- 9308204 mx53ard: Use gpio_direction_input prior to gpio_get_value by Fabio Estevam · 13 years ago
- a091be7 mx53loco: Use gpio_direction_input prior to gpio_get_value by Fabio Estevam · 13 years ago
- 913b321 mx6q: mx6qsabrelite: Conditionally define macros for environment in serial flash by Eric Nelson · 13 years ago
- ba54b92 mx6q: mx6qsabrelite: Provide default serial flash bus and chip-select by Eric Nelson · 13 years ago
- 373a1d8 mx6q: mx6qsabrelite: Add ECSPI support to the Sabrelite platform by Eric Nelson · 13 years ago
- d5c37c9 mx6q: Add support for ECSPI through mxc_spi driver by Eric Nelson · 13 years ago
- 08c61a5 mxc_spi: move machine specifics into CPU headers by Eric Nelson · 13 years ago
- 4b3a30e mx6q: define GPIO macros for translating between ordinals and port:index by Eric Nelson · 13 years ago
- 63b1e00 MX27: add missing get_tbclk() by Stefano Babic · 13 years ago
- ff250f3 MX28: Fix get_timer() / get_tbclk() issue by Marek Vasut · 13 years ago
- 61698fd mx28: fix SPL code to make USB booting work by Matthias Fuchs · 13 years ago
- 534dbd1 i.MX28: Fix VDDIO and VDDA setup by Marek Vasut · 13 years ago
- 782bb0d MX5/MX6: add missing get_ticks() and get_tbclk() by Stefano Babic · 13 years ago
- 60ebcff MX31: add missing get_tbclk() by Stefano Babic · 13 years ago
- 31bb50f MX35: add missing get_ticks() and get_tbclk() by Stefano Babic · 13 years ago
- ed97abe mx28evk: add SPI support by Matthias Fuchs · 13 years ago
- 598aa2b mx28evk: add USB support by Matthias Fuchs · 13 years ago
- 9588d94 mx28evk: add RTC support by Matthias Fuchs · 13 years ago
- 54e9668 Merge branch 'master' of git://git.denx.de/u-boot-microblaze by Wolfgang Denk · 13 years ago
- 4eb29cf microblaze: Enable TFTP put command by Stephan Linz · 13 years ago
- 0f88326 microblaze: avoid interrupt race conditions by Stephan Linz · 13 years ago
- b9f0b73 microblaze: fix build failure due to undefined reference to `get_ticks' by Stephan Linz · 13 years ago
- cec487a Revert "ARM: I2C: I2C Multi byte address support" by Tom Rini · 13 years ago
- c2459a4 Revert "ARM: AM33XX: Add AM33XX I2C driver support" by Tom Rini · 13 years ago
- 2acca35 Merge branch 'master' of git://git.denx.de/u-boot-mmc by Wolfgang Denk · 13 years ago
- 7dda0c3 Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx by Wolfgang Denk · 13 years ago
- dbe20fc Merge branch 'trini@ti.com' of git://git.denx.de/u-boot-staging by Wolfgang Denk · 13 years ago
- e390e87 Merge branch 'master' of git://git.denx.de/u-boot-x86 by Wolfgang Denk · 13 years ago
- d617c42 mmc: make mmc_send_status() more reliable by Jan Kloetzke · 13 years ago
- 93ad0d1 mmc: fix card busy polling by Jan Kloetzke · 13 years ago
- cf39cf5 Tegra: mmc: Fixed handling of interrupts in timeouts. by Tom Warren · 13 years ago
- a7778f8 omap_hsmmc: Wait for CMDI to be clear by Tom Rini · 13 years ago
- 79f4912 powerpc/8xxx:Add MPH controller support in USB device-tree fixup by ramneek mehresh · 13 years ago
- 5a52977 powerpc/8xxx: Cleanup USB device-tree fixup by ramneek mehresh · 13 years ago
- d1f862f usb_ether: fix typo by Peter Meerwald · 13 years ago
- e506a00 cmd_eeprom: typo by Peter Meerwald · 13 years ago
- 00309c6 doc: complete, typos by Peter Meerwald · 13 years ago
- e9d44b3 Merge branch 'sf' of git://git.denx.de/u-boot-blackfin by Wolfgang Denk · 13 years ago
- 06576b2 Merge branch 'master' of git://git.denx.de/u-boot-blackfin by Wolfgang Denk · 13 years ago
- f61ec45 README: Add description of SPI Flash (SF) command configuration by Eric Nelson · 13 years ago
- c1173bd sf command: allow default bus and chip selects by Eric Nelson · 13 years ago
- 8b463da sf: eeprom_m95xxx: set a sane default timeout by Mike Frysinger · 13 years ago
- a1f77b6 sf: eeprom_m95xxx: fix up style by Mike Frysinger · 13 years ago
- 44f67f7 Blackfin: pata_bfin: fix printf warning by Mike Frysinger · 13 years ago
- 3f54108 Blackfin: bfin_nand: mark local func static by Mike Frysinger · 13 years ago
- 273d11e linkage.h: move from blackfin to common includes by Macpaul Lin · 13 years ago
- 051a5f3 Blackfin: br4: new board port by Dimitar Penev · 13 years ago
- dae2242 Blackfin: add in/out le32 variants by Mike Frysinger · 13 years ago
- 23f1dde post: add blackfin to the post_time_ms list by Mike Frysinger · 13 years ago
- 1a95d89 Blackfin: bf537-stamp: drop board reset workaround by Mike Frysinger · 13 years ago
- 939b150 Blackfin: pr1: new board port by Dimitar Penev · 13 years ago
- 9a3aae2 arm, davinci: Add support for the Calimain board from OMICRON electronics by Christian Riesch · 13 years ago
- 6b873dc Changes to move hawkboard to the new spl infrastructure by Sughosh Ganu · 13 years ago
- d735a99 arm, arm926ejs: Enable icache only if CONFIG_SYS_ICACHE_OFF is not defined by Christian Riesch · 13 years ago
- b67d881 arm, arm926ejs: Add option CONFIG_SYS_EXCEPTION_VECTORS_HIGH by Christian Riesch · 13 years ago
- da104e0 arm, arm926ejs: Flush the data cache before disabling it by Sughosh Ganu · 13 years ago
- 27b6662 arm, arm926ejs: Do cpu critical inits only for boards that require it by Christian Riesch · 13 years ago
- eb93524 arm, davinci: Add lowlevel_init for SoCs other than DM644X by Christian Riesch · 13 years ago
- 9540c7e ARMV7: Fix duplicate use of "b" parameter in ACTIM_CTRLA definition by Peter Barada · 13 years ago
- a8baf8e omap3logic: Add missing GPMC pinmux for LAN92xx access by Peter Barada · 13 years ago
- c8ff6a9 OMAP4460: Reduce MPU clock speed from 920 to 700 by Aneesh V · 13 years ago
- 8f5d468 davinci: add support for printing clock frequency by Hadli, Manjunath · 13 years ago
- 6678ceb davinci: remove macro CONFIG_DISPLAY_CPUINFO by Hadli, Manjunath · 13 years ago
- fd3d28e doc: fix typos by Peter Meerwald · 13 years ago
- a495831 omap3: fix comment typos by Peter Meerwald · 13 years ago
- 66327eb beagle: fix typos by Peter Meerwald · 13 years ago
- c8e5ba8 AM3517: Changed default clock rate for AM3517 by Schuyler Patton · 13 years ago
- 4ab779c mcx: support for HTKW mcx board by Ilya Yanok · 13 years ago
- 1fdabed ARM: omap3: Added Teejet mt_ventoux by Stefano Babic · 13 years ago
- 8c589d6 OMAP3: TAM3517: update ehci interface by Stefano Babic · 13 years ago
- 49be71c OMAP4: ehci-omap: enable ehci-omap for panda boards by Govindraj.R · 13 years ago
- 860004c OMAP4: clock-common: Move the usb dppl configuration to new func by Govindraj.R · 13 years ago
- 95f8791 OMAP3+: Clock: Adding ehci clock enabling by Govindraj.R · 13 years ago
- 43b6239 ehci-omap: Clean up added ehci-omap.c by Govindraj.R · 13 years ago
- 29321c0 ehci-omap: driver for EHCI host on OMAP3 by Ilya Yanok · 13 years ago
- 928c4bd usb: ulpi: Add omap-ulpi-view port support by Govindraj.R · 13 years ago
- 3e6e809 usb: ulpi: Extend the existing ulpi framework. by Govindraj.R · 13 years ago
- dd54d31 ARM: Convert spear3xx and spear6xx boards to boards.cfg by Amit Virdi · 13 years ago
- bf93621 SMDK5250: Add ethernet support by Chander Kashyap · 13 years ago
- 81e3520 EXYNOS: SMDK5250: Add MMC SPL support by Chander Kashyap · 13 years ago
- 0aee53b EXYNOS: Add SMDK5250 board support by Chander Kashyap · 13 years ago
- 37bb6d8 ARM: EXYNOS: Add support for Exynos5 based SoCs by Chander Kashyap · 13 years ago
- 5e46f83 Exynos: Clock.c: Use CONFIG_SYS_CLK_FREQ macro by Chander Kashyap · 13 years ago
- 8aca4d6 TRATS: set gpio of UART correctly by Minkyu Kang · 13 years ago
- 85948a8 TRATS: use the generic watchdog timer by Minkyu Kang · 13 years ago
- 851db35 S5P: support generic watchdog timer by Minkyu Kang · 13 years ago
- 0e94a71 ORIGEN: remove duplicated MACH_TYPE define by Minkyu Kang · 13 years ago
- 89f9549 ARMV7: Exynos4: Add support for TRATS board by HeungJun, Kim · 13 years ago
- 77e490e ARMV7: Exynos4: Add supoort power for Exynos4 by HeungJun, Kim · 13 years ago
- 792be0a ARMV7: Exynos4: Add watchdog.h for Exynos4 by HeungJun, Kim · 13 years ago
- 7336278 Origen: Select SCLKMPLL as FIMD0 parent clock by Chander Kashyap · 13 years ago
- db68bc2 Exynos: Fix ARM Clock frequency calculation by Chander Kashyap · 13 years ago
- e619a0d Exynos: PWM: Add TCMPB3 field in pwm structure by Chander Kashyap · 13 years ago
- 6a23f31 arm/km: checkpatch cleanup by Holger Brunck · 13 years ago
- 9e9c6d7 arm/km: speed up i2c access for keymile boards by Holger Brunck · 13 years ago
- 96f5c4b bugfix: all Marvell specific build fails due to undefined reference to `get_ticks' by Prafulla Wadaskar · 13 years ago
- bfacf46 kirkwood: add support for D-Link DNS-325 by Stefan · 13 years ago
- 6795302 arm, arm-kirkwood: disable l2c before linux boot by Michael Walle · 13 years ago
- 81a6c00 edminiv2: add USB host support by Albert ARIBAUD · 13 years ago
- 805ad7e orion5x: add USB host ehci-marvell support by Albert ARIBAUD · 13 years ago