu: Move SAR register defines into header
by Stefan Roese
· 9 years ago
81e33f4
arm: mvebu: Move SoC selection (A38X vs AXP) into Kconfig
by Stefan Roese
· 9 years ago
b322c83
arm: mvebu: Consolidate board Kconfig options into one file
by Stefan Roese
· 9 years ago
d718bf2
arm: mvebu: Print CPU and SDRAM frequency upon startup
by Stefan Roese
· 9 years ago
e25d5a9
arm: mvebu: Make serdes setup on Armada XP less noisy
by Stefan Roese
· 9 years ago
84877c6
arm: mvebu: Don't include "netdev.h" in cpu.c
by Stefan Roese
· 9 years ago
bf0db8b
arm: mvebu: Add support for MV78260
by Stefan Roese
· 9 years ago
00a457b
arm: mvebu: Don't use 0 as board ID as its used for the custom boards
by Stefan Roese
· 9 years ago
ab8a4c6
arm: mvebu: Simplify code in setup_usb_phys() a bit
by Stefan Roese
· 9 years ago
c86d53f
arm: mvebu: Don't disable cache at startup on Armada XP at all
by Stefan Roese
· 9 years ago
f4e6ec7
arm: mvebu: Don't call arch_cpu_init() from SPL at all
by Stefan Roese
· 9 years ago
f0e8173
arm: mvebu: Add v7_outer_cache_disable function for AXP & A38x
by Stefan Roese
· 9 years ago
3e5ce7c
arm: mvebu: Enable L2 cache on Armada XP
by Stefan Roese
· 9 years ago
0299c90
arm: mvebu: Add SolidRun ClearFog Armada 38x initial support
by Stefan Roese
· 9 years ago
8a02ec1
arm: mvebu: Move some defines to common include file
by Stefan Roese
· 9 years ago
e3b9c98
net: mvneta: Convert to driver model
by Stefan Roese
· 9 years ago
09a54c0
arm: mvebu: Add SPI driver model support
by Stefan Roese
· 9 years ago
6451223
arm: mvebu: Add DM and OF_CONTROL support to SPL
by Stefan Roese
· 9 years ago
2fbc18f
arm: mvebu/kirkwood: Use common timer functions
by Stefan Roese
· 9 years ago
9eb14cc
arm: mvebu: Configure ARP timeout and retry count
by Stefan Roese
· 9 years ago
490753a
arm: mvebu: a38x: serdes specification cleanup
by Kevin Smith
· 9 years ago
18c202a
arm: mvebu: a38x: Add const to some function calls
by Kevin Smith
· 9 years ago
544acb0
arm: mvebu: a38x: Remove unsupported topologies
by Kevin Smith
· 9 years ago
f8fdb81
compat: Remove is_power_of_2() definition
by Fabio Estevam
· 9 years ago
9cffb23
arm: mvebu: Add DM (driver model) support
by Stefan Roese
· 9 years ago
78de2c0
arm: mvebu: Do not call board_init_r() from board_init_f()
by Stefan Roese
· 9 years ago
42cc034
arm: mvebu: Only set CONFIG_SKIP_LOWLEVEL_INIT for SPL
by Stefan Roese
· 9 years ago
944c7a3
arm: mvebu: Add option to use UART xmodem protocol via kwboot
by Stefan Roese
· 9 years ago
c3d8914
arm: mvebu: Move Armada XP/38x Kconfig to mach specific Kconfig file
by Stefan Roese
· 9 years ago
787ddb7
arm: mvebu: timer.c: Explicitly move "init_done" var to data section
by Stefan Roese
· 9 years ago
cefd764
arm: mvebu: Fix internal register config on A38x
by Stefan Roese
· 9 years ago
92a3188
bitops: introduce BIT() definition
by Heiko Schocher
· 9 years ago
9c28d61
pci: mvebu: Add PCIe driver
by Anton Schubert
· 9 years ago
0ceb2da
arm: mvebu: Add complete SDRAM ECC scrubbing
by Stefan Roese
· 9 years ago
a8b57a9
arm: mvebu: dram.c: Rework dram_init() and dram_init_banksize()
by Stefan Roese
· 9 years ago
8a83c65
arm: mvebu: Display ECC enabled / disabled upon bootup
by Stefan Roese
· 9 years ago
dee40d2
arm: mvebu: Enable USB EHCI support on Armada XP
by Stefan Roese
· 9 years ago
2a0b7dc
arm: mvebu: Enable NAND controller on MVEBU SoC's
by Stefan Roese
· 9 years ago
501c098
arm: mvebu: Disable MBUS error propagation
by Stefan Roese
· 9 years ago
2b181b5
arm: mvebu: Flush caches and disable MMU only on A38x
by Stefan Roese
· 9 years ago
5b72dbf
arm: mvebu: Setup the MBUS bridge registers
by Stefan Roese
· 9 years ago
8ed20d6
arm: mvebu: Change MBUS base addresses and sizes
by Stefan Roese
· 9 years ago
8822fe1
arm: mvebu/armada100: dram.c: Remove CONFIG_SYS_BOARD_DRAM_INIT
by Stefan Roese
· 9 years ago
8ed43b9
arm: mvebu: Add SPL SDIO/MMC boot support
by Stefan Roese
· 9 years ago
ad6ac7a
arm: mvebu: a38x: Use correct PEX register access macros
by Stefan Roese
· 9 years ago
ff9112d
arm: mvebu: drivers/ddr: Move Armada XP DDR init code into new directory
by Stefan Roese
· 10 years ago
edb4702
arm: mvebu: Add Armada 38x SERDES / PHY init code from Marvell bin_hdr
by Stefan Roese
· 10 years ago
29b103c
arm: mvebu: serdes: Move Armada XP SERDES / PHY init code into new directory
by Stefan Roese
· 10 years ago
9f62b44
arm: mvebu: Disable MMU before changing register base address
by Stefan Roese
· 10 years ago
e3cccf9
arm: mvebu: spl.c: Add call to board_early_init_f()
by Stefan Roese
· 10 years ago
2142770
arm: mvebu: Use default reg base address for SPL on A38x
by Stefan Roese
· 10 years ago
ade741b
arm: mvebu: Call timer_init early before PHY and DDR init
by Stefan Roese
· 9 years ago
e863f7f
arm: mvebu: add Armada XP SATA support
by Anton Schubert
· 9 years ago
fe11ae2
usb: Add EHCI support for Armada 38x (mvebu)
by Stefan Roese
· 9 years ago
4d991cb
arm: mvebu: Add SATA/SCSI (AHCI) support for Armada A38x
by Stefan Roese
· 9 years ago
7f1adcd
arm: mvebu: Add SDIO/SDHCI support for Armada A38x
by Stefan Roese
· 9 years ago
e1b078e
arm: mvebu: Update CBAR with SOC regs base
by Kevin Smith
· 10 years ago
5730360
arm: mvebu: Disable L2 cache before enabling d-cache
by Stefan Roese
· 10 years ago
2083db7
arm: mvebu: Remove "u-boot.kwb" CONFIG_BUILD_TARGET for non-SPL targets
by Stefan Roese
· 10 years ago
60b7532
arm: mvebu: Add d-cache invalidate before enabling the d-cache
by Stefan Roese
· 10 years ago
e89bf8b
arm: mvebu: Remove coherency configuration
by Stefan Roese
· 10 years ago
cae9008
arm: mvebu: Change network init code to allow a more flexible setup
by Stefan Roese
· 10 years ago
9c6d3b7
arm: mvebu: Add basic Armada 38x support
by Stefan Roese
· 10 years ago
880b15a
arm: mvebu: Move CONFIG_SPL_LDSCRIPT to common header
by Stefan Roese
· 10 years ago
f7c0ef0
arm: mvebu: Only define MV88F78X60 for Armada XP
by Stefan Roese
· 10 years ago
8402b69
arm: mvebu: Remove unreferenced define
by Stefan Roese
· 10 years ago
250eea7
arm: mvebu: Change header macros from ARMADA_XP to MVEBU
by Stefan Roese
· 10 years ago
d078765
arm: mvebu: Move mvebu-common into mach-mvebu
by Stefan Roese
· 10 years ago
8cb7872
arm: armada-xp: Move SoC headers to mach-mvebu/include/mach
by Stefan Roese
· 10 years ago
350b50e
arm: armada-xp: Move SoC sources to mach-mvebu
by Stefan Roese
· 10 years ago