- cbda080 imx: imx8mn-beacon: enable pinctrl_wdog in SPL by Peng Fan · 2 years, 6 months ago
- 6692cd9 imx: imx8mm/n/p-venice: enable pinctrl_wdog in SPL by Peng Fan · 2 years, 6 months ago
- 2d7f40c imx: imx8mm-cl-iot-gate: enable pinctrl_wdog in SPL by Peng Fan · 2 years, 6 months ago
- ee106ed imx: imx8mm_beacon: enable pinctrl_wdog in SPL by Peng Fan · 2 years, 6 months ago
- 3e48d37 arm: dts: Add support for AM62-SK by Nishanth Menon · 2 years, 6 months ago
- 900349b board: ti: Introduce the basic files to support AM62 SK board by Suman Anna · 2 years, 6 months ago
- 1b2f469 arm: dts: Introduce base AM62 SoC dtsi files by Suman Anna · 2 years, 6 months ago
- 4b8903a arm: mach-k3: am62: Introduce autogenerated SoC data by Suman Anna · 2 years, 6 months ago
- d98e860 arm: mach-k3: Introduce the basic files to support AM62 by Suman Anna · 2 years, 6 months ago
- 36dafd8 arm: mach-k3: am6_init: Fix the path and value's length in the fixup performed for usb boot by Aswath Govindraju · 2 years, 7 months ago
- 750d847 arm: dts: k3-am654-r5-base-board: Fix the dt properties in usb0 instance by Aswath Govindraju · 2 years, 7 months ago
- f8209d3 arm: bcmbca: introduce the bcmbca architecture and 47622 SOC by William Zhang · 2 years, 7 months ago
- 09d14d7 arm: k3: sysfw-loader: add hyperflash support by Vaishnav Achath · 2 years, 7 months ago
- 8fceb0e arm: dts: k3-j721e-common-proc-board: enable hyperflash mux sel GPIO by Vaishnav Achath · 2 years, 7 months ago
- fa4f5aa arm: dts: k3-j721e-common-proc-board-u-boot: enable HyperFlash in SPL by Vaishnav Achath · 2 years, 7 months ago
- 3042649 arm: dts: k3-j721e-r5-common-proc-board: Add HyperFlash node by Vaishnav Achath · 2 years, 7 months ago
- cbd7790 arm: dts: k3-j721e-som-p0: Add HyperFlash node by Vaishnav Achath · 2 years, 7 months ago
- 297daac arm: dts: k3-j721e-mcu-wakeup: Add HyperBus Controller node by Vaishnav Achath · 2 years, 7 months ago
- 3f51ba9 test: Load mac address using misc device by Sean Anderson · 2 years, 7 months ago
- d3f7287 test: Load mac address using RTC by Sean Anderson · 2 years, 7 months ago
- 472caa6 test: Load mac address with i2c eeprom by Sean Anderson · 2 years, 7 months ago
- e844e5d sandbox: Move some mac addresses to device tree by Sean Anderson · 2 years, 7 months ago
- 416e09b sandbox: net: Remove fake-host-hwaddr by Sean Anderson · 2 years, 7 months ago
- bedb182 sandbox: net: Add aliases for ethernet devices by Sean Anderson · 2 years, 7 months ago
- b62450c serial: Replace CONFIG_DEBUG_UART_BASE by CONFIG_VAL(DEBUG_UART_BASE) by Pali Rohár · 2 years, 6 months ago
- bfbd62f arm: mvebu: Use MVEBU_SPL_BOOT_DEVICE instead of SPL_BOOT_DEVICE by Chris Packham · 2 years, 6 months ago
- dc22afb spl: Remove CONFIG_SPL_START_S_PATH and rework the logic behind it by Tom Rini · 2 years, 6 months ago
- f113d7d Convert CONFIG_SPL_STACK to Kconfig by Tom Rini · 2 years, 6 months ago
- eaf6ea6 Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h by Tom Rini · 2 years, 6 months ago
- 4c97c8c powerpc: Switch to using CONFIG_SYS_INIT_SP_OFFSET from CONFIG_SYS_GBL_DATA_OFFSET by Tom Rini · 2 years, 6 months ago
- 931bad1 mpc85xx: Switch to setting the initial stack pointer more clearly by Tom Rini · 2 years, 6 months ago
- 3b2979e mvebu: Use CONFIG_SPL_STACK + 4 directly for bootparam location by Tom Rini · 2 years, 6 months ago
- 3135ba6 arm: pxa: Remove CONFIG_CPU_PXA25X by Tom Rini · 2 years, 6 months ago
- 1cb7d77 m68k: Remove dead code by Tom Rini · 2 years, 6 months ago
- 6074a53 ppc / layerscape: Clean up CONFIG_SYS_CCSR_DO_NOT_RELOCATE usage by Tom Rini · 2 years, 7 months ago
- ca8a329 Convert CONFIG_SPL_PAD_TO et al to Kconfig by Tom Rini · 2 years, 7 months ago
- b35316f Convert CONFIG_SPL_INIT_MINIMAL et al to Kconfig by Tom Rini · 2 years, 7 months ago
- a581eba spl: Remove CONFIG_SPL_BOARD_LOAD_IMAGE by Tom Rini · 2 years, 7 months ago
- 12f613c arm: omap2plus: Move CONFIG_SYS_PTV out of CONFIG namespace by Tom Rini · 2 years, 7 months ago
- 4230d68 imx: imx8mq: default select CLK_IMX8MQ by Peng Fan · 2 years, 6 months ago
- 2b64121 armv8: Fix TCR 64-bit writes by Andre Przywara · 2 years, 7 months ago
- 4fe629d Merge https://source.denx.de/u-boot/custodians/u-boot-riscv by Tom Rini · 2 years, 6 months ago
- e7356f0 arm: dts: k3-am642-*: Mark the memory node with u-boot, dm-spl by Georgi Vlaev · 2 years, 7 months ago
- d5af15b riscv: Clean up asm/io.h by Leo Yu-Chi Liang · 2 years, 7 months ago
- 8ac37b4 riscv: remove CONFIG_ARCH_MAP_SYSMEM from io.h by Michal Simek · 2 years, 7 months ago
- 661f540 Merge tag 'xilinx-for-v2022.07-rc4' of https://source.denx.de/u-boot/custodians/u-boot-microblaze by Tom Rini · 2 years, 6 months ago
- 7e0edca Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-sunxi by Tom Rini · 2 years, 6 months ago
- 594f692 xilinx: zynqmp: Wire tee for Multi DTB use cases by Michal Simek · 2 years, 7 months ago
- 821fdfb sunxi: Remove obsolete Kconfig selections by Samuel Holland · 2 years, 7 months ago
- e26ece2 sunxi: board: Fix UART PortF pinmux setup by Andre Przywara · 2 years, 7 months ago
- 1b05136 arm: socfpga: Add the terasic de10-standard board by Humberto Naves · 2 years, 7 months ago
- 2d25f63 arm: gic_v2: Skip gic_init_secure when cpu is not in el3 by Sai Pavan Boddu · 2 years, 7 months ago
- b898f6a powerpc: mpc85xx: Fix CONFIG_OF_SEPARATE support for NOR booting by Pali Rohár · 2 years, 7 months ago
- 004d30c Merge tag 'u-boot-imx-20220523' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx by Tom Rini · 2 years, 6 months ago
- 4d573d5 ARM: dts: imx: Add support for DH electronics i.MX8M Plus DHCOM and PDK2 by Marek Vasut · 2 years, 7 months ago
- d037e79 sunxi: F1C100s: update DT files from Linux by Andre Przywara · 2 years, 7 months ago
- ce00370 ARM: dts: sun50i: H6: Sync from Linux v5.18-rc1 by Samuel Holland · 2 years, 7 months ago
- 7710282 ARM: dts: sun50i: A64: Sync from Linux v5.18-rc1 by Samuel Holland · 2 years, 7 months ago
- 7024755 ARM: dts: sun8i: R40/T3: Sync from Linux v5.18-rc1 by Samuel Holland · 2 years, 7 months ago
- 94539ab ARM: dts: sun8i: V3/V3s/S3: Sync from Linux v5.18-rc1 by Samuel Holland · 2 years, 7 months ago
- 2c59785 ARM: dts: sunxi: H2+/H3/H5: Sync from Linux v5.18-rc1 by Samuel Holland · 2 years, 7 months ago
- 2d648e6 ARM: dts: sun8i: A83T: Sync from Linux v5.18-rc1 by Samuel Holland · 2 years, 7 months ago
- 6f97e02 ARM: dts: sun9i: Sync from Linux v5.18-rc1 by Samuel Holland · 2 years, 7 months ago
- 70f24fa ARM: dts: sunxi: A13/A31/A23/A33: Sync from Linux v5.18-rc1 by Samuel Holland · 2 years, 7 months ago
- 4746694 ARM: dts: sun4i: Sync from Linux v5.18-rc1 by Samuel Holland · 2 years, 7 months ago
- 0605ac4 ARM: dts: sun7i: Sync from Linux v5.18-rc1 by Samuel Holland · 2 years, 7 months ago
- 91407bb ARM: dts: sunxi: Remove unused devicetree headers by Samuel Holland · 2 years, 7 months ago
- c5a4694 ARM: dts: imx: Configure FEC for iMX6QDL DRC02 by Philip Oberfichtner · 2 years, 7 months ago
- 84d9ce5 ARM: dts: imx: Configure FEC for iMX6QDL picoITX by Philip Oberfichtner · 2 years, 7 months ago
- dcb59a1 ARM: dts: imx: Simplify fec node for iMX6QDL DHCOM boards by Philip Oberfichtner · 2 years, 7 months ago
- 874c768 ARM: dts: imx: Migrate iMX6QDL picoITX DTs from Linux by Philip Oberfichtner · 2 years, 7 months ago
- 45964cb ARM: dts: imx: Migrate iMX6QDL DRC02 DTs from Linux by Philip Oberfichtner · 2 years, 7 months ago
- e1e0d9a ARM: imx6: Fix broken DT path in DH board file by Philip Oberfichtner · 2 years, 7 months ago
- 55d1537 bosch: Add initial board support for ACC by Philip Oberfichtner · 2 years, 7 months ago
- 37a7c37 arm: mach-imx: cmd_nandbcb fix bad block handling by Michael Trimarchi · 2 years, 7 months ago
- cad7728 i.MX8ULP: add display_ele_fw_version api by Gaurav Jain · 2 years, 7 months ago
- cda8f87 caam: Fix crash in case caam_jr_probe failed by Ye Li · 2 years, 7 months ago
- a38ed61 imx: imx8mp_evk: enable pinctrl_wdog in SPL by Peng Fan · 2 years, 7 months ago
- ba06ea8 imx: imx8mm_evk: enable pinctrl_wdog in SPL by Peng Fan · 2 years, 7 months ago
- 6d5cc90 imx: imx8mn_evk: enable pinctrl_wdog in SPL by Peng Fan · 2 years, 7 months ago
- 597514e imx: imx8mq-phanbell: enable CONFIG_DM_SERIAL by Peng Fan · 2 years, 7 months ago
- 1d8c0c2 imx: imx8mq-pico: enable CONFIG_DM_SERIAL by Peng Fan · 2 years, 7 months ago
- 23df340 imx: imx8mq-cm: enable CONFIG_DM_SERIAL by Peng Fan · 2 years, 7 months ago
- 56f3888 imx: dts: move common changes to imx8mq-u-boot.dtsi by Peng Fan · 2 years, 7 months ago
- 0cba71c board: gateworks: gw_ventana: add support for GPY111 PHY by Tim Harvey · 2 years, 7 months ago
- a1d675a imx: imx8m: drop uneeded check by Peng Fan · 2 years, 7 months ago
- 5dd9db8 imx: imx8m: add rproc_att by Peng Fan · 2 years, 7 months ago
- 40153df imx: bootaux: get stack from elf file by Peng Fan · 2 years, 7 months ago
- fd60a87 imx: bootaux: add missing newline by Peng Fan · 2 years, 7 months ago
- 56c2dbd imx: bootaux: cleanup code by Peng Fan · 2 years, 7 months ago
- 290ffe5 imx8m: fix reading of DDR4 MR registers by Rasmus Villemoes · 2 years, 7 months ago
- c329f93 ARM: imx: imx31: Introduce and use UART_BASE_ADDR(n) by Marek Vasut · 2 years, 7 months ago
- be23774 ARM: imx: imx27: Introduce and use UART_BASE_ADDR(n) by Marek Vasut · 2 years, 7 months ago
- 52b6b48 ARM: imx: imx8m: Introduce and use UART_BASE_ADDR(n) by Marek Vasut · 2 years, 7 months ago
- ff04a09 ARM: dts: imx: Use 100 kHz I2C2 on Data Modul i.MX8M Mini eDM SBC by Marek Vasut · 2 years, 8 months ago
- d175982 imx8mn/8mp: Allow booting via USB by Fabio Estevam · 2 years, 8 months ago
- 0adf10a ARM: dts: stm32: Configure Buck3 voltage per PMIC NVM on Avenger96 by Marek Vasut · 2 years, 7 months ago
- 11ed38f arm64: zynqmp: Add DT description for si5328 for zcu102/zcu106 by Michal Simek · 2 years, 7 months ago
- d5b9b22 arm64: zynqmp: Add linux,code for fwuen button by Michal Simek · 2 years, 7 months ago
- e4f1d28 arm64: zynqmp: Add PHY description for SGMII on vck190 SC by Michal Simek · 2 years, 7 months ago