1. 99de168 imx8ulp: assign PXP/HIFI4/EPDC to APD domain by Peng Fan · 3 years, 3 months ago
  2. d563d29 arm: imx8ulp: Allocate LPAV resources to AP domain by Ye Li · 3 years, 3 months ago
  3. 961ac78 imx8ulp: soc: Check the DBD_EN fuse before setting RDC by Ye Li · 3 years, 3 months ago
  4. 89ca5a7 ARM: imx8m: support env in fat and ext4 by Ricardo Salveti · 3 years, 3 months ago
  5. af60263 imx: nandbcb: Fix printf format in write_fcb by Pali Rohár · 3 years, 3 months ago
  6. 91f27f3 mxs: power: Change sequence of enabling DCDC switches by Lukasz Majewski · 3 years, 3 months ago
  7. cd0ecb3 imx8mm-venice-gw7902: fix M2_RST# gpio pinmux by Tim Harvey · 3 years, 4 months ago
  8. 8b71576 mx7ulp_com: add support for SPL by Ricardo Salveti · 3 years, 4 months ago
  9. 498eedc mx7ulp: select soc features by Oleksandr Suvorov · 3 years, 4 months ago
  10. 6ff55bc arm: imx: imx8mq: add support to get values for more clocks by Heiko Thiery · 3 years, 5 months ago
  11. 3aaabfe Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-sunxi by Tom Rini · 3 years ago
  12. ce2b6c4 ARM: dts: suniv: Add device tree files and bindings for F1C100s by Icenowy Zheng · 3 years ago
  13. cfe673c mach-sunxi: Add support for SUNIV architecture by Icenowy Zheng · 3 years ago
  14. 645ee3c sunxi: Add F1C100s DRAM initial support by Icenowy Zheng · 3 years ago
  15. 5d35f0f ARM: sunxi: Add clock and uart to sunxi headers by Icenowy Zheng · 3 years ago
  16. 88998f7 arm: arm926ej-s: Add sunxi code by Icenowy Zheng · 3 years ago
  17. 0d4377f mach-sunxi: Move timer code to mach folder by Jesse Taube · 3 years ago
  18. 508f75a arm: arm926ej-s: start.S: port save_boot_params support from armv7 code by Icenowy Zheng · 3 years ago
  19. b8cd7f4 armv8: remove no longer needed lowlevel_init.S by Andre Przywara · 3 years ago
  20. 534b82a sunxi: move early "SRAM setup" into separate file by Andre Przywara · 3 years ago
  21. 2564fce sunxi: move Cortex SMPEN setting into start.S by Andre Przywara · 3 years ago
  22. 5bc4cd0 sunxi: move non-essential code out of s_init() by Andre Przywara · 3 years ago
  23. 68f0896 armv8: start.S: remove CONFIG_SYS_RESET_SCTRL code by Andre Przywara · 3 years ago
  24. 22eb7ba armv8: spl: Fix build with LINUX_KERNEL_IMAGE_HEADER by Alper Nebi Yasak · 3 years ago
  25. 681adaa arm: dts: ls1028a-qds: declare in-band autoneg for Ethernet ports by Vladimir Oltean · 3 years, 1 month ago
  26. bee9fd2 arm: dts: ls1028a-rdb: sync device tree with Linux by Vladimir Oltean · 3 years, 1 month ago
  27. 50c49ef arm: dts: ls1028a-rdb: enable PCIe controllers from U-Boot dtsi by Vladimir Oltean · 3 years, 1 month ago
  28. f33fad6 arm: dts: ls1028a-rdb: disable I2C buses 1 through 7 by Vladimir Oltean · 3 years, 1 month ago
  29. 5b0f8ee arm: dts: ls1028a-rdb: disable DSPI nodes by Vladimir Oltean · 3 years, 1 month ago
  30. 4a5362f arm: dts: ls1028a-rdb: sync Ethernet device tree nodes with Linux by Vladimir Oltean · 3 years, 1 month ago
  31. 5009b11 arm: dts: ls1028a-rdb: sort nodes alphabetically by Vladimir Oltean · 3 years, 1 month ago
  32. aa05862 arm: dts: lx2160a-rdb: use Linux compatible string for RTC by Vladimir Oltean · 3 years, 1 month ago
  33. 41496cc arm: dts: ls1028a-rdb: use Linux compatible string for RTC by Vladimir Oltean · 3 years, 1 month ago
  34. 801f4b0 arm: dts: ls1028a-qds: use Linux compatible string for RTC by Vladimir Oltean · 3 years, 1 month ago
  35. 246b7e6 arm: dts: lx2160a-qds: use Linux compatible string for RTC by Vladimir Oltean · 3 years, 1 month ago
  36. 5d0b044 arm: dts: ls1088a-rdb: use Linux compatible string for RTC by Vladimir Oltean · 3 years, 1 month ago
  37. 489c428 arm: dts: ls1088a-qds: use Linux compatible string for RTC by Vladimir Oltean · 3 years, 1 month ago
  38. 2e14b1f arm/expu1/seli8: adapt dts NOR partition table to the latest used by Aleksandar Gerasimovski · 3 years, 2 months ago
  39. 7539bb3 arm: ls1021a: limit debug eth phy speed to 100Mbps by Aleksandar Gerasimovski · 3 years, 2 months ago
  40. a1d2fd3 board: traverse: add initial Ten64 support by Mathew McBride · 3 years ago
  41. 71dcfa9 arm: kirkwood: Pogoplug-V4 : Add Kconfig files by Tony Dinh · 3 years ago
  42. cd19787 arm: kirkwood: Pogoplug-V4 : Add DTS files by Tony Dinh · 3 years ago
  43. e97943b sunxi: Fix H616 DRAM read calibration for dual rank by Jernej Skrabec · 3 years ago
  44. 18a5927 sunxi: fix H616 DRAM ODT support by Jernej Skrabec · 3 years ago
  45. 52bcc4f sunxi: Add option to prevent booting on power plug-in by Chris Morgan · 3 years ago
  46. 8695b51 sunxi: gpio: Fix up pointer arithmetic by Andre Przywara · 3 years ago
  47. efdd656 sunxi: gpio: Add per-bank drive and pull setters by Samuel Holland · 3 years, 3 months ago
  48. ac5397a sunxi: gpio: Return void from setter functions by Samuel Holland · 3 years, 3 months ago
  49. afe5163 ARM: dts: k3-am642-sk: Disable cpsw_port1 in SPL by Vignesh Raghavendra · 3 years ago
  50. 22c0815 configs: stm32mp15: Enable OF_BOARD flag by Patrice Chotard · 3 years ago
  51. 94e561f stm32prog: add partition name in treat_partition_list error messages by Patrick Delaunay · 3 years ago
  52. 332facc ARM: dts: stm32: Synchronize DHCOM DTs with Linux 5.15.12 by Marek Vasut · 3 years, 1 month ago
  53. 6b8bd70 ARM: dts: stm32: Synchronize DHCOR DTs with Linux 5.15.12 by Marek Vasut · 3 years, 1 month ago
  54. bd485f9 arm: dts: stm32mp15: alignment with v5.16 by Patrick Delaunay · 3 years, 1 month ago
  55. 5c68904 stm32mp: correct the dependency for bootcount configs by Patrick Delaunay · 3 years, 2 months ago
  56. d5e8119 stm32mp: remove the bootcount activation by Patrick Delaunay · 3 years, 2 months ago
  57. 3919aa1 ARM: dts: stm32: Add DFU support for DHCOR recovery by Marek Vasut · 3 years, 2 months ago
  58. 757c838 arm: stm32mp: Fix USB boot device report by Marek Vasut · 3 years, 2 months ago
  59. 16f4d36 arm: dts: rz-g2-beacon-u-boot: Enable pinmux for QSPI by Adam Ford · 3 years ago
  60. 3425dec Convert CONFIG_AT91_EFLASH to Kconfig by Patrick Delaunay · 3 years, 1 month ago
  61. d3877fb Convert CONFIG_BOOTP_SERVERIP to Kconfig by Simon Glass · 3 years, 1 month ago
  62. d6b318d Convert CONFIG_TIMESTAMP to Kconfig by Simon Glass · 3 years, 1 month ago
  63. 2d7a463 Merge https://source.denx.de/u-boot/custodians/u-boot-marvell by Tom Rini · 3 years ago
  64. 280db76 Merge tag 'doc-2022-04-rc1' of https://source.denx.de/u-boot/custodians/u-boot-efi by Tom Rini · 3 years ago
  65. 0d582a4 arm: mvebu: spl: Fix 100 column exceeds by Marek Behún · 3 years ago
  66. 37241ce arm: mvebu: spl: Use IS_ENABLED() instead of #ifdef where possible by Marek Behún · 3 years ago
  67. c894566 arm: mvebu: spl: Use preferred types u8/u16/u32 instead of uintN_t by Marek Behún · 3 years ago
  68. 62ee75a arm: mvebu: spl: Print srcaddr in error message by Marek Behún · 3 years ago
  69. 402e84e arm: mvebu: Check for kwbimage data checksum by Pali Rohár · 3 years ago
  70. f830703 arm: mvebu: Check that kwbimage blockid matches boot mode by Pali Rohár · 3 years ago
  71. 2e0429b SPL: Add struct spl_boot_device parameter into spl_parse_board_header() by Pali Rohár · 3 years ago
  72. 66f8748 arm: mvebu: Check that kwbimage offset and blocksize are valid by Pali Rohár · 3 years ago
  73. 4364071 pci: pci_mvebu: Add support for Kirkwood PCIe controllers by Pali Rohár · 3 years ago
  74. 3058e28 fdt_support: Add fdt_for_each_node_by_compatible() helper macro by Marek Behún · 3 years ago
  75. 185f812 doc: replace @return by Return: by Heinrich Schuchardt · 3 years ago
  76. 068415e Merge tag 'xilinx-for-v2022.04-rc1' of https://source.denx.de/u-boot/custodians/u-boot-microblaze by Tom Rini · 3 years ago
  77. b24b201 Merge https://source.denx.de/u-boot/custodians/u-boot-samsung by Tom Rini · 3 years ago
  78. 71efd45 arm64: zynqmp: Change firmware dependency by Michal Simek · 3 years ago
  79. d10807a arm64: xilinx: dts: Add dma properties to fix dtbs_check warnings by Shravya Kumbham · 3 years ago
  80. 1d70cc7 arm64: zynqmp: Update USB node handle from dwc3 to usb by Manish Narani · 3 years ago
  81. 59b21d2 arm64: zynqmp: Change compatible strings for cadence uart by Michal Simek · 3 years ago
  82. abc7589 ARM: dts: ast2600: Add MDIO devices by Dylan Hung · 3 years, 2 months ago
  83. 3739cd5 ARM: dts: s700: add MMC/SD controller node by Amit Singh Tomar · 3 years, 2 months ago
  84. a7e7bae ARM: dts: sync Actions Semi S700 DT from Linux v5.16-rc3 by Amit Singh Tomar · 3 years, 2 months ago
  85. 2fd81be common: board_r: move init_addr_map() to init.h by Ovidiu Panait · 3 years, 1 month ago
  86. 1b212bb common: board_r: drop initr_addr_map wrapper by Ovidiu Panait · 3 years, 1 month ago
  87. 027b0e9 common: spl: move armv7m-specific code to spl_perform_fixups() by Ovidiu Panait · 3 years, 1 month ago
  88. 4e81f3b Merge branch '2022-01-15-TI-platform-updates' by Tom Rini · 3 years ago
  89. 6d2ebcd Merge tag 'u-boot-at91-2022.04-b' of https://source.denx.de/u-boot/custodians/u-boot-at91 by Tom Rini · 3 years ago
  90. e92ebf9 ARM: dts: at91: sama7g5ek: move eeproms to flexcom8 by Eugen Hristev · 3 years, 1 month ago
  91. 4727f95 ARM: dts: at91: sama7g5: add flx8 and required nodes by Eugen Hristev · 3 years, 1 month ago
  92. 97187d5 power: domain: Add Apple pmgr driver by Mark Kettenis · 3 years ago
  93. 6034c91 arm: dts: apple: Add u-boot,dm-pre-reloc properties by Mark Kettenis · 3 years ago
  94. c918e2c arm: dts: apple: Update Apple M1 device trees by Mark Kettenis · 3 years ago
  95. ef7be5a ARM: dts: K3-am642-r5-sk: Enable Second CPSW port in R5/A53 SPL by Vignesh Raghavendra · 3 years, 1 month ago
  96. 07252f5 mach-k3: am64_spl: Alias Ethernet RGMII boot to CPGMAC by Vignesh Raghavendra · 3 years, 1 month ago
  97. 93c43a8 mach-k3: am642_init: Probe AM65 CPSW NUSS for R5/A53 SPL by Vignesh Raghavendra · 3 years, 1 month ago
  98. e58d928 mach-k3: common: Instantiate AM65 CPSW NUSS wrapper by Vignesh Raghavendra · 3 years, 1 month ago
  99. 5842163 ARM: mach-k3: sysfw-loader: Copy sysfw.itb to OCRAM in OSPI/SPI bootmode by Vignesh Raghavendra · 3 years, 1 month ago
  100. 67c8678 arm: mach-k3: am642_init: Unlock MCU PADCFG regs by Michael Liebert · 3 years, 1 month ago