Gitiles
Code Review
Sign In
gerrit.devboardsforandroid.linaro.org
/
platform
/
external
/
u-boot
/
89024ddc9ea63be4f71815a6a915fb3a58268d81
/
arch
/
arm
/
include
/
asm
/
arch-sunxi
9946631
sunxi: add clock configuration of R40 sata
by Icenowy Zheng
· 7 years ago
5600945
sunxi: video: Add A64/H3/H5 HDMI driver
by Jernej Skrabec
· 8 years ago
c199489
sunxi: add basic V3s support
by Icenowy Zheng
· 7 years ago
1ae5def
sunxi: Add clock support for DE2/HDMI/TCON on newer SoCs
by Jernej Skrabec
· 8 years ago
30ca202
sunxi: video: Convert lcdc to use struct display_timing
by Jernej Skrabec
· 8 years ago
5e023e7
sunxi: video: Split out TCON code
by Jernej Skrabec
· 8 years ago
acef236
sunxi: Fix CPUCFG address for R40
by Chen-Yu Tsai
· 8 years ago
8201188
sunxi: Use H3/A64 DRAM initialization code for R40
by Chen-Yu Tsai
· 8 years ago
328ce7f
sunxi: Set PLL lock enable bits for R40
by Chen-Yu Tsai
· 8 years ago
6c7ae2b
sunxi: Fix watchdog reset function for R40
by Chen-Yu Tsai
· 8 years ago
7b82a22
sunxi: prepare for sharing MACH_SUN8I_H3 config symbol
by Andre Przywara
· 8 years ago
170817a
sunxi: DRAM: add Allwinner H5 support
by Andre Przywara
· 8 years ago
bc613d8
sunxi: Kconfig: introduce CONFIG_SUNXI_HIGH_SRAM
by Andre Przywara
· 8 years ago
1bc464b
sunxi: A64: use H3 DRAM initialization code for A64 as well
by Jens Kuske
· 8 years ago
0eb6f9f
sunxi: H3: add and rename some DRAM contoller registers
by Jens Kuske
· 8 years ago
83843c9
sunxi: A64: do an RMR switch if started in AArch32 mode
by Andre Przywara
· 8 years ago
ce62e57
ARM: boot0 hook: remove macro, include whole header file
by Andre Przywara
· 8 years ago
a5168a5
armv8: move reset branch into boot hook
by Andre Przywara
· 8 years ago
65d2d4f
sunxi: fix SID read on H3
by Icenowy Zheng
· 8 years ago
31633a5
sunxi: Add support for SID e-fuses on sun9i
by Chen-Yu Tsai
· 8 years ago
7962a8d
sunxi: add initial clock setup for sun9i for SPL
by Philipp Tomsich
· 8 years ago
ea1af9f
sunxi: add gtbus-initialisation for sun9i
by Philipp Tomsich
· 8 years ago
297bb9e
sunxi: DRAM initialisation for sun9i
by Philipp Tomsich
· 8 years ago
9d6c9d9
sunxi: A64: enable USB support
by Amit Singh Tomar
· 8 years ago
57075a4
sunxi: musb: Power off OTG port VBUS when disabled
by Chen-Yu Tsai
· 8 years ago
d5ac6ee
sunxi: Tune H3 DRAM PLL to improve lock time
by Jens Kuske
· 8 years ago
421c98d
sunxi: display: Use PWM to drive backlight where applicable
by Hans de Goede
· 8 years ago
8df375b
sunxi: Add missing macros to configure the NAND controller clk
by Boris Brezillon
· 8 years ago
ef36d9a
sunxi: Use BROM stored boot_media value to determine our boot-source
by Hans de Goede
· 8 years ago
a29710c
net: Add EMAC driver for H3/A83T/A64 SoCs.
by Amit Singh Tomar
· 8 years ago
320e057
sunxi: FEL - Add the ability to recognize and auto-import uEnv-style data
by Bernhard Nortmann
· 8 years ago
19e99fb
sunxi: Support booting from SPI flash
by Siarhei Siamashka
· 8 years ago
9acebe8
sunxi: Add missing boot_media fields in the SPL header
by Olliver Schinagl
· 8 years ago
3424c3f
sunxi: Add base address for GIC
by Chen-Yu Tsai
· 8 years ago
7579a3e
sunxi: Add CPUCFG debug lock and sun7i cpu power controls
by Chen-Yu Tsai
· 8 years ago
20e3d05
sunxi: Group cpu core related controls together
by Chen-Yu Tsai
· 8 years ago
57c2a25
sunxi: Add missing linux/types.h header for cpucfg_sun6i.h
by Chen-Yu Tsai
· 8 years ago
d7d4e5c
sunxi: Add packed attribute to struct sunxi_prcm_reg
by Chen-Yu Tsai
· 8 years ago
0f3b894
sunxi: Make CPUCFG_BASE macro names the same across families
by Chen-Yu Tsai
· 8 years ago
5bc88cc
sunxi: Downclock AHB1 to 100MHz on Allwinner A64
by Siarhei Siamashka
· 8 years ago
cdaa633
arm/arm64: implement a boot header capability
by Andre Przywara
· 8 years ago
b19236f
sunxi: Increase SPL header size to 64 bytes to avoid code corruption
by Siarhei Siamashka
· 8 years ago
d96ebc4
sunxi: Add support for Allwinner A64 SoCs
by Siarhei Siamashka
· 9 years ago
93bac95
sunxi: clk: Fix USB PHY clock macros for A83T
by Chen-Yu Tsai
· 9 years ago
fc8991c
sunxi: Fix gmac not working due to cpu_eth_init no longer being called
by Hans de Goede
· 9 years ago
70fe24e
sunxi: Support SID e-fuses on A83T and H3
by Chen-Yu Tsai
· 9 years ago
dc44fd8
sunxi: H3: Add support for the host usb-phys
by Jelle van der Waa
· 9 years ago
f3ad64c
sunxi: Add support for LPDDR3 for A83T
by Vishnu Patekar
· 9 years ago
f5fd8ca
sunxi: Groundwork to support new dram type for A83T
by Vishnu Patekar
· 9 years ago
ed80584
sunxi: Support H3 CCU security switches
by Chen-Yu Tsai
· 9 years ago
5823664
sunxi: Support Secure Memory Touch Arbiter (SMTA) in sun8i H3
by Chen-Yu Tsai
· 9 years ago
9d08268
sunxi: Add support for the I2C controller which is part of the PRCM
by Jelle van der Waa
· 9 years ago
81f50d9
sunxi: Add support for Allwinner A83T DRAM
by vishnupatekar
· 9 years ago
f542948
sunxi: clk: add basic clocks for A83T
by vishnupatekar
· 9 years ago
d5a3357
sunxi: Add support for UART0 in PB pin group on A83T
by vishnupatekar
· 9 years ago
cbc1a91
sunxi: Set AHB1 clock to PLL6/3 on all clock_sun6i.h using SoCs
by Hans de Goede
· 9 years ago
52d0931
sunxi: clock: Set AHB1 clock frequency to 200MHz on Allwinner H3
by Siarhei Siamashka
· 9 years ago
0404d53
sunxi: Add H3 DRAM initialization support
by Jens Kuske
· 9 years ago
1c27b7d
sunxi: Add basic H3 support
by Jens Kuske
· 9 years ago
af654d1
sunxi: retrieve FEL-provided values to environment variables
by Bernhard Nortmann
· 9 years ago
a188438
sunxi: (mksunxiboot) signature to indicate "sunxi" SPL variant
by Bernhard Nortmann
· 9 years ago
e954eb8
sunxi: move SPL-related definitions to platform-specific include
by Bernhard Nortmann
· 9 years ago
9236984
sunxi: Enable non-secure access to RTC on sun6i (A31s)
by Chen-Yu Tsai
· 9 years ago
55ea98d
sun6i: clock: Add support for the mipi pll
by Hans de Goede
· 9 years ago
49043cb
sunxi: clock: Add clock_get_pll3() helper function
by Hans de Goede
· 9 years ago
d8d0799
sunxi: display: Fix composite video out on sun5i
by Hans de Goede
· 9 years ago
0ecb43a
sunxi: display: Add a few extra register and constant defines
by Hans de Goede
· 9 years ago
c9f8947
sunxi: usb-phy: Never power off the usb ports
by Hans de Goede
· 9 years ago
ad00829
sunxi: nand: Add pinmux and clock settings for NAND support
by Karol Gugala
· 9 years ago
95de1e2
usb: musb-new: CONFIG_MUSB prefix replacement with CONFIG_USB_MUSB
by Paul Kocialkowski
· 9 years ago
d42faf3
sunxi: musb: Move musb config and platdata to the sunxi-musb glue
by Hans de Goede
· 9 years ago
48c06c9
sunxi: usb-phy: Add support for reading otg id pin value
by Hans de Goede
· 9 years ago
645c48f
sunxi: Create helper function veryfing valid boot signature on MMC
by Daniel Kochmański
· 9 years ago
e506889
sunxi: Add support for UART0 in PB pin group on A33
by Chen-Yu Tsai
· 9 years ago
da9971d
Revert "sunxi/nand: Add support to the SPL for loading u-boot from internal NAND memory"
by Ian Campbell
· 9 years ago
f76eba3
sunxi/nand: Add support to the SPL for loading u-boot from internal NAND memory
by Daniel Kochmański
· 9 years ago
d0f4200
sunxi: Match sun4i, sun6i, sun9i CCI definitions for NAND and DMA
by Roy Spliet
· 9 years ago
a19e735
sunxi: Add DMA definitions
by Roy Spliet
· 9 years ago
1871a8c
sun9i: Basic sun9i (A80) support
by Hans de Goede
· 10 years ago
83edb2a
sunxi: video: Fix lvds panel support for sun6i+
by Hans de Goede
· 9 years ago
8975cdf
sunxi: Make DRAM_ODT_EN Kconfig setting a bool
by Hans de Goede
· 9 years ago
5cd83b11
sunxi: add support for UART2 on A23/A33
by Laurent Itti
· 9 years ago
6a72e80
sunxi: ohci: Add ohci usb host controller support
by Hans de Goede
· 9 years ago
e13afee
sunxi: usb: Do not call phy_probe from hcd code
by Hans de Goede
· 9 years ago
2aacc42
sunxi: usb: Rename the usbc.? files to usb_phy.?
by Hans de Goede
· 9 years ago
7b79865
sunxi: usb: Rename sunxi_usbc_foo functions to sunxi_usb_phy_bar
by Hans de Goede
· 9 years ago
a781c97
sunxi: usb: Remove sunxi_usbc_get_io_base function
by Hans de Goede
· 9 years ago
421b32b
sunxi: axp: Remove non driver-model support from the axp gpio code
by Hans de Goede
· 9 years ago
aab0964
sunxi: gmac: Move sunxi_gmac_initialize proto out of netdev.h
by Hans de Goede
· 9 years ago
f9b7a04
sunxi: axp: Add driver-model support to the axp_gpio code
by Hans de Goede
· 9 years ago
2fcf033
sunxi: axp: Move axp gpio code to a separate axpi-gpio driver
by Hans de Goede
· 9 years ago
1d624a4
sunxi: axp: Move axp pmic register helpers to a separate file
by Hans de Goede
· 9 years ago
ffc0ae0
sunxi: Add a33 dram init code
by Vishnu Patekar
· 10 years ago
886a7b4
sunxi: Add support for A33 PLL11 (second DRAM pll)
by Hans de Goede
· 9 years ago
5e6bacd
sunxi: s/sun8i/sun8i_a23/
by Hans de Goede
· 9 years ago
44d8ae5
sunxi: Introduce a hidden SUNXI_GEN_SUNxI Kconfig bool
by Hans de Goede
· 9 years ago
6c739c5
sunxi: Complete i2c support for each supported platform
by Paul Kocialkowski
· 9 years ago
dd82242
i2c: mvtwsi: Support for up to 4 different controllers
by Paul Kocialkowski
· 9 years ago
8deacca
sunxi: Complete mmc pin mux for each supported platform, configured with Kconfig
by Paul Kocialkowski
· 10 years ago
487b327
sunxi: GPIO pin mux hardware-feature-specific function index defines
by Paul Kocialkowski
· 10 years ago
Next »