1. 91f9f17 ARM: zynq: DT: Add zc702 pushbuttons to DT as gpio-keys by Michal Simek · 9 years ago
  2. d50cb3d ARM: zynq: DT: Add missing interrupt for L2 pl310 by Michal Simek · 9 years ago
  3. b4e9eaf ARM: zynq: DT: Get rid of ps-clk-frequency by Michal Simek · 9 years ago
  4. 05e7ca6 ARM: zynq: DT: Update years in copyright by Michal Simek · 9 years ago
  5. 999667c ARM: zynq: DT: Sync zc702/zc706/zed/zybo DT with kernel by Michal Simek · 9 years ago
  6. 461c388 ARM: zynq: DT: Add reference to bus node by Michal Simek · 9 years ago
  7. e913ce2 ARM: zynq: DT: Add pinctrl node by Michal Simek · 9 years ago
  8. 5ee236a ARM: zynq: DT: Cleanup address-cells and size-cells by Michal Simek · 9 years ago
  9. b346bd1 ARM: zynq: DT: Clean up timer device tree nodes by Michal Simek · 9 years ago
  10. 7e16336 ARM: zynq: DT: Use the zynq binding with macb by Michal Simek · 9 years ago
  11. 08305fe ARM: zynq: DT: Fix GEM register area size by Michal Simek · 9 years ago
  12. 40b383f spi: Fix zynq SPI binding by Michal Simek · 9 years ago
  13. 3ffcdc7 ARM: zynq: DT: Remove 222 MHz OPP by Michal Simek · 9 years ago
  14. 8a8c46a ARM: zynq: DT: Migrate UART to Cadence binding by Michal Simek · 9 years ago
  15. bece06c ARM: zynq: DT: Add a fixed regulator for CPU voltage by Michal Simek · 9 years ago
  16. fb1a506 ARM: zynq: DT: Add missing nodes to DTSI by Michal Simek · 9 years ago
  17. a0cb47f ARM: zynq: DT: Use the right names for nodes by Michal Simek · 9 years ago
  18. 225bf9a zynqmp: Add support for IP detection via SLCR by Michal Simek · 9 years ago
  19. fb10116 zynqmp: mp: Simplify set_r5_start handling by Michal Simek · 9 years ago
  20. 0b54a9d zynqmp: Define ep config for ZynqMP by Siva Durga Prasad Paladugu · 9 years ago
  21. 7558000 zynqmp: Kconfig: Move zynqmp Kconfig by Siva Durga Prasad Paladugu · 9 years ago
  22. 502a2af arm64: Handle arbitrary CONFIG_SYS_MALLOC_F_LEN values by Thierry Reding · 9 years ago
  23. f49357b ARM: tegra: Build warning fixes for 64-bit by Thierry Reding · 9 years ago
  24. 537e967 tegra124: Implement spl_was_boot_source() by Simon Glass · 9 years ago
  25. fffde77 stm32f4: add cpu clock option for 180 MHz by Antonio Borneo · 9 years ago
  26. 089fddf stm32f429: pass the device unique ID in DTB by Antonio Borneo · 9 years ago
  27. b0c8f4a Kill unneeded #include <linux/kconfig.h> by Masahiro Yamada · 9 years ago
  28. bafa6f5 am33xx: Unused get_board_rev function removal by Paul Kocialkowski · 9 years ago
  29. fb9006c omap3: CONFIG_REVISION_TAG ifdef check for get_board_rev by Paul Kocialkowski · 9 years ago
  30. d1a04b3 omap5: Definitions for SYS_BOOT-based fallback boot device selection by Paul Kocialkowski · 9 years ago
  31. 94fc751 omap4: Definitions for SYS_BOOT-based fallback boot device selection by Paul Kocialkowski · 9 years ago
  32. cfac375 omap3: Definitions for SYS_BOOT-based fallback boot device selection by Paul Kocialkowski · 9 years ago
  33. ed19bda omap-common: SYS_BOOT-based fallback boot device selection for peripheral boot by Paul Kocialkowski · 9 years ago
  34. df84477 omap-common: Boot device define instead of hardcoded value by Paul Kocialkowski · 9 years ago
  35. 62c5674 omap: SPL boot devices cleanup and completion by Paul Kocialkowski · 9 years ago
  36. 60c7c30 omap-common: Common boot code OMAP3 support and cleanup by Paul Kocialkowski · 9 years ago
  37. 17c5bda keystone2: add wfi in to the core_spin loop by Vitaly Andrianov · 9 years ago
  38. 2647394 Merge branch 'master' of http://git.denx.de/u-boot-sunxi by Tom Rini · 9 years ago
  39. a51c832 sunxi: ga10h: Enable both otg and regular usb host controllers by Hans de Goede · 9 years ago
  40. 9ecce97 sunxi: musb: Stop treating not having a vbus-det gpio as an error by Hans de Goede · 9 years ago
  41. 91183ba sunxi: musb: Use device-model for musb host mode by Hans de Goede · 9 years ago
  42. d42faf3 sunxi: musb: Move musb config and platdata to the sunxi-musb glue by Hans de Goede · 9 years ago
  43. 48c06c9 sunxi: usb-phy: Add support for reading otg id pin value by Hans de Goede · 9 years ago
  44. de1502c sunxi: Enable CMD_USB and USB_STORAGE by default on sunxi by Hans de Goede · 9 years ago
  45. 4536882 sunxi: Update selects in arch/arm/Kconfig for DM conversions by Tom Rini · 9 years ago
  46. d08980d sunxi: Remove bogus uart entry from utoo-p66 dts file by Hans de Goede · 9 years ago
  47. 6f4e050 Merge git://git.denx.de/u-boot-usb by Tom Rini · 9 years ago
  48. a151403 sunxi: spl: Detect at runtime where SPL was read from by Daniel Kochmański · 9 years ago
  49. 645c48f sunxi: Create helper function veryfing valid boot signature on MMC by Daniel Kochmański · 9 years ago
  50. 8ed43b9 arm: mvebu: Add SPL SDIO/MMC boot support by Stefan Roese · 9 years ago
  51. 413978d Merge git://git.denx.de/u-boot-uniphier by Tom Rini · 9 years ago
  52. f1d7945 ARM: dts: UniPhier: add I2C ch4 device node for PH1-sLD3 by Masahiro Yamada · 9 years ago
  53. 3365b4e ARM: UniPhier: add PH1-sLD3 SoC support by Masahiro Yamada · 9 years ago
  54. 6b71e6d ARM: dts: UniPhier: add device-specific compatible string for EEPROM by Masahiro Yamada · 9 years ago
  55. 3c9cc70 Merge git://git.denx.de/u-boot-marvell by Tom Rini · 9 years ago
  56. ad6ac7a arm: mvebu: a38x: Use correct PEX register access macros by Stefan Roese · 9 years ago
  57. ff9112d arm: mvebu: drivers/ddr: Move Armada XP DDR init code into new directory by Stefan Roese · 10 years ago
  58. edb4702 arm: mvebu: Add Armada 38x SERDES / PHY init code from Marvell bin_hdr by Stefan Roese · 9 years ago
  59. 29b103c arm: mvebu: serdes: Move Armada XP SERDES / PHY init code into new directory by Stefan Roese · 9 years ago
  60. 9f62b44 arm: mvebu: Disable MMU before changing register base address by Stefan Roese · 9 years ago
  61. e3cccf9 arm: mvebu: spl.c: Add call to board_early_init_f() by Stefan Roese · 9 years ago
  62. 2142770 arm: mvebu: Use default reg base address for SPL on A38x by Stefan Roese · 9 years ago
  63. ade741b arm: mvebu: Call timer_init early before PHY and DDR init by Stefan Roese · 9 years ago
  64. e863f7f arm: mvebu: add Armada XP SATA support by Anton Schubert · 9 years ago
  65. 854cbd2 usb: gadget: bcm_udc_otg files by Jiandong Zheng · 9 years ago
  66. 17da3c0 usb: Fastboot function config for better consistency with other functions by Paul Kocialkowski · 9 years ago
  67. 909a1ab include: usb: Move USB controller base address mapping by Nikhil Badola · 9 years ago
  68. d09e401 arch: arm: fsl: Add XHCI support for LS1021A by Ramneek Mehresh · 9 years ago
  69. 30db918 zynq: Rename struct clk_ops to zynq_clk_ops by Simon Glass · 9 years ago
  70. 4eae498 dm: arm: Put driver model I2C drivers before legacy ones by Simon Glass · 9 years ago
  71. fa78e0a dm: Reduce SPL device tree size by Simon Glass · 9 years ago
  72. db14f11 armv8/fsl-lsch3: Fix TCR_EL3 for the final MMU setup. by Zhichun Hua · 9 years ago
  73. 21a257b armv8: Fix TCR macros for shareability attribute by Zhichun Hua · 9 years ago
  74. e71a980 armv8/ls2085aqds: DSPI pin muxing configure through QIXIS by Haikun Wang · 9 years ago
  75. b0e209d armv8/ls2085a: Enable DSPI get input clk form 'mxc_get_clock' by Haikun Wang · 9 years ago
  76. 193e7e5 arm/dts/ls2085a: Add dts files for LS2085AQDS and LS2085ARDB by Haikun Wang · 9 years ago
  77. fe69a0e arm/dts/ls2085a: Add DSPI dts node by Haikun Wang · 9 years ago
  78. d941f71 arm/dts/ls2085a: Bring in ls2085a dts files from linux kernel by Haikun Wang · 9 years ago
  79. 88c857d arm/ls102xa: Add little-endian mode support for audio IPs by Alison Wang · 9 years ago
  80. 340848b arm/ls102xa: Add PSCI support for ls102xa by Wang Dongsheng · 9 years ago
  81. 972af2a ARMv7: Factor out reusable timer_wait from sunxi/psci_sun7i.S by Wang Dongsheng · 9 years ago
  82. 49a5e42 arm: ls1021a: Remove the inappropriate use of the function 'sprintf' by Alison Wang · 9 years ago
  83. 70e52d2 armv8/fsl-lsch3: device tree fixups for PCI stream IDs by Stuart Yoder · 9 years ago
  84. 39da644 armv8/fsl-lsch3: partition stream IDs by Stuart Yoder · 9 years ago
  85. f299b5b arm/errata: Update required bits for A57 cores erratas by Bhupesh Sharma · 9 years ago
  86. 092da48 armv8/ls2085a: Update SoC README for DDR layout by Prabhakar Kushwaha · 9 years ago
  87. 2262966 armv8/fsl-ch3: Add support to print SoC personality by Prabhakar Kushwaha · 9 years ago
  88. d4c711f armv8/fsl-lsch3: Fix DDR speed message by York Sun · 9 years ago
  89. 5be3b44 armv8/ls2085a: call ft_pcie_setup() to change dts status by Prabhakar Kushwaha · 9 years ago
  90. f448c5d Merge branch 'master' of git://git.denx.de/u-boot by Stefano Babic · 9 years ago
  91. 4905dfc Merge branch 'master' of git://git.denx.de/u-boot-spi by Tom Rini · 9 years ago
  92. fe11ae2 usb: Add EHCI support for Armada 38x (mvebu) by Stefan Roese · 9 years ago
  93. 4d991cb arm: mvebu: Add SATA/SCSI (AHCI) support for Armada A38x by Stefan Roese · 9 years ago
  94. 7f1adcd arm: mvebu: Add SDIO/SDHCI support for Armada A38x by Stefan Roese · 9 years ago
  95. b44e60a i2c: fix vf610 support by Albert ARIBAUD \(3ADEV\) · 9 years ago
  96. 29067ab iMX: adding parsing to hab_status command by Ulises Cardenas · 9 years ago
  97. 19c6ec7 imx: mx6 add i2c4 clock support for i.MX6SX by Peng Fan · 9 years ago
  98. 2d59acc imx: mx6 remove duplicated enable_cspi_clock by Peng Fan · 9 years ago
  99. 8fa2e20 sunxi: Adjust Ippo_q8h_v1_2_a33_1024x600 dts filename to match the upstream kernel by Hans de Goede · 9 years ago
  100. 3cbb15d Merge branch 'master' of git://git.denx.de/u-boot-arm by Tom Rini · 9 years ago