Gitiles
Code Review Sign In
gerrit.devboardsforandroid.linaro.org / platform / external / u-boot / d36b39bf0d1dbe4ef03f7fc1f20b2e52eb90acf5
  1. d36b39b spi: mxc_spi: Fix ECSPI reset handling by Dirk Behme · 12 years ago
  2. 7a3f481 i.MX6: mx6qsabrelite: README: don't pass chip-select to sf probe command by Javier Martinez Canillas · 12 years ago
  3. d8e9eb9 wandboard: Remove CONFIG_SYS_FSL_USDHC_NUM by Fabio Estevam · 12 years ago
  4. 773d56d mx6qsabrelite: Remove duplicate 'mmc dev' by Fabio Estevam · 12 years ago
  5. 6908924 wandboard: Remove duplicate 'mmc dev' by Fabio Estevam · 12 years ago
  6. 38e7007 mx6: Fix get_board_rev() for the mx6 solo case by Fabio Estevam · 12 years ago
  7. 50cea244 mx23_olinuxino: Fix netboot console by Alexandre Pereira da Silva · 12 years ago
  8. aad4659 mmc: i.MX6: fsl_esdhc: Define maximum bus width supported by a board by Abbas Raza · 12 years ago
  9. 2feae93 mx23_olinuxino: Change definitions to use spaces instead of tabs by Otavio Salvador · 12 years ago
  10. d37b334 mx25pdk: Enable imxdi RTC by Benoît Thébaudeau · 12 years ago
  11. 5560028 mx6qsabrelite: README: No need to pass 'u-boot.imx' by Fabio Estevam · 12 years ago
  12. ab461be mx28evk: Introduce a new target for saving env vars to NAND by Fabio Estevam · 12 years ago
  13. 85449db mx6qsabre{sd,auto}: Add boot mode select by Otavio Salvador · 12 years ago
  14. 60bb462 mx6qsabresd: Fix card detection for invalid card id case by Otavio Salvador · 12 years ago
  15. 28ff917 mx6qsabresd: Document the mapping of USDHC[2-4] by Otavio Salvador · 12 years ago
  16. e2d282a Add initial support for Wandboard dual lite and solo. by Fabio Estevam · 12 years ago
  17. 209b571 i.MX6: mx6qsabrelite: discard override of CONFIG_ARP_TIMEOUT by Eric Nelson · 12 years ago
  18. 99e2dc5 i.MX6: Add hdmidet command to detect attached HDMI monitor by Eric Nelson · 12 years ago
  19. a49db3d mx28evk: Disable CONFIG_CMD_I2C by Fabio Estevam · 12 years ago
  20. 982a3c4 imx-common: timer: fix 32-bit overflow by Knut Wohlrab · 12 years ago
  21. 40f1daa configs: mx28evk: Use single-line comments by Fabio Estevam · 12 years ago
  22. b33426c mxs: spl_mem_init: Align DDR2 init with FSL bootlets source by Fabio Estevam · 12 years ago
  23. b27673c Merge branch 'u-boot-tegra/master' into 'u-boot-arm/master' by Albert ARIBAUD · 12 years ago
  24. 6579d15 Merge branch 'u-boot-imx/master' into 'u-boot-arm/master' by Albert ARIBAUD · 12 years ago
  25. 19a0f7f nitrogen: Use unsigned long to specify the total RAM size by fabio.estevam@freescale.com · 12 years ago
  26. 030752a nitrogen6x: Fix RAM size variable by Fabio Estevam · 12 years ago
  27. 477393e Tegra114: Dalmore: Add pad config tables/code based on pinmux code by Tom Warren · 12 years ago
  28. 5647c03 Tegra114: fdt: Move aliases from dtsi to dts file as per other Tegras by Tom Warren · 12 years ago
  29. f31a544 Tegra114: Dalmore: Always use DEFAULT instead of DISABLE for lock bits by Tom Warren · 12 years ago
  30. 36c48be Tegra114: Fix/update GP padcfg register struct by Tom Warren · 12 years ago
  31. b3b6ddf Tegra114: pinmux: Fix bad CAM_MCLK func 3 table entry by Tom Warren · 12 years ago
  32. 11d9c03 ARM: tegra: enable a common set of disk-related commands everywhere by Stephen Warren · 12 years ago
  33. 4123c4e disk: define HAVE_BLOCK_DEVICE if CONFIG_CMD_PART by Stephen Warren · 12 years ago
  34. 2c1af9d disk: define HAVE_BLOCK_DEVICE in a common place by Stephen Warren · 12 years ago
  35. a885f85 ARM: tegra: make bounce buffer option common by Stephen Warren · 12 years ago
  36. ca557b3 Tegra30: MMC: Enable DT MMC driver support for Tegra30 Cardhu boards by Tom Warren · 12 years ago
  37. f4e4e0b Tegra30: mmc: Add Tegra30 SDMMC compatible entry to fdtdec & driver by Tom Warren · 12 years ago
  38. 2d348a1 mmc: Tegra: Add SD bus power/voltage function and MMC pad init call. by Tom Warren · 12 years ago
  39. 190be1f Tegra30: MMC: Add SD bus power-rail and SDMMC pad init routines by Tom Warren · 12 years ago
  40. 38797bc Tegra: MMC: Added/update SDMMC registers/base addresses for T20/T30 by Tom Warren · 12 years ago
  41. 1baa4e7 Tegra30: fdt: Add SDMMC (sdhci) nodes for T30 boards (Cardhu for now) by Tom Warren · 12 years ago
  42. 8ca79b2 Tegra30: Cardhu: Add pad config tables/code based on pinmux code by Tom Warren · 12 years ago
  43. 8b7776b Tegra114: pinmux: Update pinmux tables & code, fix a bug w/SDMMC3 init by Tom Warren · 12 years ago
  44. bb638bb Tegra30: Cardhu: Remove unneeded cardhu.c.mmc file by Tom Warren · 12 years ago
  45. 19a970a Tegra114: fdt: Sync DT nodes with kernel DT files (GPIO, tegra_car) by Tom Warren · 12 years ago
  46. bfcf46d Tegra: Remove unused CONFIG_SYS_CPU_OSC_FREQUENCY define by Tom Warren · 12 years ago
  47. 7ea9c50 Tegra: Add twarren as maintainer for Tegra30 and Tegra114 SoCs by Tom Warren · 12 years ago
  48. 16bb08d ARM: tegra: implement WAR for Tegra114 CPU reset vector by Stephen Warren · 12 years ago
  49. 527519a Tegra30: fdt: Sync DT nodes with kernel DT files (I2C, SPI, GPIO, clock) by Tom Warren · 12 years ago
  50. 73bb244 Tegra: fdt: Remove memreserve line from Cardhu/Seaboard DT files by Tom Warren · 12 years ago
  51. c9aa831 Tegra: MMC: Add DT support to MMC driver for all T20 boards by Tom Warren · 12 years ago
  52. 126685a Tegra: fdt: Add/enhance sdhci (mmc) nodes for all T20 DT files by Tom Warren · 12 years ago
  53. 90b079c Tegra: fdt: tamonten: Add common tamonten.dtsi file from linux by Tom Warren · 12 years ago
  54. 6c5be64 Tegra: fdt: Change /include/ to #include for C preprocessor by Tom Warren · 12 years ago
  55. a7f8b5e Tegra114: I2C: Enable I2C driver on Dalmore E1611 eval board by Tom Warren · 12 years ago
  56. b77c354 Tegra114: fdt: Update DT files with I2C info for T114/Dalmore by Tom Warren · 12 years ago
  57. e32624e Tegra: I2C: Add T114 clock support to tegra_i2c driver by Tom Warren · 12 years ago
  58. 702b872 Tegra114: I2C: Take DVFS out of reset to allow I2C5 (PWR_I2C) to work by Tom Warren · 12 years ago
  59. d7a55e1 tegra: usb: move [start|stop]_port into ehci_hcd_[init|stop] by Lucas Stach · 12 years ago
  60. 7ae18f3 tegra: usb: move implementation into right directory by Lucas Stach · 12 years ago
  61. a63eb6b tegra: usb: various small cleanups by Lucas Stach · 12 years ago
  62. fdb4b9a tegra: usb: move controller init into start_port by Lucas Stach · 12 years ago
  63. a4bdcc3 tegra: usb: remove unneeded function parameter by Lucas Stach · 12 years ago
  64. b0bbab8 tegra: usb: make controller init functions more self contained by Lucas Stach · 12 years ago
  65. 2f3ec34 tegra: usb: set USB_PORTS_MAX to correct value by Lucas Stach · 12 years ago
  66. c44bb3a ARM: tegra: enable some CPU errata workarounds by Stephen Warren · 12 years ago
  67. 0678587 ARM: implement some Cortex-A9 errata workarounds by Stephen Warren · 12 years ago
  68. d67b0d9 Add Boundary Devices Nitrogen6X boards by Eric Nelson · 12 years ago
  69. ef123c5 Refactor linker-generated arrays by Albert ARIBAUD · 12 years ago
  70. 3ebd1cb arm: make __bss_start and __bss_end__ compiler-generated by Albert ARIBAUD · 12 years ago
  71. 65cdd64 Remove linker lists (LGAs) from SPL linker scripts by Albert ARIBAUD · 12 years ago
  72. 2fd34f2 arm: omap: map u_boot_lists section to .sram by Albert ARIBAUD · 12 years ago
  73. 1acba33 Merge branch 'u-boot-atmel/master' into 'u-boot-arm/master' by Albert ARIBAUD · 12 years ago
  74. 08f0533 ARM: sam9x5: fix ethernet pins in MII mode by Jesse Gilles · 12 years ago
  75. fc14fba ARM: at91sam9x5: Using CPU string directly by Bo Shen · 12 years ago
  76. 0c58cfa ARM: at91: change nand flash table by Bo Shen · 12 years ago
  77. f9129fe arm: at91/configs: add bootz to configuration by Nicolas Ferre · 12 years ago
  78. 36873e7 arm: at91/configs: add libfdt to configuration by Nicolas Ferre · 12 years ago
  79. 76b40ab Merge u-boot/master into u-boot-ti/master by Tom Rini · 12 years ago
  80. de62688 arm: dra7xx: Add silicon id support for DRA752 soc by Lokesh Vutla · 12 years ago
  81. 3ef5ebe arm: dra7xx: Add dra7xx_evm build support by Lokesh Vutla · 12 years ago
  82. 687054a arm: dra7xx: Add board files for DRA7XX socs by Lokesh Vutla · 12 years ago
  83. 7831419 arm: dra7xx: Add DDR related data for DRA752 ES1.0 by Lokesh Vutla · 12 years ago
  84. 8b12f17 arm: dra7xx: Add control module changes by Lokesh Vutla · 12 years ago
  85. ea8eff1 arm: dra7xx: clock: Add the dplls data by Lokesh Vutla · 12 years ago
  86. d4e4129 arm: dra7xx: clock: Add the prcm changes by Lokesh Vutla · 12 years ago
  87. d4d986e ARM: OMAP5: srcomp: enable slew rate compensation cells after powerup by Lokesh Vutla · 12 years ago
  88. 9100ede ARM: OMAP5: Add DDR changes required for OMAP543X ES2.0 SOCs by Lokesh Vutla · 12 years ago
  89. 47abc3d ARM: OMAP4/5: clocks: Add the required OPP settings as per the latest addendum by SRICHARAN R · 12 years ago
  90. afc2f9d ARM: OMAP5: clock: Add the prcm register changes required for ES2.0 by SRICHARAN R · 12 years ago
  91. eed7c0f ARM: OMAP5: Add silicon id support for ES2.0 revision. by SRICHARAN R · 12 years ago
  92. ef1697e ARM: OMAP5: Clean up iosettings code by Lokesh Vutla · 12 years ago
  93. c43c833 ARM: OMAP4+: Make control module register structure generic by Lokesh Vutla · 12 years ago
  94. e05a4f1 ARM: OMAP4+: Cleanup emif specific files by Lokesh Vutla · 12 years ago
  95. 3fcdd4a ARM: OMAP4+: Clean up the pmic code by SRICHARAN R · 12 years ago
  96. ee9447b ARM: OMAP4+: Cleanup the clocks layer by SRICHARAN R · 12 years ago
  97. 01b753f ARM: OMAP4+: Change the PRCM structure prototype common for all Socs by SRICHARAN R · 12 years ago
  98. 9ca8bfe ARM: OMAP4+: emif: Detect SDRAM from SDRAM config register by Lokesh Vutla · 12 years ago
  99. 60e6bdc cm_t35: prevent splashimage from being set to a bad value by Nikita Kiryanov · 12 years ago
  100. c088048 lcd: implement a callback for splashimage by Nikita Kiryanov · 12 years ago