- d58c007 microblaze: Add support for run time relocation by Michal Simek · 2 years, 7 months ago
- 07c052b microblaze: Create SYM_ADDR macro to deal with symbols by Michal Simek · 2 years, 7 months ago
- 81169ae microblaze: Add comment about reset location by Michal Simek · 2 years, 7 months ago
- b6fe10a microblaze: Remove _start symbol handling at U-Boot start by Michal Simek · 2 years, 7 months ago
- 986727c microblaze: Remove code around r20 in relocate_code() by Michal Simek · 2 years, 7 months ago
- 3041b51 microblaze: Optimize register usage in relocate_code by Michal Simek · 2 years, 7 months ago
- 532ad5f microblaze: Change stack protection address to new stack address by Michal Simek · 2 years, 7 months ago
- 1918c41 microblaze: Separate code end substraction by Michal Simek · 2 years, 7 months ago
- 10fd6d6 microblaze: Enable REMAKE_ELF by Michal Simek · 2 years, 7 months ago
- 89e81e6 mips: Move endianness selection to arch/Kconfig by Michal Simek · 2 years, 7 months ago
- d896e79 microblaze: Fix typo in exception.c by Michal Simek · 2 years, 7 months ago
- 65a4da9 microblaze: Remove CONFIG_TEXT_BASE from code by Michal Simek · 2 years, 7 months ago
- aa0799e microblaze: Fix early stack allocation by Michal Simek · 2 years, 7 months ago
- 16a1847 microblaze: Fix stack protection behavior by Michal Simek · 2 years, 7 months ago
- 7cf236c microblaze: Switch absolute branches to relative by Michal Simek · 2 years, 7 months ago
- 686c2bb arm64: zynqmp: Fix tps544/u3007 node description by Michal Simek · 2 years, 7 months ago
- 5f5979f arm64: zynqmp: Update tps53681 i2c address by Michal Simek · 2 years, 7 months ago
- 0b0d433 arm64: zynqmp: Fix i2c addresses for vck190 SC by Michal Simek · 2 years, 7 months ago
- b611f7f arm64: zynqmp: Enable DP for kv260-revA board by Michal Simek · 2 years, 7 months ago
- baba22a arm64: zynqmp: Add support for kr260 revA/B boards by Michal Simek · 2 years, 8 months ago
- 254f0c7 arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() by Michal Simek · 2 years, 8 months ago
- 5b060e4 ARM: tegra: XUSB padctl: Add new lines for errors by Peter Robinson · 2 years, 9 months ago
- 4230d68 imx: imx8mq: default select CLK_IMX8MQ by Peng Fan · 2 years, 8 months ago
- 2b64121 armv8: Fix TCR 64-bit writes by Andre Przywara · 2 years, 9 months ago
- 4fe629d Merge https://source.denx.de/u-boot/custodians/u-boot-riscv by Tom Rini · 2 years, 8 months ago
- e7356f0 arm: dts: k3-am642-*: Mark the memory node with u-boot, dm-spl by Georgi Vlaev · 2 years, 8 months ago
- d5af15b riscv: Clean up asm/io.h by Leo Yu-Chi Liang · 2 years, 8 months ago
- 8ac37b4 riscv: remove CONFIG_ARCH_MAP_SYSMEM from io.h by Michal Simek · 2 years, 8 months ago
- 661f540 Merge tag 'xilinx-for-v2022.07-rc4' of https://source.denx.de/u-boot/custodians/u-boot-microblaze by Tom Rini · 2 years, 8 months ago
- 7e0edca Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-sunxi by Tom Rini · 2 years, 8 months ago
- 594f692 xilinx: zynqmp: Wire tee for Multi DTB use cases by Michal Simek · 2 years, 8 months ago
- 821fdfb sunxi: Remove obsolete Kconfig selections by Samuel Holland · 2 years, 9 months ago
- e26ece2 sunxi: board: Fix UART PortF pinmux setup by Andre Przywara · 2 years, 9 months ago
- 1b05136 arm: socfpga: Add the terasic de10-standard board by Humberto Naves · 2 years, 8 months ago
- 2d25f63 arm: gic_v2: Skip gic_init_secure when cpu is not in el3 by Sai Pavan Boddu · 2 years, 9 months ago
- b898f6a powerpc: mpc85xx: Fix CONFIG_OF_SEPARATE support for NOR booting by Pali Rohár · 2 years, 9 months ago
- 004d30c Merge tag 'u-boot-imx-20220523' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx by Tom Rini · 2 years, 8 months ago
- 4d573d5 ARM: dts: imx: Add support for DH electronics i.MX8M Plus DHCOM and PDK2 by Marek Vasut · 2 years, 8 months ago
- d037e79 sunxi: F1C100s: update DT files from Linux by Andre Przywara · 2 years, 9 months ago
- ce00370 ARM: dts: sun50i: H6: Sync from Linux v5.18-rc1 by Samuel Holland · 2 years, 9 months ago
- 7710282 ARM: dts: sun50i: A64: Sync from Linux v5.18-rc1 by Samuel Holland · 2 years, 9 months ago
- 7024755 ARM: dts: sun8i: R40/T3: Sync from Linux v5.18-rc1 by Samuel Holland · 2 years, 9 months ago
- 94539ab ARM: dts: sun8i: V3/V3s/S3: Sync from Linux v5.18-rc1 by Samuel Holland · 2 years, 9 months ago
- 2c59785 ARM: dts: sunxi: H2+/H3/H5: Sync from Linux v5.18-rc1 by Samuel Holland · 2 years, 9 months ago
- 2d648e6 ARM: dts: sun8i: A83T: Sync from Linux v5.18-rc1 by Samuel Holland · 2 years, 9 months ago
- 6f97e02 ARM: dts: sun9i: Sync from Linux v5.18-rc1 by Samuel Holland · 2 years, 9 months ago
- 70f24fa ARM: dts: sunxi: A13/A31/A23/A33: Sync from Linux v5.18-rc1 by Samuel Holland · 2 years, 9 months ago
- 4746694 ARM: dts: sun4i: Sync from Linux v5.18-rc1 by Samuel Holland · 2 years, 9 months ago
- 0605ac4 ARM: dts: sun7i: Sync from Linux v5.18-rc1 by Samuel Holland · 2 years, 9 months ago
- 91407bb ARM: dts: sunxi: Remove unused devicetree headers by Samuel Holland · 2 years, 9 months ago
- c5a4694 ARM: dts: imx: Configure FEC for iMX6QDL DRC02 by Philip Oberfichtner · 2 years, 8 months ago
- 84d9ce5 ARM: dts: imx: Configure FEC for iMX6QDL picoITX by Philip Oberfichtner · 2 years, 8 months ago
- dcb59a1 ARM: dts: imx: Simplify fec node for iMX6QDL DHCOM boards by Philip Oberfichtner · 2 years, 8 months ago
- 874c768 ARM: dts: imx: Migrate iMX6QDL picoITX DTs from Linux by Philip Oberfichtner · 2 years, 8 months ago
- 45964cb ARM: dts: imx: Migrate iMX6QDL DRC02 DTs from Linux by Philip Oberfichtner · 2 years, 8 months ago
- e1e0d9a ARM: imx6: Fix broken DT path in DH board file by Philip Oberfichtner · 2 years, 8 months ago
- 55d1537 bosch: Add initial board support for ACC by Philip Oberfichtner · 2 years, 8 months ago
- 37a7c37 arm: mach-imx: cmd_nandbcb fix bad block handling by Michael Trimarchi · 2 years, 9 months ago
- cad7728 i.MX8ULP: add display_ele_fw_version api by Gaurav Jain · 2 years, 9 months ago
- cda8f87 caam: Fix crash in case caam_jr_probe failed by Ye Li · 2 years, 9 months ago
- a38ed61 imx: imx8mp_evk: enable pinctrl_wdog in SPL by Peng Fan · 2 years, 9 months ago
- ba06ea8 imx: imx8mm_evk: enable pinctrl_wdog in SPL by Peng Fan · 2 years, 9 months ago
- 6d5cc90 imx: imx8mn_evk: enable pinctrl_wdog in SPL by Peng Fan · 2 years, 9 months ago
- 597514e imx: imx8mq-phanbell: enable CONFIG_DM_SERIAL by Peng Fan · 2 years, 9 months ago
- 1d8c0c2 imx: imx8mq-pico: enable CONFIG_DM_SERIAL by Peng Fan · 2 years, 9 months ago
- 23df340 imx: imx8mq-cm: enable CONFIG_DM_SERIAL by Peng Fan · 2 years, 9 months ago
- 56f3888 imx: dts: move common changes to imx8mq-u-boot.dtsi by Peng Fan · 2 years, 9 months ago
- 0cba71c board: gateworks: gw_ventana: add support for GPY111 PHY by Tim Harvey · 2 years, 9 months ago
- a1d675a imx: imx8m: drop uneeded check by Peng Fan · 2 years, 9 months ago
- 5dd9db8 imx: imx8m: add rproc_att by Peng Fan · 2 years, 9 months ago
- 40153df imx: bootaux: get stack from elf file by Peng Fan · 2 years, 9 months ago
- fd60a87 imx: bootaux: add missing newline by Peng Fan · 2 years, 9 months ago
- 56c2dbd imx: bootaux: cleanup code by Peng Fan · 2 years, 9 months ago
- 290ffe5 imx8m: fix reading of DDR4 MR registers by Rasmus Villemoes · 2 years, 9 months ago
- c329f93 ARM: imx: imx31: Introduce and use UART_BASE_ADDR(n) by Marek Vasut · 2 years, 9 months ago
- be23774 ARM: imx: imx27: Introduce and use UART_BASE_ADDR(n) by Marek Vasut · 2 years, 9 months ago
- 52b6b48 ARM: imx: imx8m: Introduce and use UART_BASE_ADDR(n) by Marek Vasut · 2 years, 9 months ago
- ff04a09 ARM: dts: imx: Use 100 kHz I2C2 on Data Modul i.MX8M Mini eDM SBC by Marek Vasut · 2 years, 9 months ago
- d175982 imx8mn/8mp: Allow booting via USB by Fabio Estevam · 2 years, 9 months ago
- 0adf10a ARM: dts: stm32: Configure Buck3 voltage per PMIC NVM on Avenger96 by Marek Vasut · 2 years, 9 months ago
- 11ed38f arm64: zynqmp: Add DT description for si5328 for zcu102/zcu106 by Michal Simek · 2 years, 9 months ago
- d5b9b22 arm64: zynqmp: Add linux,code for fwuen button by Michal Simek · 2 years, 9 months ago
- e4f1d28 arm64: zynqmp: Add PHY description for SGMII on vck190 SC by Michal Simek · 2 years, 9 months ago
- 725badc Revert "arm64: zynqmp: Add zynqmp firmware specific DT nodes" by T Karthik Reddy · 2 years, 9 months ago
- dda356d arm64: zynqmp: Add dmas, gpu, rtc, watchdogs and opp nodes for SOM by Michal Simek · 2 years, 9 months ago
- 07f8e78 arm64: zynqmp: Add pwm-fan node and fix ttc0 pwm-cells property by Vishal Patel · 2 years, 9 months ago
- d59fac2 arm64: zynqmp: Add power domain description for PL by Michal Simek · 2 years, 9 months ago
- 234f8be arm64: zynqmp: Fix opp-table-cpu by Michal Simek · 2 years, 9 months ago
- e7b3900 arm64: zynqmp: Add gpio labels for modepin by Michal Simek · 2 years, 9 months ago
- a4180c3 arm64: zynqmp: Add mode-pin GPIO controller DT node by Piyush Mehta · 2 years, 9 months ago
- 6e38e2e arm64: zynqmp: Set qspi tx-buswidth to 4 by Amit Kumar Mahapatra · 2 years, 9 months ago
- 67bdaa0 arm64: zynqmp: Fix split mode reset functionality by Neal Frager · 2 years, 9 months ago
- 5bb2c55 arm: mvebu: Move internal registers in arch_very_early_init() function by Pali Rohár · 2 years, 9 months ago
- 948da77 arm: Add new config option ARCH_VERY_EARLY_INIT by Pali Rohár · 2 years, 9 months ago
- 1001a0a arm: mvebu: Remove unused ARMADA_64BIT by Chris Packham · 2 years, 9 months ago
- 21e2599 Merge tag 'u-boot-stm32-20220510' of https://source.denx.de/u-boot/custodians/u-boot-stm by Tom Rini · 2 years, 9 months ago
- 35a15bc configs: stm32f746-disco: Migrate SPL flags to defconfig by Patrice Chotard · 2 years, 9 months ago
- 6d4619f ARM: dts: stm32: Move DHCOR BUCK3 VDD 2V9 adjustment to 1V8 DTSI by Marek Vasut · 2 years, 9 months ago
- d6ae183 stm32mp: psci: Retain MCUDIVR, PLL3CR, PLL4CR, MSSCKSELR across suspend by Marek Vasut · 2 years, 9 months ago
- 189ec2f arm: dts: stm32mp15: alignment with v5.18 by Patrick Delaunay · 2 years, 9 months ago