1. 0413cfe Correct ffs/fls regression for PowerPC etc by Simon Kagstrom · 15 years ago
  2. a6e19d6 arm: Define test_and_set_bit and test_and_clear bit for ARM by Simon Kagstrom · 15 years ago
  3. 4b15de0 arm: Make arm bitops endianness-independent by Simon Kagstrom · 15 years ago
  4. 02f9990 Move __set/clear_bit from ubifs.h to bitops.h by Simon Kagstrom · 15 years ago
  5. 3ea43ff Merge branch 'master' of git://git.denx.de/u-boot-arm by Wolfgang Denk · 15 years ago
  6. 9f23ca4 ARM: Update mach-types by Wolfgang Denk · 15 years ago
  7. 49d2cb4 arm: Kirkwood: add SYSRSTn Duration Counter Support by Prafulla Wadaskar · 15 years ago
  8. 10bc241 imx27lite: add support for imx27lite board from LogicPD by Ilya Yanok · 15 years ago
  9. f3d4f88 Remove duplicate set_cr by Simon Kagstrom · 15 years ago
  10. 77b351c NAND: DaVinci: V2 Adding 4 BIT ECC support by Sandeep Paulraj · 15 years ago
  11. 8fa656a omap3: Fixed a problem with hwecc by Ben Goska · 15 years ago
  12. 4af3417 Monahans: avoid floating point calculations by Wolfgang Denk · 15 years ago
  13. cd3dcba OMAP3: Fix missing GPMC_CONFIG_CS0_BASE by Dirk Behme · 15 years ago
  14. ba3dbaf mxc-mmc: sdhc host driver for MX2 and MX3 proccessor by Ilya Yanok · 15 years ago
  15. 642d7b6 kirkwood/gpio.h: remove duplicate definition by Alessandro Rubini · 15 years ago
  16. a3d1421 omap3: use only fixed-size types inside ctrl_structs by Dirk Behme · 15 years ago
  17. 97a099e omap3: remove typedefs for configuration structs by Dirk Behme · 15 years ago
  18. 187af95 omap3: embedd gpmc_cs into gpmc config struct by Matthias Ludwig · 15 years ago
  19. 301b7db pxa: Fix typo in GCDR(x) by David Hunter · 15 years ago
  20. 60cbfbf arm nomadik: add gpio support by Alessandro Rubini · 15 years ago
  21. 549b983 OMAP3 Remove twl4030 defines by Tom Rix · 15 years ago
  22. 7f79dfb OMAP I2C Fix the sampling clock. by Tom Rix · 15 years ago
  23. 57215cd arm, kirkwood: added kw_gpio_set_valid() in gpio.h by Heiko Schocher · 15 years ago
  24. ec16441 Kirkwood: add Marvell Kirkwood gpio driver by Dieter Kiermaier · 15 years ago
  25. 688b6a0 arm, kirkwood: added KW_TWSI_BASE in kirkwood.h by Heiko Schocher · 15 years ago
  26. 8bf29b5 Add unaligned.h for arm by Simon Kagstrom · 15 years ago
  27. 6973fb4 Merge branch 'asm-generic' of git://git.denx.de/u-boot-microblaze by Wolfgang Denk · 15 years ago
  28. c3ae126 Merge branch 'master' of git://git.denx.de/u-boot-arm by Wolfgang Denk · 15 years ago
  29. 5ccc2d9 at91: Introduction of at91sam9g10 SOC. by Sedji Gaouaou · 15 years ago
  30. 22ee647 at91: Introduction of at91sam9g45 SOC. by Sedji Gaouaou · 15 years ago
  31. c33c599 pxa: fix CKEN_B register bits by Daniel Mack · 15 years ago
  32. bd876be pxa: add clock for system bus 2 arbiter by Daniel Mack · 15 years ago
  33. b996165 arm: Kirkwood: bugfix: UART1 bar correction by Prafulla Wadaskar · 15 years ago
  34. bc0d329 asm-generic: Consolidate errno.h to asm-generic/errno.h by Michal Simek · 15 years ago
  35. 154b548 davinci_nand chipselect/init cleanup by David Brownell · 16 years ago
  36. 496863b NAND DaVinci: Update to ALE/CLE Mask values by Sandeep Paulraj · 16 years ago
  37. 0c16844 ARM DaVinci: Changing ALE Mask Value by Sandeep Paulraj · 16 years ago
  38. 6e29ed8 davinci_nand: cleanup II (CONFIG_SYS_DAVINCI_BROKEN_ECC) by David Brownell · 16 years ago
  39. fcb7747 davinci_nand: cleanup I (minor) by David Brownell · 16 years ago
  40. 8e5e9b9 Coding style cleanup; update CHANGELOG by Wolfgang Denk · 15 years ago
  41. d08e5ca MX31: Add NAND SPL boot support to i.MX31 PDK board. by Magnus Lilja · 15 years ago
  42. 78eabb9 arm: Kirkwood: arch specific updated for ehci-Kirkwood driver support by Prafulla Wadaskar · 15 years ago
  43. 095a460 arm nomadik: use 1000 as HZ value and rewrite timer code by Alessandro Rubini · 15 years ago
  44. 2176154 ARM: Update mach-types by Jean-Christophe PLAGNIOL-VILLARD · 15 years ago
  45. 45627fc at91: Add CAN init function by Daniel Gorsulowski · 15 years ago
  46. 2e23008 arm: Kirkwood: Correct header define by Simon Kagstrom · 15 years ago
  47. 8449f28 MX31: Add basic support for Freescale i.MX31 PDK board. by Magnus Lilja · 15 years ago
  48. 06e758e move L2 cache enable/disable function to cache.c in the omap3 SoC directory by Kim, Heung Jun · 15 years ago
  49. 4efb77d arm: Kirkwood: Basic SOCs support by Prafulla Wadaskar · 15 years ago
  50. 5c3d581 arm: generic cache.h for ARM architectures by Prafulla Wadaskar · 15 years ago
  51. 9c8c706 OMAP3EVM: fix typo. replace CS6 by CS5, no functionality change by Matthias Ludwig · 15 years ago
  52. 5710de4 spi: Add Marvell Kirkwood SPI driver by Prafulla Wadaskar · 15 years ago
  53. 1dc4da7 mx27: basic cpu support by Ilya Yanok · 15 years ago
  54. dd2f696 i.MX31: Create a common device file. by Magnus Lilja · 15 years ago
  55. 958f7da ARM: Add macros.h to be used in assembler file. by Jean-Christophe PLAGNIOL-VILLARD · 15 years ago
  56. 40c642b MX31: Add NAND SPL for i.MX31. by Magnus Lilja · 15 years ago
  57. 8096c51 at91: unify nor boot support by Jean-Christophe PLAGNIOL-VILLARD · 15 years ago
  58. 01550a2 pm9263: use macro instead of hardcode value for the lowlevel_init by Jean-Christophe PLAGNIOL-VILLARD · 15 years ago
  59. 7835f4b DaVinci Network Driver Updates by s-paulraj@ti.com · 15 years ago
  60. a24d96e arch_misc_init support for ARM architectures by Prafulla Wadaskar · 15 years ago
  61. b32e189 at91: move cpu name define to arm/arch/ cpu header by Jean-Christophe PLAGNIOL-VILLARD · 15 years ago
  62. c358d9c3 arm: unify interrupt init by Jean-Christophe PLAGNIOL-VILLARD · 16 years ago
  63. 1a09d05 ARM DaVinci: Minor Updates to base addresses by s-paulraj@ti.com · 15 years ago
  64. 0c872ec OMAP3 Port kernel omap gpio interface. by Tom Rix · 15 years ago
  65. 7893aa1 ARM: Update mach-types by Jean-Christophe PLAGNIOL-VILLARD · 15 years ago
  66. 7a4f511 davinci: display correct clock info by David Brownell · 15 years ago
  67. b54384e arm: timer and interrupt init rework by Jean-Christophe PLAGNIOL-VILLARD · 15 years ago
  68. f1d944e davinci: add basic dm355/dm350/dm335 support by David Brownell · 15 years ago
  69. 7b7808a davinci: move psc support board-->cpu by David Brownell · 15 years ago
  70. f4317ea ARM: fix PXA build by defining UP2OCR by Daniel Mack · 16 years ago
  71. 792a09e Fix e-mail address of Gary Jennejohn. by Detlev Zundel · 15 years ago
  72. cba0b77 OMAP3: Print correct silicon revision by Sanjeev Premi · 16 years ago
  73. 90006e9 OMAP3: Remove unused board-types by Sanjeev Premi · 16 years ago
  74. 6a6b62e OMAP3: Use functions print_cpuinfo() and checkboard() by Sanjeev Premi · 16 years ago
  75. f0a2c7b at91: add support for the PM9263 board of Ronetix GmbH by Ilko Iliev · 16 years ago
  76. dc39ae9 at91sam9/at91cap: improve clock framework by Jean-Christophe PLAGNIOL-VILLARD · 16 years ago
  77. 3ccbfb2 Support for PXA27X UDC. by Remy Bohmer · 16 years ago
  78. 677e62f arm: update co-processor 15 access by Jean-Christophe PLAGNIOL-VILLARD · 16 years ago
  79. 843a265 at91sam9: add watchdog support by Jean-Christophe PLAGNIOL-VILLARD · 16 years ago
  80. 281dfb0 s3c4510b: move specific code to soc directory by Jean-Christophe PLAGNIOL-VILLARD · 16 years ago
  81. df486b1 at91: Support for the at91sam9g20 : Atmel 400Mhz ARM 926ej-s SOC. by Nicolas Ferre · 16 years ago
  82. e2c0476 at91sam9/at91cap: move common macb initialisation to cpu by Jean-Christophe PLAGNIOL-VILLARD · 16 years ago
  83. f3f91f8 at91sam9/at91cap: move common usb host initialisation to cpu by Jean-Christophe PLAGNIOL-VILLARD · 16 years ago
  84. 7ebafb7 at91sam9/at91cap: move common spi initialisation to cpu by Jean-Christophe PLAGNIOL-VILLARD · 16 years ago
  85. 1332a2a at91sam9/at91cap: move common serial initialisation to cpu by Jean-Christophe PLAGNIOL-VILLARD · 16 years ago
  86. 566b652 remove bi_enet*addr from global data for all arches by Mike Frysinger · 16 years ago
  87. e6a6a70 OMAP3: Add support for OMAP3 die ID by Dirk Behme · 16 years ago
  88. a2bb710 ARM: add an "eet" variant of the imx31_phycore board by Guennadi Liakhovetski · 16 years ago
  89. b30de3c i.MX31: add a simple gpio driver by Guennadi Liakhovetski · 16 years ago
  90. 80b827c ARM: synchronize mach-types.h with linux v2.6.29-rc5-315-g683fdc5 by Wolfgang Denk · 16 years ago
  91. aba45c8 OMAP3: Clean up MMC code by Dirk Behme · 16 years ago
  92. 6530a8b OMAP3: Add OMAP3 auto detection by Dirk Behme · 16 years ago
  93. f956fd0 OMAP3: Beagle: Add board revision detection by Dirk Behme · 16 years ago
  94. 9eb468d Merge branch 'master' of git://git.denx.de/u-boot-arm by Wolfgang Denk · 16 years ago
  95. 1de97f9 Eliminated arch-specific mmc header requirement by Andy Fleming · 16 years ago
  96. f15c651 Coding style cleanup; update CHANGELOG by Wolfgang Denk · 16 years ago
  97. 47d41cc Add an architecture specific config.h for common defines by Kumar Gala · 16 years ago
  98. 54dc517 mx31: add GPIO registers definitions by Ilya Yanok · 16 years ago
  99. 7d264c1 OMAP3: Add I2C support by Dirk Behme · 16 years ago
  100. b1c3bf9 OMAP3: Add MMC support by Dirk Behme · 16 years ago