1. 5e998b4 serial: ns16550: Wait in debug_uart_init until tx buffer is empty by Pali Rohár · 2 years, 5 months ago
  2. e3812b5 led: pwm: Use NOP uclass driver for top-level node by Stefan Herbrechtsmeier · 2 years, 5 months ago
  3. 7886c45 mtd: rawnand: Add support to dedicated function to set timings by Kory Maincent · 2 years, 5 months ago
  4. d1a03e6 sound: enable building DA7219 driver with ACPIGEN=n by Heinrich Schuchardt · 2 years, 5 months ago
  5. 3ca32c8 snd: enable building max98357a driver with ACPIGEN=n by Heinrich Schuchardt · 2 years, 5 months ago
  6. 64a2a7b Convert CONFIG_SYS_BOOTCOUNT_LE et al to Kconfig by Tom Rini · 2 years, 5 months ago
  7. a457ebd arm: Remove PXA architecture support by Tom Rini · 2 years, 5 months ago
  8. afe3378 Convert CONFIG_PALMAS_POWER to Kconfig by Tom Rini · 2 years, 5 months ago
  9. 0d121ad Convert CONFIG_SYS_DISCOVER_PHY to Kconfig by Tom Rini · 2 years, 5 months ago
  10. 7675a52 Convert CONFIG_SYS_UNIFY_CACHE to Kconfig by Tom Rini · 2 years, 5 months ago
  11. dea2584 usb: ohci-hcd: Remove some unused legacy code by Tom Rini · 2 years, 5 months ago
  12. cd6a45a Convert CONFIG_USB_OHCI_NEW et al to Kconfig by Tom Rini · 2 years, 5 months ago
  13. b340199 spl: Ensure all SPL symbols in Kconfig have some SPL dependency by Tom Rini · 2 years, 5 months ago
  14. abba59f Convert CONFIG_USB_XHCI_EXYNOS et al to Kconfig by Tom Rini · 2 years, 5 months ago
  15. 847505a misc: nuvoton: Add host interface configuration driver by Jim Liu · 2 years, 5 months ago
  16. a7d606f mmc/aspeed: Enable controller clocks by Joel Stanley · 2 years, 5 months ago
  17. 66900bc mmc/aspeed: Probe from controller by Joel Stanley · 2 years, 5 months ago
  18. f49a7a1 mmc/aspeed: Add debuging for clock probe failures by Joel Stanley · 2 years, 5 months ago
  19. 5020453 clk/ast2500: Add SD clock by Joel Stanley · 2 years, 5 months ago
  20. 85bb3a4 clk/ast2600: Adjust eMMC clock names by Joel Stanley · 2 years, 5 months ago
  21. 67e20f9 clk/aspeed: Add debug message when clock fails by Joel Stanley · 2 years, 5 months ago
  22. 50b23b1 i2c/aspeed: Add AST2600 compatible by Joel Stanley · 2 years, 5 months ago
  23. 453fe1e i2c/aspeed: Fix reset control by Joel Stanley · 2 years, 5 months ago
  24. 0a8bd97 reset/aspeed: Implement status callback by Joel Stanley · 2 years, 5 months ago
  25. 10c8baf soc: soc_ti_k3: identify j7200 SR2.0 SoCs by Bryan Brattlof · 2 years, 5 months ago
  26. fdd08f8 phy: nuvoton: add NPCM7xx phy control driver by Jim Liu · 2 years, 5 months ago
  27. e4b4501 firmware: ti_sci_static_data: Make file board agnostic by Vignesh Raghavendra · 2 years, 5 months ago
  28. 6bb74fe Convert CONFIG_SYS_FSL_PCI_VER_3_X to Kconfig by Tom Rini · 2 years, 5 months ago
  29. 363397a Convert CONFIG_PCI_MSC01 to Kconfig by Tom Rini · 2 years, 5 months ago
  30. 31a8f55 Convert CONFIG_SH7751_PCI to Kconfig by Tom Rini · 2 years, 5 months ago
  31. e58eebb Convert CONFIG_PCI_CONFIG_HOST_BRIDGE to Kconfig by Tom Rini · 2 years, 5 months ago
  32. bf2c48f Convert CONFIG_PCI_GT64120 to Kconfig by Tom Rini · 2 years, 5 months ago
  33. f27bca4 Convert CONFIG_PCI_SCAN_SHOW to Kconfig by Tom Rini · 2 years, 5 months ago
  34. 4e78602 pci: Remove pci_sh4 and related defines. by Tom Rini · 2 years, 5 months ago
  35. 4547a1b Convert CONFIG_PCIE_IMX to Kconfig by Tom Rini · 2 years, 5 months ago
  36. c9f8518 Convert CONFIG_SYS_FSL_SEC_MON et al to Kconfig by Tom Rini · 2 years, 5 months ago
  37. 7e7d04a Convert CONFIG_ESDHC_DETECT_QUIRK to Kconfig by Tom Rini · 2 years, 5 months ago
  38. c24e8e2 Convert CONFIG_SYS_DDR_RAW_TIMING to Kconfig by Tom Rini · 2 years, 5 months ago
  39. bca4509 Convert CONFIG_SYS_SPD_BUS_NUM to Kconfig by Tom Rini · 2 years, 5 months ago
  40. b68ba0e Convert CONFIG_USB_GADGET_DWC2_OTG_PHY to Kconfig by Tom Rini · 2 years, 5 months ago
  41. ddd39d0 Convert CONFIG_SAMSUNG_ONENAND to Kconfig by Tom Rini · 2 years, 5 months ago
  42. de0a732 Rename CONFIG_PWM to CONFIG_PWM_S5P and move to Kconfig by Tom Rini · 2 years, 5 months ago
  43. 140f0aa nxp: Cleanup some emulator related options. by Tom Rini · 2 years, 5 months ago
  44. 0285455 watchdog: designware: Make this depend on WDT by Tom Rini · 2 years, 5 months ago
  45. 69a2bb6 net: designware: Rename CONFIG_DW_GMAC_DEFAULT_DMA_PBL to GMAC_DEFAULT_DMA_PBL by Tom Rini · 2 years, 5 months ago
  46. 89d888e Convert CONFIG_DW_ALTDESCRIPTOR to Kconfig by Tom Rini · 2 years, 5 months ago
  47. 712a172 mtd: rawnand: fsl_elbc: Fix detection when nand_scan_ident() has not selected ecc.mode by Pali Rohár · 2 years, 5 months ago
  48. 284c1a9 Merge tag 'u-boot-at91-2022.10-a' of https://source.denx.de/u-boot/custodians/u-boot-at91 into next by Tom Rini · 2 years, 5 months ago
  49. c5e7003 Merge tag 'versal-qspi-for-v2022.10' of https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze into next by Tom Rini · 2 years, 5 months ago
  50. c1cadac gpio: atmel_pio4: add support for PIO_PORTE by Mihai Sain · 2 years, 6 months ago
  51. 2c27fdc spi: cadence-qspi: Fix programming ospi flash speed by T Karthik Reddy · 2 years, 6 months ago
  52. 248fe9f spi: cadence_qspi: Enable apb linear mode for apb read & write operations by T Karthik Reddy · 2 years, 6 months ago
  53. bf8dae5 spi: cadence-qspi: reset qspi flash for versal platform by T Karthik Reddy · 2 years, 6 months ago
  54. cf553bf arm64: versal: Add versal specific cadence ospi driver by T Karthik Reddy · 2 years, 6 months ago
  55. 1e2b813 spi: cadence-qspi: move cadence qspi macros to header file by T Karthik Reddy · 2 years, 6 months ago
  56. baef13e mtd: spi-nor-ids: Add support for flashes tested by xilinx by Ashok Reddy Soma · 2 years, 6 months ago
  57. 3371edd Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig by Tom Rini · 2 years, 5 months ago
  58. a89a453 usb: Remove non-DM code in ehci-fsl and xhci by Tom Rini · 2 years, 5 months ago
  59. 6e52cb2 Convert CONFIG_FPGA_STRATIX_V to Kconfig by Tom Rini · 2 years, 5 months ago
  60. 4d2cab3 video: Migrate exynos display options to Kconfig by Tom Rini · 2 years, 5 months ago
  61. 24ec3de arm: samsung: Migrate a number of symbols to Kconfig by Tom Rini · 2 years, 5 months ago
  62. 1e03e03 arm: exynos: Remove old pwm backlight driver by Tom Rini · 2 years, 5 months ago
  63. dc2d27a arm: samsung: Remove dead LCD code by Tom Rini · 2 years, 5 months ago
  64. 713a8cb block: ide: Remove ide_preinit function by Tom Rini · 2 years, 5 months ago
  65. 9836c43 ata: sata_sil: Remove useless BLK guard in sata_sil.h by Tom Rini · 2 years, 5 months ago
  66. aca1f67 Convert CONFIG_LBA48 et al to Kconfig by Tom Rini · 2 years, 5 months ago
  67. 0a816d9 Convert CONFIG_FSL_SATA_V2 to Kconfig by Tom Rini · 2 years, 5 months ago
  68. 21af94f ata: fsl_sata: Remove legacy non-BLK code by Tom Rini · 2 years, 5 months ago
  69. 7b976f7 ata: dwc_ahsata: Remove legacy non-CONFIG_AHCI code by Tom Rini · 2 years, 5 months ago
  70. 8bea4bf tpl: Ensure all TPL symbols in Kconfig have some TPL dependency by Tom Rini · 2 years, 5 months ago
  71. 4995881 usb: ehci-mx5: Remove non-DM code by Tom Rini · 2 years, 5 months ago
  72. 13750af usb: ehci-mxc: Remove by Tom Rini · 2 years, 5 months ago
  73. cbee8c1 usb: xhci-fsl: Remove non-DM code by Tom Rini · 2 years, 5 months ago
  74. d4ae152 Convert CONFIG_USB_EHCI_TXFIFO_THRESH to Kconfig by Tom Rini · 2 years, 5 months ago
  75. 0930447 usb: ehci-fsl: Remove non-DM code by Tom Rini · 2 years, 5 months ago
  76. e78e880 Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig by Tom Rini · 2 years, 5 months ago
  77. 879b0b1 Convert CONFIG_EHCI_DESC_BIG_ENDIAN et al to Kconfig by Tom Rini · 2 years, 5 months ago
  78. 90bb5c0 ehci-mxs: Remove non-DM code by Tom Rini · 2 years, 5 months ago
  79. 5c511ea Convert CONFIG_E1000_NO_NVM to Kconfig by Tom Rini · 2 years, 5 months ago
  80. 73a9616 misc: i2c_eeprom: remove 24aa02e48 by Eugen Hristev · 2 years, 6 months ago
  81. c316ee6 Merge tag 'xilinx-for-v2022.10' of https://source.denx.de/u-boot/custodians/u-boot-microblaze into next by Tom Rini · 2 years, 5 months ago
  82. 728a86e timer: Add SPL_REGMAP dependency for Xilinx timer by Michal Simek · 2 years, 5 months ago
  83. a1e618a soc: xilinx: zynqmp: Add machine identification support by Stefan Herbrechtsmeier · 2 years, 5 months ago
  84. 18fcb49 soc: xilinx: zynqmp: Remove redundant checks for zynqmp_mmio_read by Stefan Herbrechtsmeier · 2 years, 5 months ago
  85. f851be1 firmware: zynqmp: Probe driver before use by Stefan Herbrechtsmeier · 2 years, 5 months ago
  86. fe7090c firmware: zynqmp: Check if rx channel dev pointer is valid by Stefan Herbrechtsmeier · 2 years, 5 months ago
  87. a36d867 microblaze: Convert axi timer to DM driver by Michal Simek · 2 years, 5 months ago
  88. 816226d cpu: add CPU driver for microblaze by Ovidiu Panait · 2 years, 6 months ago
  89. 10f6508 microblaze: cache: introduce flush_dcache_range() by Ovidiu Panait · 2 years, 6 months ago
  90. b391b91 cpu-uclass: relocate ops pointers for CONFIG_NEEDS_MANUAL_RELOC by Ovidiu Panait · 2 years, 6 months ago
  91. 123462e pinctrl: zynqmp: Add support for output-enable and bias-high-impedance by Ashok Reddy Soma · 2 years, 5 months ago
  92. ad55d99 serial: Setup serial base and freq for zynq/zynqmp by Michal Simek · 2 years, 5 months ago
  93. 8faeb02 net: xilinx: axi_emaclite: Use shared MDIO bus support for axi emaclite driver by T Karthik Reddy · 2 years, 6 months ago
  94. 935e362 net: xilinx: axi_emac: Use shared MDIO bus support for axi emac driver by T Karthik Reddy · 2 years, 6 months ago
  95. 31016a5 Merge branch '2022-06-23-scmi-optee-and-smccc-updates' into next by Tom Rini · 2 years, 5 months ago
  96. 53355bb drivers: rng: add smccc trng driver by Etienne Carriere · 2 years, 6 months ago
  97. 2fbe47b firmware: psci: bind arm smccc features when discovered by Etienne Carriere · 2 years, 6 months ago
  98. b1ff399 firmware: psci: reorder header files inclusion by Etienne Carriere · 2 years, 6 months ago
  99. c08decd firmware: scmi: use multi channel in mailbox, optee and smccc agents by Etienne Carriere · 2 years, 6 months ago
  100. db59fef power: regulator: scmi: simplify scmi_voltd_set_enable() by Etienne Carriere · 2 years, 6 months ago