Gitiles
Code Review Sign In
gerrit.devboardsforandroid.linaro.org / platform / external / u-boot / d1c07785fd68def6aa2251a15eed99f2e9c8071f / drivers / mmc / mmc.c
  1. 6cf8a90 mmc: Rename timeout parameters for clarification by Sam Protsenko · 5 years ago
  2. 116cffe mmc: Fix timeout values passed to mmc_wait_dat0() by Sam Protsenko · 5 years ago
  3. fea3939 mmc: relocate code comment by Baruch Siach · 5 years ago
  4. 44acd49 mmc: support hs400 enhanced strobe mode by Peng Fan · 5 years ago
  5. f49ff79 mmc: skip select_mode_and_width for MMC SPI host by Anup Patel · 5 years ago
  6. 0538477 mmc: retry a few times if a partition switch failed by Jean-Jacques Hiblot · 5 years ago
  7. 9bc5666 mmc: do not change mode when accessing a boot partition by Jean-Jacques Hiblot · 5 years ago
  8. bb98b8c mmc: During a switch, poll on dat0 if available and check the final status by Jean-Jacques Hiblot · 5 years ago
  9. 513e00b mmc: When switching partition, use the timeout specified in the ext_csd by Jean-Jacques Hiblot · 5 years ago
  10. 39320c5 mmc: use the generic timeout for cmd6 (SWITCH) provided in the ext_csd by Jean-Jacques Hiblot · 5 years ago
  11. cd0b80e mmc: if possible, poll the busy state using DAT0 by Jean-Jacques Hiblot · 5 years ago
  12. 863d100 mmc: add mmc_poll_for_busy() and change the purpose of mmc_send_status() by Jean-Jacques Hiblot · 5 years ago
  13. c5bda37 Revert "mmc: Add a new callback function to perform the 74 clocks cycle sequence" by Jean-Jacques Hiblot · 5 years ago
  14. 72119aa mmc: Avoid HS400 mode when accessing boot partitions by Marek Vasut · 6 years ago
  15. 5cf1203 mmc: correct the HS400 initialization process by BOUGH CHEN · 6 years ago
  16. 7d5ccb1 mmc: Align MMC_TRACE with tiny printf by Marek Vasut · 6 years ago
  17. fceea99 mmc: Downgrade SD/MMC from UHS/HS200/HS400 modes before boot by Marek Vasut · 6 years ago
  18. 6892550 mmc: Do not poll using CMD13 when changing timing by Marek Vasut · 6 years ago
  19. b9a2a0e mmc: Add support for downgrading HS200/HS400 to HS mode by Marek Vasut · 6 years ago
  20. eef05fd mmc: bring back partition init for non-DM MMC drivers by Andre Przywara · 6 years ago
  21. cf34576 mmc: Do not issue CMD 6 on SD 1.00 and SD 1.01 by Marek Vasut · 6 years ago
  22. d0851c8 blk: Call part_init() in the post_probe() method by Bin Meng · 6 years ago
  23. 3dd2626 mmc: add HS400 support by Peng Fan · 6 years ago
  24. 6c09eba mmc: break out get_op_cond code to its own function by Jon Nettleton · 6 years ago
  25. 62d77ce mmc: Improve tinification by Marek Vasut · 7 years ago
  26. 36332b6 mmc: Changed the datatype of the variable to handle 64-bit arch by Vipul Kumar · 7 years ago
  27. d2faadb mmc: add the debug message in mmc_set_clock by Jaehoon Chung · 7 years ago
  28. 6511718 mmc: add the MMC_CLK_ENABLE/DISABLE macro in mmc.h by Jaehoon Chung · 7 years ago
  29. 83d290c SPDX: Convert all of our single license tags to Linux Kernel style by Tom Rini · 7 years ago
  30. 0a4c2b0 mmc: fix return value check condition by Peng Fan · 7 years ago
  31. ec360e6 mmc: Staticize sd_select_bus_width by Marek Vasut · 7 years ago
  32. 76584e3 mmc: fix off-by-one bug in mmc_startup_v4() by Alexander Kochetkov · 7 years ago
  33. 8a856db mmc: Drop unnecessary case for mmc_probe() by Faiz Abbas · 7 years ago
  34. 1b313aa mmc: synchronize the sequence with enum bus_mode in mmc.h by Jaehoon Chung · 7 years ago
  35. ace1bed mmc: fix bug in mmc_startup_v4() by Jean-Jacques Hiblot · 7 years ago
  36. a0276f3 mmc: Fix bug in sd_set_card_speed() by Jean-Jacques Hiblot · 7 years ago
  37. d4d6488 mmc: use pr_* log functions by Masahiro Yamada · 7 years ago
  38. 2f516e4 mmc: Poll for broken card detection case by Jun Nie · 7 years ago
  39. c0fafe6 mmc: fix to assign to correct clock value when clock is enabling by Jaehoon Chung · 7 years ago
  40. 9546eb9 mmc: fix the wrong disabling clock by Jaehoon Chung · 7 years ago
  41. b7a6e2c mmc: remove hc_wp_grp_size from struct mmc if not needed by Jean-Jacques Hiblot · 7 years ago
  42. 173c06d mmc: don't read the size of eMMC enhanced user data area in SPL by Jean-Jacques Hiblot · 7 years ago
  43. e6fa5a5 mmc: compile out erase and write mmc commands if write operations are not enabled by Jean-Jacques Hiblot · 7 years ago
  44. 5b2e72f mmc: read ssr only if MMC write support is enabled by Jean-Jacques Hiblot · 7 years ago
  45. 58a6fb7 mmc: reworked version lookup in mmc_startup_v4 by Jean-Jacques Hiblot · 7 years ago
  46. baef207 mmc: compile out more code if support for UHS and HS200 is not enabled by Jean-Jacques Hiblot · 7 years ago
  47. cf17789 mmc: make optional the support for eMMC hardware partitioning by Jean-Jacques Hiblot · 7 years ago
  48. f99c2ef mmc: make UHS and HS200 optional by Jean-Jacques Hiblot · 7 years ago
  49. d8e3d42 mmc: convert most of printf() to pr_err() and pr_warn() by Jean-Jacques Hiblot · 7 years ago
  50. f7d5dff mmc: don't use malloc_cache_aligned() by Jean-Jacques Hiblot · 7 years ago
  51. 1de06b9 mmc: fix for old MMCs (below version 4) by Jean-Jacques Hiblot · 7 years ago
  52. 1da8eb5 mmc: all hosts support 1-bit bus width and legacy timings by Jean-Jacques Hiblot · 7 years ago
  53. 00e446f mmc: Fixed a problem with old sd or mmc that do not support High speed by Jean-Jacques Hiblot · 7 years ago
  54. 52d241d mmc: dump card and host capabilities if debug is enabled by Jean-Jacques Hiblot · 7 years ago
  55. 9815e3b mmc: add a library function to send tuning command by Jean-Jacques Hiblot · 7 years ago
  56. bc1e327 mmc: use the right voltage level for MMC DDR and HS200 modes by Jean-Jacques Hiblot · 7 years ago
  57. 83dc422 mmc: Retry some MMC cmds on failure by Kishon Vijay Abraham I · 7 years ago
  58. 01298da mmc: Change mode when switching to a boot partition by Jean-Jacques Hiblot · 7 years ago
  59. 04a2ea2 mmc: disable UHS modes if Vcc cannot be switched on and off by Jean-Jacques Hiblot · 7 years ago
  60. c10b85d mmc: Add support for UHS modes by Jean-Jacques Hiblot · 7 years ago
  61. 634d484 mmc: add HS200 support in MMC core by Kishon Vijay Abraham I · 7 years ago
  62. ec84120 mmc: Add a execute_tuning() callback to the mmc operations. by Kishon Vijay Abraham I · 7 years ago
  63. 2e7410d mmc: disable the mmc clock during power off by Kishon Vijay Abraham I · 7 years ago
  64. 35f6782 mmc: add a new mmc parameter to disable mmc clock by Kishon Vijay Abraham I · 7 years ago
  65. fb7c3be mmc: add power cyle support in mmc core by Kishon Vijay Abraham I · 7 years ago
  66. 318a7a5 mmc: Add a new callback function to perform the 74 clocks cycle sequence by Jean-Jacques Hiblot · 7 years ago
  67. aff5d3c mmc: Enable signal voltage to be selected from mmc core by Kishon Vijay Abraham I · 7 years ago
  68. 2a4d212 mmc: make mmc_set_ios() return status by Kishon Vijay Abraham I · 7 years ago
  69. 3862b85 mmc: refactor MMC startup to make it easier to support new modes by Jean-Jacques Hiblot · 7 years ago
  70. d0c221f mmc: refactor SD startup to make it easier to support new modes by Jean-Jacques Hiblot · 7 years ago
  71. 0503857 mmc: use mmc modes to select the correct bus speed by Jean-Jacques Hiblot · 7 years ago
  72. 4c9d2aa mmc: Add a function to dump the mmc capabilities by Jean-Jacques Hiblot · 7 years ago
  73. 35f9e19 mmc: introduce mmc modes by Jean-Jacques Hiblot · 7 years ago
  74. 7382e69 mmc: add a function to read and test the ext csd (mmc >= 4) by Jean-Jacques Hiblot · 7 years ago
  75. dfda9d8 mmc: make ext_csd part of struct mmc by Jean-Jacques Hiblot · 7 years ago
  76. c744b6f mmc: move the MMC startup for version above v4.0 in a separate function by Jean-Jacques Hiblot · 7 years ago
  77. 8ac8a26 mmc: split mmc_startup() by Jean-Jacques Hiblot · 7 years ago
  78. 06ec045 mmc: dm: get the IO-line and main voltage regulators from the dts by Jean-Jacques Hiblot · 7 years ago
  79. 18e7c8f drivers: mmc: Change buffer type in ALLOC_CACHE_ALIGN_BUFFER macro by Suniel Mahesh · 7 years ago
  80. e7881d8 dm: mmc: Drop CONFIG_DM_MMC_OPS by Simon Glass · 7 years ago
  81. c4d660d dm: mmc: Allow disabling driver model in SPL by Simon Glass · 7 years ago
  82. 05cbeb7 dm: mmc: Don't call board_mmc_power_init() with driver model by Simon Glass · 8 years ago
  83. 166c2b8 mmc: drop unnecessary send_status request by Xu Ziyuan · 8 years ago
  84. 919b485 mmc: Print error code for mmc_complete_init failure by Jagan Teki · 8 years ago
  85. b5b838f mmc: Tinification of the mmc code by Marek Vasut · 8 years ago
  86. ce9eca9 mmc: Fix warning if debug() is not used by Marek Vasut · 8 years ago
  87. cd3d488 mmc: add bkops-enable command by Tomas Melin · 8 years ago
  88. a9003dc mmc: Retry the switch command by Maxime Ripard · 8 years ago
  89. 288db7c mmc: add the device name in debugging message for supplying vmmc by Jaehoon Chung · 8 years ago
  90. 2051aef mmc: introduce mmc_power_init by Peng Fan · 8 years ago
  91. 3697e59 mmc: sd: extracting erase related information from sd status by Peng Fan · 8 years ago
  92. d188b11 mmc: send CMD0 before CMD1 for some MMC cards by Yangbo Lu · 8 years ago
  93. 915ffa5 mmc: use the generic error number by Jaehoon Chung · 8 years ago
  94. 8ca51e5 dm: mmc: Add a way to use driver model for MMC operations by Simon Glass · 8 years ago
  95. c0c76eb mmc: Move tracing code into separate functions by Simon Glass · 8 years ago
  96. c40704f mmc: Move MMC boot code into its own file by Simon Glass · 8 years ago
  97. 5aed4cb dm: mmc: Move non-CONFIG_BLK code into mmc_legacy.c by Simon Glass · 8 years ago
  98. eede897 dm: mmc: Move CONFIG_BLK code into the mmc uclass by Simon Glass · 8 years ago
  99. 7dba0b9 mmc: Add function declarations for mmc_bread() and mmc_switch_part() by Simon Glass · 8 years ago
  100. 1a3619c mmc: add MMC_VERSION_5_1 by Stefan Wahren · 8 years ago