1. c4c1ed6 imx8mn_var_som: Add support for Variscite VAR-SOM-MX8M-NANO board by Ariel D'Alessandro · 3 years ago
  2. 4821074 colibri-imx8x: add on-module gpio expander fxl6408 by Oleksandr Suvorov · 3 years ago
  3. 556523b arm: imx8m: imx8mm-cl-iot-gate: detect extension board by Ying-Chun Liu (PaulLiu) · 3 years, 1 month ago
  4. 27ea1c5 arm: dts: imx8mm-cl-iot-gate: add Compulab's ied overlays by Ying-Chun Liu (PaulLiu) · 3 years, 1 month ago
  5. 6293b73 imx8ulp: implement to obtain the SoC current temperature by Alice Guo · 3 years, 1 month ago
  6. dc77d0f imx8ulp: clock: Handle the DDRLOCKED when setting DDR clock by Ye Li · 3 years, 1 month ago
  7. 0f9b10a imx8ulp: clock: Support to enable/disable the ADC1 clock by Alice Guo · 3 years, 1 month ago
  8. 484b306 imx8ulp: Update ethernet mac to get from fuse by Ye Li · 3 years, 1 month ago
  9. 3b32010 imx8ulp: clock: Support to reset DCNano and MIPI DSI by Ye Li · 3 years, 1 month ago
  10. 55a7e78 imx8ulp: clock: Reset DDR controller before clock enable by Ye Li · 3 years, 1 month ago
  11. 9c7fbeb imx8ulp: Workaround LPOSC_TRIM fuse load issue by Ye Li · 3 years, 1 month ago
  12. 112b4ca imx8ulp: Remove freescale name from CPU revision by Ye Li · 3 years, 1 month ago
  13. bd8b673 imx8ulp: Fix DCNANO QoS setting by Ye Li · 3 years, 1 month ago
  14. 16062f9 imx8ulp: Set DCNANO read QoS on NIC_LPAV to highest by Ye Li · 3 years, 1 month ago
  15. 9dde390 imx8ulp_evk: Control LPI2C0 PCA6416 and TPM0 for display by Ye Li · 3 years, 1 month ago
  16. 608ed20 imx8ulp: rdc: allow A35 access flexspi0 mem by Ye Li · 3 years, 1 month ago
  17. 829e06b imx8ulp: clock: Add MIPI DSI clock and DCNano clock by Ye Li · 3 years, 1 month ago
  18. 5ff18da imx8ulp: clock: Support LPAV clocks in cgc and pcc by Ye Li · 3 years, 1 month ago
  19. 99de168 imx8ulp: assign PXP/HIFI4/EPDC to APD domain by Peng Fan · 3 years, 1 month ago
  20. d563d29 arm: imx8ulp: Allocate LPAV resources to AP domain by Ye Li · 3 years, 1 month ago
  21. 961ac78 imx8ulp: soc: Check the DBD_EN fuse before setting RDC by Ye Li · 3 years, 1 month ago
  22. 89ca5a7 ARM: imx8m: support env in fat and ext4 by Ricardo Salveti · 3 years, 1 month ago
  23. af60263 imx: nandbcb: Fix printf format in write_fcb by Pali Rohár · 3 years, 1 month ago
  24. 91f27f3 mxs: power: Change sequence of enabling DCDC switches by Lukasz Majewski · 3 years, 2 months ago
  25. cd0ecb3 imx8mm-venice-gw7902: fix M2_RST# gpio pinmux by Tim Harvey · 3 years, 2 months ago
  26. 8b71576 mx7ulp_com: add support for SPL by Ricardo Salveti · 3 years, 3 months ago
  27. 498eedc mx7ulp: select soc features by Oleksandr Suvorov · 3 years, 3 months ago
  28. 6ff55bc arm: imx: imx8mq: add support to get values for more clocks by Heiko Thiery · 3 years, 3 months ago
  29. 3aaabfe Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-sunxi by Tom Rini · 2 years, 10 months ago
  30. ce2b6c4 ARM: dts: suniv: Add device tree files and bindings for F1C100s by Icenowy Zheng · 2 years, 10 months ago
  31. cfe673c mach-sunxi: Add support for SUNIV architecture by Icenowy Zheng · 2 years, 10 months ago
  32. 645ee3c sunxi: Add F1C100s DRAM initial support by Icenowy Zheng · 2 years, 10 months ago
  33. 5d35f0f ARM: sunxi: Add clock and uart to sunxi headers by Icenowy Zheng · 2 years, 10 months ago
  34. 88998f7 arm: arm926ej-s: Add sunxi code by Icenowy Zheng · 2 years, 10 months ago
  35. 0d4377f mach-sunxi: Move timer code to mach folder by Jesse Taube · 2 years, 10 months ago
  36. 508f75a arm: arm926ej-s: start.S: port save_boot_params support from armv7 code by Icenowy Zheng · 2 years, 10 months ago
  37. b8cd7f4 armv8: remove no longer needed lowlevel_init.S by Andre Przywara · 2 years, 10 months ago
  38. 534b82a sunxi: move early "SRAM setup" into separate file by Andre Przywara · 2 years, 10 months ago
  39. 2564fce sunxi: move Cortex SMPEN setting into start.S by Andre Przywara · 2 years, 10 months ago
  40. 5bc4cd0 sunxi: move non-essential code out of s_init() by Andre Przywara · 2 years, 10 months ago
  41. 68f0896 armv8: start.S: remove CONFIG_SYS_RESET_SCTRL code by Andre Przywara · 2 years, 10 months ago
  42. 22eb7ba armv8: spl: Fix build with LINUX_KERNEL_IMAGE_HEADER by Alper Nebi Yasak · 2 years, 10 months ago
  43. 681adaa arm: dts: ls1028a-qds: declare in-band autoneg for Ethernet ports by Vladimir Oltean · 2 years, 11 months ago
  44. bee9fd2 arm: dts: ls1028a-rdb: sync device tree with Linux by Vladimir Oltean · 2 years, 11 months ago
  45. 50c49ef arm: dts: ls1028a-rdb: enable PCIe controllers from U-Boot dtsi by Vladimir Oltean · 2 years, 11 months ago
  46. f33fad6 arm: dts: ls1028a-rdb: disable I2C buses 1 through 7 by Vladimir Oltean · 2 years, 11 months ago
  47. 5b0f8ee arm: dts: ls1028a-rdb: disable DSPI nodes by Vladimir Oltean · 2 years, 11 months ago
  48. 4a5362f arm: dts: ls1028a-rdb: sync Ethernet device tree nodes with Linux by Vladimir Oltean · 2 years, 11 months ago
  49. 5009b11 arm: dts: ls1028a-rdb: sort nodes alphabetically by Vladimir Oltean · 2 years, 11 months ago
  50. aa05862 arm: dts: lx2160a-rdb: use Linux compatible string for RTC by Vladimir Oltean · 2 years, 11 months ago
  51. 41496cc arm: dts: ls1028a-rdb: use Linux compatible string for RTC by Vladimir Oltean · 2 years, 11 months ago
  52. 801f4b0 arm: dts: ls1028a-qds: use Linux compatible string for RTC by Vladimir Oltean · 2 years, 11 months ago
  53. 246b7e6 arm: dts: lx2160a-qds: use Linux compatible string for RTC by Vladimir Oltean · 2 years, 11 months ago
  54. 5d0b044 arm: dts: ls1088a-rdb: use Linux compatible string for RTC by Vladimir Oltean · 2 years, 11 months ago
  55. 489c428 arm: dts: ls1088a-qds: use Linux compatible string for RTC by Vladimir Oltean · 2 years, 11 months ago
  56. 2e14b1f arm/expu1/seli8: adapt dts NOR partition table to the latest used by Aleksandar Gerasimovski · 3 years ago
  57. 7539bb3 arm: ls1021a: limit debug eth phy speed to 100Mbps by Aleksandar Gerasimovski · 3 years ago
  58. a1d2fd3 board: traverse: add initial Ten64 support by Mathew McBride · 2 years, 10 months ago
  59. 71dcfa9 arm: kirkwood: Pogoplug-V4 : Add Kconfig files by Tony Dinh · 2 years, 10 months ago
  60. cd19787 arm: kirkwood: Pogoplug-V4 : Add DTS files by Tony Dinh · 2 years, 10 months ago
  61. e97943b sunxi: Fix H616 DRAM read calibration for dual rank by Jernej Skrabec · 2 years, 10 months ago
  62. 18a5927 sunxi: fix H616 DRAM ODT support by Jernej Skrabec · 2 years, 10 months ago
  63. 52bcc4f sunxi: Add option to prevent booting on power plug-in by Chris Morgan · 2 years, 10 months ago
  64. 8695b51 sunxi: gpio: Fix up pointer arithmetic by Andre Przywara · 2 years, 10 months ago
  65. efdd656 sunxi: gpio: Add per-bank drive and pull setters by Samuel Holland · 3 years, 1 month ago
  66. ac5397a sunxi: gpio: Return void from setter functions by Samuel Holland · 3 years, 1 month ago
  67. afe5163 ARM: dts: k3-am642-sk: Disable cpsw_port1 in SPL by Vignesh Raghavendra · 2 years, 10 months ago
  68. 22c0815 configs: stm32mp15: Enable OF_BOARD flag by Patrice Chotard · 2 years, 10 months ago
  69. 94e561f stm32prog: add partition name in treat_partition_list error messages by Patrick Delaunay · 2 years, 11 months ago
  70. 332facc ARM: dts: stm32: Synchronize DHCOM DTs with Linux 5.15.12 by Marek Vasut · 2 years, 11 months ago
  71. 6b8bd70 ARM: dts: stm32: Synchronize DHCOR DTs with Linux 5.15.12 by Marek Vasut · 2 years, 11 months ago
  72. bd485f9 arm: dts: stm32mp15: alignment with v5.16 by Patrick Delaunay · 3 years ago
  73. 5c68904 stm32mp: correct the dependency for bootcount configs by Patrick Delaunay · 3 years ago
  74. d5e8119 stm32mp: remove the bootcount activation by Patrick Delaunay · 3 years ago
  75. 3919aa1 ARM: dts: stm32: Add DFU support for DHCOR recovery by Marek Vasut · 3 years ago
  76. 757c838 arm: stm32mp: Fix USB boot device report by Marek Vasut · 3 years ago
  77. 16f4d36 arm: dts: rz-g2-beacon-u-boot: Enable pinmux for QSPI by Adam Ford · 2 years, 11 months ago
  78. 3425dec Convert CONFIG_AT91_EFLASH to Kconfig by Patrick Delaunay · 2 years, 11 months ago
  79. d3877fb Convert CONFIG_BOOTP_SERVERIP to Kconfig by Simon Glass · 3 years ago
  80. d6b318d Convert CONFIG_TIMESTAMP to Kconfig by Simon Glass · 3 years ago
  81. 2d7a463 Merge https://source.denx.de/u-boot/custodians/u-boot-marvell by Tom Rini · 2 years, 10 months ago
  82. 280db76 Merge tag 'doc-2022-04-rc1' of https://source.denx.de/u-boot/custodians/u-boot-efi by Tom Rini · 2 years, 10 months ago
  83. 0d582a4 arm: mvebu: spl: Fix 100 column exceeds by Marek Behún · 2 years, 11 months ago
  84. 37241ce arm: mvebu: spl: Use IS_ENABLED() instead of #ifdef where possible by Marek Behún · 2 years, 11 months ago
  85. c894566 arm: mvebu: spl: Use preferred types u8/u16/u32 instead of uintN_t by Marek Behún · 2 years, 11 months ago
  86. 62ee75a arm: mvebu: spl: Print srcaddr in error message by Marek Behún · 2 years, 11 months ago
  87. 402e84e arm: mvebu: Check for kwbimage data checksum by Pali Rohár · 2 years, 11 months ago
  88. f830703 arm: mvebu: Check that kwbimage blockid matches boot mode by Pali Rohár · 2 years, 11 months ago
  89. 2e0429b SPL: Add struct spl_boot_device parameter into spl_parse_board_header() by Pali Rohár · 2 years, 11 months ago
  90. 66f8748 arm: mvebu: Check that kwbimage offset and blocksize are valid by Pali Rohár · 2 years, 11 months ago
  91. 4364071 pci: pci_mvebu: Add support for Kirkwood PCIe controllers by Pali Rohár · 2 years, 11 months ago
  92. 3058e28 fdt_support: Add fdt_for_each_node_by_compatible() helper macro by Marek Behún · 2 years, 10 months ago
  93. 185f812 doc: replace @return by Return: by Heinrich Schuchardt · 2 years, 10 months ago
  94. 068415e Merge tag 'xilinx-for-v2022.04-rc1' of https://source.denx.de/u-boot/custodians/u-boot-microblaze by Tom Rini · 2 years, 10 months ago
  95. b24b201 Merge https://source.denx.de/u-boot/custodians/u-boot-samsung by Tom Rini · 2 years, 10 months ago
  96. 71efd45 arm64: zynqmp: Change firmware dependency by Michal Simek · 2 years, 11 months ago
  97. d10807a arm64: xilinx: dts: Add dma properties to fix dtbs_check warnings by Shravya Kumbham · 2 years, 11 months ago
  98. 1d70cc7 arm64: zynqmp: Update USB node handle from dwc3 to usb by Manish Narani · 2 years, 11 months ago
  99. 59b21d2 arm64: zynqmp: Change compatible strings for cadence uart by Michal Simek · 2 years, 11 months ago
  100. abc7589 ARM: dts: ast2600: Add MDIO devices by Dylan Hung · 3 years ago