Gitiles
Code Review Sign In
gerrit.devboardsforandroid.linaro.org / platform / external / u-boot / abab912813169e9f24e12b9a0a993b0c6060c808 / arch
  1. abab912 x86: mpspec: Allow platform to determine how PIRQ is connected to I/O APIC by Bin Meng · 9 years ago
  2. a277194 x86: Convert to use driver model pci on queensbay/crownbay by Bin Meng · 9 years ago
  3. 6fc0e8a x86: pci: Do not assign irq 0 to pci device by Bin Meng · 9 years ago
  4. 31a2dc6 x86: pci: Assign pci irqs to all functions by Bin Meng · 9 years ago
  5. 93f8a31 x86: Enable DM RTC support for all x86 boards by Bin Meng · 9 years ago
  6. 8ba25ee x86: Change pci option rom area MTRR setting to cacheable by Bin Meng · 9 years ago
  7. 3ccd49c x86: Simplify architecture defined exception handling in irq_llsr() by Bin Meng · 9 years ago
  8. 013cf48 x86: Display correct CS/EIP/EFLAGS when there is an error code by Bin Meng · 9 years ago
  9. 66d10c1 Merge branch 'zynq' of git://www.denx.de/git/u-boot-microblaze by Tom Rini · 9 years ago
  10. 6fe6f13 ARM: zynqmp: Wire up SATA for the board by Michal Simek · 9 years ago
  11. cb7ea82 ARM: zynqmp: Wire up ethernet controllers by Michal Simek · 9 years ago
  12. 6d6e3db ARM: zynq: Add support for zc770-xm011 by Michal Simek · 9 years ago
  13. 5c45b16 ARM: zynq: DT: Update zc770 dtses by Michal Simek · 9 years ago
  14. 91f9f17 ARM: zynq: DT: Add zc702 pushbuttons to DT as gpio-keys by Michal Simek · 9 years ago
  15. d50cb3d ARM: zynq: DT: Add missing interrupt for L2 pl310 by Michal Simek · 9 years ago
  16. b4e9eaf ARM: zynq: DT: Get rid of ps-clk-frequency by Michal Simek · 9 years ago
  17. 05e7ca6 ARM: zynq: DT: Update years in copyright by Michal Simek · 9 years ago
  18. 999667c ARM: zynq: DT: Sync zc702/zc706/zed/zybo DT with kernel by Michal Simek · 9 years ago
  19. 461c388 ARM: zynq: DT: Add reference to bus node by Michal Simek · 9 years ago
  20. e913ce2 ARM: zynq: DT: Add pinctrl node by Michal Simek · 9 years ago
  21. 5ee236a ARM: zynq: DT: Cleanup address-cells and size-cells by Michal Simek · 9 years ago
  22. b346bd1 ARM: zynq: DT: Clean up timer device tree nodes by Michal Simek · 9 years ago
  23. 7e16336 ARM: zynq: DT: Use the zynq binding with macb by Michal Simek · 9 years ago
  24. 08305fe ARM: zynq: DT: Fix GEM register area size by Michal Simek · 9 years ago
  25. 40b383f spi: Fix zynq SPI binding by Michal Simek · 9 years ago
  26. 3ffcdc7 ARM: zynq: DT: Remove 222 MHz OPP by Michal Simek · 9 years ago
  27. 8a8c46a ARM: zynq: DT: Migrate UART to Cadence binding by Michal Simek · 9 years ago
  28. bece06c ARM: zynq: DT: Add a fixed regulator for CPU voltage by Michal Simek · 9 years ago
  29. fb1a506 ARM: zynq: DT: Add missing nodes to DTSI by Michal Simek · 9 years ago
  30. a0cb47f ARM: zynq: DT: Use the right names for nodes by Michal Simek · 9 years ago
  31. 225bf9a zynqmp: Add support for IP detection via SLCR by Michal Simek · 9 years ago
  32. fb10116 zynqmp: mp: Simplify set_r5_start handling by Michal Simek · 9 years ago
  33. 0b54a9d zynqmp: Define ep config for ZynqMP by Siva Durga Prasad Paladugu · 9 years ago
  34. 7558000 zynqmp: Kconfig: Move zynqmp Kconfig by Siva Durga Prasad Paladugu · 9 years ago
  35. fffde77 stm32f4: add cpu clock option for 180 MHz by Antonio Borneo · 9 years ago
  36. 089fddf stm32f429: pass the device unique ID in DTB by Antonio Borneo · 9 years ago
  37. b0c8f4a Kill unneeded #include <linux/kconfig.h> by Masahiro Yamada · 9 years ago
  38. bafa6f5 am33xx: Unused get_board_rev function removal by Paul Kocialkowski · 9 years ago
  39. fb9006c omap3: CONFIG_REVISION_TAG ifdef check for get_board_rev by Paul Kocialkowski · 9 years ago
  40. d1a04b3 omap5: Definitions for SYS_BOOT-based fallback boot device selection by Paul Kocialkowski · 9 years ago
  41. 94fc751 omap4: Definitions for SYS_BOOT-based fallback boot device selection by Paul Kocialkowski · 9 years ago
  42. cfac375 omap3: Definitions for SYS_BOOT-based fallback boot device selection by Paul Kocialkowski · 9 years ago
  43. ed19bda omap-common: SYS_BOOT-based fallback boot device selection for peripheral boot by Paul Kocialkowski · 9 years ago
  44. df84477 omap-common: Boot device define instead of hardcoded value by Paul Kocialkowski · 9 years ago
  45. 62c5674 omap: SPL boot devices cleanup and completion by Paul Kocialkowski · 9 years ago
  46. 60c7c30 omap-common: Common boot code OMAP3 support and cleanup by Paul Kocialkowski · 9 years ago
  47. a350c6a kbuild: create symbolic link only for ARM, AVR32, SPARC, PowerPC, x86 by Masahiro Yamada · 9 years ago
  48. 17c5bda keystone2: add wfi in to the core_spin loop by Vitaly Andrianov · 9 years ago
  49. 2647394 Merge branch 'master' of http://git.denx.de/u-boot-sunxi by Tom Rini · 9 years ago
  50. a51c832 sunxi: ga10h: Enable both otg and regular usb host controllers by Hans de Goede · 9 years ago
  51. 9ecce97 sunxi: musb: Stop treating not having a vbus-det gpio as an error by Hans de Goede · 9 years ago
  52. 91183ba sunxi: musb: Use device-model for musb host mode by Hans de Goede · 9 years ago
  53. d42faf3 sunxi: musb: Move musb config and platdata to the sunxi-musb glue by Hans de Goede · 9 years ago
  54. 48c06c9 sunxi: usb-phy: Add support for reading otg id pin value by Hans de Goede · 9 years ago
  55. de1502c sunxi: Enable CMD_USB and USB_STORAGE by default on sunxi by Hans de Goede · 9 years ago
  56. 4536882 sunxi: Update selects in arch/arm/Kconfig for DM conversions by Tom Rini · 9 years ago
  57. d08980d sunxi: Remove bogus uart entry from utoo-p66 dts file by Hans de Goede · 9 years ago
  58. 6f4e050 Merge git://git.denx.de/u-boot-usb by Tom Rini · 9 years ago
  59. a151403 sunxi: spl: Detect at runtime where SPL was read from by Daniel Kochmański · 9 years ago
  60. 645c48f sunxi: Create helper function veryfing valid boot signature on MMC by Daniel Kochmański · 9 years ago
  61. 8ed43b9 arm: mvebu: Add SPL SDIO/MMC boot support by Stefan Roese · 9 years ago
  62. 413978d Merge git://git.denx.de/u-boot-uniphier by Tom Rini · 9 years ago
  63. f1d7945 ARM: dts: UniPhier: add I2C ch4 device node for PH1-sLD3 by Masahiro Yamada · 9 years ago
  64. 3365b4e ARM: UniPhier: add PH1-sLD3 SoC support by Masahiro Yamada · 9 years ago
  65. 6b71e6d ARM: dts: UniPhier: add device-specific compatible string for EEPROM by Masahiro Yamada · 9 years ago
  66. 3c9cc70 Merge git://git.denx.de/u-boot-marvell by Tom Rini · 9 years ago
  67. ad6ac7a arm: mvebu: a38x: Use correct PEX register access macros by Stefan Roese · 9 years ago
  68. ff9112d arm: mvebu: drivers/ddr: Move Armada XP DDR init code into new directory by Stefan Roese · 10 years ago
  69. edb4702 arm: mvebu: Add Armada 38x SERDES / PHY init code from Marvell bin_hdr by Stefan Roese · 9 years ago
  70. 29b103c arm: mvebu: serdes: Move Armada XP SERDES / PHY init code into new directory by Stefan Roese · 9 years ago
  71. 9f62b44 arm: mvebu: Disable MMU before changing register base address by Stefan Roese · 9 years ago
  72. e3cccf9 arm: mvebu: spl.c: Add call to board_early_init_f() by Stefan Roese · 9 years ago
  73. 2142770 arm: mvebu: Use default reg base address for SPL on A38x by Stefan Roese · 9 years ago
  74. ade741b arm: mvebu: Call timer_init early before PHY and DDR init by Stefan Roese · 9 years ago
  75. e863f7f arm: mvebu: add Armada XP SATA support by Anton Schubert · 9 years ago
  76. 5f7e310 x86: delete unneeded declarations of disable_irq() and enable_irq() by Masahiro Yamada · 9 years ago
  77. 854cbd2 usb: gadget: bcm_udc_otg files by Jiandong Zheng · 9 years ago
  78. 17da3c0 usb: Fastboot function config for better consistency with other functions by Paul Kocialkowski · 9 years ago
  79. 909a1ab include: usb: Move USB controller base address mapping by Nikhil Badola · 9 years ago
  80. d09e401 arch: arm: fsl: Add XHCI support for LS1021A by Ramneek Mehresh · 9 years ago
  81. 0503e82 dm: test: Add a size to each reg property by Simon Glass · 9 years ago
  82. 04035fd dm: test: Add a test for the system controller uclass by Simon Glass · 9 years ago
  83. 3c43fba dm: test: Add a test for the LED uclass by Simon Glass · 9 years ago
  84. 8e6cc46 dm: test: Add a test for the mmc uclass by Simon Glass · 9 years ago
  85. 64ce0ca dm: test: Add a test for the ram uclass by Simon Glass · 9 years ago
  86. 5010d98 sandbox: Use the reset driver to handle reset by Simon Glass · 9 years ago
  87. dc6f4d3 sandbox: Support multiple reset types by Simon Glass · 9 years ago
  88. 6a1c7ce dm: test: Add tests for the clk uclass by Simon Glass · 9 years ago
  89. 30db918 zynq: Rename struct clk_ops to zynq_clk_ops by Simon Glass · 9 years ago
  90. 4eae498 dm: arm: Put driver model I2C drivers before legacy ones by Simon Glass · 9 years ago
  91. fa78e0a dm: Reduce SPL device tree size by Simon Glass · 9 years ago
  92. db14f11 armv8/fsl-lsch3: Fix TCR_EL3 for the final MMU setup. by Zhichun Hua · 9 years ago
  93. 21a257b armv8: Fix TCR macros for shareability attribute by Zhichun Hua · 9 years ago
  94. e71a980 armv8/ls2085aqds: DSPI pin muxing configure through QIXIS by Haikun Wang · 9 years ago
  95. b0e209d armv8/ls2085a: Enable DSPI get input clk form 'mxc_get_clock' by Haikun Wang · 9 years ago
  96. 193e7e5 arm/dts/ls2085a: Add dts files for LS2085AQDS and LS2085ARDB by Haikun Wang · 9 years ago
  97. fe69a0e arm/dts/ls2085a: Add DSPI dts node by Haikun Wang · 9 years ago
  98. d941f71 arm/dts/ls2085a: Bring in ls2085a dts files from linux kernel by Haikun Wang · 9 years ago
  99. 88c857d arm/ls102xa: Add little-endian mode support for audio IPs by Alison Wang · 9 years ago
  100. 340848b arm/ls102xa: Add PSCI support for ls102xa by Wang Dongsheng · 9 years ago