Gitiles
Code Review Sign In
gerrit.devboardsforandroid.linaro.org / platform / external / u-boot / 9999fc0957fc0b962cb71423b79e7145dacd6c45 / include
  1. 54971ac board: ge: bx50v3: Use pwm for display backlight by Akshay Bhat · 9 years ago
  2. 108f841 ARM: rpi: fix 64-bit CONFIG_SYS_TEXT_BASE by Stephen Warren · 9 years ago
  3. 43c4d44 fdt: implement dev_get_addr_name() by Stephen Warren · 9 years ago
  4. 541c9be Merge branch 'master' of git://www.denx.de/git/u-boot-microblaze by Tom Rini · 9 years ago
  5. 58ed7f6 ARM64: zynqmp: Use i2c cadence DM driver by Michal Simek · 9 years ago
  6. ff9bd8e ARM64: zynqmp: Enable pca953x driver for zcu102 by Michal Simek · 9 years ago
  7. 2978ae2 gpio: Kconfig: Enable Zynq GPIO driver using kconfig by Siva Durga Prasad Paladugu · 9 years ago
  8. 08afaf1 ARM64: zynqmp: Clean header after moving stuff to Kconfig by Michal Simek · 9 years ago
  9. 6c0c958 ARM64: zynqmp: Add support for zc1751 with DC cards by Michal Simek · 9 years ago
  10. 1f4f3d3 ARM64: zynqmp: Add support for ZCU102 platform by Michal Simek · 9 years ago
  11. 407b76f ARM64: zynqmp: Move kernel and fdt offsets and sizes to board config file by Siva Durga Prasad Paladugu · 9 years ago
  12. 1e8d383 ARM: zynq: Do not perform reset at the end of thor by Michal Simek · 9 years ago
  13. 758f29d ARM: zynq: Support systems with more memory banks by Michal Simek · 9 years ago
  14. c1584e2 ARM: zynq: Use memory initialization based on DTS file by Michal Simek · 9 years ago
  15. 371fc58 ARM: zynq: Extend microzed board support by Michal Simek · 9 years ago
  16. 8140132 Merge branch 'master' of git://www.denx.de/git/u-boot-imx by Tom Rini · 9 years ago
  17. 169a855 arm: mvebu: theadorable: Add PEX-switch detection and reset code by Stefan Roese · 9 years ago
  18. 8ac71da arm: mvebu: theadorable: Enable 2nd I2C controller by Stefan Roese · 9 years ago
  19. 28226b9 arm: mvebu: theadorable: Add bootcounter support by Stefan Roese · 9 years ago
  20. 456ecd0 lib/crc8: Add crc start value by Stefan Roese · 9 years ago
  21. d9b2678 disk: part: Enable get_info pointer for CONFIG_SPL_FAT_SUPPORT by Michal Simek · 9 years ago
  22. fe84ebf rpi: remove redundant board files by Stephen Warren · 9 years ago
  23. c8e4d2a drivers: block: fix placement of parameters by Eric Nelson · 9 years ago
  24. d22a765 ARM: add Raspberry Pi 3 64-bit config by Stephen Warren · 9 years ago
  25. 9dbdc6e Merge branch 'master' of git://git.denx.de/u-boot-socfpga by Tom Rini · 9 years ago
  26. 7e8f270 Merge branch 'master' of git://git.denx.de/u-boot-usb by Tom Rini · 9 years ago
  27. f6060ce arm: socfpga: Drop space after 'loadaddr=' in extra env by Marek Vasut · 9 years ago
  28. 723a72af arm: socfpga: migration of CONFIG_SPI_FLASH_BAR by Denis Bakhvalov · 9 years ago
  29. b9f6786 drivers:usb:common:fsl-dt-fixup: Add device-tree fixup support for xhci controller by Sriram Dash · 9 years ago
  30. ac7eef7 board: pic32mzda: enable USB-host, USB-storage support. by Purna Chandra Mandal · 9 years ago
  31. e16e137 Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx by Tom Rini · 9 years ago
  32. 5068946 powerpc: mpc85xx: Enable pre-relocation malloc for MPC85xx by mario.six@gdsys.cc · 9 years ago
  33. b39d121 powerpc: Replace CONFIG_SYS_INIT_RAM_END with CONFIG_SYS_INIT_RAM_SIZE by York Sun · 9 years ago
  34. 4c1ceb6 powerpc: t1040qds: Use generic ethsw commands by Codrin Ciubotariu · 9 years ago
  35. 3c1d218 armv8: LS2080A: Consolidate LS2080A and LS2085A by York Sun · 9 years ago
  36. 2a55583 armv8: ls1043a: load Fman ucode from SD/MMC under SD boot by Qianyu Gong · 9 years ago
  37. fd1b147 armv8: ls1043a: load Fman ucode from NAND flash under NAND boot by Qianyu Gong · 9 years ago
  38. 1b245d9 armv8/ls1043aqds: modify CONFIG_SYS_MAX_FLASH_BANKS to 1 by Wenbin Song · 9 years ago
  39. 5330c7d fsl: esdhc: consolidate fsl_esdhc_cfg structure by Peng Fan · 9 years ago
  40. 4ed6ed3 Merge branch 'master' of git://www.denx.de/git/u-boot-microblaze by Tom Rini · 9 years ago
  41. 07654ba ARM64: zynqmp: Enable EFI partition support by Michal Simek · 9 years ago
  42. 4d1ed9c ARM: zynq: Add uEnv.txt support by Michal Simek · 9 years ago
  43. 679b994 block: Add support for Ceva sata by Michal Simek · 9 years ago
  44. 8d59d7f ARM64: zynqmp: Read RAM information from DT by Michal Simek · 9 years ago
  45. a3afb4a ARM64: Move HUSH enabling from board file to defconfig by Michal Simek · 9 years ago
  46. 46f68e6 ARM64: zynqmp: Enable FAT write and EXT4 write for USB too by Michal Simek · 9 years ago
  47. 5cfd918 ARM64: zynqmp: Decrease boot delay by Soren Brinkmann · 9 years ago
  48. a359eaa microblaze: Remove !OF_CONTROL code for timer and interrupt by Michal Simek · 9 years ago
  49. 996503e ARM: zynq: zybo: Enabling reading MAC address from EEPROM by Michal Simek · 9 years ago
  50. b7b3efe ARM: zynq: Enable option to overwrite default variables by Michal Simek · 9 years ago
  51. 217185b zynq-common: Enable phy driver for Xilinx PCS/PMA core by Siva Durga Prasad Paladugu · 9 years ago
  52. ed6fad3 phy: Add phy driver support for xilinx PCS/PMA core by Siva Durga Prasad Paladugu · 9 years ago
  53. 606576d arm: mvebu: Add basic support for Armada 375 eval board db-88f6720 by Stefan Roese · 9 years ago
  54. 0b45a79 dt-bindings: Add include/dt-bindings/phy/phy.h from Linux v4.4 by Stefan Roese · 9 years ago
  55. 99d4c6d net: mvpp2.c: Add Marvell mvpp2 network driver for Armada 375 by Stefan Roese · 9 years ago
  56. 6baa261 mx7_common: Define CONFIG_SYS_MALLOC_LEN in the board file by Fabio Estevam · 9 years ago
  57. 01f512b warp7: Pass the UART base definition by Fabio Estevam · 9 years ago
  58. a473122 arm: mxs: Update MX28EVK config by Marek Vasut · 9 years ago
  59. e40cf34 drivers: block: add block device cache by Eric Nelson · 9 years ago
  60. 626f048 board: Add Qualcomm Dragonboard 410C support by Mateusz Kulikowski · 9 years ago
  61. 04868b4 drivers: Add SPMI bus uclass by Mateusz Kulikowski · 9 years ago
  62. d144f96 ehci-ci.h: drop generic USBCMD fields by Mateusz Kulikowski · 9 years ago
  63. d424efb usb: ehci-ci: Add missing registers. by Mateusz Kulikowski · 9 years ago
  64. e162c6b usb: Rename ehci-fsl.h to ehci-ci.h by Mateusz Kulikowski · 9 years ago
  65. d3d844f usb: ulpi: Fix compile warning in read/write on 64-bit machines. by Mateusz Kulikowski · 9 years ago
  66. 2cbe57c usb: ulpi: Fix viewport_addr type by Mateusz Kulikowski · 9 years ago
  67. 5493a32 Migrate CONFIG_ULPI* to Kconfig by Mateusz Kulikowski · 9 years ago
  68. 39fbac9 board: ti: DRA7: Add DP83867 TI phy for rev c by Dan Murphy · 9 years ago
  69. 44b0cf4 kc1: Add some sysboot and devicetree-related environment variables by Paul Kocialkowski · 9 years ago
  70. f5fdc37 kc1: Include explicit serial baudrate on bootargs by Paul Kocialkowski · 9 years ago
  71. 5fcbca5 sniper: Include explicit serial baudrate on bootargs by Paul Kocialkowski · 9 years ago
  72. 27ce696 configs: ti_armv7_keystone2: make SYS_TEXT_BASE configurable at build time by Vitaly Andrianov · 9 years ago
  73. f031f50 rpi: BCM2837 and Raspberry Pi 3 32-bit support by Stephen Warren · 9 years ago
  74. adb91ec ARM: bcm2835: move CONFIG_BCM283* to Kconfig by Stephen Warren · 9 years ago
  75. f8bb696 Drop command-processing code when CONFIG_CMDLINE is disabled by Simon Glass · 9 years ago
  76. 40345e9 Merge branch 'master' of http://git.denx.de/u-boot-sunxi by Tom Rini · 9 years ago
  77. d96ebc4 sunxi: Add support for Allwinner A64 SoCs by Siarhei Siamashka · 9 years ago
  78. 7f5b1e9 ARM: uniphier: remove CONFIG_ARP_TIMEOUT define by Masahiro Yamada · 9 years ago
  79. 15826e7 ARM: uniphier: drop unneeded defines related to legacy serial driver by Masahiro Yamada · 9 years ago
  80. 61a4f5b ARM: uniphier: add sramupdate command by Masahiro Yamada · 9 years ago
  81. 86c3345 ARM: uniphier: make u-boot-with-spl.bin really available by Masahiro Yamada · 9 years ago
  82. 0c935ac sunxi: usb_phy: Add support for A83T USB PHYs by Chen-Yu Tsai · 9 years ago
  83. 38491d9 power: axp818: Add support for FLDOs by Chen-Yu Tsai · 9 years ago
  84. b25b7ad sunxi: axp: Support VBUS drive GPIO on AXP818 by Chen-Yu Tsai · 9 years ago
  85. 81a8aa3 sunxi: axp: Generalize register macros for VBUS drive GPIO by Chen-Yu Tsai · 9 years ago
  86. b270eaa power: axp818: Remove undefined axp818_init() by Chen-Yu Tsai · 9 years ago
  87. 0badc64 Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriq by Tom Rini · 9 years ago
  88. ed2530d armv8/ls2080ardb: Enable VID support by Rai Harninder · 9 years ago
  89. 85bb389 SECURE BOOT: Change fsl_secboot_validate func to pass image addr by Saksham Jain · 9 years ago
  90. c4666cf SECURE BOOT: Halt execution when secure boot fail by Saksham Jain · 9 years ago
  91. 2bfe489 SECURE_BOOT: Use default bootargs by Saksham Jain · 9 years ago
  92. 3f701cc armv8: fsl-lsch3: Copy Bootscript and header from NOR to DDR by Saksham Jain · 9 years ago
  93. fcfdb6d armv8: ls2080rdb: ls2080qds: Add secure boot support by Saksham Jain · 9 years ago
  94. fd6dbc9 armv8: fsl-lsch3: Add new header for secure boot by Saksham Jain · 9 years ago
  95. 3808190 armv8: ls2080: Add SFP Configs for LS2080 by Saksham Jain · 9 years ago
  96. f9e8a98 zipitz2: enable caches by Vasily Khoruzhick · 9 years ago
  97. 9cfc059 pxa: add support for D- and I- caches by Vasily Khoruzhick · 9 years ago
  98. afed7eb zipitz2: enable USB host support by Vasily Khoruzhick · 9 years ago
  99. 634890b pxa-common: pxa27x has 3 OHCI ports by Vasily Khoruzhick · 9 years ago
  100. fa89b53 zipitz2: enable libfdt by Vasily Khoruzhick · 9 years ago