- cd87464 ti814x_evm: enable CPSW support by Matt Porter · 12 years ago
- 035d563 am33xx: add pll and clock support for TI814x CPSW by Matt Porter · 12 years ago
- 293eb33 mmc: Add support for Xilinx Zynq sdhci controller by Michal Simek · 12 years ago
- 01fbf31 net: gem: Preserve clk on emio interface by David Andrey · 12 years ago
- 117cd4c net: gem: Pass phy address to init by David Andrey · 12 years ago
- 7193653 zynq: Move macros to hardware.h by Michal Simek · 12 years ago
- f2e8a87 exynos: fdt: Add TMU node for snow by Simon Glass · 12 years ago
- 70656c7 Exynos5: Add support for USB download boot mode by Vivek Gautam · 12 years ago
- 6017954 Tegra: T30: Beaver board support. by Tom Warren · 12 years ago
- 49493cb Tegra: Split tegra_get_chip_type() into soc & sku funcs by Tom Warren · 12 years ago
- 3408a34 Tegra: All Tamonten-derived boards use onboard NAND by Thierry Reding · 12 years ago
- eac579d smdk5250, snow: convert to CONFIG_SPL_MAX_FOOTPRINT by Albert ARIBAUD · 12 years ago
- b7b5f1a da850evm, da850_am18xxevm: convert to CONFIG_SPL_MAX_FOOTPRINT by Albert ARIBAUD · 12 years ago
- e749789 cam_enc_4xx: convert to CONFIG_SPL_MAX_FOOTPRINT by Albert ARIBAUD · 12 years ago
- f84a7b8 ARM: Fix __bss_start and __bss_end in linker scripts by Albert ARIBAUD · 12 years ago
- 1812201 Merge branch 'u-boot/master' into 'u-boot-arm/master' by Albert ARIBAUD · 12 years ago
- c97b6df Merge branch 'u-boot-ti/master' into 'u-boot-arm/master' by Albert ARIBAUD · 12 years ago
- 1a9a91d arm: Make all linker scripts compatible with per-symbol sections by Benoît Thébaudeau · 12 years ago
- 52587f1 arm: Remove support for smdk6400 by Benoît Thébaudeau · 12 years ago
- 5c6db12 arm: Remove unused relocate_code() parameters by Benoît Thébaudeau · 12 years ago
- da962b7 nand: mxc: Switch NAND SPL to generic SPL by Benoît Thébaudeau · 12 years ago
- 7086e91 arm: relocate_code(): Use __image_copy_end for end of relocation by Benoît Thébaudeau · 12 years ago
- 68fbc0e imx: mx53ard: Add support for NAND Flash by Benoît Thébaudeau · 12 years ago
- 2a309f3 omap5912-osk: Fix device initialisation by Jon Hunter · 12 years ago
- 5faba1e omap5912-osk: Fix booting from NOR flash by Jon Hunter · 12 years ago
- c8b30b8 omap5912-osk: Fix DRAM initialisation by Jon Hunter · 12 years ago
- b996a3e am335x: Update timings for the beaglebone again by Tom Rini · 12 years ago
- c39d6a0 nand: Extend nand_(read|write)_skip_bad with *actual and limit parameters by Tom Rini · 12 years ago
- 2c2a9f3 ARM: OMAP5: Rename omap5_evm to omap5_uevm by SRICHARAN R · 12 years ago
- 47f58a7 omap2420-h4: Fix booting from NOR flash by Hunter, Jon · 12 years ago
- 335d939 omap2420-h4: Fix DRAM initialisation by Hunter, Jon · 12 years ago
- 5bf299b asm/omap_gpmc.h: consolidate common defines by Andreas Bießmann · 12 years ago
- cecac32 pcm051: Enable DDR PHY dynamic power down bit by Lars Poeschel · 12 years ago
- fed029f Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master' by Albert ARIBAUD · 12 years ago
- be08abc Merge branch 'u-boot-imx/master' into 'u-boot-arm/master' by Albert ARIBAUD · 12 years ago
- 7a3f481 i.MX6: mx6qsabrelite: README: don't pass chip-select to sf probe command by Javier Martinez Canillas · 12 years ago
- 38e7007 mx6: Fix get_board_rev() for the mx6 solo case by Fabio Estevam · 12 years ago
- aad4659 mmc: i.MX6: fsl_esdhc: Define maximum bus width supported by a board by Abbas Raza · 12 years ago
- 5560028 mx6qsabrelite: README: No need to pass 'u-boot.imx' by Fabio Estevam · 12 years ago
- 85449db mx6qsabre{sd,auto}: Add boot mode select by Otavio Salvador · 12 years ago
- 60bb462 mx6qsabresd: Fix card detection for invalid card id case by Otavio Salvador · 12 years ago
- 28ff917 mx6qsabresd: Document the mapping of USDHC[2-4] by Otavio Salvador · 12 years ago
- 5993053 replace last __bss_end__ occurrences with __bss_end by Albert ARIBAUD · 12 years ago
- 472d546 Consolidate bool type by York Sun · 12 years ago
- f9e4d04 Exynos: clock: Correct pwm source clk selection by Padmavathi Venna · 12 years ago
- 5644369 Merge branch 'agust@denx.de' of git://git.denx.de/u-boot-staging by Tom Rini · 12 years ago
- d0f34f1 Merge branch 'for-v2013.04' by Anatolij Gustschin · 12 years ago
- a4d40b8 Exynos5: clock: Fix a typo bug in exynos clock init by Akshay Saraswat · 12 years ago
- fc9d64f menu: Add support for user defined item choice function by Pali Rohár · 12 years ago
- db9e5e6 Exynos: clock: Fix a bug in PLL lock check condition by Akshay Saraswat · 12 years ago
- 48e2218 SMDK5250: Fix compiler warning for non-dt systems by Vivek Gautam · 12 years ago
- 009d75c Merge branch 'u-boot/master' into 'u-boot-arm/master' by Albert ARIBAUD · 12 years ago
- 1863781 SMDK5250: Use statically defined structures only in non DT case by Ajay Kumar · 12 years ago
- dc97299 SMDK5250: Add device node for DP by Ajay Kumar · 12 years ago
- 539d8f4 SMDK5250: Add device node for FIMD by Ajay Kumar · 12 years ago
- c18222b video: exynos_dp: Remove callbacks from the driver by Ajay Kumar · 12 years ago
- 29fd570 video: exynos_fb: Remove callbacks from the driver by Ajay Kumar · 12 years ago
- ebd749d Merge branch 'u-boot-tegra/master' into 'u-boot-arm/master' by Albert ARIBAUD · 12 years ago
- 412665b Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master' by Albert ARIBAUD · 12 years ago
- 6d9ea15 Tegra114: MMC: Add SD bus power-rail init routine by Tom Warren · 12 years ago
- 2a04a31 Tegra114: Dalmore: Add SDIO3 pad config to pinctrl_config table by Tom Warren · 12 years ago
- e9cd206 Tegra114: fdt: Add SDMMC (sdhci) nodes for T114 boards (Dalmore for now) by Tom Warren · 12 years ago
- af77fdb tegra114: dalmore: fdt: enable dalmore SPI controller by Allen Martin · 12 years ago
- 78f47b7 spi: add common fdt SPI driver interface by Allen Martin · 12 years ago
- ff1da6f tegra: spi: rename tegra SPI drivers by Allen Martin · 12 years ago
- 9000652 tegra: remove support for UART SPI switch by Allen Martin · 12 years ago
- c7ba18a am335x_evm: Add better timings for the new BeagleBoard DDR3 part by Tom Rini · 12 years ago
- ea7b96b ti814x_evm: add ti814x evm board support by Matt Porter · 12 years ago
- 3ba65f9 am33xx: refactor emif4/ddr to support multiple EMIF instances by Matt Porter · 12 years ago
- 81df2ba am33xx: convert defines from am33xx-specific to generic names by Matt Porter · 12 years ago
- 59dcf97 am335x: Enable DDR PHY dynamic power down bit for DDR3 boards by Vaibhav Hiremath · 12 years ago
- f35034f cm-t35: add support for loading splash image from NAND by Nikita Kiryanov · 12 years ago
- 2e72972 lcd, fb: remove duplicated prototypes and unused code by Jeroen Hofstee · 12 years ago
- 00a0ca5 common/lcd.c: remove global lcd_base by Jeroen Hofstee · 12 years ago
- f1d205a common/lcd.c: cleanup use of global variables by Jeroen Hofstee · 12 years ago
- 46d1d5d common/lcd.c: cleanup use of global variables by Wolfgang Denk · 12 years ago
- 8b906a9 Merge branch 'spi' of git://git.denx.de/u-boot-x86 by Tom Rini · 12 years ago
- 131a1e6 ARM: rpi_b: enable SD controller, add related env/cmds by Stephen Warren · 12 years ago
- 3f39778 ARM: rpi_b: use bcm2835 mbox driver to get memory size by Stephen Warren · 12 years ago
- e2d282a Add initial support for Wandboard dual lite and solo. by Fabio Estevam · 12 years ago
- 7ea01d1 x86: Add FDT SPI node for link by Simon Glass · 12 years ago
- 3c47f2f Merge branch 'master' of git://git.denx.de/u-boot-usb by Tom Rini · 12 years ago
- 0ce033d Merge branch 'master' of git://git.denx.de/u-boot-arm by Tom Rini · 12 years ago
- 83301b4 arm:trats: Use new ums command by Lukasz Majewski · 12 years ago
- e103b7a arm: Use sections header to obtain link symbols by Simon Glass · 12 years ago
- 3929fb0 Replace __bss_end__ with __bss_end by Simon Glass · 12 years ago
- b27673c Merge branch 'u-boot-tegra/master' into 'u-boot-arm/master' by Albert ARIBAUD · 12 years ago
- 6579d15 Merge branch 'u-boot-imx/master' into 'u-boot-arm/master' by Albert ARIBAUD · 12 years ago
- 19a0f7f nitrogen: Use unsigned long to specify the total RAM size by fabio.estevam@freescale.com · 12 years ago
- 477393e Tegra114: Dalmore: Add pad config tables/code based on pinmux code by Tom Warren · 12 years ago
- 5647c03 Tegra114: fdt: Move aliases from dtsi to dts file as per other Tegras by Tom Warren · 12 years ago
- f31a544 Tegra114: Dalmore: Always use DEFAULT instead of DISABLE for lock bits by Tom Warren · 12 years ago
- 190be1f Tegra30: MMC: Add SD bus power-rail and SDMMC pad init routines by Tom Warren · 12 years ago
- 1baa4e7 Tegra30: fdt: Add SDMMC (sdhci) nodes for T30 boards (Cardhu for now) by Tom Warren · 12 years ago
- 8ca79b2 Tegra30: Cardhu: Add pad config tables/code based on pinmux code by Tom Warren · 12 years ago
- 8b7776b Tegra114: pinmux: Update pinmux tables & code, fix a bug w/SDMMC3 init by Tom Warren · 12 years ago
- bb638bb Tegra30: Cardhu: Remove unneeded cardhu.c.mmc file by Tom Warren · 12 years ago
- 527519a Tegra30: fdt: Sync DT nodes with kernel DT files (I2C, SPI, GPIO, clock) by Tom Warren · 12 years ago
- 73bb244 Tegra: fdt: Remove memreserve line from Cardhu/Seaboard DT files by Tom Warren · 12 years ago
- c9aa831 Tegra: MMC: Add DT support to MMC driver for all T20 boards by Tom Warren · 12 years ago