1. c0dcece arm, am335x: add support for 3 siemens boards by Heiko Schocher · 11 years ago
  2. 457bb50 dra7xx_evm: Re-order and comment the networking related config options by Tom Rini · 11 years ago
  3. 318aeb4 omap5_uevm: Better comment why we have TCA642X and the reset time by Tom Rini · 11 years ago
  4. 078aa4f TI:omap5: Clarify comments about SPL and DDR timings in common config by Tom Rini · 11 years ago
  5. 78c392f TI:am33xx: Move SPL YMODEM support to the per-board config by Tom Rini · 11 years ago
  6. 1dd44e5 TI:armv7: Re-order slightly the generic CONFIG options, expand related comments by Tom Rini · 11 years ago
  7. 85a02aa am335x_evm: Regroup USB options by Tom Rini · 11 years ago
  8. 610af38 am335x_evm: Add comment by SPL SPI support by Tom Rini · 11 years ago
  9. a7a0640 TI:am335x: Better comment and organize the networking related options by Tom Rini · 11 years ago
  10. c3799fc omap5: Expand CONFIG_SPL_MAX_SIZE and comment upon SRAM_SCRATCH_SPACE_ADDR by Tom Rini · 11 years ago
  11. a7142dd TI:armv7: Move CONFIG_SPL_LIBDISK_SUPPORT to MMC section by Tom Rini · 11 years ago
  12. c27efde am33xx: Correct and expand comments on CONFIG_SPL_MAX_SIZE by Tom Rini · 11 years ago
  13. 372d7fa ARM: igep00x0.h: Enable raw initrd support by Javier Martinez Canillas · 11 years ago
  14. 5b47f2d sdp4430: Initialize board id using CONFIG_MACH_TYPE by Oleksandr Tyshchenko · 11 years ago
  15. 9ed887c Merge branch 'u-boot-imx/master' into 'u-boot-arm/master' by Albert ARIBAUD · 11 years ago
  16. 425faf7 Add TI816X evm board support by TENART Antoine · 11 years ago
  17. 03efcb0 arm, da850: add ipam390 board support by Heiko Schocher · 11 years ago
  18. a1665ed TI:armv7: Enable CONFIG_CMD_GPIO by Tom Rini · 11 years ago
  19. 0fedc4a TI:armv7: Enable CONFIG_CMD_SPI by Tom Rini · 11 years ago
  20. a801757 TI:omap5/dra7xx: Convert to ti_armv7_common.h by Tom Rini · 11 years ago
  21. 8769455 TI:am33xx: Create common config files for TI ARMv7 platforms, and AM33xx by Tom Rini · 11 years ago
  22. bc6fff9 am335x_evm: Bring in 'boot_fdt' logic from i.MX by Tom Rini · 11 years ago
  23. 4db4076 am335x_evm: Use default baud rate table by Tom Rini · 11 years ago
  24. 73feefd am33xx: Stop using PHYS_DRAM_1 define by Tom Rini · 11 years ago
  25. dd5729a am33xx: CONFIG_DMA_COHERENT defines are unused, remove by Tom Rini · 11 years ago
  26. a2fa28b OMAP3: igep00x0: allow booting with a FDT from MMC by Javier Martinez Canillas · 11 years ago
  27. 2be6bed ARM: igep00x0.h: Enable the use of CMD_EXT4, CMD_FS_GENERIC and zImage. by Enric Balletbo i Serra · 11 years ago
  28. 5c119cb ARM: IGEP0033: Remove duplicate / unused #defines. by Enric Balletbo i Serra · 11 years ago
  29. cf8d005 ARM: IGEP0033: Add support to boot from NAND. by Enric Balletbo i Serra · 11 years ago
  30. 2e6bc67 ARM: IGEP0033: Add support for Flattened Device Tree. by Enric Balletbò i Serra · 11 years ago
  31. d69cc4a ARM: IGEP0033: Remove undef of CONFIG_CMD_MEMTEST by Enric Balletbo i Serra · 11 years ago
  32. 8d0afcd ARM: AM43xx: Add config file by Lokesh Vutla · 11 years ago
  33. 806d279 ARM: OMAP: Add CONFIG_OMAP_COMMON by Lokesh Vutla · 11 years ago
  34. 326ea98 Merge git://git.denx.de/u-boot-arm by Stefano Babic · 11 years ago
  35. fdce7b6 gpio: omap5-uevm: Configure the tca6424 gpio expander by Dan Murphy · 11 years ago
  36. 8c6ede1 am335x_evm: Add support for eMMC environment by Justin Waters · 11 years ago
  37. a3aa70a am335x_evm: Rework bootcmd to handle two MMC devs by Justin Waters · 11 years ago
  38. 2c7c03b am335x_evm: Add command line editing by Justin Waters · 11 years ago
  39. 317fab2 am335x_evm: Make NAND support modular by Justin Waters · 11 years ago
  40. c5c7a7c am335x_evm: Add support to boot from NOR. by Steve Kipisz · 11 years ago
  41. cd8845d am335x_evm: Add support for the NOR module on the memory cape by Steve Kipisz · 11 years ago
  42. 6454028 am335x_evm: Update SPI_BOOT support, add MTDPARTS info by Tom Rini · 11 years ago
  43. 989bd7a am335x_evm: Drop useless CONFIG_ENV_IS_NOWHERE by Tom Rini · 11 years ago
  44. 58cc978 mx6qsabresd: Add splash screen support via HDMI by Pardeep Kumar Singla · 11 years ago
  45. 5ea7f0e mx6: Factor out common HDMI setup code by Pardeep Kumar Singla · 11 years ago
  46. ea70690 omap3_beagle: support booting from zImage and device tree as last option by Nishanth Menon · 11 years ago
  47. 2ade496 omap3_beagle: support findfdt and loadfdt for devicetree support by Nishanth Menon · 11 years ago
  48. 102ce9e omap3_beagle: enable CMD_FS_GENERIC and simplify load of image/ramdisk by Nishanth Menon · 11 years ago
  49. a33e3c7 omap3_beagle: replace uImage.beagle with generic uImage by Nishanth Menon · 11 years ago
  50. 664979a omap3_beagle: remove JFFS2 support. by Nishanth Menon · 11 years ago
  51. c9be62c ARM: DRA7xx: Enable CPSW Ethernet support by Mugunthan V N · 11 years ago
  52. a7d39af am335x_evm: Correct CONFIG_CMD_SPL_WRITE_SIZE by Tom Rini · 11 years ago
  53. 3afd8e0 am335x_evm: Update eMMC falcon mode locations by Tom Rini · 11 years ago
  54. d789599 am335x_evm: Correct DFU ALT settings for falcon mode by Tom Rini · 11 years ago
  55. f8b1e86 mx6qsabrelite: Remove mx6qsabrelite code in favor of nitrogen6x by Fabio Estevam · 11 years ago
  56. 8b485ba Merge branch 'u-boot/master' into u-boot-arm/master by Albert ARIBAUD · 11 years ago
  57. aaf5e82 Merge branch 'master' of git://git.denx.de/u-boot-nds32 by Tom Rini · 11 years ago
  58. 0b17998 qemu-malta: Update for SPDX license identifiers by Tom Rini · 11 years ago
  59. 230187c Merge branch 'master' of git://git.denx.de/u-boot-mips by Tom Rini · 11 years ago
  60. 76116f2 highbank: enable keyed autoboot stop by Rob Herring · 11 years ago
  61. 76c3999 ARM: highbank: setup peripherals based on power domain status by Rob Herring · 11 years ago
  62. e1df283 ARM: highbank: enable reset on command timeout by Rob Herring · 11 years ago
  63. 185a5bb ARM: highbank: update config options by Rob Herring · 11 years ago
  64. f195749 MIPS: qemu-malta: bring up ethernet by Gabor Juhos · 11 years ago
  65. feaa606 MIPS: qemu-malta: add PCI support by Gabor Juhos · 11 years ago
  66. 52caee0 MIPS: qemu-malta: enable flash support by Gabor Juhos · 11 years ago
  67. 5a4dcfa MIPS: qemu-malta: add support for emulated MIPS Malta board by Gabor Juhos · 11 years ago
  68. c2120fb Merge branch 'master' of git://git.denx.de/u-boot-i2c by Tom Rini · 11 years ago
  69. 1a45966 Add GPL-2.0+ SPDX-License-Identifier to source files by Wolfgang Denk · 11 years ago
  70. d727ab3 wandboard: Use splash image at screen center by default by Otavio Salvador · 11 years ago
  71. 5434caf ARM: mxs: Consolidate configuration options by Marek Vasut · 11 years ago
  72. e3c58b0 nds32: Enable the function of passing parameters to Linux by ken kuo · 11 years ago
  73. 61ccf08 nds32: Enable SDIO and EXT2 command support for Andes board by ken kuo · 11 years ago
  74. 3c01670 nds32: Enable two banks of SDRAM on Andes board by ken kuo · 11 years ago
  75. 1221b3d vf610: Add I2C support for Vybrid VF610 platform by Alison Wang · 11 years ago
  76. 67bfae3 arm/km: fix u-boot update functionality by Holger Brunck · 11 years ago
  77. 880540d i2c, ppc4xx_i2c: switch to new multibus/multiadapter support by Dirk Eibach · 11 years ago
  78. 1f2ba72 tegra: i2c: Enable new CONFIG_SYS_I2C framework by Simon Glass · 12 years ago
  79. f3e9361 i2c, multibus, keymile: get rid of EEprom_ivm envvariable by Heiko Schocher · 12 years ago
  80. 00f792e i2c, fsl_i2c: switch to new multibus/multiadapter support by Heiko Schocher · 12 years ago
  81. ea818db i2c, soft-i2c: switch to new multibus/multiadapter support by Heiko Schocher · 12 years ago
  82. 4ef400b arm:trats:fix: Correction of loaddtb environment variable. by Łukasz Majewski · 11 years ago
  83. b9944a7 mpc85xx: Add gdsys ControlCenter Digital board by Dirk Eibach · 11 years ago
  84. 54e458d Revert "MIPS: Jz4740: Add qi_lb60 board support" by Tom Rini · 11 years ago
  85. fbbbc86 Merge branch 'master' of git://git.denx.de/u-boot-arm by Tom Rini · 11 years ago
  86. efc284e Merge branch 'u-boot-imx/master' into 'u-boot-arm/master' by Albert ARIBAUD · 11 years ago
  87. a3f170c mx53ard: Change default environment to cope with OE changes by Otavio Salvador · 11 years ago
  88. e97721c mx51evk: Change default environment to cope with OE changes by Otavio Salvador · 11 years ago
  89. 86812c4 wandboard: Change default environment to cope with OE changes by Otavio Salvador · 11 years ago
  90. 94aeb8a mx6slevk: Change default environment to cope with OE changes by Otavio Salvador · 11 years ago
  91. 2169228 mx6qsabrelite: Change default environment to cope with OE changes by Otavio Salvador · 11 years ago
  92. 254fd8d mx53loco: Change default environment to cope with OE changes by Otavio Salvador · 11 years ago
  93. 32cc24d m28evk: add trimffs to nand command by Marek Vasut · 11 years ago
  94. d035fcf ARM: tegra: enable LCD panel on Ventana by Stephen Warren · 11 years ago
  95. b46694d ARM: tegra: enable LCD panel on Harmony by Stephen Warren · 11 years ago
  96. d6cf707 Tegra: Config: Enable Tegra30/Tegra114 USB function by Jim Lin · 11 years ago
  97. 630aacb Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master' by Albert ARIBAUD · 11 years ago
  98. 9199fce arm:trats: Increase malloc pool size (for DFU ext4 transfers) by Łukasz Majewski · 11 years ago
  99. 643be9c EXYNOS: Move files from board/samsung to arch/arm by Rajeshwari Shinde · 11 years ago
  100. 198a40b EXYNOS4210: Configure GPIO for uart by Rajeshwari Shinde · 11 years ago