1. d193c1b Merge remote-tracking branch 'u-boot-imx/master' by Albert ARIBAUD · 12 years ago
  2. 5fb29f3 Merge branch 'ext4' by Tom Rini · 12 years ago
  3. 2ee03c6 ColdFire: Rename NANDFLASH_SIZE into CONFIG_NANDFLASH_SIZE for MCF537x by Alison Wang · 13 years ago
  4. 49b3962 Merge branch 'master' of git://git.denx.de/u-boot-mpc83xx by Tom Rini · 12 years ago
  5. db1fc7d mpc8308rdb: add support for eSDHC MMC controller by Ira W. Snyder · 12 years ago
  6. 40775e9 mpc8308rdb: add support for FIT images by Ira W. Snyder · 12 years ago
  7. ea1ea54 mpc8308rdb: add support for Spansion SPI flash on header J8 by Ira W. Snyder · 12 years ago
  8. b64b7c3 env: make "env default" selective, check and apply by Gerlando Falauto · 12 years ago
  9. 152874b env: check and apply changes on delete/destroy by Gerlando Falauto · 12 years ago
  10. c598359 env: add check/apply logic to himport_r() by Gerlando Falauto · 12 years ago
  11. 348b1f1 env: make himport_r() selective on variables by Gerlando Falauto · 12 years ago
  12. c3f6525 env: unify logic to check and apply changes by Gerlando Falauto · 12 years ago
  13. 535c74f ARM: Remove apollon board by Marek Vasut · 12 years ago
  14. c413a00 Merge branch 'master' of git://git.denx.de/u-boot-nand-flash by Tom Rini · 12 years ago
  15. 9c60e75 mxc nand: Homogenize IP revisions with Linux by Benoît Thébaudeau · 12 years ago
  16. 1884d65 mxc nand: Let driver detect IP revision by Benoît Thébaudeau · 12 years ago
  17. c1db8dd mxc nand: Access all ecc_status_result fields by Benoît Thébaudeau · 12 years ago
  18. 365b2c0 mxc nand: cosmectic: Light cleanup by Benoît Thébaudeau · 12 years ago
  19. 80c8ab7 mxc nand: Merge mtd and spl register definitions by Benoît Thébaudeau · 12 years ago
  20. 9c790a7 mtd: nand: allow NAND_NO_SUBPAGE_WRITE to be set from driver by Marek Vasut · 12 years ago
  21. e70bfa2 nand: Make NAND lock status compatible with Micron by Joe Hershberger · 12 years ago
  22. 33b1d5c nand: consolidate duplicated constants by Joe Hershberger · 12 years ago
  23. e331ab2 nand: Change ulong to loff_t and size_t by Joe Hershberger · 12 years ago
  24. eee623a nand: Add support for unlock.invert by Joe Hershberger · 12 years ago
  25. 037e9d3 Merge branch 'master' of git://git.denx.de/u-boot-i2c by Tom Rini · 12 years ago
  26. dc3e30b Atmel: sam9g10/9m10/9x5: Add support to boot DT kernel by Bo Shen · 12 years ago
  27. f994dc5 mx28evk: extend default environment by Otavio Salvador · 12 years ago
  28. fd8dca8 i2c:soft:multi: Enable soft I2C multibus at Trats development board by Łukasz Majewski · 12 years ago
  29. 7ca8f73 i2c:soft:multi: Support for multiple soft I2C buses at Samsung boards by Łukasz Majewski · 12 years ago
  30. 8f082d7 Merge branch 'master' of git://git.denx.de/u-boot-mips by Tom Rini · 12 years ago
  31. f71d5cd Merge branch 'master' of git://git.denx.de/u-boot-avr32 by Tom Rini · 12 years ago
  32. a420dfe avr32: add atngw100mkii board by Andreas Bießmann · 12 years ago
  33. a9ae14f Merge branch 'master' of git://www.denx.de/git/u-boot-mmc by Tom Rini · 12 years ago
  34. bcbb046 microblaze: timer: Prepare for device-tree initialization by Michal Simek · 12 years ago
  35. 7636ebe serial: Support serial multi for Microblaze by Michal Simek · 12 years ago
  36. 29f3e3f Tegra: Change Tegra20 to Tegra in common code, prep for T30 by Tom Warren · 12 years ago
  37. 3292539 MX35: mx35pdk: add support for MMC by Stefano Babic · 12 years ago
  38. b85705e ima3-mx53:Rename CONFIG_PRIME => CONFIG_ETHPRME, remove by Ashok Kumar Reddy · 12 years ago
  39. 573668a tegra: put eMMC environment into the boot sectors by Stephen Warren · 12 years ago
  40. 2915905 mmc: detect boot sectors using EXT_CSD_BOOT_MULT too by Stephen Warren · 12 years ago
  41. 0bc069b tegra: Enable NAND on TEC by Thierry Reding · 12 years ago
  42. 9614a1e tegra: enable NAND on Harmony by Stephen Warren · 12 years ago
  43. 0dd8408 tegra: Enable NAND on Seaboard by Simon Glass · 12 years ago
  44. 312693c tegra: nand: Add Tegra NAND driver by Jim Lin · 12 years ago
  45. b572595 nand: Try to align the default buffers by Simon Glass · 12 years ago
  46. 0dc7b82 mx31: Define default SoC input clock frequencies by Benoît Thébaudeau · 12 years ago
  47. 9c6c5c0 mx35: Define default SoC input clock frequencies by Benoît Thébaudeau · 12 years ago
  48. 1b2080f mx25: Define default SoC input clock frequencies by Benoît Thébaudeau · 12 years ago
  49. b09ed6e mmc: s5p_sdhci: add the set_mmc_clk for cmu control by Jaehoon Chung · 12 years ago
  50. 470dcc7 mmc: Add a SDHCI quirk for boards that have no CD by Joe Hershberger · 12 years ago
  51. 1c1ec3c tegra: put eMMC environment into the boot sectors by Stephen Warren · 12 years ago
  52. 8948ea8 mmc: detect boot sectors using EXT_CSD_BOOT_MULT too by Stephen Warren · 12 years ago
  53. 057df19 Merge remote-tracking branch 'u-boot-ti/master' into m by Albert ARIBAUD · 12 years ago
  54. 6298687 OMAP3: mt_ventoux: added video support by Stefano Babic · 12 years ago
  55. d0e9fb1 OMAP3: mt_ventoux: activate GPIO4 by Stefano Babic · 12 years ago
  56. 8103c6f OMAP3: tam3517: add function to read MAC from EEPROM by Stefano Babic · 12 years ago
  57. 6342fa0 Merge remote-tracking branch 'u-boot-atmel/master' into m by Albert ARIBAUD · 12 years ago
  58. 7d899c1 Fixes the crippled console output on PortuxG20. by Markus Hubig · 12 years ago
  59. 503e159 atmel: eb_cpux9k2: add ram target configuration by Jens Scharsig · 12 years ago
  60. e62b008 integrator: break out common config by Linus Walleij · 12 years ago
  61. d812f4a SCSPS1: Enable caches by Marek Vasut · 12 years ago
  62. 91dd7ca mx28evk: Add USB Ethernet support by Fabio Estevam · 12 years ago
  63. c16ecb0 M28: Fix the use of gpmi-nand in mtdparts by Marek Vasut · 12 years ago
  64. de6dc4e MX28: mx28evk: Enable SPI DMA by Otavio Salvador · 12 years ago
  65. fcca7e7 arm/km: remove unused code by Holger Brunck · 12 years ago
  66. 05c8e81 arm/km: fix frequency of the SPI NOR Flash by Valentin Longchamp · 12 years ago
  67. f46b4a1 km/arm: set SPI NOR Flash default parameters by Valentin Longchamp · 12 years ago
  68. 491f6c2 edminiv2: orion5x: fix GPIO inits and values by Albert ARIBAUD · 12 years ago
  69. de15a06 cfi: Make the flash erase and write operations abortable by Joe Hershberger · 12 years ago
  70. 67cbbf2 mmc: Remove unused item flags in struct mmc_cmd by Kaspter Ju · 12 years ago
  71. 7cdcaef Merge branch 'master' of git://git.denx.de/u-boot-usb by Wolfgang Denk · 12 years ago
  72. 98c397a pci: update pci_ids.h with a few new entries by Andrew Sharp · 12 years ago
  73. df95321 at91: 9x5: Enable PMECC for 5series ek board. by Wu, Josh · 12 years ago
  74. fe2185e at91: atmel_nand: extract HWECC initialization code into one function: atmel_hw_nand_init_param(). by Wu, Josh · 12 years ago
  75. 1d7442e atmel: at91sam9x5: add spi flash boot support by Bo Shen · 12 years ago
  76. 3083efe arm: sam9g10/sam9m10g45: remove CONFIG_ARCH_CPU_INIT by Bo Shen · 12 years ago
  77. 88461f1 at91sam9263ek: fix 'update' script by Andreas Bießmann · 12 years ago
  78. 9865b2e ARM : at91sam9x5 : Remove CONFIG_ARCH_CPU_INIT by Bo Shen · 12 years ago
  79. 749f818 usb: fix ulpi_set_vbus prototype by Lucas Stach · 12 years ago
  80. 93a1ab5 arm:trats: Enable g_dnl composite USB gadget with embedded DFU function on TRATS by Lukasz Majewski · 12 years ago
  81. f22b11c dfu: DFU backend implementation by Lukasz Majewski · 12 years ago
  82. 1d4a0b6 dfu:usb: Support for g_dnl composite download gadget. by Lukasz Majewski · 12 years ago
  83. 16e43f3 fsl_esdhc: Remove cache snooping for i.MX by Benoît Thébaudeau · 12 years ago
  84. 4ee80c6 efikamx: move and rename Efika MX directories and config files to prepare for new boards by Matt Sealey · 12 years ago
  85. 0375baf MX28: m28evk: Enable SPI DMA by Marek Vasut · 12 years ago
  86. 1d6d5f9 MX28: m28evk: Align SSP clock speed by Marek Vasut · 12 years ago
  87. 953884c imx27lite: update with gpio api change (v4) by trem · 12 years ago
  88. 5fecb36 MX: Set a common gpio.h for all i.MX by Stefano Babic · 12 years ago
  89. 685659c mx28evk: Remove unneeded 'undef' by Fabio Estevam · 12 years ago
  90. e229d44 MX28: Move "regs-base.h" include after SoC type configuration by Otavio Salvador · 12 years ago
  91. 0aff384 mx53evk: add boot_mode support by Troy Kisky · 12 years ago
  92. bb05b40 mx6qsabrelite: add boot_mode support by Troy Kisky · 12 years ago
  93. a51425d apx4devkit: Turn on caches by Fabio Estevam · 12 years ago
  94. a7273de m28evk: Turn on caches by Fabio Estevam · 12 years ago
  95. d0460b0 arm:cache:trats: Enable PL310 L2 Cache Controller at TRATS Samsung board by Łukasz Majewski · 12 years ago
  96. 5addfcf video: add dp_enabled variable in vidinfo structure by Donghwa Lee · 12 years ago
  97. 42e14f0 arm:trats: loaduimage environment variable defied for TRATS target by Łukasz Majewski · 12 years ago
  98. 41222c2 SMDK5250: Enable UART and MMC for Exynos5250 Rev 1.0 by Rajeshwari Shinde · 12 years ago
  99. 78fbcc9 SMDK5250: Add smdk5250-uboot-spl.lds by Rajeshwari Shinde · 12 years ago
  100. 3d6ba91 ARM: Remove unused stack and irq config defines by Rob Herring · 12 years ago