- db8fb2f usb: dwc2: change compatible st,stm32mp1-hsotg to st,stm32mp15-hsotg by Patrick Delaunay · 3 years, 10 months ago
- cec8042 usb: xhci: Fix compare to use physical addresses in xhci_bulk_tx() by Stefan Roese · 3 years, 11 months ago
- 5a5024f usb: xhci-pci: Check for errors from dm_pci_map_bar() by Pali Rohár · 3 years, 10 months ago
- eb885c9 dt-bindings: usb: mtk-xhci: add optional properies to disable ports by Chunfeng Yun · 4 years ago
- 04232f7 usb: xhci-mtk: support option to disable ports by Chunfeng Yun · 4 years ago
- c7182c0 Merge tag 'u-boot-amlogic-20210210' of https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic by Tom Rini · 3 years, 10 months ago
- 8bc7801 board: amlogic: odroid: add runtime detection of the N2/N2+/C4/HC4 variants by Marek Szyprowski · 3 years, 10 months ago
- 4547551 phy: Add Amlogic AXG MIPI PCIe Analog PHY driver by Neil Armstrong · 4 years ago
- 7ef1950 phy: Add Amlogic AXG MIPI D-PHY driver by Neil Armstrong · 4 years ago
- f8da8a8 generic-phy: add configure op by Neil Armstrong · 4 years ago
- afef205 phy: dphy: Add configuration helpers by Neil Armstrong · 4 years ago
- 8398d95 Merge tag 'u-boot-stm32-20210209' of https://gitlab.denx.de/u-boot/custodians/u-boot-stm by Tom Rini · 3 years, 10 months ago
- f050e3f arm: dts: stm32mp15: alignment with v5.11-rc2 by Patrick Delaunay · 3 years, 11 months ago
- 2220c2e ARM: dts: stm32: Fix cosmetic typo: use 'kHz' as kilohertz abbreviation by Fabrice GIRARDOT · 3 years, 11 months ago
- 789d764 clk: stm32mp1: add support of I2C6_K by Patrick Delaunay · 3 years, 10 months ago
- 4363aac pinctrl: stm32: bind only the enabled GPIO subnode by Patrick Delaunay · 3 years, 10 months ago
- 1da4269 pinctrl: stm32: correct management pin display of OTYPE by Patrick Delaunay · 3 years, 10 months ago
- ca5cc31 pinctrl: stmfx: Use PINNAME_SIZE for pin's name size by Patrice Chotard · 3 years, 10 months ago
- 54f5bf3 pinctrl: stmfx: Fix pin configuration issue by Patrice Chotard · 3 years, 10 months ago
- 8c005c7 configs: stm32mp1: enable the fastboot oem command bootbus by Patrick Delaunay · 4 years, 3 months ago
- 6c57154 configs: stm32mp1: enable the fastboot oem command partconf by Patrick Delaunay · 4 years, 3 months ago
- f35ce37 configs: stm32mp1: enable the fastboot oem command format by Jean-Philippe ROMAIN · 4 years, 3 months ago
- 26858a3 configs: stm32mp1: enable fastboot support of eMMC boot partition by Jean-Philippe ROMAIN · 4 years, 3 months ago
- e14d576 Merge git://git.denx.de/u-boot-marvell by Tom Rini · 3 years, 10 months ago
- a10d06a Merge git://git.denx.de/u-boot-fsl-qoriq by Tom Rini · 3 years, 10 months ago
- 8826278 Merge git://git.denx.de/u-boot-sh by Tom Rini · 3 years, 10 months ago
- 461b754 Merge branch 'master' of git://git.denx.de/u-boot-usb by Tom Rini · 3 years, 10 months ago
- 5e7a207 configs: lx2160aqds: enable CMD_GPIO by Biwen Li · 3 years, 10 months ago
- 28e3bfc configs: lx2160ardb: enable CMD_GPIO by Biwen Li · 3 years, 10 months ago
- f5a9b76 configs: ls1088ardb: enable DM_GPIO and CMD_GPIO by Biwen Li · 3 years, 10 months ago
- 010e613 configs: ls1088aqds: enable DM_GPIO and CMD_GPIO by Biwen Li · 3 years, 10 months ago
- bf965a2 configs: ls2088aqds: enable CMD_GPIO by Biwen Li · 3 years, 10 months ago
- 1fd573e configs: ls2088ardb: enable DM_GPIO and CMD_GPIO by Biwen Li · 3 years, 10 months ago
- 327c539 configs: ls1046aqds: enable CMD_GPIO by Biwen Li · 3 years, 10 months ago
- ece1fc4 configs: ls1046ardb: enable CMD_GPIO by Biwen Li · 3 years, 10 months ago
- 9c7ae9a configs: ls1043ardb: enable CMD_GPIO by Biwen Li · 3 years, 10 months ago
- 614d28b configs: ls1043aqds: enable CMD_GPIO by Biwen Li · 3 years, 10 months ago
- 230b5a6 configs: ls1028ardb: enable CMD_GPIO by Biwen Li · 3 years, 10 months ago
- dd5186c configs: ls1028aqds: enable CMD_GPIO by Biwen Li · 3 years, 10 months ago
- 7379bd5 configs: ls1021atwr: enable CMD_GPIO by Biwen Li · 3 years, 10 months ago
- d268833 configs: ls1021aqds: enable CMD_GPIO by Biwen Li · 3 years, 10 months ago
- fb35072 configs: ls1012ardb: enable CMD_GPIO by Biwen Li · 3 years, 10 months ago
- 0c6dd90 configs: ls1012afrwy: enable CMD_GPIO by Biwen Li · 3 years, 10 months ago
- d58ea63 configs: ls1021aqds: enable CONFIG_MPC8XXX_GPIO by Biwen Li · 3 years, 10 months ago
- 7c1f095 configs: ls1021atwr: enable CONFIG_MPC8XXX_GPIO by Biwen Li · 3 years, 10 months ago
- 0077d71 configs: ls1046a: enable MPC8XXX_GPIO by Biwen Li · 3 years, 10 months ago
- 2a95d7c configs: lx2160a: enable CONFIG_MPC8XXX_GPIO by Biwen Li · 3 years, 10 months ago
- 04f26d6 configs: ls208xa: enable CONFIG_MPC8XXX_GPIO by Biwen Li · 3 years, 10 months ago
- 97e8120 configs: ls1088a: enable CONFIG_MPC8XXX_GPIO by Biwen Li · 3 years, 10 months ago
- 90281f4 configs: ls1028a: enable CONFIG_MPC8XXX_GPIO by Biwen Li · 3 years, 10 months ago
- be7b6d5 configs: ls1043a: enable CONFIG_MPC8XXX_GPIO by Biwen Li · 3 years, 10 months ago
- c5d0bd5 configs: ls1012a: enable CONFIG_MPC8XXX_GPIO by Biwen Li · 3 years, 10 months ago
- eeeab27 arm64: dts: ls208xa: add gpio node by Biwen Li · 3 years, 10 months ago
- d62cbea arm64: dts: ls1088a: add gpio node by Biwen Li · 3 years, 10 months ago
- b7ddedf arm64: dts: ls1046a: add gpio node by Biwen Li · 3 years, 10 months ago
- b609f1a arm64: dts: ls1043a: add gpio node by Biwen Li · 3 years, 10 months ago
- f9428d7 arm64: dts: ls1028a: add gpio node by Biwen Li · 3 years, 10 months ago
- 5609300 arm64: dts: ls1012a: add gpio node by Biwen Li · 3 years, 10 months ago
- 2b3393c arm: dts: ls1021a: add gpio node by Biwen Li · 3 years, 10 months ago
- 7811880 gpio: mpc8xxx_gpio: Fix for litte endian by Biwen Li · 3 years, 10 months ago
- c9cd2a3 configs: T1042: Drop the CONFIG_VIDEO by Hou Zhiqiang · 3 years, 10 months ago
- 43d1d39 mpc8xxx: fsl_pamu: Update data type in config_pamu by Priyanka Jain · 3 years, 10 months ago
- 19dba8b armv7: ls102xa: Enable I-Cache to speed up the boot time by Hou Zhiqiang · 3 years, 10 months ago
- a1f57c3 board/km: move km i2c deblock declarations to a km/common.h by Aleksandar Gerasimovski · 3 years, 10 months ago
- d167667 pci: kconfig: layerscape: Change LX2162A PCIe node compatible string by Hou Zhiqiang · 3 years, 10 months ago
- 5841073 pci: layerscape: Remove the shadow SVR definitions by Hou Zhiqiang · 3 years, 10 months ago
- fd20097 spi: fsl_qspi: apply the same settings for LS1088 as LS208x by Mathew McBride · 3 years, 10 months ago
- 6b4eb60 spi: fsl_qspi: Ensure width is respected in spi-mem operations by Mathew McBride · 3 years, 10 months ago
- af6266c mem: spi-mem: add declaration for spi_mem_default_supports_op by Mathew McBride · 3 years, 10 months ago
- 37bfd9c PowerPC: keymile: Add support for kmcent2 board by Niel Fourie · 3 years, 10 months ago
- df86d32 keymile: common: update to set_env_hex(), fix "pram" radix by Niel Fourie · 3 years, 10 months ago
- c1a215b PowerPC: dts: Pulled in kmcent2 dts files from Linux 5.10 by Niel Fourie · 3 years, 10 months ago
- e081d94 board/km/common: fix pnvramaddr and varaddr by Aleksandar Gerasimovski · 3 years, 10 months ago
- d141f4b keymile: common: qrio: print QRIO id and revision number by Aleksandar Gerasimovski · 3 years, 11 months ago
- b99cc27 board: keymile: common: fix qrio compilation for arm by Aleksandar Gerasimovski · 3 years, 11 months ago
- 67477bd armv8: lx2: SVR_SOC_VER: Mask CAN_FD and security bit by Wasim Khan · 3 years, 11 months ago
- 3dbc47c armv8: ls1028a: fix stream id allocation by Nipun Gupta · 3 years, 11 months ago
- 805b242 board: sl28: add SATA support by Michael Walle · 3 years, 11 months ago
- b463010 board: sl28: add network variant 2 support by Michael Walle · 3 years, 11 months ago
- 4029d35 board: sl28: add network variant 1 support by Michael Walle · 3 years, 11 months ago
- feed900 board: sl28: move ethernet aliases to variant specific dtsi by Michael Walle · 3 years, 11 months ago
- 440b28a net: eqos: Reduce the MDIO wait time by Ye Li · 4 years ago
- 905c8e6 armv8: dts: fsl-lx2162a: add dspi node into qds dts by Zhao Qiang · 4 years ago
- cbfa8f7 armv8: lx2162aqds: disable non existing pcie controllers by Wasim Khan · 4 years ago
- 166e40b configs: ls1088aqds: add COMMON_ENV to fix distroboot by Biwen Li · 4 years ago
- 64a0fb4 net: memac_phy: add a timeout to MDIO operations by Ioana Ciornei · 4 years ago
- 46fdf76 board: kontron: disable flash unlock all by Michael Walle · 4 years ago
- 5d867bc mtd: spi-nor: add unlock all config option by Michael Walle · 4 years ago
- 24a0f8c mmc: mv_sdhci: parse device-tree entry by Baruch Siach · 3 years, 10 months ago
- 6e27484 arm: mvebu: Espressobin: Set the maximum slave SPI speed to 40MHz by Konstantin Porotchkin · 3 years, 10 months ago
- 3277153 cmd: mvebu/bubt: Fix default options in help by Pali Rohár · 3 years, 10 months ago
- 61b7042 arm: mvebu: theadorable: Set deephasis bit in PCIe configs very early by Stefan Roese · 3 years, 10 months ago
- 54504de arm: mvebu: theadorable: Enhance "pcie" test cmd to check link width/speed by Stefan Roese · 3 years, 10 months ago
- 6a2fa28 pci: pci_mvebu: Disable config access to PCI host bridge ports by Stefan Roese · 3 years, 10 months ago
- 44be835 arm: mvebu: Espressobin: Set default value for $ethNaddr env variable by Pali Rohár · 4 years ago
- c4df0f6 arm: mvebu: Espressobin: Set default value for $fdtfile env variable by Pali Rohár · 4 years ago
- 93f4048 env: Allow to set default_environment[] from board code via compile option DEFAULT_ENV_IS_RW by Pali Rohár · 4 years ago
- 0099dfd ARM: rmobile: Add Beacon EmbeddedWorks RZG2H Dev Kit by Adam Ford · 3 years, 10 months ago
- 6001b49 ARM: rmobile: Add Beacon EmbeddedWorks RZG2N Dev Kit by Adam Ford · 3 years, 10 months ago
- 2b6cf2e arm: dts: r8a774b1: Import DTS queued for Linux 5.12-rc1 by Adam Ford · 3 years, 10 months ago