1. e4f65d0 eeprom: Zap CONFIG_SYS_I2C_MULTI_EEPROMS by Marek Vasut · 9 years ago
  2. ef0f2f5 Move defaults from config_cmd_default.h to Kconfig by Joe Hershberger · 9 years ago
  3. 92ac520 net: Remove all references to CONFIG_ETHADDR and friends by Joe Hershberger · 10 years ago
  4. 345b77b ppc4xx: Remove 4xx NAND booting support by Stefan Roese · 11 years ago
  5. 1a0afe1 powerpc: ppc4xx: remove redundant CONFIG_4xx definition by Masahiro Yamada · 11 years ago
  6. c2120fb Merge branch 'master' of git://git.denx.de/u-boot-i2c by Tom Rini · 11 years ago
  7. 1a45966 Add GPL-2.0+ SPDX-License-Identifier to source files by Wolfgang Denk · 11 years ago
  8. 880540d i2c, ppc4xx_i2c: switch to new multibus/multiadapter support by Dirk Eibach · 12 years ago
  9. 842033e pci: introduce CONFIG_PCI_INDIRECT_BRIDGE option by Gabor Juhos · 12 years ago
  10. c11ace6 boards: remove the no longer used CONFIG_EHCI_DCACHE by Jeroen Hofstee · 12 years ago
  11. 25efd99 nand_spl: store ecc data on the stack by Scott Wood · 13 years ago
  12. 25ddd1f Replace CONFIG_SYS_GBL_DATA_SIZE by auto-generated value by Wolfgang Denk · 14 years ago
  13. 553f098 Rename CONFIG_SYS_INIT_RAM_END into CONFIG_SYS_INIT_RAM_SIZE by Wolfgang Denk · 14 years ago
  14. 2ae1824 Makefile: move all Power Architecture boards into boards.cfg by Wolfgang Denk · 14 years ago
  15. 14d0a02 Rename TEXT_BASE into CONFIG_SYS_TEXT_BASE by Wolfgang Denk · 14 years ago
  16. 2e6e177 Merge branch 'next' of /home/wd/git/u-boot/next by Wolfgang Denk · 14 years ago
  17. 550650d ppc4xx: Use common NS16550 driver for PPC4xx UART by Stefan Roese · 14 years ago
  18. 800eb09 POST cleanup. by Michael Zaidman · 14 years ago
  19. 559e2c8 Adds EHCI definitions to sequoia board configuration file. by Chris Zhang · 15 years ago
  20. a760b02 ppc4xx: Consolidate pci_pre_init() function by Stefan Roese · 15 years ago
  21. cfc2587 ppc4xx: Sequoia: Add chip_config command by Stefan Roese · 15 years ago
  22. d873133 ppc4xx: Add Sequoia RAM-booting target by Stefan Roese · 16 years ago
  23. 9a92917 ppc4xx: Disable POST memory test on NAND-booting Sequoia by Stefan Roese · 16 years ago
  24. 6c86963 NAND: rename NAND_MAX_CHIPS to CONFIG_SYS_NAND_MAX_CHIPS by Wolfgang Grandegger · 16 years ago
  25. 6d0f6bc rename CFG_ macros to CONFIG_SYS by Jean-Christophe PLAGNIOL-VILLARD · 16 years ago
  26. abbb906 Remove unused CFG_EEPROM_PAGE_WRITE_ENABLE references by Peter Tyser · 16 years ago
  27. 0e8d158 rename CFG_ENV macros to CONFIG_ENV by Jean-Christophe PLAGNIOL-VILLARD · 16 years ago
  28. 5a1aceb rename CFG_ENV_IS_IN_FLASH in CONFIG_ENV_IS_IN_FLASH by Jean-Christophe PLAGNIOL-VILLARD · 16 years ago
  29. 51bfee1 rename CFG_ENV_IS_IN_NAND in CONFIG_ENV_IS_IN_NAND by Jean-Christophe PLAGNIOL-VILLARD · 16 years ago
  30. 3d4a746e2 ppc4xx: Increase image size for NAND boot target by Stefan Roese · 16 years ago
  31. 00b1883 drivers/mtd: Move conditional compilation to Makefile by Jean-Christophe PLAGNIOL-VILLARD · 16 years ago
  32. eab1007 ppc4xx: Sequoia has two UARTs in "4-pin" mode. Configure the GPIOs as per schematic. by Steven A. Falco · 16 years ago
  33. 72675dc ppc4xx: Unify AMCC's board config files (part 3/3) by Stefan Roese · 16 years ago
  34. 53677ef Big white-space cleanup. by Wolfgang Denk · 17 years ago
  35. 14f73ca ppc: Add CFG_MEM_TOP_HIDE option to hide memory area that doesn't get "touched" by Stefan Roese · 17 years ago
  36. fc84a84 ppc4xx: Sequoia: Add device tree (fdt) Linux booting default env variables by Stefan Roese · 17 years ago
  37. d8ab58b Replace "run load; run update" with conditionalized "run load update". by Detlev Zundel · 17 years ago
  38. 32bf3d1 Fix quoting problem (preboot setting) in many board config files. by Wolfgang Denk · 17 years ago
  39. bc77881 ppc4xx: Support for ATI Radeon 9200 card on sequoia by Anatolij Gustschin · 17 years ago
  40. 214398d ppc4xx: Beautify configuration files for Sequoia and Korat boards by Larry Johnson · 17 years ago
  41. 4d332db ppc4xx: Make Sequoia boot vxWorks by Niklaus Giger · 17 years ago
  42. b05e8bf ppc4xx: Use CFG_4xx_GPIO_TABLE to configure Sequoia board by Lawrence R. Johnson · 17 years ago
  43. 42d55ea ppc4xx: Move virtual address of POST cache test to bigger address by Stefan Roese · 17 years ago
  44. 328a340 ppc4xx: fdt: Cleanup setup of cpu node setup by Stefan Roese · 17 years ago
  45. 052440b ppc4xx: Add CONFIG_BOOTP_SUBNETMASK to Sequoia board config by Markus Klotzbücher · 17 years ago
  46. 1362888 ppc4xx: Bring 4xx fdt support up-to-date by Stefan Roese · 17 years ago
  47. 2d14684 ppc4xx: Use generic usb-ohci driver for sequoia board by Matthias Fuchs · 17 years ago
  48. d25dfe0 ppc4xx: Remove cache definition from 4xx board config files by Stefan Roese · 17 years ago
  49. 5a5958b ppc4xx: Fix incorrect 33/66MHz PCI clock log-message on Sequoia & Yosemite by Stefan Roese · 17 years ago
  50. 81b73de ppc4xx: (Re-)Enable CONFIG_PCI_PNP on AMCC 440EPx Sequoia by Gary Jennejohn · 17 years ago
  51. 9de469b ppc4xx: Only enable POST FPU test on Sequoia and not Rainier by Stefan Roese · 17 years ago
  52. 6bf6f11 Merge branch 'testing' into working by Andy Fleming · 17 years ago
  53. 079a136 include/configs/[p-z]* + misc: Cleanup BOOTP and lingering CFG_CMD_*. by Jon Loeliger · 17 years ago
  54. 46da1e9 include/configs: Use new CONFIG_CMD_* in various s* named board config files. by Jon Loeliger · 17 years ago
  55. b448962 Merged POST framework with the current TOT. by Sergei Poselenov · 17 years ago
  56. e4feb76 Merge with git://www.denx.de/git/u-boot.git by Stefan Roese · 17 years ago
  57. 466fff1 ppc4xx: Add pci_pre_init() for 405 boards by Stefan Roese · 17 years ago
  58. 1636d1c Coding stylke cleanup; rebuild CHANGELOG by Wolfgang Denk · 17 years ago
  59. a11e069 Extend POST support for PPC440 by Igor Lisitsin · 18 years ago
  60. efa35cf ppc4xx: Clean up 440 exceptions handling by Grzegorz Bernacki · 17 years ago
  61. f3679aa Merge with /home/stefan/git/u-boot/bamboo-nand by Stefan Roese · 18 years ago
  62. 9d90960 ppc4xx: Update Sequoia NAND booting support with ECC by Stefan Roese · 18 years ago
  63. 193b4a3 [PATCH] ppc4xx: Fix CONFIG_SYS_CLK_FREQ definition in Sequoia config file by Jeffrey Mann · 18 years ago
  64. e3b8c78 ppc4xx: Detect if the sysclk on Sequoia is 33 or 33.333 MHz by Jeffrey Mann · 18 years ago
  65. 430f1b0 Merge some AMCC make targets to keep the top-level Makefile smaller by Stefan Roese · 18 years ago
  66. 2db6336 [PATCH] Small Sequoia cleanup by Stefan Roese · 18 years ago
  67. 4be23a1 [PATCH] Update Sequoia EBC configuration (NOR FLASH) by Stefan Roese · 18 years ago
  68. 23744d6 [PATCH] Remove PCI-PNP configuration from Sequoia/Rainier config file by Stefan Roese · 18 years ago
  69. e802594 [PATCH] Update Sequoia (440EPx) config file by Stefan Roese · 18 years ago
  70. 0238898 [PATCH] Add DDR2 optimization code for Sequoia (440EPx) board by Stefan Roese · 18 years ago
  71. d1a7254 [PATCH] Select NAND embedded environment from board configuration by Stefan Roese · 18 years ago
  72. 4ef6251 [PATCH] Update AMCC Sequoia config file to support 64MByte NOR FLASH by Stefan Roese · 18 years ago
  73. 43a2b0e Add board/cpu specific NAND chip select function to 440 NDFC by Stefan Roese · 18 years ago
  74. 854bc8d Add support for AMCC Rainier PPX440GRx eval board by Stefan Roese · 18 years ago
  75. d12ae80 Add NAND environment support for PPC440EPx Sequoia NAND boot config by Stefan Roese · 18 years ago
  76. 887e2ec Add support for AMCC Sequoia PPC440EPx eval board by Stefan Roese · 18 years ago