- 8fe9bf6 Merged MPC8349ADS and MPC8349EMDS ports into MPC8349EMDS port: by Kumar Gala · 19 years ago
- a367d42 Update for NC650 board. Add NC650 based CP850 configuration. by dzu@denx.de · 19 years ago
- cf48eb9 Some code cleanup by Wolfgang Denk · 19 years ago
- 807522f Merge with /home/hs/U-Boot/u-boot-dev by Wolfgang Denk · 19 years ago
- b81a463 Fix Quad UART mapping on MCC200 board due to new HW revision by Wolfgang Denk · 19 years ago
- b28a31c Merge with /home/m8/git/u-boot by Wolfgang Denk · 19 years ago
- ad88297 * Fix dbau1x00 Board by Heiko Schocher · 19 years ago
- 6db3970 Fix JFFS2 support for legacy NAND driver. by Marian Balakowicz · 19 years ago
- 9bc97a3 Fix Lite500B support: Merge with /home/raj/git/u-boot.l5200b_pci by Wolfgang Denk · 19 years ago
- 71b405d Merge with /home/sr/git/u-boot/cfi-flash by Wolfgang Denk · 19 years ago
- 197b049 Merge with /home/sr/git/u-boot/4xx-sdram by Wolfgang Denk · 19 years ago
- 2662b40 * Changes/fixes for drivers/cfi_flash.c: by Stefan Roese · 19 years ago
- 62534be Updates to common PPC4xx onboard (DDR)SDRAM init code (405 and 440) by Stefan Roese · 19 years ago
- 9e7b5ce delta board: one more DA9030 fix. by Markus Klotzbuecher · 19 years ago
- eeaab72 Change delta board memory map to start at 0x80000000. by Markus Klotzbuecher · 19 years ago
- 89f2dfa delta board: minor update to DA9030 code. by Markus Klotzbuecher · 19 years ago
- b66a938 Set SDelay register in the DDR controller for the MPC5200B chip. by Rafal Jaworowski · 19 years ago
- c855ef6 delta board: fix DA9030 reset procedure. by Markus Klotzbuecher · 19 years ago
- 2770bcb Merge with http://www.denx.de/git/u-boot.git by Markus Klotzbuecher · 19 years ago
- 40b0baf Added config options CFG_MONAHANS_RUN_MODE_OSC_RATIO and by Markus Klotzbuecher · 19 years ago
- ba70d6a delta board: DA9030 initialization and i2c support. Some minor changes to by Markus Klotzbuecher · 19 years ago
- 05d8dce Enable Quad UART om MCC200 board. by Wolfgang Denk · 19 years ago
- 5725f94 Cleanup MCC200 board configuration; omit non-existent stuff. by Wolfgang Denk · 19 years ago
- 552fc62 Cleanup of the monahans cpu and delta board port. by Markus Klotzbuecher · 19 years ago
- e443c94 Support for redundant environment in NAND Flash. by Markus Klotzbuecher · 19 years ago
- 0a112d8 Merge with port of MPC8349EMDS board by Wolfgang Denk · 19 years ago
- 09e4b0c Add support for Lite5200B board. by Wolfgang Denk · 19 years ago
- dc9e499 Support for DDR with 32-data path. Addotional notes on injecting by Rafal Jaworowski · 19 years ago
- d326f4a Add command for handling DDR ECC registers on MPC8349EE MDS board. by Marian Balakowicz · 19 years ago
- 991425f Add initial support for MPC8349E MDS board. by Marian Balakowicz · 19 years ago
- 84c960c Add support for EmbeddedPlanet EP88x boards Patch by Yuli Barcohen, 13 Jul 2005 by Wolfgang Denk · 19 years ago
- 47705af Merge with git://git.kernel.org/pub/scm/boot/u-boot/u-boot.git#mpc8349ads by Wolfgang Denk · 19 years ago
- 795bee8 Merge with git://git.kernel.org/pub/scm/boot/u-boot/u-boot.git#mpc83xx by Wolfgang Denk · 19 years ago
- a3f0169 Merge with git://git.kernel.org/pub/scm/boot/u-boot/u-boot.git#ft_infr by Wolfgang Denk · 19 years ago
- 0a3471f Add netconsole and some more commands to RPXlite_DW board by Wolfgang Denk · 19 years ago
- 953c5b6 Adjust "echo" as a default command Patch by Sam Song, 19 Jun 2005 by Wolfgang Denk · 19 years ago
- 8e7b703 Coding Style cleanup by Wolfgang Denk · 19 years ago
- 6cb142f Add missing Blackfin files. by Wolfgang Denk · 19 years ago
- 8ff0208 Switch MPC86xADS and MPC885ADS boards to use cpuclk environment by Wolfgang Denk · 19 years ago
- f47b661 RPXlite configuration fixes by Wolfgang Denk · 19 years ago
- aba9f1a Memory configuration changes for ZPC.1900 board by Wolfgang Denk · 19 years ago
- 5797b82 Add support for Adder boards with 16MB SDRAM; by Wolfgang Denk · 19 years ago
- 8371a2c Enable simple (non-redundant) NAND environment on delta board. by Markus Klotzbücher · 19 years ago
- 951a954 Merge with /home/wd/git/u-boot/master Code cleanup. by Wolfgang Denk · 19 years ago
- ac7d97d Turned on SDRAM scrubbing. by Markus Klotzbücher · 19 years ago
- 43638c6 Cleanup of NAND support of delta board using the Monahans Data Flash Controller. by Markus Klotzbücher · 19 years ago
- f9e0291 NAND finally working. Two bugs fixed: by Markus Klotzbücher · 19 years ago
- bfc8125 Minor code cleanup by Wolfgang Denk · 19 years ago
- 4e3ccd2 Merge the new NAND code (testing-NAND brach); see doc/README.nand by Wolfgang Denk · 19 years ago
- addb2e1 Re-factoring the legacy NAND code (legacy NAND now only in board-specific by Bartlomiej Sieka · 19 years ago
- bf7cac0 Lots of new stuff: by Markus Klotzbücher · 19 years ago
- 00c35bd Added GPIO initialization of DF signal. Still not working. by Markus Klotzbücher · 19 years ago
- 82f2e33 Update mcc200 config: Disable PCI and DoC, use 133 MHz IPB clock, by Wolfgang Denk · 19 years ago
- 6949328 First steps implementing NAND support. Not working, fails to read ID. by Markus Klotzbücher · 19 years ago
- f6c0068 Merge with Stefan Roese's branch with CFI driver fixes by Wolfgang Denk · 19 years ago
- 36d2c53 Merge with /home/wd/git/u-boot/master by Wolfgang Denk · 19 years ago
- 58ad497 Convert mcc200 to use common CFI flash driver Patch by Stefan Roese, 28 Feb 2006 by Stefan Roese · 19 years ago
- 0377dca Merge /home/tur/nand/u-boot/ by Markus Klotzbücher · 19 years ago
- 7d4d1ce Merge branch 'master' of http://www.denx.de/git/u-boot by Markus Klotzbücher · 19 years ago
- 038ccac Merge with /home/wd/git/u-boot/testing-NAND/ to add new NAND handling. by Bartlomiej Sieka · 19 years ago
- 599f522 SDRAM now working. by Markus Klotzbücher · 19 years ago
- ff3c2a9 SDRAM now working for delta board, but there are still aliasing problems, by Markus Klotzbücher · 19 years ago
- 6624b68 Rename SMMACO4 board into smmaco4 for consistency with Linux. by Wolfgang Denk · 19 years ago
- 5f0be01 Disable CMD_BSP for SMMACO4 board. by Wolfgang Denk · 19 years ago
- 9cdc838 Merge with /home/hs/PanDacom/u-boot-dev by Wolfgang Denk · 19 years ago
- 86ea5f9 Initial port to MCC200 board (work in progress) by Wolfgang Denk · 19 years ago
- 654c2d2 Merge with /home/sr/git/u-boot by Wolfgang Denk · 19 years ago
- 075866d [Patch] Add basic support for the SMMACO4 Board from PanDaCom. by Heiko Schocher · 19 years ago
- 4f7a0e3 New board directory and config for the benq delta board (copied from by Markus Klotzbücher · 19 years ago
- 8fb1857 Merged and added more pxa-regs.h stuff, especially the GPIO Control by Markus Klotzbücher · 19 years ago
- 57dc57f Merged sufficient changes to pxa-regs.h in order to make u-boot compile. by Markus Klotzbücher · 19 years ago
- 2688e2f Enable address translation on MPC83xx Patch by Kumar Gala, 10 Feb 2006 by Kumar Gala · 19 years ago
- 6ece03f Config updated for compiling the SMC911111 network driver by Markus Klotzbücher · 19 years ago
- b3c36e6 basic u-boot is working, boots into the command shell. by Markus Klotzbücher · 19 years ago
- 79830d5 Convert CPCI750 to use common CFI flash driver by Stefan Roese · 19 years ago
- af646e8 Forgot to add files to zylonite branch. by Markus Klotzbücher · 19 years ago
- 48a05a5 Various changes to esd HH405 board specific files by Stefan Roese · 19 years ago
- 84e106c Update default environment for INKA4x00 board. by Wolfgang Denk · 19 years ago
- a7b9fb9 Add VGA support (CT69000) to CPCI750 board. by Stefan Roese · 19 years ago
- 2076d0a PMC405 and CPCI405: Moved configuration of pci resources into config file. by Stefan Roese · 19 years ago
- c4b465f Fix 28F256J3A support on PM520 board by Wolfgang Denk · 19 years ago
- 86902b8 Added PCI support for MPC8349ADS board Patch by Kumar Gala 11 Jan 2006 by Kumar Gala · 19 years ago
- e4f880e Added CONFIG_ options for bd_t and env in flat dev tree by Kumar Gala · 19 years ago
- 9260a56 Make System IO Config Registers board configurable on MPC83xx by Kumar Gala · 19 years ago
- c7428d4 Add support for 28F256J3A flah (=> 64 MB) on PM520 board by Wolfgang Denk · 19 years ago
- 3a7b142 Change port configuration for O2DNT (CODEC1 on PSC1) by Marian Balakowicz · 19 years ago
- f013dac Code cleanup, especially MIPS for GCC 4.x by Wolfgang Denk · 19 years ago
- 4a86d77 Merge with /home/sr/git/u-boot by Wolfgang Denk · 19 years ago
- b6f8435 Adjust TQM834x PHY addresses for latest hardware revision. by Wolfgang Denk · 19 years ago
- d00de23 Increase malloc arena on TQM5200 board to 256 kB. by Wolfgang Denk · 19 years ago
- d96f41e Add support for TQM8541/8555 boards, TQM85xx support reworked: by Stefan Roese · 19 years ago
- 6e7fb6e Add support for AMCC 440SP, add support for AMCC Luan 440SP eval board. by Stefan Roese · 19 years ago
- 0a69b26 Increase IPB and PCI clocks for O2DNT board. by Marian Balakowicz · 19 years ago
- 3d9569b Changed PPC44x startup message (cpu info, speed...) to common style: by Stefan Roese · 19 years ago
- 5568e61 Add support for Prodrive P3P440 board: by Stefan Roese · 19 years ago
- fe126d8 Change all '$(...)' variable references into '${...}' by Wolfgang Denk · 19 years ago
- c7911c7 Merge with /server/home/stefan/git/u-boot/bamboo-sdram by Stefan Roese · 19 years ago
- fd49bf0 Fix Bamboo DDR SDRAM initialization (problem with onboard SDRAM) by Stefan Roese · 19 years ago
- feaedfc New PPC 405EP board added: CMS700 by Stefan Roese · 19 years ago
- ea33920 Updated PCI mapping for esd CPCI2DP board. by Stefan Roese · 19 years ago