1. 1a6828d sunxi: remove unneeded i2c_init_board() call for U-Boot proper by Andre Przywara · 11 months ago
  2. d17d051 power: pmic: sunxi: add AXP313 SPL driver by Andre Przywara · 1 year, 4 months ago
  3. f054f12 arm: sunxi: Correct warning in board_fit_config_name_match by Tom Rini · 1 year, 5 months ago
  4. ffb0294 sunxi: board: simplify early PMIC setup conditions by Andre Przywara · 3 years, 5 months ago
  5. 5b7c58f sunxi: R528: add SMHC2 pin pull ups support by Okhunjon Sobirjonov · 1 year, 2 months ago
  6. 207ed0a pinctrl: sunxi: remove GPIO_EXTRA_HEADER by Andre Przywara · 2 years, 3 months ago
  7. 5ad98c5 sunxi: remove CONFIG_MACPWR by Andre Przywara · 2 years, 6 months ago
  8. ae79c1d sunxi: remove CONFIG_SATAPWR by Andre Przywara · 2 years, 5 months ago
  9. 1e94b46 common: Drop linux/printk.h from common header by Simon Glass · 1 year, 3 months ago
  10. 1a549c8 crc32: Drop duplicates crc header includes by Ilya Lukin · 1 year, 5 months ago
  11. 21b790f mtd: nand: sunxi: Convert to the driver model by Samuel Holland · 1 year, 10 months ago
  12. 6453149 sunxi: board: annotate #endif lines by Andre Przywara · 2 years ago
  13. eeaca6a sunxi: remove bogus mmc_pinmux_setup() prototype by Andre Przywara · 2 years ago
  14. ed82586 sunxi: remove unused CONFIG_MMC_SUNXI_SLOT by Andre Przywara · 2 years ago
  15. e008e51 sunxi: fix initial environment loading without MMC by Samuel Holland · 2 years, 7 months ago
  16. 3ba0a25 sunxi: Skip MMC0 init when its pinmux conflicts with UART0 by Samuel Holland · 2 years, 8 months ago
  17. 151a030 arm: set cntfrq_el0 if CONFIG_COUNTER_FREQUENCY is valid by Peng Fan · 2 years, 8 months ago
  18. 8c2bdff sunxi: Remove non-DM MMC pin setup by Samuel Holland · 3 years, 3 months ago
  19. aadf3d5 sunxi: Remove options and setup code for I2C2-I2C4 by Samuel Holland · 3 years, 1 month ago
  20. e943753 sunxi: Fix old GMAC pinmux setup by Andre Przywara · 2 years, 9 months ago
  21. e42dad4 sunxi: use boot source for determining environment location by Andre Przywara · 2 years, 11 months ago
  22. 116e1ed sunxi: board: Add support for SUNIV by Icenowy Zheng · 2 years, 10 months ago
  23. 52bcc4f sunxi: Add option to prevent booting on power plug-in by Chris Morgan · 2 years, 10 months ago
  24. 2753b07 sunxi: call fdt_fixup_ethernet again to set macaddr for more aliases by Icenowy Zheng · 3 years, 3 months ago
  25. 2f8a6db Finish conversion of CONFIG_SYS_CLK_FREQ to Kconfig by Tom Rini · 3 years ago
  26. fbd9207 sunxi: Remove misleading USB-OTG charger message by Andre Przywara · 3 years, 1 month ago
  27. 2421497 sunxi: video: Convert panel I2C to use DM_I2C by Samuel Holland · 3 years, 2 months ago
  28. 4250846 sunxi: Clean up inclusions of asm/arch/gpio.h by Samuel Holland · 3 years, 3 months ago
  29. 8f872bb board: sunxi: enable status LED early by Arnaud Ferraris · 3 years, 3 months ago
  30. dda9fa7 sunxi: Simplify MMC pinmux selection by Samuel Holland · 3 years, 3 months ago
  31. de69572 Convert CONFIG_SYS_I2C_SOFT et al to Kconfig by Tom Rini · 3 years, 4 months ago
  32. 1011ebc sunxi: Select environment MMC based on boot device by Samuel Holland · 3 years, 8 months ago
  33. 212224e sunxi: board: Add H616 MMC2 pins by Andre Przywara · 3 years, 7 months ago
  34. 2147a16 dm: i2c: use CONFIG_IS_ENABLED macro for DM_I2C/DM_I2C_GPIO by Igor Opaniuk · 3 years, 10 months ago
  35. 401d1c4 common: Drop asm/global_data.h from common header by Simon Glass · 4 years, 1 month ago
  36. d0b07c1 sunxi: add support for R_I2C on H616 by Jernej Skrabec · 3 years, 11 months ago
  37. fbd37d8 sunxi: Add support for AXP305 PMIC by Jernej Skrabec · 3 years, 11 months ago
  38. e9ad1b8 sunxi: Properly check for SATAPWR and MACPWR by Andre Przywara · 3 years, 11 months ago
  39. 9267ff8 sunxi: board: add a config option to fixup a Bluetooth address by Andre Heider · 3 years, 2 months ago
  40. 928f4f4 sunxi: board: extract creating a unique sid into a helper function by Andre Heider · 3 years, 2 months ago
  41. 92600ed sunxi: board: Move USB ethernet initialization to board_late_init() by Andy Shevchenko · 4 years ago
  42. 8c51c65 sunxi: allow to use AXP20[39] attached to I2C0 on V3 series by Icenowy Zheng · 4 years, 1 month ago
  43. 20f3ee3 sunxi: board: Set fdtfile to match the DT chosen by SPL by Samuel Holland · 4 years, 1 month ago
  44. 41530cf sunxi: board: Save the chosen DT name in the SPL header by Samuel Holland · 4 years, 1 month ago
  45. 8a8b73b sunxi: board: Add PinePhone DT selection logic by Samuel Holland · 4 years, 1 month ago
  46. 54ac5aa sunxi: board: Simplify Pine A64 DT selection logic by Samuel Holland · 4 years, 1 month ago
  47. 467b7e5 sunxi: board: Add a helper to get the SPL DT name by Samuel Holland · 4 years, 1 month ago
  48. 2fcd748 sunxi: board: Use a more descriptive variable name by Samuel Holland · 4 years, 1 month ago
  49. f286e37 board: sunxi: change trace level for phy errors managed by uclass by Patrick Delaunay · 4 years, 5 months ago
  50. b75d8dc treewide: convert bd_t to struct bd_info by coccinelle by Masahiro Yamada · 4 years, 5 months ago
  51. c05ed00 common: Drop linux/delay.h from common header by Simon Glass · 4 years, 7 months ago
  52. f7ae49f common: Drop log.h from common header by Simon Glass · 4 years, 7 months ago
  53. 4d72caa common: Drop image.h from common header by Simon Glass · 4 years, 7 months ago
  54. db41d65 common: Move hang() to the same header as panic() by Simon Glass · 5 years ago
  55. 9b4a205 common: Move RAM-sizing functions to init.h by Simon Glass · 5 years ago
  56. 3db7110 crc32: Use the crc.h header for crc functions by Simon Glass · 5 years ago
  57. f3998fd env: Rename environment.h to env_internal.h by Simon Glass · 5 years ago
  58. c7694dd env: Move env_set_hex() to env.h by Simon Glass · 5 years ago
  59. a7ae159 sunxi: board: do MMC pinmux setup for DM_MMC builds by Andre Przywara · 6 years ago
  60. da1ae59 sunxi: board: Add i2c initialization for sun50i by Stefan Mavrodiev · 6 years ago
  61. 44c214d Revert "sunxi: board: Print error after power initialization fails" by From: Karl Palsson · 6 years ago
  62. 48d299a Merge branch 'master' of git://git.denx.de/u-boot-usb by Tom Rini · 6 years ago
  63. a740ee9 lib: merge CRC16-CCITT into u-boot/crc.h by Philipp Tomsich · 6 years ago
  64. a8011eb sunxi: board: Print error after power initialization fails by Olliver Schinagl · 6 years ago
  65. 0131162 dm: usb: create a new UCLASS ID for USB gadget devices by Jean-Jacques Hiblot · 6 years ago
  66. 31a4ac4 sun50i: A64: add support for R_I2C controller by Vasily Khoruzhick · 6 years ago
  67. 5776610 sunxi: store DRAM size in SPL header by Andre Przywara · 6 years ago
  68. cff5c13 sunxi: board.c: refactor SPL header checks by Andre Przywara · 6 years ago
  69. 55d481d sunxi: Extend SPL header versioning by Andre Przywara · 6 years ago
  70. c6c2c85 sunxi: disable Pine A64 model detection code on other boards by Icenowy Zheng · 6 years ago
  71. d802407 board: sunxi: Remove unused local variables by Jagan Teki · 6 years ago
  72. 42956f1 sunxi: add MMC support for H6 by Icenowy Zheng · 6 years ago
  73. f5871a6 sunxi: Drop legacy usb_phy.c by Jagan Teki · 7 years ago
  74. 237050f board: sunxi: Use generic-phy for board_usb_cable_connected by Jagan Teki · 7 years ago
  75. 83d290c SPDX: Convert all of our single license tags to Linux Kernel style by Tom Rini · 7 years ago
  76. 136e325 sunxi: spl: remove DMA related settings of the NAND controller by Miquel Raynal · 7 years ago
  77. ba1c98b sunxi: spl: deassert the NAND controller reset line by Miquel Raynal · 7 years ago
  78. b08c8c4 libfdt: move headers to <linux/libfdt.h> and <linux/libfdt_env.h> by Masahiro Yamada · 7 years ago
  79. b39117c sunxi: Transition from the MMC to a FAT-based environment by Maxime Ripard · 7 years ago
  80. 8e2c2d4 sunxi: SATA link timeout fix by Werner Böllmann · 7 years ago
  81. e6ee85a sunxi: only init USB Ethernet gadget when it's enabled by Icenowy Zheng · 7 years ago
  82. de86fc3 sunxi: Remove the MMC index hack by Maxime Ripard · 7 years ago
  83. f4c3523 sunxi: Use sunxi_get_boot_device by Maxime Ripard · 7 years ago
  84. 90dd2f1 sunxi: Register usb_ether by Maxime Ripard · 7 years ago
  85. 3a61b08 musb: sunxi: switch to the device model by Maxime Ripard · 7 years ago
  86. 00caae6 env: Rename getenv/_f() to env_get() by Simon Glass · 7 years ago
  87. fd1e959 env: Rename eth_setenv_enetaddr() to eth_env_set_enetaddr() by Simon Glass · 7 years ago
  88. 018f530 env: Rename common functions related to setenv() by Simon Glass · 7 years ago
  89. 382bee5 env: Rename setenv() to env_set() by Simon Glass · 7 years ago
  90. 5d98285 arm: Include asm/setup.h explictly by Simon Glass · 8 years ago
  91. 54254ba sunxi: use SPL header DT name for FIT board matching by Andre Przywara · 8 years ago
  92. 9ea3c35 sunxi: SPL: add FIT config selector for Pine64 boards by Andre Przywara · 8 years ago
  93. 414eb6f sunxi: SPL: store RAM size in gd by Andre Przywara · 8 years ago
  94. 4aa2ba3 mmc: replace CONFIG_GENERIC_MMC with CONFIG_MMC by Masahiro Yamada · 8 years ago
  95. a8f01cc sunxi: i2c: Add support for DM I2C by Jernej Skrabec · 8 years ago
  96. acbc7e0 sunxi: Move function for later convenience by Jernej Skrabec · 8 years ago
  97. 8094a4a sunxi: Add mmc[1-3] pinmux settings for R40 by Chen-Yu Tsai · 8 years ago
  98. 379feba sunxi: Add initial support for R40 by Chen-Yu Tsai · 8 years ago
  99. f5fd788 sunxi: Convert CONFIG_MACPWR to Kconfig by Mylène Josserand · 8 years ago
  100. d7b560e sunxi: Convert CONFIG_SATAPWR to Kconfig by Mylène Josserand · 8 years ago