1. 9ed887c Merge branch 'u-boot-imx/master' into 'u-boot-arm/master' by Albert ARIBAUD · 11 years ago
  2. 425faf7 Add TI816X evm board support by TENART Antoine · 11 years ago
  3. 03efcb0 arm, da850: add ipam390 board support by Heiko Schocher · 11 years ago
  4. 7f442e3 bootstage: get more BOOTSTAGE_ID* in show_boot_progress() by Heiko Schocher · 11 years ago
  5. a1665ed TI:armv7: Enable CONFIG_CMD_GPIO by Tom Rini · 11 years ago
  6. 0fedc4a TI:armv7: Enable CONFIG_CMD_SPI by Tom Rini · 11 years ago
  7. a801757 TI:omap5/dra7xx: Convert to ti_armv7_common.h by Tom Rini · 11 years ago
  8. 8769455 TI:am33xx: Create common config files for TI ARMv7 platforms, and AM33xx by Tom Rini · 11 years ago
  9. bc6fff9 am335x_evm: Bring in 'boot_fdt' logic from i.MX by Tom Rini · 11 years ago
  10. 4db4076 am335x_evm: Use default baud rate table by Tom Rini · 11 years ago
  11. 73feefd am33xx: Stop using PHYS_DRAM_1 define by Tom Rini · 11 years ago
  12. dd5729a am33xx: CONFIG_DMA_COHERENT defines are unused, remove by Tom Rini · 11 years ago
  13. a2fa28b OMAP3: igep00x0: allow booting with a FDT from MMC by Javier Martinez Canillas · 11 years ago
  14. 2be6bed ARM: igep00x0.h: Enable the use of CMD_EXT4, CMD_FS_GENERIC and zImage. by Enric Balletbo i Serra · 11 years ago
  15. 5c119cb ARM: IGEP0033: Remove duplicate / unused #defines. by Enric Balletbo i Serra · 11 years ago
  16. cf8d005 ARM: IGEP0033: Add support to boot from NAND. by Enric Balletbo i Serra · 11 years ago
  17. 2e6bc67 ARM: IGEP0033: Add support for Flattened Device Tree. by Enric Balletbò i Serra · 11 years ago
  18. d69cc4a ARM: IGEP0033: Remove undef of CONFIG_CMD_MEMTEST by Enric Balletbo i Serra · 11 years ago
  19. 8d0afcd ARM: AM43xx: Add config file by Lokesh Vutla · 11 years ago
  20. 806d279 ARM: OMAP: Add CONFIG_OMAP_COMMON by Lokesh Vutla · 11 years ago
  21. 326ea98 Merge git://git.denx.de/u-boot-arm by Stefano Babic · 11 years ago
  22. fdce7b6 gpio: omap5-uevm: Configure the tca6424 gpio expander by Dan Murphy · 11 years ago
  23. 61c1775 gpio: tca642x: Add the tca642x gpio expander driver by Dan Murphy · 11 years ago
  24. 8c6ede1 am335x_evm: Add support for eMMC environment by Justin Waters · 11 years ago
  25. a3aa70a am335x_evm: Rework bootcmd to handle two MMC devs by Justin Waters · 11 years ago
  26. 2c7c03b am335x_evm: Add command line editing by Justin Waters · 11 years ago
  27. 317fab2 am335x_evm: Make NAND support modular by Justin Waters · 11 years ago
  28. c5c7a7c am335x_evm: Add support to boot from NOR. by Steve Kipisz · 11 years ago
  29. cd8845d am335x_evm: Add support for the NOR module on the memory cape by Steve Kipisz · 11 years ago
  30. 6454028 am335x_evm: Update SPI_BOOT support, add MTDPARTS info by Tom Rini · 11 years ago
  31. 989bd7a am335x_evm: Drop useless CONFIG_ENV_IS_NOWHERE by Tom Rini · 11 years ago
  32. 58cc978 mx6qsabresd: Add splash screen support via HDMI by Pardeep Kumar Singla · 11 years ago
  33. 5ea7f0e mx6: Factor out common HDMI setup code by Pardeep Kumar Singla · 11 years ago
  34. ea70690 omap3_beagle: support booting from zImage and device tree as last option by Nishanth Menon · 11 years ago
  35. 2ade496 omap3_beagle: support findfdt and loadfdt for devicetree support by Nishanth Menon · 11 years ago
  36. 102ce9e omap3_beagle: enable CMD_FS_GENERIC and simplify load of image/ramdisk by Nishanth Menon · 11 years ago
  37. a33e3c7 omap3_beagle: replace uImage.beagle with generic uImage by Nishanth Menon · 11 years ago
  38. 664979a omap3_beagle: remove JFFS2 support. by Nishanth Menon · 11 years ago
  39. c9be62c ARM: DRA7xx: Enable CPSW Ethernet support by Mugunthan V N · 11 years ago
  40. 2bf36ac drivers: net: cpsw: remove hard coding bd ram for cpsw by Mugunthan V N · 11 years ago
  41. a7d39af am335x_evm: Correct CONFIG_CMD_SPL_WRITE_SIZE by Tom Rini · 11 years ago
  42. 3afd8e0 am335x_evm: Update eMMC falcon mode locations by Tom Rini · 11 years ago
  43. d789599 am335x_evm: Correct DFU ALT settings for falcon mode by Tom Rini · 11 years ago
  44. f8b1e86 mx6qsabrelite: Remove mx6qsabrelite code in favor of nitrogen6x by Fabio Estevam · 11 years ago
  45. 8b485ba Merge branch 'u-boot/master' into u-boot-arm/master by Albert ARIBAUD · 11 years ago
  46. aaf5e82 Merge branch 'master' of git://git.denx.de/u-boot-nds32 by Tom Rini · 11 years ago
  47. 0b17998 qemu-malta: Update for SPDX license identifiers by Tom Rini · 11 years ago
  48. 230187c Merge branch 'master' of git://git.denx.de/u-boot-mips by Tom Rini · 11 years ago
  49. 76116f2 highbank: enable keyed autoboot stop by Rob Herring · 11 years ago
  50. 76c3999 ARM: highbank: setup peripherals based on power domain status by Rob Herring · 11 years ago
  51. e1df283 ARM: highbank: enable reset on command timeout by Rob Herring · 11 years ago
  52. 185a5bb ARM: highbank: update config options by Rob Herring · 11 years ago
  53. f195749 MIPS: qemu-malta: bring up ethernet by Gabor Juhos · 11 years ago
  54. feaa606 MIPS: qemu-malta: add PCI support by Gabor Juhos · 11 years ago
  55. 52caee0 MIPS: qemu-malta: enable flash support by Gabor Juhos · 11 years ago
  56. 5a4dcfa MIPS: qemu-malta: add support for emulated MIPS Malta board by Gabor Juhos · 11 years ago
  57. a79b5e6 MIPS: import gt64120.h header from Linux by Gabor Juhos · 11 years ago
  58. c2120fb Merge branch 'master' of git://git.denx.de/u-boot-i2c by Tom Rini · 11 years ago
  59. e85427f Add eCos-2.0 SPDX-License-Identifier to source files by Wolfgang Denk · 11 years ago
  60. eee479c Add LGPL-2.1+ SPDX-License-Identifier to source files by Wolfgang Denk · 11 years ago
  61. 1a45966 Add GPL-2.0+ SPDX-License-Identifier to source files by Wolfgang Denk · 11 years ago
  62. d727ab3 wandboard: Use splash image at screen center by default by Otavio Salvador · 11 years ago
  63. 5434caf ARM: mxs: Consolidate configuration options by Marek Vasut · 11 years ago
  64. e3c58b0 nds32: Enable the function of passing parameters to Linux by ken kuo · 11 years ago
  65. 61ccf08 nds32: Enable SDIO and EXT2 command support for Andes board by ken kuo · 11 years ago
  66. 3c01670 nds32: Enable two banks of SDRAM on Andes board by ken kuo · 11 years ago
  67. 8599515 pci: move pci_ftpci100.h to include/faraday/ftpci100.h by Gabor Juhos · 11 years ago
  68. c575180 block: constify sect_buf argument of ide_write_data by Gabor Juhos · 11 years ago
  69. ecbd7e1 fdtdec: Add compatible string for High speed i2c by naveen krishna chatradhi · 11 years ago
  70. 1221b3d vf610: Add I2C support for Vybrid VF610 platform by Alison Wang · 11 years ago
  71. 67bfae3 arm/km: fix u-boot update functionality by Holger Brunck · 11 years ago
  72. 880540d i2c, ppc4xx_i2c: switch to new multibus/multiadapter support by Dirk Eibach · 11 years ago
  73. 1f2ba72 tegra: i2c: Enable new CONFIG_SYS_I2C framework by Simon Glass · 12 years ago
  74. f3e9361 i2c, multibus, keymile: get rid of EEprom_ivm envvariable by Heiko Schocher · 12 years ago
  75. 9a2accb i2c, multibus: get rid of CONFIG_I2C_MUX by Heiko Schocher · 12 years ago
  76. 00f792e i2c, fsl_i2c: switch to new multibus/multiadapter support by Heiko Schocher · 12 years ago
  77. ea818db i2c, soft-i2c: switch to new multibus/multiadapter support by Heiko Schocher · 12 years ago
  78. 3f4978c i2c: common changes for multibus/multiadapter support by Heiko Schocher · 13 years ago
  79. 385c9ef i2c: add i2c_core and prepare for new multibus support by Heiko Schocher · 13 years ago
  80. 4ef400b arm:trats:fix: Correction of loaddtb environment variable. by Łukasz Majewski · 11 years ago
  81. b9944a7 mpc85xx: Add gdsys ControlCenter Digital board by Dirk Eibach · 11 years ago
  82. be6c152 tpm: add AUTH1 cmds for LoadKey2 and GetPubKey by Reinhard Pfau · 11 years ago
  83. 04735e9 Fix ext2/ext4 filesystem accesses beyond 2TiB by Frederic Leroy · 11 years ago
  84. 54e458d Revert "MIPS: Jz4740: Add qi_lb60 board support" by Tom Rini · 11 years ago
  85. fbbbc86 Merge branch 'master' of git://git.denx.de/u-boot-arm by Tom Rini · 11 years ago
  86. f320a4d bootm: Use selected configuration for ramdisk and fdt by Simon Glass · 11 years ago
  87. efc284e Merge branch 'u-boot-imx/master' into 'u-boot-arm/master' by Albert ARIBAUD · 11 years ago
  88. a3f170c mx53ard: Change default environment to cope with OE changes by Otavio Salvador · 11 years ago
  89. e97721c mx51evk: Change default environment to cope with OE changes by Otavio Salvador · 11 years ago
  90. 86812c4 wandboard: Change default environment to cope with OE changes by Otavio Salvador · 11 years ago
  91. 94aeb8a mx6slevk: Change default environment to cope with OE changes by Otavio Salvador · 11 years ago
  92. 2169228 mx6qsabrelite: Change default environment to cope with OE changes by Otavio Salvador · 11 years ago
  93. 254fd8d mx53loco: Change default environment to cope with OE changes by Otavio Salvador · 11 years ago
  94. 32cc24d m28evk: add trimffs to nand command by Marek Vasut · 11 years ago
  95. d035fcf ARM: tegra: enable LCD panel on Ventana by Stephen Warren · 11 years ago
  96. b46694d ARM: tegra: enable LCD panel on Harmony by Stephen Warren · 11 years ago
  97. d6cf707 Tegra: Config: Enable Tegra30/Tegra114 USB function by Jim Lin · 11 years ago
  98. 7e44d93 ARM: Tegra: USB: EHCI: Add support for Tegra30/Tegra114 by Jim Lin · 11 years ago
  99. 630aacb Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master' by Albert ARIBAUD · 11 years ago
  100. a5266d6 bootm: Clean up bootz_setup() function by Simon Glass · 11 years ago