Gitiles
Code Review Sign In
gerrit.devboardsforandroid.linaro.org / platform / external / u-boot / c0436fcf1a5af15e5035cea71e39d3610fdecc35
  1. a7d660b tpm: Add Kconfig options for TPMs by Simon Glass · 9 years ago
  2. afc84de tpm: Drop two unused options by Simon Glass · 9 years ago
  3. 3a3f8e9 tpm: Remove old pre-driver-model I2C code by Simon Glass · 9 years ago
  4. 057d2f4 exynos: Rise ARM voltage to 1.1V for chained bootloaders by Misha Komarovskiy · 9 years ago
  5. d9917b0 buildman: Correct 'Series-cover-cc' detection logic by Simon Glass · 9 years ago
  6. e0bb89b drivers: kconfig: Sort driver menu in alphabetical order by Bin Meng · 9 years ago
  7. 99385b6 drivers: kconfig: Move PHYS_TO_BUS to "Device Drivers" menu by Bin Meng · 9 years ago
  8. 776d2ef drivers: kconfig: Move "Generic Driver Options" menu to the top by Bin Meng · 9 years ago
  9. 628d792 dm: core: Add Kconfig for simple bus driver by Marek Vasut · 9 years ago
  10. 4e9838c dm: Use dev_get_addr() where possible by Simon Glass · 9 years ago
  11. 71f1e3f dm: simplify uclass_foreach_dev() implementation by Masahiro Yamada · 9 years ago
  12. 2187113 arm: rmobile: Add Stout board support by Vladimir Barinov · 9 years ago
  13. b8f91e2 arch: rmobile: add SCIFA port base offsets by Vladimir Barinov · 9 years ago
  14. 53be7bf serial: serial-sh: SCIFA interface for R-Car Gen2 SoCs by Vladimir Barinov · 9 years ago
  15. 9035edb gpio: sh-pfc: fix gpio input read by Vladimir Barinov · 9 years ago
  16. 28f69b9 sunxi: mmc: set transfer timeout according to byte_cnt. by Yousong Zhou · 9 years ago
  17. 9236984 sunxi: Enable non-secure access to RTC on sun6i (A31s) by Chen-Yu Tsai · 9 years ago
  18. 3537a0e sunxi: Fix MAINTAINERS board sorting by Hans de Goede · 9 years ago
  19. 50222f3 sunxi: Add support for the Olimex A20 EVB by Marcus Cooper · 9 years ago
  20. 4ddcf1d sunxi: Add inet98v_rev2 defconfig and dts file by Hans de Goede · 9 years ago
  21. 1f55490 sunxi: Add inet97fv2_defconfig by Hans de Goede · 9 years ago
  22. 7a73347 sunxi: Ampe_A76_defconfig: Add otg id pin configuration by Hans de Goede · 9 years ago
  23. d90ba79 mtd: nand: Make CONFIG_SYS_NAND_U_BOOT_OFFS configurable through Kconfig by Hans de Goede · 9 years ago
  24. ddd37fe sunxi_nand_spl: clear status flags in SPL implementation by Boris Brezillon · 9 years ago
  25. 6a08d65 sunxi_nand_spl: Remove NAND_SUNXI_SPL_SYNDROME_PARTITIONS_END by Hans de Goede · 9 years ago
  26. e526861 sunxi_nand_spl: Rename SPL_NAND_SUNXI to NAND_SUNXI by Hans de Goede · 9 years ago
  27. 24a06c9 sunxi_nand_spl: Add support for backup boot partitions by Hans de Goede · 9 years ago
  28. 2b8a01a sunxi_nand_spl: Auto detect nand configuration parameters by Hans de Goede · 9 years ago
  29. f5916d1 sunxi_nand_spl: Parametrize lowlevel read functions by Hans de Goede · 9 years ago
  30. 0a24755 sunxi_nand_spl: Properly config page-size in the nand ctl register by Hans de Goede · 9 years ago
  31. 022a99d sunxi_nand_spl: Add support for sun4i and sun5i SoCs by Hans de Goede · 9 years ago
  32. 008ac1d sunxi_nand_spl: Use kernel driver algorithm for determining ecc_mode / _off by Hans de Goede · 9 years ago
  33. 2a43973 sunxi_nand_spl: Add proper cache flusing by Hans de Goede · 9 years ago
  34. 5d65c67 sunxi_nand_spl: Turn off clocks when we're done with the nand by Hans de Goede · 9 years ago
  35. 31c2147 sunxi_nand_spl: Make sure the DMA controller is enabled by Hans de Goede · 9 years ago
  36. f62bfa5 sunxi_nand_spl: Use SYS_NAND_SELF_INIT and only do nand init when necessary by Hans de Goede · 9 years ago
  37. 9da5fca sunxi_nand_spl: Do not bother writing the spare-area reg in syndrome mode by Hans de Goede · 9 years ago
  38. 630cf2e sunxi_nand_spl: We only need to reset the nand chip once by Hans de Goede · 9 years ago
  39. 10d069b sunxi_nand_spl: Drop unnecessary temp buf by Hans de Goede · 9 years ago
  40. 21d4d37 sunxi_nand_spl: Fix CONFIG_SPL_NAND_SUNXI handling by Hans de Goede · 9 years ago
  41. 6c16d08 sunxi: Add CONFIG_MMC0_CD_PIN to various boards by Hans de Goede · 9 years ago
  42. 8addd3e sunxi: Drop LCD_MODE from A13-OLinuxIno defconfigs by Hans de Goede · 9 years ago
  43. 7806b75 sunxi: musb: Drop no longer accurate comment in Kconfig help text by Hans de Goede · 9 years ago
  44. f9a3728 sunxi: Add support for gt90h-v4 tablets by Hans de Goede · 9 years ago
  45. 7a0bbe6 sunxi: axp221: Allow specifying dcdc2 voltage via Kconfig by Hans de Goede · 9 years ago
  46. 7c0e5d8 Merge branch 'master' of git://git.denx.de/u-boot-video by Tom Rini · 9 years ago
  47. c385ac2 video: discard empty video_set_lut implementation by Peng Fan · 9 years ago
  48. f875bbb ARM: dts: uniphier: add ProXstream2 and PH1-LD6b SoC/board support by Masahiro Yamada · 9 years ago
  49. 10ee0a6 ARM: dts: uniphier: add PH1-Pro5 SoC support by Masahiro Yamada · 9 years ago
  50. d243c18 ARM: dts: uniphier: sync with Linux by Masahiro Yamada · 9 years ago
  51. 6d99cfa serial: uniphier: drop platform data support by Masahiro Yamada · 9 years ago
  52. f4e190e ARM: uniphier: enable SPL_OF_CONTROL by Masahiro Yamada · 9 years ago
  53. 9271614 ARM: uniphier: select SPL_DM rather than default in defconfig by Masahiro Yamada · 9 years ago
  54. de09faa ARM: uniphier: remove unused macro by Masahiro Yamada · 9 years ago
  55. 94bd369 ARM: uniphier: fix build error when CONFIG_DEBUG_LL is defined by Masahiro Yamada · 9 years ago
  56. 2bc1f2b mtd: denali_spl: do not allocate page_buffer in .bss section by Masahiro Yamada · 9 years ago
  57. a679cc0 tools/atmelimage.c: Fix warning when debug is enabled by Tom Rini · 9 years ago
  58. 504de98 ARM: OMAP5/AM43xx: remove enabling USB clocks from enable_basic_clocks() by Kishon Vijay Abraham I · 9 years ago
  59. 6f1af1e board: ti: invoke clock API to enable and disable clocks by Kishon Vijay Abraham I · 9 years ago
  60. 09cc14f ARM: AM43xx: Add functions to enable and disable USB clocks by Kishon Vijay Abraham I · 9 years ago
  61. ca5a0f1 ARM: OMAP5: Add functions to enable and disable USB clocks by Kishon Vijay Abraham I · 9 years ago
  62. 7ba792c board: ti: OMAP5: added USB initializtion code by Kishon Vijay Abraham I · 9 years ago
  63. 7c379aa board: ti: beagle_x15: added USB initializtion code by Kishon Vijay Abraham I · 9 years ago
  64. bf0385d include: configs: am43xx_evm: add 'usb stop' in usbboot env by Kishon Vijay Abraham I · 9 years ago
  65. 03c128c board: ti: remove duplicate initialization of vbus_id_status by Kishon Vijay Abraham I · 9 years ago
  66. 0a7ab04 TI PHY: Add support to control 2nd USB PHY in DRA7xx/AM57xx by Kishon Vijay Abraham I · 9 years ago
  67. 7beaf8b ARM: DRA7: Enable clocks for USB OTGSS2 and USB PHY2 by Kishon Vijay Abraham I · 9 years ago
  68. 8af1be7 usb: dwc3: dwc3-omap: Use the clear register inorder to clear the interrupts by Kishon Vijay Abraham I · 9 years ago
  69. 2d9efa1 Makefile: fix SOURCE_DATE_EPOCH for *BSD host by Andreas Bießmann · 9 years ago
  70. 9316412 picosam9g45: adopt CONFIG_SYS_PROMPT by Andreas Bießmann · 9 years ago
  71. 610751e at91sam9260ek: add missing files to MAINTAINERS by Andreas Bießmann · 9 years ago
  72. 7751604 at91sam9rlek: add missing files to MAINTAINERS by Andreas Bießmann · 9 years ago
  73. 8ceb34a omap-common: SYS_BOOT fallback logic correction and support for more devices by Paul Kocialkowski · 9 years ago
  74. 4519668 mtd/nand/ubi: assortment of alignment fixes by Marcel Ziswiler · 9 years ago
  75. 285e266 arm: spear: Some changes / updates to the x600 config header by Stefan Roese · 9 years ago
  76. f49cc22 arm: spear: Enable caches on SPEAr by Stefan Roese · 9 years ago
  77. 2fbdbda arm: spear: Move to common SPL infrastructure by Stefan Roese · 9 years ago
  78. 80999a5 arm: spear: Fix booting - relocate vector table to 0 (low-vector) by Stefan Roese · 9 years ago
  79. 76b3f19 ARM: k2l: Fix device speeds by Lokesh Vutla · 9 years ago
  80. be8ce70 ARM: keystone2: Update README by Lokesh Vutla · 9 years ago
  81. 45fe4b4 ARM: keystone2: Build MLO by default by Lokesh Vutla · 9 years ago
  82. 5f586e9 ARM: keystone2: Rename u-boot-nand.gph to MLO by Lokesh Vutla · 9 years ago
  83. cd43ddc ARM: keystone2: move the custom build rules out to keystone specific makefile by Nishanth Menon · 9 years ago
  84. 401f2d9 ARM: keystone2: configs: Move SP to end of u-boot section by Lokesh Vutla · 9 years ago
  85. a85da21 env_mmc: Properly prefix mmc errors with '!' by Hans de Goede · 9 years ago
  86. 972ea53 malloc_simple: Correct the alignment logic in memalign_simple() by Simon Glass · 9 years ago
  87. 90c36d8 kconfiglib: update to the latest version by Ulf Magnusson · 9 years ago
  88. 76cff2b ARM: DRA74-evm: Use SMA_1 spare register to workaround DP83865 phy on SR2.0 by Nishanth Menon · 9 years ago
  89. 0358923 ARM: DRA74-evm: Add iodelay values for SR2.0 by Nishanth Menon · 9 years ago
  90. c1ea3be ARM: DRA7: Add detection of ES2.0 by Nishanth Menon · 9 years ago
  91. 70d39f5 Makefile: Use correct timezone for U_BOOT_TZ by Chris Packham · 9 years ago
  92. e9015b3 lib/display_options: Fix print_freq by Suriyan Ramasami · 9 years ago
  93. b3537c0 NDS32: Generic Board Support and Unsupport by Kun-Hua Huang · 9 years ago
  94. 2e88bb2 NDS32: Generic Board Support and Unsupport by Kun-Hua Huang · 9 years ago
  95. 14006a5 rpi: set fdt_addr_r to 0x00000100 to match default device_tree_address by Jonathan Liu · 9 years ago
  96. 9734b97 image: Fix loop condition to avoid warning by Thierry Reding · 9 years ago
  97. 79c884d Merge git://git.denx.de/u-boot-x86 by Tom Rini · 9 years ago
  98. f4b5db7 dm: pci: Document binding of pci device drivers by Bin Meng · 9 years ago
  99. a1f1582 x86: crownbay: Support Topcliff integrated pci uart devices with driver model by Bin Meng · 9 years ago
  100. cdeb2ba dm: core: Fix code reentrancy issue in device_probe_child() by Bin Meng · 9 years ago