- c316ee6 Merge tag 'xilinx-for-v2022.10' of https://source.denx.de/u-boot/custodians/u-boot-microblaze into next by Tom Rini · 2 years, 5 months ago
- 728a86e timer: Add SPL_REGMAP dependency for Xilinx timer by Michal Simek · 2 years, 5 months ago
- b5b8bad xilinx: Enable support for SquashFS by Michal Simek · 2 years, 5 months ago
- 036ef47 arm64: zynqmp: Move helper functions below header includes by Stefan Herbrechtsmeier · 2 years, 5 months ago
- d216254 tools: zynqmp_psu_init_minimize: Move helper functions below header includes by Stefan Herbrechtsmeier · 2 years, 5 months ago
- 4d8f2bb tools: zynqmp_psu_init_minimize: Use CR instead of LF by Stefan Herbrechtsmeier · 2 years, 5 months ago
- 2f799b4 tools: zynqmp_psu_init_minimize: Remove low level uart settings by Stefan Herbrechtsmeier · 2 years, 5 months ago
- f93c1c8 xilinx: zynqmp: make spi flash support optional by Stefan Herbrechtsmeier · 2 years, 5 months ago
- 86ceedd xilinx: common: Separate display cpu info function by Stefan Herbrechtsmeier · 2 years, 5 months ago
- 381ede9 xilinx: cpuinfo: Print soc machine by Stefan Herbrechtsmeier · 2 years, 5 months ago
- a1e618a soc: xilinx: zynqmp: Add machine identification support by Stefan Herbrechtsmeier · 2 years, 5 months ago
- 18fcb49 soc: xilinx: zynqmp: Remove redundant checks for zynqmp_mmio_read by Stefan Herbrechtsmeier · 2 years, 5 months ago
- d43d78e xilinx: zynqmp: Merge device lists by Stefan Herbrechtsmeier · 2 years, 5 months ago
- 71278c0 xilinx: zynqmp: Reuse shift macros to define masks by Stefan Herbrechtsmeier · 2 years, 5 months ago
- 9bc5a24 xilinx: zynqmp: Add macro for device type mask by Stefan Herbrechtsmeier · 2 years, 5 months ago
- bcf6f71 xilinx: zynqmp: Replace strncat with strlcat by Stefan Herbrechtsmeier · 2 years, 5 months ago
- f851be1 firmware: zynqmp: Probe driver before use by Stefan Herbrechtsmeier · 2 years, 5 months ago
- fe7090c firmware: zynqmp: Check if rx channel dev pointer is valid by Stefan Herbrechtsmeier · 2 years, 5 months ago
- a13e082 ARM: zynq: Fix size-cells for pl353 driver by Amit Kumar Mahapatra · 2 years, 5 months ago
- b8745e7 arm64: zynqmp: Fix usb node drive strength and slew rate by Ashok Reddy Soma · 2 years, 5 months ago
- aec051d microblaze: Remove interrupt handler by Michal Simek · 2 years, 5 months ago
- a36d867 microblaze: Convert axi timer to DM driver by Michal Simek · 2 years, 5 months ago
- 816226d cpu: add CPU driver for microblaze by Ovidiu Panait · 2 years, 6 months ago
- 9df16c5 microblaze: add support for handling PVR data by Ovidiu Panait · 2 years, 6 months ago
- 064057f microblaze: Kconfig: introduce XILINX_MICROBLAZE0_FPGA_FAMILY option by Ovidiu Panait · 2 years, 6 months ago
- 10f6508 microblaze: cache: introduce flush_dcache_range() by Ovidiu Panait · 2 years, 6 months ago
- 95b7a8f microblaze: cache: introduce cpuinfo structure by Ovidiu Panait · 2 years, 6 months ago
- b195134 microblaze: cache: introduce flush_cache_all() by Ovidiu Panait · 2 years, 6 months ago
- 84488fc microblaze: cache: introduce Kconfig options for icache/dcache sizes by Ovidiu Panait · 2 years, 6 months ago
- 73b8ee6 microblaze: cache: split flush_cache() function by Ovidiu Panait · 2 years, 6 months ago
- 8daf896 microblaze: cache: improve icache Kconfig options by Ovidiu Panait · 2 years, 6 months ago
- ef0a592 microblaze: cache: improve dcache Kconfig options by Ovidiu Panait · 2 years, 6 months ago
- 0ad71dc microblaze: cache: replace XILINX_USE_DCACHE -> CONFIG_DCACHE by Ovidiu Panait · 2 years, 6 months ago
- 130fae2 microblaze: start.S: remove unused code by Ovidiu Panait · 2 years, 6 months ago
- b391b91 cpu-uclass: relocate ops pointers for CONFIG_NEEDS_MANUAL_RELOC by Ovidiu Panait · 2 years, 6 months ago
- 15c924a cmd: cpu: migrate cpu command to U_BOOT_CMD_WITH_SUBCMDS() by Ovidiu Panait · 2 years, 6 months ago
- d58c007 microblaze: Add support for run time relocation by Michal Simek · 2 years, 5 months ago
- 034944b tools: relocate-rela: Add support for 32bit Microblaze relocation by Michal Simek · 2 years, 5 months ago
- 30fb8d2 tools: relocate-rela: Add support for elf32 decoding by Michal Simek · 2 years, 5 months ago
- a1405d9 tools: relocate-rela: Check that relocation works only for EM_AARCH64 by Michal Simek · 2 years, 5 months ago
- 582ffb5 tools: relocate-rela: Extract elf64 reloc to special function by Michal Simek · 2 years, 5 months ago
- 07c052b microblaze: Create SYM_ADDR macro to deal with symbols by Michal Simek · 2 years, 5 months ago
- 81169ae microblaze: Add comment about reset location by Michal Simek · 2 years, 5 months ago
- b6fe10a microblaze: Remove _start symbol handling at U-Boot start by Michal Simek · 2 years, 5 months ago
- 986727c microblaze: Remove code around r20 in relocate_code() by Michal Simek · 2 years, 5 months ago
- 3041b51 microblaze: Optimize register usage in relocate_code by Michal Simek · 2 years, 5 months ago
- 532ad5f microblaze: Change stack protection address to new stack address by Michal Simek · 2 years, 5 months ago
- 1918c41 microblaze: Separate code end substraction by Michal Simek · 2 years, 5 months ago
- 10fd6d6 microblaze: Enable REMAKE_ELF by Michal Simek · 2 years, 5 months ago
- 89e81e6 mips: Move endianness selection to arch/Kconfig by Michal Simek · 2 years, 5 months ago
- d896e79 microblaze: Fix typo in exception.c by Michal Simek · 2 years, 5 months ago
- 65a4da9 microblaze: Remove CONFIG_TEXT_BASE from code by Michal Simek · 2 years, 5 months ago
- aa0799e microblaze: Fix early stack allocation by Michal Simek · 2 years, 5 months ago
- 16a1847 microblaze: Fix stack protection behavior by Michal Simek · 2 years, 5 months ago
- 7cf236c microblaze: Switch absolute branches to relative by Michal Simek · 2 years, 5 months ago
- 4c9e2d6 tools: relocate-rela: Read rela start/end directly from ELF by Michal Simek · 2 years, 5 months ago
- d8b0444 tools: relocate-rela: Use global variables by Michal Simek · 2 years, 5 months ago
- b956637 Makefile: Fix description for relocate-rela parameters by Michal Simek · 2 years, 5 months ago
- fe9d049 tools: relocate-rela: Open binary u-boot file later by Michal Simek · 2 years, 5 months ago
- 686c2bb arm64: zynqmp: Fix tps544/u3007 node description by Michal Simek · 2 years, 5 months ago
- 5f5979f arm64: zynqmp: Update tps53681 i2c address by Michal Simek · 2 years, 5 months ago
- 0b0d433 arm64: zynqmp: Fix i2c addresses for vck190 SC by Michal Simek · 2 years, 5 months ago
- 123462e pinctrl: zynqmp: Add support for output-enable and bias-high-impedance by Ashok Reddy Soma · 2 years, 5 months ago
- b611f7f arm64: zynqmp: Enable DP for kv260-revA board by Michal Simek · 2 years, 5 months ago
- ff5d906 xilinx: zynqmp: Do not use 0 as spl bss start address by Stefan Herbrechtsmeier · 2 years, 6 months ago
- baba22a arm64: zynqmp: Add support for kr260 revA/B boards by Michal Simek · 2 years, 6 months ago
- ad55d99 serial: Setup serial base and freq for zynq/zynqmp by Michal Simek · 2 years, 6 months ago
- 254f0c7 arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() by Michal Simek · 2 years, 6 months ago
- 2eeceb4 arm64: versal: Add support to load an app at EL1 by Ashok Reddy Soma · 2 years, 7 months ago
- a110caa xilinx: Add CONFIG_DM_ETH_PHY config by T Karthik Reddy · 2 years, 7 months ago
- 8faeb02 net: xilinx: axi_emaclite: Use shared MDIO bus support for axi emaclite driver by T Karthik Reddy · 2 years, 7 months ago
- 935e362 net: xilinx: axi_emac: Use shared MDIO bus support for axi emac driver by T Karthik Reddy · 2 years, 7 months ago
- 31016a5 Merge branch '2022-06-23-scmi-optee-and-smccc-updates' into next by Tom Rini · 2 years, 5 months ago
- 3e00721 Merge branch '2022-06-23-fuzzing-and-asan-for-sandbox' into next by Tom Rini · 2 years, 5 months ago
- 53355bb drivers: rng: add smccc trng driver by Etienne Carriere · 2 years, 6 months ago
- 2fbe47b firmware: psci: bind arm smccc features when discovered by Etienne Carriere · 2 years, 6 months ago
- b1ff399 firmware: psci: reorder header files inclusion by Etienne Carriere · 2 years, 6 months ago
- f7f1240 smccc: define generic IDs for feature discovery by Etienne Carriere · 2 years, 6 months ago
- c08decd firmware: scmi: use multi channel in mailbox, optee and smccc agents by Etienne Carriere · 2 years, 6 months ago
- db59fef power: regulator: scmi: simplify scmi_voltd_set_enable() by Etienne Carriere · 2 years, 6 months ago
- ff33ed3 power: regulator: scmi: support SCMI multi-channel by Etienne Carriere · 2 years, 6 months ago
- f487a88 reset: scmi: support SCMI multi-channel by Etienne Carriere · 2 years, 6 months ago
- 38a905e clk: scmi: support SCMI multi-channel by Etienne Carriere · 2 years, 6 months ago
- 965d606 firmware: scmi: optee transport: implement multi-channel by Etienne Carriere · 2 years, 6 months ago
- 57b812f firmware: scmi: smccc transport: implement multi-channel by Etienne Carriere · 2 years, 6 months ago
- b5d32ea firmware: scmi: mailbox transport: implement multi-channel by Etienne Carriere · 2 years, 6 months ago
- 8e96801 firmware: scmi: add multi-channel support by Etienne Carriere · 2 years, 6 months ago
- 5a11df3 firmware: scmi: factorize scmi transport look up by Etienne Carriere · 2 years, 6 months ago
- 85dc582 firmware: scmi: prepare uclass to pass channel reference by Etienne Carriere · 2 years, 6 months ago
- 8bcb1b4 firmware: scmi: prepare scmi uclass API to multi-channel by Etienne Carriere · 2 years, 6 months ago
- 5d8eb4c firmware: scmi: optee: fix inline description of PTA_SCMI_CMD_GET_CHANNEL by Etienne Carriere · 2 years, 6 months ago
- 593eac9 firmware: scmi: optee: use TEE shared memory for SCMI messages by Etienne Carriere · 2 years, 6 months ago
- a73f3ba fuzz: virtio: Add fuzzer for vring by Andrew Scull · 2 years, 6 months ago
- 0518e7a sandbox: Implement fuzzing engine driver by Andrew Scull · 2 years, 6 months ago
- d9962b1 sandbox: Add libfuzzer integration by Andrew Scull · 2 years, 6 months ago
- 001c39a sandbox: Decouple program entry from sandbox init by Andrew Scull · 2 years, 6 months ago
- 36f641c test: fuzz: Add framework for fuzzing by Andrew Scull · 2 years, 6 months ago
- 3f807c6 fuzzing_engine: Add fuzzing engine uclass by Andrew Scull · 2 years, 6 months ago
- eabc4e2 CI: Azure: Build with ASAN enabled by Andrew Scull · 2 years, 6 months ago
- 791de33 test/py: test_stackprotector: Disable for ASAN by Andrew Scull · 2 years, 6 months ago