Gitiles
Code Review Sign In
gerrit.devboardsforandroid.linaro.org / platform / external / u-boot / bc323b3fa7cbf1008f02d342c0505231961b5fa6 / include / configs
  1. bc323b3 armv8: ls1043ardb: enable scsi command and pcie to sata converter by Po Liu · 8 years ago
  2. 7942550 armv8: ls1043ardb: invert irq pin polarity for AQR105 PHY by Shaohui Xie · 9 years ago
  3. 1297cdb armv8: ls1043a: copy kernel from QSPI when booting with QSPI enabled by Qianyu Gong · 9 years ago
  4. 7ad9cc9 armv8: ls2080a: update eth prime by Prabhakar Kushwaha · 9 years ago
  5. bcb55f6 armv8: ls2080: enable sec_init in U-Boot by Aneesh Bansal · 9 years ago
  6. 1cc0a9f Fix various typos, scattered over the code. by Robert P. J. Day · 9 years ago
  7. 4bf11dc omap4: duovero: Disable EFI booting by Ash Charles · 9 years ago
  8. ea94859 omap4: load files for legacy boot by Ash Charles · 9 years ago
  9. b38eaec include/configs: Numerous typo fixes: "controler" -> "controller". by Robert P. J. Day · 9 years ago
  10. e7fbcbc igep00x0: Use the SRAM available for SPL. by Enric Balletbo i Serra · 9 years ago
  11. 58abb98 mx6ul_evk: Remove CONFIG_SUPPORT_EMMC_BOOT by Fabio Estevam · 9 years ago
  12. f9f9d2d config: am335x_evm: detect BoneGreen using BBG1 by matwey.kornilov@gmail.com · 9 years ago
  13. 09c2b8f Change my mailaddress by Andreas Bießmann · 9 years ago
  14. f188357 Revert "ti_armv7_common.h: Fix U-Boot location on eMMC" by Tom Rini · 9 years ago
  15. 2489a7e omap3: Reduce logic/overo SPL max image size by Tom Rini · 9 years ago
  16. e25b369 ARM64: zynqmp: Cleanup config file after CMD move by Michal Simek · 9 years ago
  17. f4c6f93 Merge branch 'master' of git://git.denx.de/u-boot-samsung by Tom Rini · 9 years ago
  18. fc6e3c8 pico-imx6ul: Update the defconfig by Tom Rini · 9 years ago
  19. 305b909 ARM: hisilicon: hikey: Align memory node with upstream kernel by Peter Griffin · 9 years ago
  20. ef5ebe9 ti_armv7_common.h: Fix U-Boot location on eMMC by Semen Protsenko · 9 years ago
  21. 89cb2b5 configs: Re-sync with cmd/Kconfig by Tom Rini · 9 years ago
  22. cb04db1 include/configs: Whitespace fixup by Tom Rini · 9 years ago
  23. 78d1e1d configs: Re-sync almost all of cmd/Kconfig by Tom Rini · 9 years ago
  24. 4d7100a configs: Re-sync CONFIG_USB_MUSB_HOST by Tom Rini · 9 years ago
  25. adad96e configs: Re-sync HUSH options by Tom Rini · 9 years ago
  26. 9f69ab8 Merge branch 'master' of git://www.denx.de/git/u-boot-uniphier by Tom Rini · 9 years ago
  27. 588d269 Merge branch 'master' of git://www.denx.de/git/u-boot-imx by Tom Rini · 9 years ago
  28. b75e072 ARM: uniphier: speed up loading kernel image from NOR device by Masahiro Yamada · 9 years ago
  29. 2386969 ARM: uniphier: reserve the last 64 byte of SDRAM by Masahiro Yamada · 9 years ago
  30. 9d0c2ce ARM: uniphier: add PH1-LD20 SoC support by Masahiro Yamada · 9 years ago
  31. eb6b50f Merge branch 'master' of git://git.denx.de/u-boot-usb by Tom Rini · 9 years ago
  32. e6c0bc0 usb: gadget Move: CONFIG_G_DNL_* to Kconfig by Sam Protsenko · 9 years ago
  33. b142729 usb: dwc3: Move CONFIG_USB_DWC3_PHY_* to Kconfig by Sam Protsenko · 9 years ago
  34. c16bf62 usb: dwc3: Move CONFIG_USB_DWC3_OMAP to Kconfig by Sam Protsenko · 9 years ago
  35. 65403f3 usb: dwc3: Move CONFIG_USB_DWC3_GADGET/HOST to Kconfig by Sam Protsenko · 9 years ago
  36. aaa4a9e usb: gadget: Move CONFIG_USB_GADGET_DOWNLOAD to Kconfig by Sam Protsenko · 9 years ago
  37. 3457bba usb: gadget: Move CONFIG_USB_GADGET_DUALSPEED to Kconfig by Sam Protsenko · 9 years ago
  38. a59a77f usb: gadget: Move CONFIG_USB_GADGET_VBUS_DRAW to Kconfig by Sam Protsenko · 9 years ago
  39. 69cc7db Add initial support for Technexion's PICO-IMX6UL-EMMC board by Fabio Estevam · 9 years ago
  40. 54971ac board: ge: bx50v3: Use pwm for display backlight by Akshay Bhat · 9 years ago
  41. e1acaa6 bx50v3: Enable CONFIG_OF_LIBFDT in defconfig by Akshay Bhat · 9 years ago
  42. 3349ed3 Remove references to CONFIG_CMD_EXT3, no such command by Robert P. J. Day · 9 years ago
  43. 093685a dragonboard410c: Fix environment variables by Andreas Färber · 9 years ago
  44. c1f2057 configs: ks2: move CMD_NAND to defconfigs by Lokesh Vutla · 9 years ago
  45. 8f69523 memory: Move TI_AEMIF config to KCONFIG by Lokesh Vutla · 9 years ago
  46. 50c5d43 dragonboard410c: Add CONFIG_SYS_CACHELINE_SIZE by Mateusz Kulikowski · 9 years ago
  47. 23922e2 cmd: fdt: Use separate CMD_FDT Kconfig entry instead of OF_LIBFDT by Michal Simek · 9 years ago
  48. 5375389 kconfig: Move CONFIG_OF_LIBFDT to Kconfig by Michal Simek · 9 years ago
  49. 30b0195 bcm281xx: save ENV to MMC by Steve Rae · 9 years ago
  50. 108f841 ARM: rpi: fix 64-bit CONFIG_SYS_TEXT_BASE by Stephen Warren · 9 years ago
  51. 4ecad8a exynos: Set CNTFRQ by Alexander Graf · 9 years ago
  52. 541c9be Merge branch 'master' of git://www.denx.de/git/u-boot-microblaze by Tom Rini · 9 years ago
  53. 58ed7f6 ARM64: zynqmp: Use i2c cadence DM driver by Michal Simek · 9 years ago
  54. ff9bd8e ARM64: zynqmp: Enable pca953x driver for zcu102 by Michal Simek · 9 years ago
  55. 2978ae2 gpio: Kconfig: Enable Zynq GPIO driver using kconfig by Siva Durga Prasad Paladugu · 9 years ago
  56. 08afaf1 ARM64: zynqmp: Clean header after moving stuff to Kconfig by Michal Simek · 9 years ago
  57. 6c0c958 ARM64: zynqmp: Add support for zc1751 with DC cards by Michal Simek · 9 years ago
  58. 1f4f3d3 ARM64: zynqmp: Add support for ZCU102 platform by Michal Simek · 9 years ago
  59. 407b76f ARM64: zynqmp: Move kernel and fdt offsets and sizes to board config file by Siva Durga Prasad Paladugu · 9 years ago
  60. 1e8d383 ARM: zynq: Do not perform reset at the end of thor by Michal Simek · 9 years ago
  61. 758f29d ARM: zynq: Support systems with more memory banks by Michal Simek · 9 years ago
  62. c1584e2 ARM: zynq: Use memory initialization based on DTS file by Michal Simek · 9 years ago
  63. 371fc58 ARM: zynq: Extend microzed board support by Michal Simek · 9 years ago
  64. 8140132 Merge branch 'master' of git://www.denx.de/git/u-boot-imx by Tom Rini · 9 years ago
  65. 169a855 arm: mvebu: theadorable: Add PEX-switch detection and reset code by Stefan Roese · 9 years ago
  66. 8ac71da arm: mvebu: theadorable: Enable 2nd I2C controller by Stefan Roese · 9 years ago
  67. 28226b9 arm: mvebu: theadorable: Add bootcounter support by Stefan Roese · 9 years ago
  68. fe84ebf rpi: remove redundant board files by Stephen Warren · 9 years ago
  69. d22a765 ARM: add Raspberry Pi 3 64-bit config by Stephen Warren · 9 years ago
  70. 9dbdc6e Merge branch 'master' of git://git.denx.de/u-boot-socfpga by Tom Rini · 9 years ago
  71. 7e8f270 Merge branch 'master' of git://git.denx.de/u-boot-usb by Tom Rini · 9 years ago
  72. f6060ce arm: socfpga: Drop space after 'loadaddr=' in extra env by Marek Vasut · 9 years ago
  73. 723a72af arm: socfpga: migration of CONFIG_SPI_FLASH_BAR by Denis Bakhvalov · 9 years ago
  74. ac7eef7 board: pic32mzda: enable USB-host, USB-storage support. by Purna Chandra Mandal · 9 years ago
  75. e16e137 Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx by Tom Rini · 9 years ago
  76. b39d121 powerpc: Replace CONFIG_SYS_INIT_RAM_END with CONFIG_SYS_INIT_RAM_SIZE by York Sun · 9 years ago
  77. 4c1ceb6 powerpc: t1040qds: Use generic ethsw commands by Codrin Ciubotariu · 9 years ago
  78. 3c1d218 armv8: LS2080A: Consolidate LS2080A and LS2085A by York Sun · 9 years ago
  79. 2a55583 armv8: ls1043a: load Fman ucode from SD/MMC under SD boot by Qianyu Gong · 9 years ago
  80. fd1b147 armv8: ls1043a: load Fman ucode from NAND flash under NAND boot by Qianyu Gong · 9 years ago
  81. 1b245d9 armv8/ls1043aqds: modify CONFIG_SYS_MAX_FLASH_BANKS to 1 by Wenbin Song · 9 years ago
  82. 4ed6ed3 Merge branch 'master' of git://www.denx.de/git/u-boot-microblaze by Tom Rini · 9 years ago
  83. 07654ba ARM64: zynqmp: Enable EFI partition support by Michal Simek · 9 years ago
  84. 4d1ed9c ARM: zynq: Add uEnv.txt support by Michal Simek · 9 years ago
  85. 679b994 block: Add support for Ceva sata by Michal Simek · 9 years ago
  86. 8d59d7f ARM64: zynqmp: Read RAM information from DT by Michal Simek · 9 years ago
  87. a3afb4a ARM64: Move HUSH enabling from board file to defconfig by Michal Simek · 9 years ago
  88. 46f68e6 ARM64: zynqmp: Enable FAT write and EXT4 write for USB too by Michal Simek · 9 years ago
  89. 5cfd918 ARM64: zynqmp: Decrease boot delay by Soren Brinkmann · 9 years ago
  90. a359eaa microblaze: Remove !OF_CONTROL code for timer and interrupt by Michal Simek · 9 years ago
  91. 996503e ARM: zynq: zybo: Enabling reading MAC address from EEPROM by Michal Simek · 9 years ago
  92. b7b3efe ARM: zynq: Enable option to overwrite default variables by Michal Simek · 9 years ago
  93. 217185b zynq-common: Enable phy driver for Xilinx PCS/PMA core by Siva Durga Prasad Paladugu · 9 years ago
  94. 606576d arm: mvebu: Add basic support for Armada 375 eval board db-88f6720 by Stefan Roese · 9 years ago
  95. 6baa261 mx7_common: Define CONFIG_SYS_MALLOC_LEN in the board file by Fabio Estevam · 9 years ago
  96. 01f512b warp7: Pass the UART base definition by Fabio Estevam · 9 years ago
  97. a473122 arm: mxs: Update MX28EVK config by Marek Vasut · 9 years ago
  98. 626f048 board: Add Qualcomm Dragonboard 410C support by Mateusz Kulikowski · 9 years ago
  99. 5493a32 Migrate CONFIG_ULPI* to Kconfig by Mateusz Kulikowski · 9 years ago
  100. 39fbac9 board: ti: DRA7: Add DP83867 TI phy for rev c by Dan Murphy · 9 years ago