- a4c79b3 arm: atmel: sama5d3: fix typo error for CONFIG_ENV_IS_NOWHERE by Bo Shen · 11 years ago
- 5471c4a arm: sama5d3: remove unused define by Bo Shen · 11 years ago
- b2d96dc ARM: at91: atmel_nand: pmecc driver will select the galois table by sector size by Wu, Josh · 11 years ago
- ce76f0a arm: atmel: add nand trimffs subcommand for at91sam9n12 and at91sam9x5 by Bo Shen · 11 years ago
- e08d6f3 arm: atmel: add gmac support for sama5d3xek board by Bo Shen · 11 years ago
- 9ed887c Merge branch 'u-boot-imx/master' into 'u-boot-arm/master' by Albert ARIBAUD · 11 years ago
- 425faf7 Add TI816X evm board support by TENART Antoine · 11 years ago
- 03efcb0 arm, da850: add ipam390 board support by Heiko Schocher · 11 years ago
- a1665ed TI:armv7: Enable CONFIG_CMD_GPIO by Tom Rini · 11 years ago
- 0fedc4a TI:armv7: Enable CONFIG_CMD_SPI by Tom Rini · 11 years ago
- a801757 TI:omap5/dra7xx: Convert to ti_armv7_common.h by Tom Rini · 11 years ago
- 8769455 TI:am33xx: Create common config files for TI ARMv7 platforms, and AM33xx by Tom Rini · 11 years ago
- bc6fff9 am335x_evm: Bring in 'boot_fdt' logic from i.MX by Tom Rini · 11 years ago
- 4db4076 am335x_evm: Use default baud rate table by Tom Rini · 11 years ago
- 73feefd am33xx: Stop using PHYS_DRAM_1 define by Tom Rini · 11 years ago
- dd5729a am33xx: CONFIG_DMA_COHERENT defines are unused, remove by Tom Rini · 11 years ago
- a2fa28b OMAP3: igep00x0: allow booting with a FDT from MMC by Javier Martinez Canillas · 11 years ago
- 2be6bed ARM: igep00x0.h: Enable the use of CMD_EXT4, CMD_FS_GENERIC and zImage. by Enric Balletbo i Serra · 11 years ago
- 5c119cb ARM: IGEP0033: Remove duplicate / unused #defines. by Enric Balletbo i Serra · 11 years ago
- cf8d005 ARM: IGEP0033: Add support to boot from NAND. by Enric Balletbo i Serra · 11 years ago
- 2e6bc67 ARM: IGEP0033: Add support for Flattened Device Tree. by Enric Balletbò i Serra · 11 years ago
- d69cc4a ARM: IGEP0033: Remove undef of CONFIG_CMD_MEMTEST by Enric Balletbo i Serra · 11 years ago
- 8d0afcd ARM: AM43xx: Add config file by Lokesh Vutla · 11 years ago
- 806d279 ARM: OMAP: Add CONFIG_OMAP_COMMON by Lokesh Vutla · 11 years ago
- 326ea98 Merge git://git.denx.de/u-boot-arm by Stefano Babic · 11 years ago
- fdce7b6 gpio: omap5-uevm: Configure the tca6424 gpio expander by Dan Murphy · 11 years ago
- 8c6ede1 am335x_evm: Add support for eMMC environment by Justin Waters · 11 years ago
- a3aa70a am335x_evm: Rework bootcmd to handle two MMC devs by Justin Waters · 11 years ago
- 2c7c03b am335x_evm: Add command line editing by Justin Waters · 11 years ago
- 317fab2 am335x_evm: Make NAND support modular by Justin Waters · 11 years ago
- c5c7a7c am335x_evm: Add support to boot from NOR. by Steve Kipisz · 11 years ago
- cd8845d am335x_evm: Add support for the NOR module on the memory cape by Steve Kipisz · 11 years ago
- 6454028 am335x_evm: Update SPI_BOOT support, add MTDPARTS info by Tom Rini · 11 years ago
- 989bd7a am335x_evm: Drop useless CONFIG_ENV_IS_NOWHERE by Tom Rini · 11 years ago
- 58cc978 mx6qsabresd: Add splash screen support via HDMI by Pardeep Kumar Singla · 11 years ago
- 5ea7f0e mx6: Factor out common HDMI setup code by Pardeep Kumar Singla · 11 years ago
- ea70690 omap3_beagle: support booting from zImage and device tree as last option by Nishanth Menon · 11 years ago
- 2ade496 omap3_beagle: support findfdt and loadfdt for devicetree support by Nishanth Menon · 11 years ago
- 102ce9e omap3_beagle: enable CMD_FS_GENERIC and simplify load of image/ramdisk by Nishanth Menon · 11 years ago
- a33e3c7 omap3_beagle: replace uImage.beagle with generic uImage by Nishanth Menon · 11 years ago
- 664979a omap3_beagle: remove JFFS2 support. by Nishanth Menon · 11 years ago
- c9be62c ARM: DRA7xx: Enable CPSW Ethernet support by Mugunthan V N · 11 years ago
- a7d39af am335x_evm: Correct CONFIG_CMD_SPL_WRITE_SIZE by Tom Rini · 11 years ago
- 3afd8e0 am335x_evm: Update eMMC falcon mode locations by Tom Rini · 11 years ago
- d789599 am335x_evm: Correct DFU ALT settings for falcon mode by Tom Rini · 11 years ago
- f8b1e86 mx6qsabrelite: Remove mx6qsabrelite code in favor of nitrogen6x by Fabio Estevam · 11 years ago
- 8b485ba Merge branch 'u-boot/master' into u-boot-arm/master by Albert ARIBAUD · 11 years ago
- aaf5e82 Merge branch 'master' of git://git.denx.de/u-boot-nds32 by Tom Rini · 11 years ago
- 0b17998 qemu-malta: Update for SPDX license identifiers by Tom Rini · 11 years ago
- 230187c Merge branch 'master' of git://git.denx.de/u-boot-mips by Tom Rini · 11 years ago
- 76116f2 highbank: enable keyed autoboot stop by Rob Herring · 11 years ago
- 76c3999 ARM: highbank: setup peripherals based on power domain status by Rob Herring · 11 years ago
- e1df283 ARM: highbank: enable reset on command timeout by Rob Herring · 11 years ago
- 185a5bb ARM: highbank: update config options by Rob Herring · 11 years ago
- f195749 MIPS: qemu-malta: bring up ethernet by Gabor Juhos · 11 years ago
- feaa606 MIPS: qemu-malta: add PCI support by Gabor Juhos · 11 years ago
- 52caee0 MIPS: qemu-malta: enable flash support by Gabor Juhos · 11 years ago
- 5a4dcfa MIPS: qemu-malta: add support for emulated MIPS Malta board by Gabor Juhos · 11 years ago
- c2120fb Merge branch 'master' of git://git.denx.de/u-boot-i2c by Tom Rini · 11 years ago
- 1a45966 Add GPL-2.0+ SPDX-License-Identifier to source files by Wolfgang Denk · 11 years ago
- d727ab3 wandboard: Use splash image at screen center by default by Otavio Salvador · 11 years ago
- 5434caf ARM: mxs: Consolidate configuration options by Marek Vasut · 11 years ago
- e3c58b0 nds32: Enable the function of passing parameters to Linux by ken kuo · 11 years ago
- 61ccf08 nds32: Enable SDIO and EXT2 command support for Andes board by ken kuo · 11 years ago
- 3c01670 nds32: Enable two banks of SDRAM on Andes board by ken kuo · 11 years ago
- 1221b3d vf610: Add I2C support for Vybrid VF610 platform by Alison Wang · 11 years ago
- 67bfae3 arm/km: fix u-boot update functionality by Holger Brunck · 12 years ago
- 880540d i2c, ppc4xx_i2c: switch to new multibus/multiadapter support by Dirk Eibach · 12 years ago
- 1f2ba72 tegra: i2c: Enable new CONFIG_SYS_I2C framework by Simon Glass · 12 years ago
- f3e9361 i2c, multibus, keymile: get rid of EEprom_ivm envvariable by Heiko Schocher · 12 years ago
- 00f792e i2c, fsl_i2c: switch to new multibus/multiadapter support by Heiko Schocher · 12 years ago
- ea818db i2c, soft-i2c: switch to new multibus/multiadapter support by Heiko Schocher · 12 years ago
- 4ef400b arm:trats:fix: Correction of loaddtb environment variable. by Łukasz Majewski · 11 years ago
- b9944a7 mpc85xx: Add gdsys ControlCenter Digital board by Dirk Eibach · 11 years ago
- 54e458d Revert "MIPS: Jz4740: Add qi_lb60 board support" by Tom Rini · 11 years ago
- fbbbc86 Merge branch 'master' of git://git.denx.de/u-boot-arm by Tom Rini · 11 years ago
- efc284e Merge branch 'u-boot-imx/master' into 'u-boot-arm/master' by Albert ARIBAUD · 11 years ago
- a3f170c mx53ard: Change default environment to cope with OE changes by Otavio Salvador · 11 years ago
- e97721c mx51evk: Change default environment to cope with OE changes by Otavio Salvador · 11 years ago
- 86812c4 wandboard: Change default environment to cope with OE changes by Otavio Salvador · 11 years ago
- 94aeb8a mx6slevk: Change default environment to cope with OE changes by Otavio Salvador · 11 years ago
- 2169228 mx6qsabrelite: Change default environment to cope with OE changes by Otavio Salvador · 11 years ago
- 254fd8d mx53loco: Change default environment to cope with OE changes by Otavio Salvador · 11 years ago
- 32cc24d m28evk: add trimffs to nand command by Marek Vasut · 11 years ago
- d035fcf ARM: tegra: enable LCD panel on Ventana by Stephen Warren · 11 years ago
- b46694d ARM: tegra: enable LCD panel on Harmony by Stephen Warren · 11 years ago
- d6cf707 Tegra: Config: Enable Tegra30/Tegra114 USB function by Jim Lin · 11 years ago
- 630aacb Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master' by Albert ARIBAUD · 11 years ago
- 9199fce arm:trats: Increase malloc pool size (for DFU ext4 transfers) by Łukasz Majewski · 11 years ago
- 643be9c EXYNOS: Move files from board/samsung to arch/arm by Rajeshwari Shinde · 11 years ago
- 198a40b EXYNOS4210: Configure GPIO for uart by Rajeshwari Shinde · 11 years ago
- 6e50e5c EXYNOS: LDS file move to common by Rajeshwari Shinde · 11 years ago
- 3275989 omap: cm_t35: Fix cm_t35 for weak splash_screen_prepare by Robert Winkler · 11 years ago
- e6c7f86 Merge branch 'u-boot-imx/master' into 'u-boot-arm/master' by Albert ARIBAUD · 11 years ago
- d6c6d12 vf610twr: Remove SoC name from U-Boot prompt by Otavio Salvador · 11 years ago
- ca21f61 vf610twr: Add default environment in line with other Freescale boards by Otavio Salvador · 11 years ago
- 20cb5fb am335x_evm: Add missing ';' in findfdt by Tom Rini · 11 years ago
- 262326b imx: nitrogen6x: Enable filesystem generic commands by Robert Winkler · 11 years ago
- 3655829 imx: nitrogen6x: Enable raw initrd by Robert Winkler · 11 years ago
- 9b9ba6f imx: nitrogen6x: Enable bootz by Robert Winkler · 11 years ago