1. b20c38a arm: mvebu: Add support for the Armada XP theadorable board by Stefan Roese · 9 years ago
  2. 913d1be video: Add support for Armada XP LCD controller by Stefan Roese · 9 years ago
  3. aefb8f4 mvebu: Support Synology DS414 by Phil Sutter · 9 years ago
  4. 6202953 mvebu: Add rudimental MV78230 support by Phil Sutter · 9 years ago
  5. 4290252 mvebu: Introduce kconfig symbols for SoC variants by Phil Sutter · 9 years ago
  6. beadff1 mvebu: axp: refactor board_sat_r_get() and caller by Phil Sutter · 9 years ago
  7. 9a04527 drivers/pci/pci_mvebu: Fix for boards with X4 lanes by Phil Sutter · 9 years ago
  8. f4db6c9 arm: mvebu: Add runtime detection of UART (xmodem) boot-mode by Stefan Roese · 9 years ago
  9. a5f8887 arm: mvebu: Add runtime boot-device detection by Stefan Roese · 9 years ago
  10. a9fc5a2 arm: mvebu: Make local structs static const by Stefan Roese · 9 years ago
  11. d35831f arm: mvebu: Move SAR register defines into header by Stefan Roese · 9 years ago
  12. 81e33f4 arm: mvebu: Move SoC selection (A38X vs AXP) into Kconfig by Stefan Roese · 9 years ago
  13. b322c83 arm: mvebu: Consolidate board Kconfig options into one file by Stefan Roese · 9 years ago
  14. d718bf2 arm: mvebu: Print CPU and SDRAM frequency upon startup by Stefan Roese · 9 years ago
  15. e25d5a9 arm: mvebu: Make serdes setup on Armada XP less noisy by Stefan Roese · 9 years ago
  16. 84877c6 arm: mvebu: Don't include "netdev.h" in cpu.c by Stefan Roese · 9 years ago
  17. bf0db8b arm: mvebu: Add support for MV78260 by Stefan Roese · 9 years ago
  18. 00a457b arm: mvebu: Don't use 0 as board ID as its used for the custom boards by Stefan Roese · 9 years ago
  19. ab8a4c6 arm: mvebu: Simplify code in setup_usb_phys() a bit by Stefan Roese · 9 years ago
  20. c86d53f arm: mvebu: Don't disable cache at startup on Armada XP at all by Stefan Roese · 9 years ago
  21. f4e6ec7 arm: mvebu: Don't call arch_cpu_init() from SPL at all by Stefan Roese · 9 years ago
  22. f0e8173 arm: mvebu: Add v7_outer_cache_disable function for AXP & A38x by Stefan Roese · 9 years ago
  23. 3e5ce7c arm: mvebu: Enable L2 cache on Armada XP by Stefan Roese · 9 years ago
  24. 0299c90 arm: mvebu: Add SolidRun ClearFog Armada 38x initial support by Stefan Roese · 9 years ago
  25. 8a02ec1 arm: mvebu: Move some defines to common include file by Stefan Roese · 9 years ago
  26. e3b9c98 net: mvneta: Convert to driver model by Stefan Roese · 9 years ago
  27. 09a54c0 arm: mvebu: Add SPI driver model support by Stefan Roese · 9 years ago
  28. 6451223 arm: mvebu: Add DM and OF_CONTROL support to SPL by Stefan Roese · 9 years ago
  29. 2fbc18f arm: mvebu/kirkwood: Use common timer functions by Stefan Roese · 9 years ago
  30. 9eb14cc arm: mvebu: Configure ARP timeout and retry count by Stefan Roese · 9 years ago
  31. 490753a arm: mvebu: a38x: serdes specification cleanup by Kevin Smith · 9 years ago
  32. 18c202a arm: mvebu: a38x: Add const to some function calls by Kevin Smith · 9 years ago
  33. 544acb0 arm: mvebu: a38x: Remove unsupported topologies by Kevin Smith · 9 years ago
  34. f8fdb81 compat: Remove is_power_of_2() definition by Fabio Estevam · 9 years ago
  35. 9cffb23 arm: mvebu: Add DM (driver model) support by Stefan Roese · 9 years ago
  36. 78de2c0 arm: mvebu: Do not call board_init_r() from board_init_f() by Stefan Roese · 9 years ago
  37. 42cc034 arm: mvebu: Only set CONFIG_SKIP_LOWLEVEL_INIT for SPL by Stefan Roese · 9 years ago
  38. 944c7a3 arm: mvebu: Add option to use UART xmodem protocol via kwboot by Stefan Roese · 9 years ago
  39. c3d8914 arm: mvebu: Move Armada XP/38x Kconfig to mach specific Kconfig file by Stefan Roese · 9 years ago
  40. 787ddb7 arm: mvebu: timer.c: Explicitly move "init_done" var to data section by Stefan Roese · 9 years ago
  41. cefd764 arm: mvebu: Fix internal register config on A38x by Stefan Roese · 9 years ago
  42. 92a3188 bitops: introduce BIT() definition by Heiko Schocher · 9 years ago
  43. 9c28d61 pci: mvebu: Add PCIe driver by Anton Schubert · 9 years ago
  44. 0ceb2da arm: mvebu: Add complete SDRAM ECC scrubbing by Stefan Roese · 9 years ago
  45. a8b57a9 arm: mvebu: dram.c: Rework dram_init() and dram_init_banksize() by Stefan Roese · 9 years ago
  46. 8a83c65 arm: mvebu: Display ECC enabled / disabled upon bootup by Stefan Roese · 9 years ago
  47. dee40d2 arm: mvebu: Enable USB EHCI support on Armada XP by Stefan Roese · 9 years ago
  48. 2a0b7dc arm: mvebu: Enable NAND controller on MVEBU SoC's by Stefan Roese · 9 years ago
  49. 501c098 arm: mvebu: Disable MBUS error propagation by Stefan Roese · 9 years ago
  50. 2b181b5 arm: mvebu: Flush caches and disable MMU only on A38x by Stefan Roese · 9 years ago
  51. 5b72dbf arm: mvebu: Setup the MBUS bridge registers by Stefan Roese · 9 years ago
  52. 8ed20d6 arm: mvebu: Change MBUS base addresses and sizes by Stefan Roese · 9 years ago
  53. 8822fe1 arm: mvebu/armada100: dram.c: Remove CONFIG_SYS_BOARD_DRAM_INIT by Stefan Roese · 9 years ago
  54. 8ed43b9 arm: mvebu: Add SPL SDIO/MMC boot support by Stefan Roese · 9 years ago
  55. ad6ac7a arm: mvebu: a38x: Use correct PEX register access macros by Stefan Roese · 9 years ago
  56. ff9112d arm: mvebu: drivers/ddr: Move Armada XP DDR init code into new directory by Stefan Roese · 10 years ago
  57. edb4702 arm: mvebu: Add Armada 38x SERDES / PHY init code from Marvell bin_hdr by Stefan Roese · 10 years ago
  58. 29b103c arm: mvebu: serdes: Move Armada XP SERDES / PHY init code into new directory by Stefan Roese · 10 years ago
  59. 9f62b44 arm: mvebu: Disable MMU before changing register base address by Stefan Roese · 10 years ago
  60. e3cccf9 arm: mvebu: spl.c: Add call to board_early_init_f() by Stefan Roese · 10 years ago
  61. 2142770 arm: mvebu: Use default reg base address for SPL on A38x by Stefan Roese · 10 years ago
  62. ade741b arm: mvebu: Call timer_init early before PHY and DDR init by Stefan Roese · 9 years ago
  63. e863f7f arm: mvebu: add Armada XP SATA support by Anton Schubert · 9 years ago
  64. fe11ae2 usb: Add EHCI support for Armada 38x (mvebu) by Stefan Roese · 9 years ago
  65. 4d991cb arm: mvebu: Add SATA/SCSI (AHCI) support for Armada A38x by Stefan Roese · 9 years ago
  66. 7f1adcd arm: mvebu: Add SDIO/SDHCI support for Armada A38x by Stefan Roese · 9 years ago
  67. e1b078e arm: mvebu: Update CBAR with SOC regs base by Kevin Smith · 9 years ago
  68. 5730360 arm: mvebu: Disable L2 cache before enabling d-cache by Stefan Roese · 9 years ago
  69. 2083db7 arm: mvebu: Remove "u-boot.kwb" CONFIG_BUILD_TARGET for non-SPL targets by Stefan Roese · 10 years ago
  70. 60b7532 arm: mvebu: Add d-cache invalidate before enabling the d-cache by Stefan Roese · 10 years ago
  71. e89bf8b arm: mvebu: Remove coherency configuration by Stefan Roese · 10 years ago
  72. cae9008 arm: mvebu: Change network init code to allow a more flexible setup by Stefan Roese · 10 years ago
  73. 9c6d3b7 arm: mvebu: Add basic Armada 38x support by Stefan Roese · 10 years ago
  74. 880b15a arm: mvebu: Move CONFIG_SPL_LDSCRIPT to common header by Stefan Roese · 10 years ago
  75. f7c0ef0 arm: mvebu: Only define MV88F78X60 for Armada XP by Stefan Roese · 10 years ago
  76. 8402b69 arm: mvebu: Remove unreferenced define by Stefan Roese · 10 years ago
  77. 250eea7 arm: mvebu: Change header macros from ARMADA_XP to MVEBU by Stefan Roese · 10 years ago
  78. d078765 arm: mvebu: Move mvebu-common into mach-mvebu by Stefan Roese · 10 years ago
  79. 8cb7872 arm: armada-xp: Move SoC headers to mach-mvebu/include/mach by Stefan Roese · 10 years ago
  80. 350b50e arm: armada-xp: Move SoC sources to mach-mvebu by Stefan Roese · 10 years ago