1. ea4e938 arm64: dts: imx8mq-u-boot.dtsi: improve odd blob-ext naming by Patrick Wildt · 2 years, 9 months ago
  2. 49f5565 arm64: dts: imx8mm-u-boot.dtsi: use dash for node names by Patrick Wildt · 2 years, 9 months ago
  3. 553216f arm64: dts: imx8mq-u-boot.dtsi: explicitly add spl filename by Patrick Wildt · 2 years, 9 months ago
  4. 440c7d1 arm64: dts: imx8mq-u-boot.dtsi: alphabetically re-order properties by Patrick Wildt · 2 years, 9 months ago
  5. 1bcda4e imx: imx8mm: imx8mm-kontron-n801x-s: add common board u-boot.dtsi by Heiko Thiery · 2 years, 9 months ago
  6. 02737ac cmd_nandbcb: Support secondary boot address of imx8mn by Michael Trimarchi · 2 years, 10 months ago
  7. 0be742d imx: Enable ACTLR.SMP in SPL for i.MX6/7 by Sven Schwermer · 2 years, 10 months ago
  8. 8ed378f ARM: dts: imx: Synchronize iMX6QDL DHCOM PDK2 DTs with Linux 5.15.12 by Marek Vasut · 2 years, 10 months ago
  9. 2ab0b52 ARM: dts: imx: Add labels to remaining anatop regulators by Marek Vasut · 2 years, 10 months ago
  10. e2a63608 arm: dts: Enable support for USB on XEA (imx28) board by Lukasz Majewski · 2 years, 10 months ago
  11. 1e7212e xea: dts: Update the SPI-NOR flash memory partitions description by Lukasz Majewski · 2 years, 10 months ago
  12. 014315b spl: Provide more space to be used for storing SPL on imx28 OCRAM by Lukasz Majewski · 2 years, 10 months ago
  13. e195550 ARM: dts: imx6ull: Use the correct name for ESAI_TX0 by Fabio Estevam · 2 years, 10 months ago
  14. 12f9b4d mx6: Use imx6_src_get_boot_mode() to check boot device by Harald Seiler · 2 years, 11 months ago
  15. ca27227 ARM: dts: imx6q-dhcom: Use 1G ethernet on the PDK2 board by Christoph Niedermaier · 2 years, 11 months ago
  16. c4c1ed6 imx8mn_var_som: Add support for Variscite VAR-SOM-MX8M-NANO board by Ariel D'Alessandro · 2 years, 11 months ago
  17. 4821074 colibri-imx8x: add on-module gpio expander fxl6408 by Oleksandr Suvorov · 2 years, 11 months ago
  18. 556523b arm: imx8m: imx8mm-cl-iot-gate: detect extension board by Ying-Chun Liu (PaulLiu) · 3 years ago
  19. 27ea1c5 arm: dts: imx8mm-cl-iot-gate: add Compulab's ied overlays by Ying-Chun Liu (PaulLiu) · 3 years ago
  20. 6293b73 imx8ulp: implement to obtain the SoC current temperature by Alice Guo · 3 years ago
  21. dc77d0f imx8ulp: clock: Handle the DDRLOCKED when setting DDR clock by Ye Li · 3 years ago
  22. 0f9b10a imx8ulp: clock: Support to enable/disable the ADC1 clock by Alice Guo · 3 years ago
  23. 484b306 imx8ulp: Update ethernet mac to get from fuse by Ye Li · 3 years ago
  24. 3b32010 imx8ulp: clock: Support to reset DCNano and MIPI DSI by Ye Li · 3 years ago
  25. 55a7e78 imx8ulp: clock: Reset DDR controller before clock enable by Ye Li · 3 years ago
  26. 9c7fbeb imx8ulp: Workaround LPOSC_TRIM fuse load issue by Ye Li · 3 years ago
  27. 112b4ca imx8ulp: Remove freescale name from CPU revision by Ye Li · 3 years ago
  28. bd8b673 imx8ulp: Fix DCNANO QoS setting by Ye Li · 3 years ago
  29. 16062f9 imx8ulp: Set DCNANO read QoS on NIC_LPAV to highest by Ye Li · 3 years ago
  30. 9dde390 imx8ulp_evk: Control LPI2C0 PCA6416 and TPM0 for display by Ye Li · 3 years ago
  31. 608ed20 imx8ulp: rdc: allow A35 access flexspi0 mem by Ye Li · 3 years ago
  32. 829e06b imx8ulp: clock: Add MIPI DSI clock and DCNano clock by Ye Li · 3 years ago
  33. 5ff18da imx8ulp: clock: Support LPAV clocks in cgc and pcc by Ye Li · 3 years ago
  34. 99de168 imx8ulp: assign PXP/HIFI4/EPDC to APD domain by Peng Fan · 3 years ago
  35. d563d29 arm: imx8ulp: Allocate LPAV resources to AP domain by Ye Li · 3 years ago
  36. 961ac78 imx8ulp: soc: Check the DBD_EN fuse before setting RDC by Ye Li · 3 years ago
  37. 89ca5a7 ARM: imx8m: support env in fat and ext4 by Ricardo Salveti · 3 years ago
  38. af60263 imx: nandbcb: Fix printf format in write_fcb by Pali Rohár · 3 years ago
  39. 91f27f3 mxs: power: Change sequence of enabling DCDC switches by Lukasz Majewski · 3 years ago
  40. cd0ecb3 imx8mm-venice-gw7902: fix M2_RST# gpio pinmux by Tim Harvey · 3 years, 1 month ago
  41. 8b71576 mx7ulp_com: add support for SPL by Ricardo Salveti · 3 years, 1 month ago
  42. 498eedc mx7ulp: select soc features by Oleksandr Suvorov · 3 years, 1 month ago
  43. 6ff55bc arm: imx: imx8mq: add support to get values for more clocks by Heiko Thiery · 3 years, 1 month ago
  44. 3aaabfe Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-sunxi by Tom Rini · 2 years, 9 months ago
  45. ce2b6c4 ARM: dts: suniv: Add device tree files and bindings for F1C100s by Icenowy Zheng · 2 years, 9 months ago
  46. cfe673c mach-sunxi: Add support for SUNIV architecture by Icenowy Zheng · 2 years, 9 months ago
  47. 645ee3c sunxi: Add F1C100s DRAM initial support by Icenowy Zheng · 2 years, 9 months ago
  48. 5d35f0f ARM: sunxi: Add clock and uart to sunxi headers by Icenowy Zheng · 2 years, 9 months ago
  49. 88998f7 arm: arm926ej-s: Add sunxi code by Icenowy Zheng · 2 years, 9 months ago
  50. 0d4377f mach-sunxi: Move timer code to mach folder by Jesse Taube · 2 years, 9 months ago
  51. 508f75a arm: arm926ej-s: start.S: port save_boot_params support from armv7 code by Icenowy Zheng · 2 years, 9 months ago
  52. b8cd7f4 armv8: remove no longer needed lowlevel_init.S by Andre Przywara · 2 years, 9 months ago
  53. 534b82a sunxi: move early "SRAM setup" into separate file by Andre Przywara · 2 years, 9 months ago
  54. 2564fce sunxi: move Cortex SMPEN setting into start.S by Andre Przywara · 2 years, 9 months ago
  55. 5bc4cd0 sunxi: move non-essential code out of s_init() by Andre Przywara · 2 years, 9 months ago
  56. 68f0896 armv8: start.S: remove CONFIG_SYS_RESET_SCTRL code by Andre Przywara · 2 years, 9 months ago
  57. 22eb7ba armv8: spl: Fix build with LINUX_KERNEL_IMAGE_HEADER by Alper Nebi Yasak · 2 years, 9 months ago
  58. 681adaa arm: dts: ls1028a-qds: declare in-band autoneg for Ethernet ports by Vladimir Oltean · 2 years, 10 months ago
  59. bee9fd2 arm: dts: ls1028a-rdb: sync device tree with Linux by Vladimir Oltean · 2 years, 10 months ago
  60. 50c49ef arm: dts: ls1028a-rdb: enable PCIe controllers from U-Boot dtsi by Vladimir Oltean · 2 years, 10 months ago
  61. f33fad6 arm: dts: ls1028a-rdb: disable I2C buses 1 through 7 by Vladimir Oltean · 2 years, 10 months ago
  62. 5b0f8ee arm: dts: ls1028a-rdb: disable DSPI nodes by Vladimir Oltean · 2 years, 10 months ago
  63. 4a5362f arm: dts: ls1028a-rdb: sync Ethernet device tree nodes with Linux by Vladimir Oltean · 2 years, 10 months ago
  64. 5009b11 arm: dts: ls1028a-rdb: sort nodes alphabetically by Vladimir Oltean · 2 years, 10 months ago
  65. aa05862 arm: dts: lx2160a-rdb: use Linux compatible string for RTC by Vladimir Oltean · 2 years, 10 months ago
  66. 41496cc arm: dts: ls1028a-rdb: use Linux compatible string for RTC by Vladimir Oltean · 2 years, 10 months ago
  67. 801f4b0 arm: dts: ls1028a-qds: use Linux compatible string for RTC by Vladimir Oltean · 2 years, 10 months ago
  68. 246b7e6 arm: dts: lx2160a-qds: use Linux compatible string for RTC by Vladimir Oltean · 2 years, 10 months ago
  69. 5d0b044 arm: dts: ls1088a-rdb: use Linux compatible string for RTC by Vladimir Oltean · 2 years, 10 months ago
  70. 489c428 arm: dts: ls1088a-qds: use Linux compatible string for RTC by Vladimir Oltean · 2 years, 10 months ago
  71. 2e14b1f arm/expu1/seli8: adapt dts NOR partition table to the latest used by Aleksandar Gerasimovski · 3 years ago
  72. 7539bb3 arm: ls1021a: limit debug eth phy speed to 100Mbps by Aleksandar Gerasimovski · 3 years ago
  73. a1d2fd3 board: traverse: add initial Ten64 support by Mathew McBride · 2 years, 9 months ago
  74. 71dcfa9 arm: kirkwood: Pogoplug-V4 : Add Kconfig files by Tony Dinh · 2 years, 9 months ago
  75. cd19787 arm: kirkwood: Pogoplug-V4 : Add DTS files by Tony Dinh · 2 years, 9 months ago
  76. e97943b sunxi: Fix H616 DRAM read calibration for dual rank by Jernej Skrabec · 2 years, 9 months ago
  77. 18a5927 sunxi: fix H616 DRAM ODT support by Jernej Skrabec · 2 years, 9 months ago
  78. 52bcc4f sunxi: Add option to prevent booting on power plug-in by Chris Morgan · 2 years, 9 months ago
  79. 8695b51 sunxi: gpio: Fix up pointer arithmetic by Andre Przywara · 2 years, 9 months ago
  80. efdd656 sunxi: gpio: Add per-bank drive and pull setters by Samuel Holland · 3 years ago
  81. ac5397a sunxi: gpio: Return void from setter functions by Samuel Holland · 3 years ago
  82. afe5163 ARM: dts: k3-am642-sk: Disable cpsw_port1 in SPL by Vignesh Raghavendra · 2 years, 9 months ago
  83. 22c0815 configs: stm32mp15: Enable OF_BOARD flag by Patrice Chotard · 2 years, 9 months ago
  84. 94e561f stm32prog: add partition name in treat_partition_list error messages by Patrick Delaunay · 2 years, 9 months ago
  85. 332facc ARM: dts: stm32: Synchronize DHCOM DTs with Linux 5.15.12 by Marek Vasut · 2 years, 10 months ago
  86. 6b8bd70 ARM: dts: stm32: Synchronize DHCOR DTs with Linux 5.15.12 by Marek Vasut · 2 years, 10 months ago
  87. bd485f9 arm: dts: stm32mp15: alignment with v5.16 by Patrick Delaunay · 2 years, 10 months ago
  88. 5c68904 stm32mp: correct the dependency for bootcount configs by Patrick Delaunay · 2 years, 11 months ago
  89. d5e8119 stm32mp: remove the bootcount activation by Patrick Delaunay · 2 years, 11 months ago
  90. 3919aa1 ARM: dts: stm32: Add DFU support for DHCOR recovery by Marek Vasut · 2 years, 11 months ago
  91. 757c838 arm: stm32mp: Fix USB boot device report by Marek Vasut · 2 years, 11 months ago
  92. 16f4d36 arm: dts: rz-g2-beacon-u-boot: Enable pinmux for QSPI by Adam Ford · 2 years, 9 months ago
  93. 3425dec Convert CONFIG_AT91_EFLASH to Kconfig by Patrick Delaunay · 2 years, 10 months ago
  94. d3877fb Convert CONFIG_BOOTP_SERVERIP to Kconfig by Simon Glass · 2 years, 10 months ago
  95. d6b318d Convert CONFIG_TIMESTAMP to Kconfig by Simon Glass · 2 years, 10 months ago
  96. 2d7a463 Merge https://source.denx.de/u-boot/custodians/u-boot-marvell by Tom Rini · 2 years, 9 months ago
  97. 280db76 Merge tag 'doc-2022-04-rc1' of https://source.denx.de/u-boot/custodians/u-boot-efi by Tom Rini · 2 years, 9 months ago
  98. 0d582a4 arm: mvebu: spl: Fix 100 column exceeds by Marek Behún · 2 years, 9 months ago
  99. 37241ce arm: mvebu: spl: Use IS_ENABLED() instead of #ifdef where possible by Marek Behún · 2 years, 9 months ago
  100. c894566 arm: mvebu: spl: Use preferred types u8/u16/u32 instead of uintN_t by Marek Behún · 2 years, 9 months ago