1. c3bec54 arm: omap3: Detect boot mode very early by Adam Ford · 7 years ago
  2. 72281c5 powerpc: Remove 8260 remainders by Christophe Leroy · 7 years ago
  3. 08dd988 powerpc, 8xx: fix missing function declarations. by Christophe Leroy · 7 years ago
  4. ba2c5a5 powerpc: move get_pvr() and get_svr() into C by Christophe Leroy · 7 years ago
  5. 506cb8b powerpc, 8xx: move cache helper into C by Christophe Leroy · 7 years ago
  6. 7fd697f powerpc, 8xx: move get_immr() into C by Christophe Leroy · 7 years ago
  7. 1e7cefe powerpc, 8xx: Move cache function into C files by Christophe Leroy · 7 years ago
  8. 36d3260 powerpc, 8xx: Simplifying check_CPU() by Christophe Leroy · 7 years ago
  9. f3603b4 powerpc: Remove unneccessary #ifdefs in reginfo by Christophe Leroy · 7 years ago
  10. f1cd736 powerpc: move set_msr() and get_msr() into .h by Christophe Leroy · 7 years ago
  11. f0eda3c power, timer: reset TBL before TBU by Christophe Leroy · 7 years ago
  12. 93e85d0 powerpc, timer: Does 8xx specific actions in 8xx cpu_init by Christophe Leroy · 7 years ago
  13. 0819450 powerpc: get rid of addr_probe() by Christophe Leroy · 7 years ago
  14. 7a0a550 powerpc, 8xx: Simplify brgclk calculation and remove get_brgclk() by Christophe Leroy · 7 years ago
  15. b2f2c7be km/ivm: allow to set locally administred MAC addresses by Holger Brunck · 7 years ago
  16. b63d4f3 km/ivm: always set ethaddr after reading IVM by Holger Brunck · 7 years ago
  17. 6821a74 RFC: moveconfig: Use toolchains from buildman by Simon Glass · 7 years ago
  18. dee36c7 moveconfig: Tidy up imply flag parsing by Simon Glass · 7 years ago
  19. 7fe463f board: ti: am43xx: Add FDT fixup for HS devices by Andrew F. Davis · 7 years ago
  20. 3630094 board: ti: am43xx: Add TEE loading and firewall setup by Andrew F. Davis · 7 years ago
  21. ddf0134 arm: mach-omap2: am33xx: Add FDT fixup suport for AM33xx/AM43xx boards by Andrew F. Davis · 7 years ago
  22. 137ae0c arm: mach-omap2: fdt-common: Add OP-TEE node when firmware node is defined by Andrew F. Davis · 7 years ago
  23. 0375023 arm: mach-omap2: Factor out common FDT fixup suport by Andrew F. Davis · 7 years ago
  24. 3348e0c arm: mach-omap2: Move omap5/sec-fxns.c into sec-common.c by Andrew F. Davis · 7 years ago
  25. 0d982c5 Makefile: add dependencies to regenerate u-boot.cfg when lost by Philipp Tomsich · 7 years ago
  26. 47a52cd dtc: mkimage: Add the possibility to specify DTC by Emmanuel Vadot · 7 years ago
  27. e42f096 meson-gx: reserved memory regions by xypron.glpk@gmx.de · 7 years ago
  28. 9d364af env: Switch env_nand, env_mmc and env_ubi to env_import_redund by Fiach Antaw · 8 years ago
  29. 76768f5 env: Add generic redundant environment implementation by Fiach Antaw · 8 years ago
  30. 845e10d tests: test_dfu.py: Add example udev rule for host_usb_dev_node by Tom Rini · 8 years ago
  31. 7e99e14 tools/fw_env: use fsync to ensure that data is physically stored by Michael Heimpold · 12 years ago
  32. aae6f01 mmc: cadence: use fdt32_t for DT property value to fix sparse warning by Masahiro Yamada · 7 years ago
  33. 207d8b3 mmc: add static to spl_mmc_get_device_index() by Masahiro Yamada · 7 years ago
  34. a79e8df power: regulator: lp87565: get_enable should return integer by Keerthy · 7 years ago
  35. 43d0247 power: regulator: lp873x: get_enable should return integer by Keerthy · 7 years ago
  36. 4e98a14 power: regulator: s5m8767: get_enable should return integer by Keerthy · 7 years ago
  37. 3bbe7c1 power: sandbox: fixed: get_enable should return integer by Keerthy · 7 years ago
  38. 585c703 power: regulator: rk8xx: get_enable should return integer by Keerthy · 7 years ago
  39. 2a4747d power: regulator: tps65090: get_enable should return integer by Keerthy · 7 years ago
  40. 117daa8 power: regulator: pfuze100: get_enable should return integer by Keerthy · 7 years ago
  41. 5c3195c power: regulator: palmas: get_enable should return integer by Keerthy · 7 years ago
  42. b616835 power: regulator: max77686: get_enable should return integer by Keerthy · 7 years ago
  43. 85f87de power: regulator: act8846: get_enable should return integer by Keerthy · 7 years ago
  44. 0f2194d power: regulator: fixed: get_enable should return integer by Keerthy · 7 years ago
  45. 06bdf60 regulator: Change get_enable return type to integer from bool by Keerthy · 7 years ago
  46. 343749c mmc: rpmb: update size format for write_counter by Kever Yang · 7 years ago
  47. 4dc80c8 mmc: use new hwpart API when CONFIG_BLK enabled by Kever Yang · 7 years ago
  48. 2710d54 ARM: Mark AE boards orphan by Marek Vasut · 7 years ago
  49. 39632b4 Merge branch 'master' of git://www.denx.de/git/u-boot-imx by Tom Rini · 7 years ago
  50. 651782a mx6cuboxi: Move CONFIG_CMD_SATA to Kconfig by Fabio Estevam · 7 years ago
  51. 3f0a104 mx6sabreauto: Make Ethernet functional again by Fabio Estevam · 7 years ago
  52. e14b116 Merge git://www.denx.de/git/u-boot-marvell by Tom Rini · 7 years ago
  53. bc104a7 imx: cx9020: try pxe boot, if no vmlinuz on mmc by Patrick Bruenn · 7 years ago
  54. f8e6385 imx: cx9020: use fdt_addr_r and ramdisk_addr_r by Patrick Bruenn · 7 years ago
  55. 07f6ddb mx6sabreauto: Add Falcon mode support by Diego Dorta · 7 years ago
  56. 283c2a6 warp: Use PARTUUID to specify the rootfs location by Fabio Estevam · 7 years ago
  57. 0f29a61 embestmx6boards: Use PARTUUID to specify the rootfs location by Fabio Berton · 7 years ago
  58. 35ba390 mx6cuboxi: Use PARTUUID to specify the rootfs location by Fabio Berton · 7 years ago
  59. 84b4690 wandboard: Use PARTUUID to specify the rootfs location by Fabio Berton · 7 years ago
  60. 00f43e5 mx6sabre: Use PARTUUID to specify the rootfs location by Fabio Estevam · 7 years ago
  61. ca62e5d mx6sabreauto: Do not enable WEIM by default by Fabio Estevam · 7 years ago
  62. 552a848 imx: reorganize IMX code as other SOCs by Stefano Babic · 7 years ago
  63. f34ccce mmc: fsl_esdhc: drop CONFIG_SYS_FSL_ESDHC_FORCE_VSELECT by Peng Fan · 7 years ago
  64. 4483b7e dm: mmc: fsl_esdhc: handle vqmmc supply by Peng Fan · 7 years ago
  65. 32a9179 mmc: fsl_esdhc: introduce vs18_enable for 1.8V fix I/O by Peng Fan · 7 years ago
  66. 15a9165 mmc: fsl_esdhc: correct type of wp_enable by Peng Fan · 7 years ago
  67. ed2d02d imx6_spl: Add u-boot-dtb.img for SPL payload by Jagan Teki · 7 years ago
  68. d7c1150 mx6sabreauto: Update to SPL only mode by Vanessa Maegima · 7 years ago
  69. 823dff9 mx6qsabreauto: Add SPL support by Vanessa Maegima · 7 years ago
  70. ff18156 mx6cuboxi: Add support for sata by Peter Robinson · 7 years ago
  71. d8fab10 mx7dsabresd: Set VLD04 output to 2.8V in PMIC initialization. by Gautam Bhat · 7 years ago
  72. a1d1fdc mx6: soc: Move mxs_dma_init() into the mxs nand driver by Fabio Estevam · 7 years ago
  73. 306dd7d net: fec_mxc: fix PHY initialization bug with CONFIG_DM_ETH by Lothar Waßmann · 7 years ago
  74. 34d45d1 icorem6_rqs: Rename icorem6_rqs config file by Jagan Teki · 7 years ago
  75. 022b7fb dt-bindings: Document the Broadcom STB wake-up timer node by Florian Fainelli · 7 years ago
  76. 61366b7 serial: mxc: Add debug uart support by Jagan Teki · 7 years ago
  77. 52c14ca serial: mxc: Code cleanup by Jagan Teki · 7 years ago
  78. 45d9751 serial: mxc: Move common baud gen into _mxc_serial_setbrg by Jagan Teki · 7 years ago
  79. 97548d5 serial: mxc: Move common init into _mxc_serial_init by Jagan Teki · 7 years ago
  80. 57d3e98 serial: mxc: Move cr1 and cr2 write to mxc_serial_setbrg by Jagan Teki · 7 years ago
  81. 62af03e serial: mxc: Use RFDIV in dm-code by Jagan Teki · 7 years ago
  82. ffa8bcd serial: mxc: Add common mxc_uart reg space by Jagan Teki · 7 years ago
  83. 3fd9579 imx: mx6ull: fix USB bmode for i.MX 6UL and 6ULL by Stefan Agner · 7 years ago
  84. 8be70bb ot1200: enable CONFIG_IMX_THERMAL for detailed thermal information by Christian Gmeiner · 7 years ago
  85. 258f76f mx6sabresd: Fix guard file symbol by Fabio Estevam · 7 years ago
  86. b8b9790 wandboard: Remove unnecessary delay by Fabio Estevam · 7 years ago
  87. dfa33fb cm_fx6: Remove SPL entry from CONFIG_SYS_EXTRA_OPTIONS by Fabio Estevam · 7 years ago
  88. d84a8c5 cgtqmx6eval: Remove SPL entry from CONFIG_SYS_EXTRA_OPTIONS by Fabio Estevam · 7 years ago
  89. 7f27eec mx6slevk_spl: Remove SPL entry from CONFIG_SYS_EXTRA_OPTIONS by Fabio Estevam · 7 years ago
  90. 4185723 mx6sabresd: Remove SPL entry from CONFIG_SYS_EXTRA_OPTIONS by Fabio Estevam · 7 years ago
  91. 172b2e0b arm: mvebu: clearfog: fix chip name comment by Baruch Siach · 7 years ago
  92. db7cd4ed tools/kwbimage: fix v1 header verification by Baruch Siach · 7 years ago
  93. 37d108b tools/kwbimage.h: make offset marks style consistent by Baruch Siach · 7 years ago
  94. ed72741 tools/kwbimage: update the list of SoCs using v1 header by Baruch Siach · 7 years ago
  95. b6518b1 arm64: mvebu: use single defconfig for Armada8K development boards by Igal Liberman · 7 years ago
  96. b6ee860 marvell: armada385: Add the Turris Omnia board by Marek Behún · 7 years ago
  97. aa5eb9a drivers/misc: Add basic support for ATSHA204A Crypto module by Marek Behún · 7 years ago
  98. 8e6eda7 drivers/i2c/muxes/pca954x: Add pca9547 I2C mux support by Marek Behún · 7 years ago
  99. c2502e7 arch/arm/dts: Add Turris Omnia device tree by Marek Behún · 7 years ago
  100. 2ab7704 orion_wdt: Support for the Orion Watchdog by Marek Behún · 7 years ago