1. 8a54aa0 DaVinci DA8xx: tidy up clock ID definition by Laurence Withers · 12 years ago
  2. 308252a dm: Move OMAP GPIO driver to drivers/gpio/ by Marek Vasut · 12 years ago
  3. db7dd81 am33xx: Rework pinmux functions by Tom Rini · 12 years ago
  4. 726c05d am33xx evm: Add CONFIG_CMD_EEPROM and related by Tom Rini · 12 years ago
  5. 65d750b am33xx: Add support for TI AM335x StarterKit EVM by Tom Rini · 12 years ago
  6. 973b663 am33xx: Remove board/ti/am335x/evm.c by Tom Rini · 12 years ago
  7. d4898ea am33xx: Add DDR3 (Micron MT41J128M16JT-125) timings and support by Tom Rini · 12 years ago
  8. 318f27c am33xx: Rework config_ddr to make DDR3 support easier. by Tom Rini · 12 years ago
  9. 942d3f0 am33xx: Move some variables in emif4.c, mark them static. by Tom Rini · 12 years ago
  10. a74f0c7 am33xx: Correct and clean up ddr_regs struct by Tom Rini · 12 years ago
  11. 82afcc9 am33xx: Do not touch 'ratio1' fields by Tom Rini · 12 years ago
  12. 5ac3b7a am33xx: Rework config_io_ctrl slightly by Tom Rini · 12 years ago
  13. ff7ec0f am33xx: Use emif_regs struct for storing initialization values by Tom Rini · 12 years ago
  14. 87a1acb am33xx: Turn a number of 'int' functions to 'void' by Tom Rini · 12 years ago
  15. c48c895 am33xx: Document what we're doing with ddrctrl->ddrckectrl by Tom Rini · 12 years ago
  16. 7d8a961 am335x: ddr_defs: Update EMIF parameters by Vaibhav Bedia · 13 years ago
  17. c8da4a5 am33xx: Clean up unused DDR defines, prefix more with 'DDR2' by Tom Rini · 12 years ago
  18. b971dfa am33xx: Move the call to ddr_pll_config, make it take the frequency by Tom Rini · 12 years ago
  19. fda35eb am33xx: Pass to config_ddr the type of memory that is connected by Tom Rini · 12 years ago
  20. bce58fe am33xx: Make config_cmd_ctrl / config_ddr_data take const structs by Tom Rini · 12 years ago
  21. 10e7e36 am33xx: Rework DDR2 EMIF initalization slightly by Tom Rini · 12 years ago
  22. 372f11f am33xx: Bugfix to config_sdram() by Tom Rini · 12 years ago
  23. 13f1c44 am33xx: Remove extra check in enable_ddr_clocks by Tom Rini · 12 years ago
  24. 7d5eb34 am33xx: Convert to using <asm/emif.h> to describe the EMIF by Tom Rini · 12 years ago
  25. 79b3e6b am33xx: Remove DMM_BASE define by Tom Rini · 12 years ago
  26. a438c75 am33xx: Enable gpio0 clock by Tom Rini · 12 years ago
  27. 41708a5 OMAP3: mem: Add Numonyx OneNAND 200MHz timing information by Javier Martinez Canillas · 12 years ago
  28. 89017e1 am33xx: pin mux defintions for CPSW switch by Chandan Nath · 12 years ago
  29. e79cd8e am33xx: CPSW init and definitions by Chandan Nath · 12 years ago
  30. 680866a arm/davinci/da850: add uart0 pinmux by Mikhail Kshevetskiy · 12 years ago
  31. 89473d2 arm/davinci: fix DDR2/mDDR memory controller initialization for Omap L138 by Mikhail Kshevetskiy · 12 years ago
  32. c50afc1 Revert "arm: armv7: add compile option -mno-unaligned-access if available" by Albert ARIBAUD · 12 years ago
  33. d3decde omap: am335x_evm: enable i2c1 channel by Steve Sakoman · 12 years ago
  34. 0d986e6 da850/omap-l138: Add support to read u-boot image from MMC/SD by Lad, Prabhakar · 12 years ago
  35. 560e69b arm, davinci: perform check for initializing global data and serial init by Lad, Prabhakar · 12 years ago
  36. ecc98ec da850/omap-l138: Add MMC support for DA850/OMAP-L138 by Lad, Prabhakar · 12 years ago
  37. 3b97152 omap: am33xx: enable gpio support by Steve Sakoman · 12 years ago
  38. 0044c42 Consolidate bootcount code into drivers/bootcount by Stefan Roese · 12 years ago
  39. d7903ae mpc5xxx: add GPIO port configuration by Anatolij Gustschin · 12 years ago
  40. 31d4fe8 sh: tmu: Removed arch/sh/include/asm/clk.h by Nobuhiro Iwamatsu · 12 years ago
  41. d443042 sh: tmu: Changed switch statement to shift operation by Nobuhiro Iwamatsu · 12 years ago
  42. 73f35e0 sh: tmu: Changed TMU driver using array of structures by Nobuhiro Iwamatsu · 12 years ago
  43. 11a05fb nds32: fix unused pmu_init warning by Mike Frysinger · 12 years ago
  44. 782ff0c nds32: delete unused local variable by Mike Frysinger · 12 years ago
  45. 38230ee nds32: drop bi_enetaddr from global data by Mike Frysinger · 12 years ago
  46. 3874a37 openrisc: Work around potential relocation issues by Julius Baxter · 13 years ago
  47. 2095947 powerpc: Fix declaration type for I/O functions by Prabhakar Kushwaha · 13 years ago
  48. a16a5cc powerpc:Fix return type & parameter passed for I/O functions by Prabhakar Kushwaha · 13 years ago
  49. 47fde91 global_data: unify global flag defines by Mike Frysinger · 13 years ago
  50. 1d56f63 Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx by Wolfgang Denk · 12 years ago
  51. 5c5befd powerpc/85xx: use CONFIG_SYS_FSL_PCIE_COMPAT macro when setting the PCI LIODNs by Timur Tabi · 12 years ago
  52. 718f2b3 powerpc/mpc85xx: Ignore E bit for BSC9130/1 by York Sun · 12 years ago
  53. 7ee4110 powerpc/85xx: improve definition of BR_PHYS_ADDR macro by Timur Tabi · 12 years ago
  54. 98de369 powerpc/ddr: fix fsl_ddr_get_dimm_params compile error by Shaohui Xie · 12 years ago
  55. 535a159 powerpc/mpc8xxx: fix workaround for errata DDR111 and DDR134 for DDR over 4GB by York Sun · 12 years ago
  56. d185857 sh: modify checkcpu() for SH-4A by Yoshihiro Shimoda · 12 years ago
  57. 948fa17 Merge branch 'master' of git://git.denx.de/u-boot-i2c by Wolfgang Denk · 12 years ago
  58. d978780 Merge branch 'master' of git://git.denx.de/u-boot-microblaze by Wolfgang Denk · 12 years ago
  59. 91dffb1 I2C: Move struct s3c24x0_i2c to a common place. by Rajeshwari Shinde · 12 years ago
  60. c65c05f EXYNOS: PINMUX: Add pinmux support for I2C by Rajeshwari Shinde · 12 years ago
  61. 8da3eb1 EXYNOS5: define EXYNOS5_I2C_SPACING by Rajeshwari Shinde · 12 years ago
  62. 1a758ae EXYNOS: Add I2C base address. by Rajeshwari Shinde · 12 years ago
  63. 989feb8 EXYNOS: CLK: Add i2c clock by Rajeshwari Shinde · 12 years ago
  64. cc54a0f imx-common: add i2c.c for bus recovery support by Troy Kisky · 12 years ago
  65. df369dc i.mx53: add definition for I2C3_BASE_ADDR by Troy Kisky · 12 years ago
  66. 18c0ad2 i.mx: iomux-v3.c: move to imx-common directory by Troy Kisky · 12 years ago
  67. af2a35f i.mx: iomux-v3.h: move to imx-common include directory by Troy Kisky · 12 years ago
  68. d3394ec iomux-v3: remove include of mx6x_pins.h by Troy Kisky · 12 years ago
  69. b98b611 Merge branch 'next' of git://git.denx.de/u-boot by Wolfgang Denk · 12 years ago
  70. 15ae8a3 MPC8xx: Fixup warning in arch/powerpc/cpu/mpc8xx/cpu.c by Marek Vasut · 12 years ago
  71. 00d8f4c Merge branch 'master' of git://git.denx.de/u-boot-arm by Wolfgang Denk · 12 years ago
  72. 569fadc MPC83xx, MPC85xx: compile stub cache function by Stefano Babic · 12 years ago
  73. f8f09dd ARM1136: Fix cache range checks by Benoît Thébaudeau · 12 years ago
  74. 6b8ac52 mx6: Make pad name macro consistent with the datasheet by Ashok · 12 years ago
  75. c2b3dcc Merge branch 'master' of git://git.denx.de/u-boot-arm by Wolfgang Denk · 12 years ago
  76. 8d73284 nds32: split common cache access from cpu into lib by Macpaul Lin · 12 years ago
  77. a21c651 ARM: lib: Remove CONFIG_ARCH_CPU_INIT dependency by Fabio Estevam · 13 years ago
  78. 5eb4974 arm: armv7: add compile option -mno-unaligned-access if available by Tetsuyuki Kobayashi · 12 years ago
  79. 448217d arm: Fix to mistake clean the memory space by Zhong Hongbo · 12 years ago
  80. de6f604 mxc_i2c: specify i2c base address in config file by Troy Kisky · 13 years ago
  81. 575a3d2 microblaze: intc: Clear interrupt code by Michal Simek · 12 years ago
  82. e0bb305 microblaze: Call serial multi initialization by Michal Simek · 12 years ago
  83. 779bf42 microblaze: Move __udelay implementation by Michal Simek · 12 years ago
  84. 36c7e6e microblaze: Remove extern from board.c by Michal Simek · 12 years ago
  85. 895f3e0 Merge branch 'master' of git://git.denx.de/u-boot-arm by Wolfgang Denk · 12 years ago
  86. 30704da EXYNOS: Fix USB compiler warning by Rajeshwari Shinde · 12 years ago
  87. ba662f8 Merge branch 'master' of git://git.denx.de/u-boot-usb by Wolfgang Denk · 12 years ago
  88. 8b3f7bf tegra: usb: Fix device enumeration problem of USB1 by Jim Lin · 12 years ago
  89. a016e14 tegra: add GMC/GMD funcmux entry for SFLASH by Stephen Warren · 12 years ago
  90. 9cd3f3a tegra: add enterrcm command by Stephen Warren · 12 years ago
  91. f857fff tegra: usb: fix wrong error check by Lucas Stach · 12 years ago
  92. f97daaa tegra: add ULPI on USB2 funcmux entry by Lucas Stach · 12 years ago
  93. 86d74d0 EXYNOS5: USB: Fix incorrect USB base addresses by Rajeshwari Shinde · 12 years ago
  94. c48ac11 EXYNOS: Add power Enable/Disable for USB-EHCI by Rajeshwari Shinde · 12 years ago
  95. 71045da USB: EXYNOS: Set USB 2.0 HOST Link mode by Rajeshwari Shinde · 12 years ago
  96. f9c4e04 EXYNOS5: Add structure for PMU registers by Rajeshwari Shinde · 12 years ago
  97. 775b6f7 EXYNOS5: Fix system register structure by Rajeshwari Shinde · 12 years ago
  98. 7590d3c USB: EXYNOS: Incorporate EHCI review comments by Rajeshwari Shinde · 12 years ago
  99. 2e65b44 microblaze: Move individual board linker scripts to common script in cpu tree. by Michal Simek · 12 years ago
  100. d6afd68 microblaze: Add gpio.h by Michal Simek · 12 years ago