- 95c3b06 sunxi: dts: arm64: update devicetree files from Linux-v6.6-rc6 by Andre Przywara · 1 year, 2 months ago
- 966caed serial: sh: Add RZ/G2L SCIF support by Paul Barker · 1 year, 2 months ago
- e463222 Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-riscv by Tom Rini · 1 year, 2 months ago
- bc5a504 riscv: Add Zbb support for building U-Boot by Yu Chien Peter Lin · 1 year, 5 months ago
- d311df8 riscv: dts: binman: add condition for opensbi os boot by Randolph · 1 year, 2 months ago
- e09a228 riscv: kconfig: introduce SPL_LOAD_FIT_OPENSBI_OS_BOOT symbol by Randolph · 1 year, 2 months ago
- 04b2123 riscv: andes: Rearrange Andes PLICSW to single-bit-per-hart strategy by Randolph · 1 year, 2 months ago
- 5a348cc riscv: binman: Fix compilation error by Mayuresh Chitale · 1 year, 2 months ago
- 9385c9b riscv: remove dram_init_banksize() by Heinrich Schuchardt · 1 year, 3 months ago
- bc003ca sandbox: watchdog: Avoid an error on startup by Simon Glass · 1 year, 5 months ago
- 60d76e3 test: spl: Add a test for the SPI load method by Sean Anderson · 1 year, 2 months ago
- 65efaac test: spl: Add a test for the NOR load method by Sean Anderson · 1 year, 2 months ago
- 53d8bf8 test: spl: Add a test for the NET load method by Sean Anderson · 1 year, 2 months ago
- b93cc1e test: spl: Add functions to create images by Sean Anderson · 1 year, 2 months ago
- a24be84 sandbox: Support -T in spl by Sean Anderson · 1 year, 2 months ago
- 12b3339 Move i.MX8 container image loading support to common/spl by Sean Anderson · 1 year, 2 months ago
- ab12179 arm: imx: Check header before calling spl_load_imx_container by Sean Anderson · 1 year, 2 months ago
- d401e0b arm: imx: Add function to validate i.MX8 containers by Sean Anderson · 1 year, 2 months ago
- d9416cc arm: imx: Use log_err for errors in read_auth_container by Sean Anderson · 1 year, 2 months ago
- 1439963 arm: imx: Add newlines after error messages by Sean Anderson · 1 year, 2 months ago
- 5c09c25 arm: imx: Fix i.MX8 container load address by Sean Anderson · 1 year, 2 months ago
- e65b5d3 Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-sh by Tom Rini · 1 year, 2 months ago
- 4e65545 board: rzg2l: Add RZ/G2L SMARC EVK board by Paul Barker · 1 year, 2 months ago
- e3e01a6 arm: dts: Import RZ/G2L SMARC EVK device tree by Paul Barker · 1 year, 2 months ago
- eb4f124 arm: rmobile: Support RZ/G2L memory map by Paul Barker · 1 year, 2 months ago
- bf7fa7d arm: rmobile: Add CPU detection for RZ/G2L by Paul Barker · 1 year, 2 months ago
- 96bff89 arm: rmobile: Include <asm/types.h> in header by Paul Barker · 1 year, 2 months ago
- c41df16 Merge tag 'u-boot-imx-20231016' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx by Tom Rini · 1 year, 2 months ago
- 09a946d Merge https://source.denx.de/u-boot/custodians/u-boot-marvell by Tom Rini · 1 year, 2 months ago
- e0caea4 Merge branch '2023-10-16-assorted-cmd-updates' by Tom Rini · 1 year, 2 months ago
- b0eef73 imx8mp-evk: Add USB0 OTG support by Fabio Estevam · 1 year, 2 months ago
- 148447d arm64: dts: imx8mp: Make GPIO3 available early in U-Boot proper on i.MX8MP DHCOM by Marek Vasut · 1 year, 2 months ago
- 38caaff mxs: Kconfig: Remove TARGET_XFI3 symbol by Fabio Estevam · 1 year, 5 months ago
- 4e8c26e smegw01: Convert to watchdog driver model by Fabio Estevam · 1 year, 5 months ago
- 9043ade mx7dsabresd: Convert to watchdog driver model by Fabio Estevam · 1 year, 5 months ago
- 2f9b07d imx7d-sdb-u-boot: Pass SPDX-License tag by Fabio Estevam · 1 year, 5 months ago
- de2f7f5 imx93_evk: defconfig: enable clock driver by Sébastien Szymanski · 1 year, 5 months ago
- 2498568 arm64: dts: imx8mp: Add DT overlay describing i.MX8MP DHCOM SoM rev.100 by Marek Vasut · 1 year, 3 months ago
- 68e0d92 arm64: dts: imx8mp: Drop i.MX8MP DHCOM rev.100 PHY address workaround from PDK3 DT by Marek Vasut · 1 year, 3 months ago
- 9de599e arm64: dts: imx8mp: Update i.MX8MP DHCOM SoM DT to production rev.200 by Marek Vasut · 1 year, 3 months ago
- ad1158c arm64: dts: imx8mp: Switch to DT overlays for i.MX8MP DHCOM SoM by Marek Vasut · 1 year, 3 months ago
- b0296e2 imx: hab: Use size parameter by Marek Vasut · 1 year, 4 months ago
- 3616218 cmd: Convert existing long help messages to the new macro by Tom Rini · 1 year, 3 months ago
- 21e4ba1 gpio: Add RZ/G2L GPIO driver by Paul Barker · 1 year, 2 months ago
- b378c40 pinctrl: renesas: Add RZ/G2L PFC driver by Paul Barker · 1 year, 2 months ago
- 959fc0b arm: rmobile: Restrict PINCTRL_PFC selection to R-Car gen3/gen4 by Paul Barker · 1 year, 2 months ago
- 1918ff5 clk: renesas: Add RZ/G2L & RZ/G2LC CPG driver by Paul Barker · 1 year, 2 months ago
- a4b3e08 arm: rmobile: Add basic R9A07G044L SoC support by Paul Barker · 1 year, 2 months ago
- 387d427 arm: rmobile: Add basic RZ/G2L family support by Paul Barker · 1 year, 2 months ago
- 2e1577e Merge tag 'u-boot-amlogic-20231015' of https://source.denx.de/u-boot/custodians/u-boot-amlogic by Tom Rini · 1 year, 2 months ago
- 30e5b40 arm: dts: imx93: add a per clock for LPUART1 by Alice Guo · 1 year, 5 months ago
- 6bd39de ARM: dts: imx: Switch USB1 port control to GPIO on Data Modul i.MX8M Plus eDM SBC by Marek Vasut · 1 year, 5 months ago
- 10c937f Revert "arm: mvebu: x240: Use i2c-gpio instead of built in controller" by Chris Packham · 1 year, 3 months ago
- b3f559a arm: kirkwood: Add support for ZyXEL NSA325 board by Tony Dinh · 1 year, 4 months ago
- 4df539c ARM64: dts: marvell: cn9310-crb: Remove duplicate pinctrl by Chris Packham · 1 year, 4 months ago
- 6b8efc6 ARM64: dts: marvell: cn9310: Use appropriate label for spi1 pins by Chris Packham · 1 year, 4 months ago
- 7dede40 arm: mach-imx: Makefile: Extend u-boot-nand.imx padding by Hiago De Franco · 1 year, 3 months ago
- 3c3976f imx: spl_imx_romapi.c: remove dead code by Rasmus Villemoes · 1 year, 3 months ago
- 4b44724 imx: spl_imx_romapi: avoid tricky use of spl_load_simple_fit() to get full FIT size by Rasmus Villemoes · 1 year, 3 months ago
- 9960d4a imx8mp: binman: rename spl and u-boot nodes by Rasmus Villemoes · 1 year, 3 months ago
- ae56026 arm: imx: imx8m: add optee configuration to ft_system_setup by Tim Harvey · 1 year, 4 months ago
- 93cac45 arm: dts: imx8m: move CAAM nodes into common u-boot.dtsi by Tim Harvey · 1 year, 4 months ago
- c0887fa arm: dts: imx8mn: protect the firmware/optee node with ifdef by Tim Harvey · 1 year, 4 months ago
- 93aa969 arm: dts: imx8mp: move firmware/optee node to common imx8mp-u-boot.dtsi by Tim Harvey · 1 year, 4 months ago
- bb6a4c5 arm: dts: imx8mm: move firmware/optee node to common imx8mm-u-boot.dtsi by Tim Harvey · 1 year, 4 months ago
- d0dd76f board: toradex: verdin-imx8mm: enable usb sdp spl recovery support by Marcel Ziswiler · 1 year, 4 months ago
- 7db3404 board: gateworks: venice: updates for imx8mp-venice-gw74xx revB PCB by Tim Harvey · 1 year, 4 months ago
- 52346fc board: gateworks: venice: add imx8mm-gw7905-0x support by Tim Harvey · 1 year, 4 months ago
- 8aa5e69 board: gateworks: venice: add imx8mp-gw73xx-2x support by Tim Harvey · 1 year, 4 months ago
- e55422a board: gateworks: venice: add imx8mp-gw72xx-2x support by Tim Harvey · 1 year, 4 months ago
- 6db1085 board: gateworks: venice: add imx8mp-gw71xx-2x support by Tim Harvey · 1 year, 4 months ago
- 004bd3f arm: dts: imx6ull-14x14-evk-u-boot: add rngb by Ricardo Salveti · 1 year, 5 months ago
- 43b1e83 imx: syscounter: allow timer_init for SPL build by Michael Scott · 1 year, 5 months ago
- 7cd53e0 arch: meson: use secure monitor driver by Alexey Romanov · 1 year, 3 months ago
- 67c03a9 arch: meson: sm: set correct order of the includes by Alexey Romanov · 1 year, 3 months ago
- c3be2f1 sandbox: dts: add meson secure monitor node by Alexey Romanov · 1 year, 3 months ago
- 3c3f162 Merge tag 'dm-pull-13oct23' of https://source.denx.de/u-boot/custodians/u-boot-dm by Tom Rini · 1 year, 2 months ago
- 8c5def5 sandbox: remove SCMI base node definition from test.dts by AKASHI Takahiro · 1 year, 2 months ago
- bddcd3a test: dm: simplify SCMI unit test on sandbox by AKASHI Takahiro · 1 year, 2 months ago
- a89d9f4 test: dm: add protocol-specific channel test by AKASHI Takahiro · 1 year, 2 months ago
- a70a897 firmware: scmi: support dummy channels for sandbox agent by AKASHI Takahiro · 1 year, 2 months ago
- 5fecea1 treewide: use dev_read_addr_*_ptr() where appropriate by Matthias Schiffer · 1 year, 3 months ago
- 3cce6fc sandbox: fix spl_board_init by Heinrich Schuchardt · 1 year, 3 months ago
- 6961ca0 Merge tag 'xilinx-for-v2024.01-rc1-v3' of https://source.denx.de/u-boot/custodians/u-boot-microblaze by Tom Rini · 1 year, 2 months ago
- 2c6e288 arm: mach-k3: j721s2_init: Enable memory with CONFIG_K3_J721E_DDRSS by Dominik Haller · 1 year, 4 months ago
- 4dff5aa arm: dts: k3-am68: Sync from Linux tag v6.6-rc1 by Manorit Chawdhry · 1 year, 3 months ago
- 050f8b5 arm: dts: k3-j721s2: Sync from Linux tag v6.6-rc1 by Manorit Chawdhry · 1 year, 3 months ago
- 82d44bf arm: mach-k3: j721s2: Add mcu_timer0 id to the dev list by Manorit Chawdhry · 1 year, 3 months ago
- 0b21d35 Revert "arm: dts: k3-j7*: ddr: Update to 0.10 version of DDR config tool" by Manorit Chawdhry · 1 year, 3 months ago
- df73e79 arm: dts: j7200: dts sync with Linux 6.6-rc1 by Reid Tonking · 1 year, 3 months ago
- 83eb443 arm: mach-k3: j7200: Add mcu_timer0 id to the dev list by Reid Tonking · 1 year, 3 months ago
- 7b4116f meson-a1: dts: add ao secure node by Alexey Romanov · 1 year, 2 months ago
- 87dfb37 meson-a1: dts: add hw rng node by Alexey Romanov · 1 year, 2 months ago
- 1fcf190 clk: Add clock driver for Amlogic A1 by Igor Prusov · 1 year, 3 months ago
- c2bd2d3 expo: Update tests to include textline by Simon Glass · 1 year, 3 months ago
- 1a1d48e configs: Make TI_SECURE_DEVICE default for K3 by Andrew Davis · 1 year, 5 months ago
- 3d5e52b ARM: psci: move GIC address override to Kconfig by Andre Przywara · 1 year, 3 months ago
- 01bf2e2 sandbox: rename overlay sources to .dtso by Rasmus Villemoes · 1 year, 3 months ago
- e6e3a3d arm64: zynqmp: rename overlay sources to .dtso by Rasmus Villemoes · 1 year, 3 months ago
- 35c4bcc iot2050: rename overlay sources to .dtso by Rasmus Villemoes · 1 year, 3 months ago