1. 9f008bb MX31: Cleanup clock function by Stefano Babic · 13 years ago
  2. 386393c scb9328: Add ARM relocation support by Torsten Koschorrek · 13 years ago
  3. 49473ad am3517evm: change console device from ttyS2 to ttyO2 by Yegor Yefremov · 13 years ago
  4. a55d23c Remove volatile qualifier in get_ram_size() calls by Albert ARIBAUD · 13 years ago
  5. 930f335 TI: TNETV107X Fix Build Error by Chan-Taek Park · 13 years ago
  6. 2219354 ARM: add missing CONFIG_SKIP_LOWLEVEL_INIT for armv7 by Rob Herring · 13 years ago
  7. 7eb2939 arm: add CONFIG_MACH_TYPE setting and documentation by Igor Grinberg · 13 years ago
  8. 0b9bc73 arm: add __ilog2 function by Rob Herring · 13 years ago
  9. a60d1e5 Timer: Fix misuse of ARM *timer_masked() functions outside arch/arm by Graeme Russ · 13 years ago
  10. 4e0499e EfikaMX: Enable EXT2 booting by Marek Vasut · 13 years ago
  11. 745525f EfikaMX: Add missing CONFIG_SYS_TEXT_BASE by Jana Rapava · 13 years ago
  12. 7103fa6 EfikaMX: Use correct imximage.cfg by Jana Rapava · 13 years ago
  13. 727024a MX27: Update to autogenerated asm-offsets.h by Stefano Babic · 13 years ago
  14. 0edf8b5 MX5: Update to autogenerated asm-offsets.h by Stefano Babic · 13 years ago
  15. 39f0023e imx: Add support for zmx25 board by Matthias Weisser · 13 years ago
  16. 95d1858 imx: Make imx25 compatible to mxc_gpio driver and fix in tx25 by Matthias Weisser · 13 years ago
  17. 23210d8 imx: Add auto generation of asm-offsets.h for imx25 by Matthias Weisser · 13 years ago
  18. dddb7c9 imx: Add support for USB EHCI on imx25 by Matthias Weisser · 13 years ago
  19. dea5387 imx: Use correct imx25 reset.c by Matthias Weisser · 13 years ago
  20. a7f39e7 imx: Add get_tbclk() function for imx25 by Matthias Weisser · 13 years ago
  21. 81d668e ARM: Update maintainer of board scb9328 by Torsten Koschorrek · 13 years ago
  22. 3f7bfbd mx27: Make the UART port number explicit by Fabio Estevam · 13 years ago
  23. f456445 build: Add targets for auto gen of asm-offsets.h and use it in imx35 by Matthias Weisser · 13 years ago
  24. 026ca65 mx31pdk: cosmetic: Fix line over 80 characters by Fabio Estevam · 13 years ago
  25. 68d4230 powerpc/85xx: Add default usb mode and phy type to hwconfig by Ramneek Mehresh · 13 years ago
  26. 80e5c83 powerpc/corenet_ds: add back buffer write for NOR flash by York Sun · 13 years ago
  27. 2600282 powerpc/85xx: remove SERDES4 soft-reset work-around by Timur Tabi · 14 years ago
  28. 23f9670 powerpc/mpc8xxx: Allow override DDR read-to-write turnaround time by York Sun · 13 years ago
  29. 86dda50 qoriq/p1_p2_rdb: USB device-tree fixups for P1020 by Ramneek Mehresh · 14 years ago
  30. 636c316 powerpc/85xx: Specify hwconfig usage for USB controller by Ramneek Mehresh · 14 years ago
  31. 72f4980 powerpc/8xxx: Update USB mode device tree fixup by Ramneek Mehresh · 13 years ago
  32. 3f7f6b8 powerpc/85xx: Add basic support for P1023RDS board by Roy Zang · 13 years ago
  33. 939e5bf powerpc/mpc85xx: Display a warning for unsupported DDR data rates by York Sun · 13 years ago
  34. 79fa00a powerpc/corenet_ds: Fix RCW overriding for RDIMM by York Sun · 13 years ago
  35. 4c99cb9 powerpc/mpc8xxx: fix DDR data width checking by York Sun · 13 years ago
  36. f2d264b powerpc/mpc8xxx: Adding fallback to raw timing on supported boards by York Sun · 13 years ago
  37. 1b3e3c4 powerpc/mpc8xxx: Enable calculation for fixed DDR chips by York Sun · 13 years ago
  38. aeb6716 powerpc/85xx: Fix pin muxing for second USB controller by Felix Radensky · 13 years ago
  39. c49290c Adding more SPD registers by York Sun · 13 years ago
  40. 51d498f powerpc/mpc8xxx: Add 16-bit support for DDR3 by York Sun · 13 years ago
  41. d224654 powerpc/mpc8xxx: check SPD length before using part number by York Sun · 13 years ago
  42. e090aa7 powerpc/mpc8xxx: adjust DDR burst length and chop accroding to sdram width by York Sun · 13 years ago
  43. 26fd33b powerpc/86xx: display boot device and bank on the MPC8610 HPCD by Timur Tabi · 14 years ago
  44. 374a235 powerpc/85xx: Add NAND boot support for P3041/P5020DS by Shaohui Xie · 14 years ago
  45. 1f97987 powerpc/85xx: Add P2041 processor support by Kumar Gala · 14 years ago
  46. 526cbff powerpc/p2040: Add various p2040 specific information by Mingkai Hu · 14 years ago
  47. 58b2f96 powerpc/85xx: Fix compile errors if CONFIG_SYS_DPAA_QBMAN isn't set by Kumar Gala · 13 years ago
  48. eb51f63 qoriq/p1_p2_rdb: Add Dual Role USB support macro for P1020RDB by Ramneek Mehresh · 14 years ago
  49. 9829fef powerpc/85xx: Fix compile errors if CONFIG_SYS_{BR,OR}0_PRELIM aren't set by Kumar Gala · 13 years ago
  50. be1ff61 powerpc/85xx: Fix compile errors if CONFIG_SYS_{B,Q}MAN_MEM_PHYS aren't set by Kumar Gala · 13 years ago
  51. 810cb19 MPC83XX: Fix PCI express clock setup by Bill Cook · 13 years ago
  52. f5f30de powerpc/83xx: remove empty board_early_init_f() by Timur Tabi · 14 years ago
  53. 7fb3e7a mpc83xx: Add support for MergerBox board by Andre Schwarz · 14 years ago
  54. 03c0a92 MPC83xx: add config options for memory setup. by Andre Schwarz · 14 years ago
  55. a7b8126 MPC83xx: add define for global half-strength enable (HSE) by Andre Schwarz · 14 years ago
  56. 1bda162 MPC837x: set i2c1_clk by Andre Schwarz · 14 years ago
  57. 9a865ff fsl_dma: fix support for 83xx DMA engine by Ira W. Snyder · 14 years ago
  58. 7964209 Add support for Network Space v2 and parents by Simon Guinot · 13 years ago
  59. 01fa4e8 arm/km: add support for portl2 board by Valentin Longchamp · 13 years ago
  60. 83b40c3 arm/km: replace suenx targets with km_kirkwood by Holger Brunck · 13 years ago
  61. 8f2827f arm/km: ethernet support for mgcoge3un by Valentin Longchamp · 13 years ago
  62. 680cfaf arm/km: use board KM_ENV_BUS for CONFIG_I2C_ENV_EEPROM_BUS by Valentin Longchamp · 13 years ago
  63. 288f99b arm/km: remove unneeded define by Holger Brunck · 13 years ago
  64. b5befd8 arm/km: fix u-boot.kwb build breakage by Holger Brunck · 13 years ago
  65. b31a82e arm/kirkwood: if CONFIG_SOFT_I2C is set don't set CONFIG_I2C_MVTWSI by Holger Brunck · 13 years ago
  66. 24e5046 Fix compiler error for cpu at91sam9, if lowlevel init is enabled by Jens Scharsig · 13 years ago
  67. 2217865 atstk100x: switch to common cfi driver by Andreas Bießmann · 13 years ago
  68. 18ed5e9 driver/serial: delete at91rm9200_usart by Andreas Bießmann · 13 years ago
  69. dbbf13b cpuat91: use atmel_usart by Andreas Bießmann · 13 years ago
  70. 5a05cb7 eb_cpux9k2: use atmel_usart by Andreas Bießmann · 13 years ago
  71. 3432a93 at91rm9200ek: use atmel_usart by Andreas Bießmann · 13 years ago
  72. d703355 arm920t/at91: add at91rm9200_devices.c by Andreas Bießmann · 13 years ago
  73. 6a372e9 arm920t/at91: use new clock.c features by Andreas Bießmann · 13 years ago
  74. c3a383f arm920t/at91: add clock.c by Andreas Bießmann · 13 years ago
  75. 876ef43 at91rm9200.h: fix ATMEL_PMX_AA_TXD2 by Andreas Bießmann · 13 years ago
  76. ea11382 vision2: Fix build due to WEIM registers name change by Fabio Estevam · 13 years ago
  77. 47c3e07 MX53: Add initial support for MX53ARD by Fabio Estevam · 13 years ago
  78. a6e961c MX5: Introduce a function for setting the chip select size by Fabio Estevam · 13 years ago
  79. a682b3f MX5: Add iomux structure by Fabio Estevam · 13 years ago
  80. ac4020e MX5: Make the weim structure complete by Fabio Estevam · 13 years ago
  81. a91916f arm: Update jadecpu board by Matthias Weisser · 13 years ago
  82. 0aeb01d arm: omap2: apollon: fix broken build by Igor Grinberg · 13 years ago
  83. aadcfc1 OMAP[34]: fix broken timer by John Rigby · 14 years ago
  84. f84d64d arm: Tegra2: GPIO: enable GPIO for Tegra2 boards by Tom Warren · 13 years ago
  85. 4e5ae09 GPIO: Tegra2: add GPIO driver for Tegra2 by Tom Warren · 13 years ago
  86. f310830 VCMA9: various cleanups/code style fixes by David Müller (ELSOFT AG) · 14 years ago
  87. 6d75484 VCMA9: use CFI driver (and remove the old one) by David Müller (ELSOFT AG) · 14 years ago
  88. 0bf42fe VCMA9: remove unneeded config.mk by David Müller (ELSOFT AG) · 14 years ago
  89. 137db2d armv7: adapt s5pc1xx to the new cache maintenance framework by Aneesh V · 13 years ago
  90. 45bf058 armv7: adapt omap3 to the new cache maintenance framework by Aneesh V · 13 years ago
  91. 8b457fa armv7: adapt omap4 to the new cache maintenance framework by Aneesh V · 13 years ago
  92. 93bc219 armv7: add PL310 support to u-boot by Aneesh V · 13 years ago
  93. e05f007 arm: minor fixes for cache and mmu handling by Aneesh V · 13 years ago
  94. c2dd0d4 armv7: integrate cache maintenance support by Aneesh V · 13 years ago
  95. e47f2db armv7: rename cache related CONFIG flags by Aneesh V · 13 years ago
  96. 2c451f7 armv7: cache maintenance operations for armv7 by Aneesh V · 13 years ago
  97. 4c93da7 arm: make default implementation of cache_flush() weakly linked by Aneesh V · 13 years ago
  98. ff6b47a Makefile: need to remove generated u-boot-nand_spl.lds by Kumar Gala · 13 years ago
  99. eced462 NAND: Add 16bit NAND support for the NDFC by Alex Waterman · 13 years ago
  100. c949486 cmd_nand: add nand write.trimffs command by Ben Gardiner · 13 years ago