1. d01b176 ppc: Change memsz variable to signed char by Simon Glass · 13 years ago
  2. 1c2931d arch/powerpc/lib/board.c: fix build warning by Wolfgang Denk · 13 years ago
  3. 9b998b0 arch/powerpc/lib/board.c: make (mostly) checkpatch-clean by Wolfgang Denk · 13 years ago
  4. a9f4fc3 arch/powerpc/lib/board.c: fix build warning by Wolfgang Denk · 13 years ago
  5. aab773a powerpc: Correct build warning introduced by getenv_ulong() patch by Simon Glass · 13 years ago
  6. 9d256b6 powerpc/lib/board.c: Call run_post(POST_ROM) before relocating by Bernhard Kaindl · 13 years ago
  7. 1272592 powerpc: Use getenv_ulong() in place of getenv(), strtoul by Simon Glass · 13 years ago
  8. e2a5345 net: drop !NET_MULTI code by Mike Frysinger · 13 years ago
  9. 780f13a hwmon: do not init sensors on startup by Heiko Schocher · 13 years ago
  10. 5c8404a Timer: Remove set_timer completely by Graeme Russ · 13 years ago
  11. d32a1a4 Don't grab memory for LCD if FB address is defined by Minkyu Kang · 14 years ago
  12. f9a33f1 powerpc: Add cpu_secondary_init_r to allow for initialization post env setup by Kumar Gala · 14 years ago
  13. 44c6e65 rename _end to __bss_end__ by Po-Yu Chuang · 14 years ago
  14. eddf52b Replace "FLASH" strings with "Flash" or "flash" by Peter Tyser · 14 years ago
  15. a55bb83 powerpc/85xx: Introduce CONFIG_SYS_EXTRA_ENV_RELOC by Kumar Gala · 14 years ago
  16. 57d6c58 WINBOND_83C553: enable only on boards that actually use it. by Wolfgang Denk · 14 years ago
  17. c62491d ppc: Don't initialize write protected NOR flashes by John Schmoller · 14 years ago
  18. d98b052 powerpc: Cleanup BOOTFLAG_* references by Peter Tyser · 14 years ago
  19. 14d0a02 Rename TEXT_BASE into CONFIG_SYS_TEXT_BASE by Wolfgang Denk · 14 years ago
  20. a1c4864 powerpc: Zero out board info struct on bootup by Peter Tyser · 14 years ago
  21. 76221a6 PowerPC: change board specific early pci_init() into generic. by Andre Schwarz · 14 years ago
  22. 544d97e PCU_E: remove code for yet another corpse by Wolfgang Denk · 14 years ago
  23. 2495664 Remove unused CONFIG_SERIAL_SOFTWARE_FIFO feature by Stefan Roese · 14 years ago
  24. 3fbeeea common: move TOTAL_MALLOC_LEN to include/common.h by Heiko Schocher · 14 years ago
  25. 3611665 Cleanup use of CONFIG_SYS_SRAM_BASE and CONFIG_SYS_SRAM_SIZE by Wolfgang Denk · 14 years ago
  26. a806035 Save environment data to mmc. by Terry Lv · 15 years ago
  27. cdb7497 Rename getenv_r() into getenv_f() by Wolfgang Denk · 14 years ago
  28. 1a2e203 mpc83xx: turn on icache in core initialization to improve u-boot boot time by Kim Phillips · 15 years ago
  29. a47a12b Move arch/ppc to arch/powerpc by Stefan Roese · 15 years ago[Renamed from arch/ppc/lib/board.c]
  30. ea0364f Move lib_$ARCH directories to arch/$ARCH/lib by Peter Tyser · 15 years ago[Renamed from lib_ppc/board.c]
  31. 4b99327 PPC: Record U-Boot's relocated address in RAM and show in bdinfo. by Richard Retanubun · 15 years ago
  32. 82826d5 mpc512x: Add display of reset status register by Detlev Zundel · 15 years ago
  33. f947690 mpc85xx, mpc86xx: Fix gd->cpu pointer after relocation by Peter Tyser · 15 years ago
  34. 91525c6 mpc85xx: Fix booting on various boards by Anton Vorontsov · 15 years ago
  35. 310cecb Add bb_miiphy_init call before any ethernet bring-up code. by Luigi 'Comio' Mantellini · 15 years ago
  36. a0e2066 ppc: Remove board.c relocation fixups by Peter Tyser · 15 years ago
  37. 004eca0 ppc: Clean up calling of phy_reset() during init by Peter Tyser · 15 years ago
  38. 3a8f28d ppc: Clean up calling of misc_init_r() during init by Peter Tyser · 15 years ago
  39. 13d46ab ppc/8xxx: relocate cpu pointer in global data by Kumar Gala · 15 years ago
  40. d4e8ada Consolidate arch-specific mem_malloc_init() implementations by Peter Tyser · 15 years ago
  41. a483a16 Standardize mem_malloc_init() implementation by Peter Tyser · 15 years ago
  42. 5e93bd1 Consolidate arch-specific sbrk() implementations by Peter Tyser · 15 years ago
  43. 0e87098 8xxx: Removed CONFIG_NUM_CPUS from 85xx/86xx by Poonam Aggrwal · 15 years ago
  44. 9c67352 Revert "ppc: Unlock cache-as-ram in a consistent manner" by Wolfgang Denk · 15 years ago
  45. 982adfc ppc: Unlock cache-as-ram in a consistent manner by Peter Tyser · 15 years ago
  46. 52cb4d4 stdio/device: rework function naming convention by Jean-Christophe PLAGNIOL-VILLARD · 16 years ago
  47. 0f89860 83xx: Replace CONFIG_MPC83XX with CONFIG_MPC83xx by Peter Tyser · 15 years ago
  48. 55e0ed6 make MODEM SUPPORT generic instead of duplicate it by Jean-Christophe PLAGNIOL-VILLARD · 16 years ago
  49. c790b04 lib_arch/board.c: Move malloc initialization before flash_init() by Stefan Roese · 16 years ago
  50. c0a14ae Update CHANGELOG, coding style cleanup. by Wolfgang Denk · 16 years ago
  51. fc39c2fd 85xx/86xx: Ensure MP boot page is not used by Kumar Gala · 16 years ago
  52. 02a301c powerpc: Only use eth_getenv_enetaddr() if networking is enabled by Stefan Roese · 16 years ago
  53. ff7dc06 powerpc: Fix compilation warning in board.c by Stefan Roese · 16 years ago
  54. eb85aa5 ppc: mark global bi_enet*addr as legacy by Mike Frysinger · 16 years ago
  55. 9c15010 boards: get mac address from env and move load_sernum_ethaddr() to board init by Mike Frysinger · 16 years ago
  56. d8d21e6 boards: move board_get_enetaddr() into board-specific init by Mike Frysinger · 16 years ago
  57. 0107cf6 nx823: get mac address from environment by Mike Frysinger · 16 years ago
  58. 506f391 8xx, icache: enabling ICache not before running from RAM by Heiko Schocher · 16 years ago
  59. 9c2d63e i2c, dtt: move dtt_init () to board_init_r () by Heiko Schocher · 16 years ago
  60. 272cc70 Add MMC Framework by Andy Fleming · 16 years ago
  61. 87c9063 ppc: Move CONFIG_MAX_MEM_MAPPED to common config.h by Kumar Gala · 16 years ago
  62. c9315e6 mpc86xx: Add support to populate addr map based on BATs by Becky Bruce · 16 years ago
  63. cf7e399 SATA: do not auto-initialize during boot by Mike Frysinger · 16 years ago
  64. ecf5b98 85xx: Add support to populate addr map based on TLB settings by Kumar Gala · 16 years ago
  65. d025aa4 lib_ppc: Move trap_init to occur earlier by Becky Bruce · 16 years ago
  66. 6d0f6bc rename CFG_ macros to CONFIG_SYS by Jean-Christophe PLAGNIOL-VILLARD · 16 years ago
  67. c68a05f Adds two more ethernet interface to 83xx by richardretanubun · 16 years ago
  68. 374b903 Fix compiler warning in lib_ppc/board.c by Heiko Schocher · 16 years ago
  69. 0f8cbc1 Do not init SATA when disabled on 8536DS. by Jason Jin · 16 years ago
  70. 0e8d158 rename CFG_ENV macros to CONFIG_ENV by Jean-Christophe PLAGNIOL-VILLARD · 16 years ago
  71. 93f6d72 rename CFG_ENV_IS_NOWHERE in CONFIG_ENV_IS_NOWHERE by Jean-Christophe PLAGNIOL-VILLARD · 16 years ago
  72. 9314cee rename CFG_ENV_IS_IN_NVRAM in CONFIG_ENV_IS_IN_NVRAM by Jean-Christophe PLAGNIOL-VILLARD · 16 years ago
  73. bb1f8b4 rename CFG_ENV_IS_IN_EEPROM in CONFIG_ENV_IS_IN_EEPROM by Jean-Christophe PLAGNIOL-VILLARD · 16 years ago
  74. 32628c5 cmd_mac: Move conditional compilation to Makefile by Jean-Christophe PLAGNIOL-VILLARD · 16 years ago
  75. 0768b7a Consolidate strmhz() implementation by Haavard Skinnemoen · 16 years ago
  76. b64f190 Fix printf() format issues with sizeof_t types by using %zu by Wolfgang Denk · 16 years ago
  77. 06c53be Fix some more print() format errors. by Wolfgang Denk · 16 years ago
  78. 9fea65a ppc4xx: Rename CONFIG_XILINX_ML300 to CONFIG_XILINX_405 by Michal Simek · 16 years ago
  79. f8cc312 Move conditional compilation of MPC8XXX SPI driver to Makefile by Ben Warren · 16 years ago
  80. f060054 FSL LAW: Keep track of LAW allocations by Kumar Gala · 16 years ago
  81. 95d449a Avoid initrd and logbuffer area overlaps by Marian Balakowicz · 17 years ago
  82. d6ac2ed Remove prototypes of nand_init() in favor of including nand.h. by Scott Wood · 16 years ago
  83. ee0cfa7 Revert "Avoid initrd and logbuffer area overlaps" by Wolfgang Denk · 17 years ago
  84. 1b5605c Avoid initrd and logbuffer area overlaps by Marian Balakowicz · 17 years ago
  85. c59518e ppc: Cleanup get_effective_memsize() use by Marian Balakowicz · 17 years ago
  86. 78e4882 lib_ppc: Revert "Make MPC83xx one step closer to full relocation." by Kim Phillips · 17 years ago
  87. dfc6c7b ppc: Revert patch 70431e8a that used _start instead of CFG_MONITOR_BASE by Stefan Roese · 17 years ago
  88. e59af4b Merge branch 'master' of git://www.denx.de/git/u-boot-mpc83xx by Wolfgang Denk · 17 years ago
  89. 70431e8 Make MPC83xx one step closer to full relocation. by Joakim Tjernlund · 17 years ago
  90. 5b2793a mpc8323erdb: fix EEPROM page size and get MAC from EEPROM by Michael Barkowski · 17 years ago
  91. 6fb4b64 ppc: Set CFG_MEM_TOP_HIDE to 0 if not already defined by Stefan Roese · 17 years ago
  92. 14f73ca ppc: Add CFG_MEM_TOP_HIDE option to hide memory area that doesn't get "touched" by Stefan Roese · 17 years ago
  93. cd54081 ata: enable the sata initialize on boot up by Dave Liu · 17 years ago
  94. 9c666a7 ppc: Allow boards to specify how much memory they can map by Kumar Gala · 17 years ago
  95. 3d61018 The patch introduces the alternative configuration of the log buffer for the lwmon5 board: the storage for the log-buffer itself is OCM(on-chip memory), the log-buffer header is moved to six GPT registers (PPC440EPX_GPT0_COMP1, ..., PPC440EPX_GPT0_COMP5). by Yuri Tikhonov · 17 years ago
  96. 81d93e5 ppc: Allow boards to specify effective amount of memory by Kumar Gala · 17 years ago
  97. ed3afca Merge branch 'master' of git://www.denx.de/git/u-boot-mpc86xx by Wolfgang Denk · 17 years ago
  98. d59feff FSL: Fix common EEPROM_data structure definition by Haiying Wang · 17 years ago
  99. 04a9e11 Add support for a Freescale non-CPM SPI controller by Ben Warren · 17 years ago
  100. 5d49e0e MPC512X: Cleanup bus clock names. by Grzegorz Bernacki · 17 years ago