Gitiles
Code Review
Sign In
gerrit.devboardsforandroid.linaro.org
/
platform
/
external
/
u-boot
/
a375ff8e14bea0a5cbfff99d6456aa8d9a3320ab
/
arch
/
arm
/
Kconfig
« Previous
7a500a7
ARM: rmobile: Create R-Car 32bit (Gen1 and Gen2) for Kconfig
by Nobuhiro Iwamatsu
· 8 years ago
1cc95f6
ARM: Rmobile: Rename CONFIG_RMOBILE to CONFIG_ARCH_RMOBILE
by Nobuhiro Iwamatsu
· 9 years ago
badbb63
ARM: rmobile: Move SoC sources to mach-rmobile
by Nobuhiro Iwamatsu
· 9 years ago
7d10624
omap3, omap4: Enable USE_TINY_PRINTF for all
by Tom Rini
· 8 years ago
a2ea62e
omap3: Move to select SUPPORT_SPL for all
by Tom Rini
· 8 years ago
bb6b142
treewide: move CONFIG_PHYS_64BIT to Kconfig
by Masahiro Yamada
· 8 years ago
28559d4
ARM64: zynqmp: Do not enable DM_MMC by default
by Michal Simek
· 8 years ago
329a449
dm: mmc: zynq: Convert zynq to use driver model for MMC
by Simon Glass
· 8 years ago
dec49e8
dm: zynq: usb: Convert to CONFIG_DM_USB
by Simon Glass
· 8 years ago
a381bcf
ARM64: rockchip: add support for rk3399 SoC based evb
by Kever Yang
· 8 years ago
e0f5dbc
rockchip: Clean up CPU selection
by Andreas Färber
· 8 years ago
1f29738
ARM64: zynqmp: Enable CLK and SPL_CLK by default
by Michal Simek
· 8 years ago
42b37d8
dm: mmc: rockchip: Enable CONFIG_DM_MMC_OPS for all boards
by Simon Glass
· 8 years ago
aa15038
rockchip: Use 'select' instead of defaults in Kconfig
by Simon Glass
· 8 years ago
a4d7999
board/BuR: rename kwb board to brxre1
by Hannes Schmelzer
· 8 years ago
2290fe0
board/BuR: rename tseries board to brppt1
by Hannes Schmelzer
· 8 years ago
9f82361
Kconfig: Add a new DISTRO_DEFAULTS Kconfig option
by Hans de Goede
· 8 years ago
8c7d229
sunxi: Select USE_TINY_PRINTF
by Hans de Goede
· 8 years ago
51ea5a0
ARM: uniphier: reserve memory for DRAM PHY training on PH1-LD20
by Masahiro Yamada
· 8 years ago
7142343
arm, am335x: siemens: enable DM/DTS support
by Heiko Schocher
· 8 years ago
9702ec0
armv8: s32v234: Introduce basic support for s32v234evb
by Eddy Petrișor
· 8 years ago
43486e4
board: arm:: Add support for Broadcom BCM23550
by Steve Rae
· 8 years ago
6b3943f
siemens,am33x: add draco etamin board
by Heiko Schocher
· 8 years ago
d8ccbe9
am335x, shc: add support for the am335x based bosch shc board
by Heiko Schocher
· 8 years ago
d77fa2f
Merge http://git.denx.de/u-boot-samsung
by Tom Rini
· 8 years ago
cdaa633
arm/arm64: implement a boot header capability
by Andre Przywara
· 8 years ago
c41c649
Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriq
by Tom Rini
· 8 years ago
ff78aa2
armv8: ls1012a: Add support of ls1012afrdm board
by Prabhakar Kushwaha
· 8 years ago
3b6e389
armv8: ls1012a: Add support of ls1012ardb board
by Prabhakar Kushwaha
· 8 years ago
9d044fc
armv8: ls1012a: Add support of ls1012aqds board
by Prabhakar Kushwaha
· 8 years ago
66020a6
arm: config: Introduce CONFIG_SYS_ARM_ARCH
by Marek Vasut
· 8 years ago
b4ba169
arm: Select CONFIG_ARM64 for Cavium ThunderX
by Marek Vasut
· 8 years ago
a774e08
ti: omap-common: Add Kconfig file for secure device support
by Madan Srinivas
· 8 years ago
6384726
arm: Kconfig: Add support for AM43xx SoC specific Kconfig
by Madan Srinivas
· 8 years ago
bfcef28
arm: add initial support for Amlogic Meson and ODROID-C2
by Beniamino Galvani
· 9 years ago
0878a8a
sunxi: Enable a bunch of commands by default on sunxi
by Hans de Goede
· 9 years ago
36aa893
arm: exynos: realign the code to allow support for newer 64-bit platforms
by Thomas Abraham
· 9 years ago
e6a9ed0
ARM64: zynqmp: Add SPL support support
by Michal Simek
· 9 years ago
cd593ed
ARM: hisilicon: hikey: Enable OF_CONTROL for hikey board.
by Peter Griffin
· 9 years ago
541c9be
Merge branch 'master' of git://www.denx.de/git/u-boot-microblaze
by Tom Rini
· 9 years ago
2978ae2
gpio: Kconfig: Enable Zynq GPIO driver using kconfig
by Siva Durga Prasad Paladugu
· 9 years ago
885581a
ARM64: zynqmp: Do not setup DM_ETH/GPIO/MMC by default for all boards
by Michal Simek
· 9 years ago
88bb800
sunxi: Enable CMD_GPIO on all sunxi boards
by Hans de Goede
· 9 years ago
606576d
arm: mvebu: Add basic support for Armada 375 eval board db-88f6720
by Stefan Roese
· 9 years ago
0859213
arm: Add support for Qualcomm Snapdragon family
by Mateusz Kulikowski
· 9 years ago
8434f03
sunxi: Depend SPL configs on SUPPORT_SPL
by Alexander Graf
· 9 years ago
37217f0
ARM: asm: types: Introduce DMA_ADDR_T_64BIT
by Lokesh Vutla
· 9 years ago
f19eb15
zipitz2: restore board support
by Vasily Khoruzhick
· 9 years ago
d75111a
sunxi: Select CONFIG_OF_BOARD_SETUP from arch/arm/Kconfig
by Hans de Goede
· 9 years ago
534bc70
ARM: keystone2: Switch to using the poweroff command
by Tom Rini
· 9 years ago
5f8bb93
ti: AM437x: Use generic EEPROM detection logic
by Nishanth Menon
· 9 years ago
770e68c
ti: AM335x: Use generic EEPROM detection logic
by Nishanth Menon
· 9 years ago
fe5ea57
ARM: uniphier: prepare directory structure for ARMv8 SoC support
by Masahiro Yamada
· 9 years ago
4aceb3f
ARM: uniphier: enable UniPhier SD/MMC host driver
by Masahiro Yamada
· 9 years ago
b800cbd
ARM: uniphier: enable GPIO command and driver for UniPhier SoCs
by Masahiro Yamada
· 9 years ago
48264d9
clk: uniphier: add Media I/O clock driver for UniPhier SoCs
by Masahiro Yamada
· 9 years ago
eb04ab3
ARM: zynq: Do not select options if SPL is not enabled
by Michal Simek
· 9 years ago
0a61ee8
stm32: move stm32 specific code to mach-stm32
by Vikas Manocha
· 9 years ago
746f985
armv8: cavium: Add ThunderX 88xx board definition
by Sergey Temerkhanov
· 9 years ago
f46c255
Merge git://www.denx.de/git/u-boot-marvell
by Tom Rini
· 9 years ago
b322c83
arm: mvebu: Consolidate board Kconfig options into one file
by Stefan Roese
· 9 years ago
0299c90
arm: mvebu: Add SolidRun ClearFog Armada 38x initial support
by Stefan Roese
· 9 years ago
e3b9c98
net: mvneta: Convert to driver model
by Stefan Roese
· 9 years ago
09a54c0
arm: mvebu: Add SPI driver model support
by Stefan Roese
· 9 years ago
6451223
arm: mvebu: Add DM and OF_CONTROL support to SPL
by Stefan Roese
· 9 years ago
47c0d79
arm: mvebu: Select SPL_DM_SEQ_ALIAS
by Nathan Rossi
· 9 years ago
211d57a
sunxi: Select DM_KEYBOARD
by Hans de Goede
· 9 years ago
6656241
stm32: Convert serial driver to DM
by Kamil Lulko
· 9 years ago
6edf6a2
sunxi: select SYS_NS16550 from Kconfig
by Hans de Goede
· 9 years ago
d9ae52c
zynq: sdhci: Move driver to DM
by Michal Simek
· 9 years ago
6889ca7
net: gem: Move driver to DM
by Michal Simek
· 9 years ago
1670c8c
Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriq
by Tom Rini
· 9 years ago
02b5d2e
armv8/ls1043aqds: add LS1043AQDS board support
by Shaohui Xie
· 9 years ago
4493721
armv8: LS2080A: Rename LS2085A to reflect LS2080A
by Prabhakar Kushwaha
· 9 years ago
225f5ee
arm: s5pc1xx: move SoC to mach-s5pc1xx
by Minkyu Kang
· 9 years ago
1fa4bfd
dm: cros_ec: Convert cros_ec keyboard driver to driver model
by Simon Glass
· 9 years ago
62e9207
arm: support Thumb-1 with CONFIG_SYS_THUMB_BUILD
by Albert ARIBAUD
· 9 years ago
42800ff
arm: zynq: Move serial driver to driver model
by Simon Glass
· 9 years ago
c2490bf
ARM: zynqmp: Enable DM and OF binding
by Michal Simek
· 9 years ago
71556fb
dm: arm: zynq: Enable device tree control in SPL
by Simon Glass
· 9 years ago
831c068
armv8/ls1043a: Enable secondary cores
by Hou Zhiqiang
· 9 years ago
3ad4472
armv8/ls1043ardb: Add nand boot support
by Gong Qianyu
· 9 years ago
f3a8e2b
armv8/ls1043ardb: Add LS1043ARDB board support
by Mingkai Hu
· 9 years ago
e8d124f
Merge git://git.denx.de/u-boot-marvell
by Tom Rini
· 9 years ago
1d51ea1
arm: mvebu: Enable DM_SERIAL on AXP / A38x boards
by Stefan Roese
· 9 years ago
9cffb23
arm: mvebu: Add DM (driver model) support
by Stefan Roese
· 9 years ago
6d0bdfd
sunxi: Switch to using malloc_simple for the spl
by Hans de Goede
· 9 years ago
ff42d10
sunxi: Enable CONFIG_SPL_STACK_R
by Hans de Goede
· 9 years ago
c3d8914
arm: mvebu: Move Armada XP/38x Kconfig to mach specific Kconfig file
by Stefan Roese
· 9 years ago
fc04b92
vexpress64: fvp dram: add DRAM configuration
by Ryan Harkin
· 9 years ago
931a1d2
vf610: add support for Phytec PCM052
by Albert ARIBAUD \(3ADEV\)
· 9 years ago
9c71bcd
ARM: hikey: hi6220: Migrate over to DM_SERIAL and use UART3 by default.
by Peter Griffin
· 9 years ago
efd7b60
ARM: hikey: Select DM, DM_GPIO from Kconfig
by Peter Griffin
· 9 years ago
1a8150d
imx: mx7dsabresd: Add support for MX7D SABRESD board
by Adrian Alonso
· 9 years ago
9d1b298
board: Add Toby-Churchill SL50 board support.
by Enric Balletbò i Serra
· 9 years ago
b9599dd
arm: Remove tx25 board
by Simon Glass
· 9 years ago
ad4f54e
arm: Remove palmtreo680 board
by Simon Glass
· 9 years ago
1c87dd7
arm: Remove xaeniax board
by Simon Glass
· 9 years ago
452ef83
arm: Remove vpac270_nor_128 board
by Simon Glass
· 9 years ago
bee2b99
arm: Remove vision2 board
by Simon Glass
· 9 years ago
Next »