1. 4946775 Coding Style cleanup; update CHANGELOG, prepare -rc1 by Wolfgang Denk · 15 years ago
  2. 8003c36 arm926ejs: 8-byte align stack to avoid LDRD/STRD problems by Simon Kagstrom · 15 years ago
  3. 9df20ce arm: Correct build with CONFIG_SYS_HUSH_PARSER set by Simon Kagstrom · 15 years ago
  4. 23b8098 Add support for Eukrea CPU9260/CPU9G20 SBC by Tom Rix · 15 years ago
  5. 7908c97 TI DaVinci: DM646x: Initial Support for DM646x SOC by Sandeep Paulraj · 15 years ago
  6. 3ea43ff Merge branch 'master' of git://git.denx.de/u-boot-arm by Wolfgang Denk · 15 years ago
  7. cf46309 ARM: DaVinci: DaVinci DM365 SOC specific code by Sandeep Paulraj · 15 years ago
  8. d72871e arm: Remove -fno-strict-aliasing by Kumar Gala · 15 years ago
  9. 49d2cb4 arm: Kirkwood: add SYSRSTn Duration Counter Support by Prafulla Wadaskar · 15 years ago
  10. 9453967 Add support for the Calao SBC35-A9G20 board by Albin Tonnerre · 15 years ago
  11. 10bc241 imx27lite: add support for imx27lite board from LogicPD by Ilya Yanok · 15 years ago
  12. f772acf ARM: compiler options cleanup - improve tool chain support by Wolfgang Denk · 15 years ago
  13. ba3dbaf mxc-mmc: sdhc host driver for MX2 and MX3 proccessor by Ilya Yanok · 15 years ago
  14. 3c448e6 Add AT91SAM9260 to at91's lowlevel_init.S by Eric Benard · 15 years ago
  15. 60cbfbf arm nomadik: add gpio support by Alessandro Rubini · 15 years ago
  16. fcd3c87 Make include/common.h usable by assembler code by Wolfgang Denk · 15 years ago
  17. 0b23fb3 fec_mxc: driver for FEC ethernet controller on i.MX27 by Ilya Yanok · 15 years ago
  18. 5ccc2d9 at91: Introduction of at91sam9g10 SOC. by Sedji Gaouaou · 15 years ago
  19. 22ee647 at91: Introduction of at91sam9g45 SOC. by Sedji Gaouaou · 15 years ago
  20. 8e5e9b9 Coding style cleanup; update CHANGELOG by Wolfgang Denk · 15 years ago
  21. 78eabb9 arm: Kirkwood: arch specific updated for ehci-Kirkwood driver support by Prafulla Wadaskar · 15 years ago
  22. 095a460 arm nomadik: use 1000 as HZ value and rewrite timer code by Alessandro Rubini · 15 years ago
  23. fd14c41 arm nomadik: cleanup reset by Alessandro Rubini · 15 years ago
  24. 45627fc at91: Add CAN init function by Daniel Gorsulowski · 15 years ago
  25. 4efb77d arm: Kirkwood: Basic SOCs support by Prafulla Wadaskar · 15 years ago
  26. 1dc4da7 mx27: basic cpu support by Ilya Yanok · 15 years ago
  27. 8096c51 at91: unify nor boot support by Jean-Christophe PLAGNIOL-VILLARD · 15 years ago
  28. 8453587 Switched davinci_emac Ethernet driver to use newer API by Ben Warren · 15 years ago
  29. 09cdd1b Moved Davinci Ethernet driver to drivers/net by Ben Warren · 15 years ago
  30. b240358 at91: move cpu info print to cpu by Jean-Christophe PLAGNIOL-VILLARD · 15 years ago
  31. 5bb59b3 at91: extract reset from timer by Jean-Christophe PLAGNIOL-VILLARD · 15 years ago
  32. ad7e8aac arm: remove cpu_init by Jean-Christophe PLAGNIOL-VILLARD · 16 years ago
  33. c358d9c3 arm: unify interrupt init by Jean-Christophe PLAGNIOL-VILLARD · 16 years ago
  34. 10a451c arm: unify linker script by Jean-Christophe PLAGNIOL-VILLARD · 16 years ago
  35. 9475c63 afeb9260: fix macb device init by Jean-Christophe PLAGNIOL-VILLARD · 16 years ago
  36. 2ae0f35 ARM DaVinci: Reset with watchdog enabled by Thomas Lange · 16 years ago
  37. 1699da6 at91: regroup IP hw init in one file per soc by Jean-Christophe PLAGNIOL-VILLARD · 16 years ago
  38. 53925ac ARM DaVinci:Consolidate common u-boot.lds by Sandeep Paulraj · 16 years ago
  39. 2907798 arm920/926/926: remove non needed header by Jean-Christophe PLAGNIOL-VILLARD · 16 years ago
  40. 7a4f511 davinci: display correct clock info by David Brownell · 16 years ago
  41. b54384e arm: timer and interrupt init rework by Jean-Christophe PLAGNIOL-VILLARD · 16 years ago
  42. f1d944e davinci: add basic dm355/dm350/dm335 support by David Brownell · 16 years ago
  43. bd36fdc davinci: fix dm644x buglets by David Brownell · 16 years ago
  44. f790436 davinci: split out some dm644x-specific bits from psc by David Brownell · 16 years ago
  45. 48ef572 davinci: cpu-specific build uses conditional make syntax by David Brownell · 16 years ago
  46. 7b7808a davinci: move psc support board-->cpu by David Brownell · 16 years ago
  47. 84f7411 DaVinci now respects SKIP_LOWLEVEL_INIT by David Brownell · 16 years ago
  48. a53c997 at91/cpu.c: add missing Copyright & GPL header by Jean-Christophe PLAGNIOL-VILLARD · 15 years ago
  49. 792a09e Fix e-mail address of Gary Jennejohn. by Detlev Zundel · 16 years ago
  50. c63254e AFEB9260 network fix by Sergey Lapin · 16 years ago
  51. 6b2beb5 at91: remove lowlevel_init.S by Jean-Christophe PLAGNIOL-VILLARD · 16 years ago
  52. 0ee7a31 Update CHANGELOG; minor coding style cleanup. by Wolfgang Denk · 16 years ago
  53. a1e5f93 at91: fixed plla calc when no USB support is active by Daniel Gorsulowski · 16 years ago
  54. 6ebff36 at91sam9/at91cap: fix CONFIG_SYS_HZ to 1000 by Jean-Christophe PLAGNIOL-VILLARD · 16 years ago
  55. f0a2c7b at91: add support for the PM9263 board of Ronetix GmbH by Ilko Iliev · 16 years ago
  56. dc39ae9 at91sam9/at91cap: improve clock framework by Jean-Christophe PLAGNIOL-VILLARD · 16 years ago
  57. ab29823 arm: unify reset command by Jean-Christophe PLAGNIOL-VILLARD · 16 years ago
  58. b3acb6c arm: clean cache management by Jean-Christophe PLAGNIOL-VILLARD · 16 years ago
  59. 677e62f arm: update co-processor 15 access by Jean-Christophe PLAGNIOL-VILLARD · 16 years ago
  60. 4758ebd at91: move dataflash spi driver to drivers/spi by Jean-Christophe PLAGNIOL-VILLARD · 16 years ago
  61. 2b7178a at91: move usb driver to drivers/usb by Jean-Christophe PLAGNIOL-VILLARD · 16 years ago
  62. 90a92a7 at91: rename DATAFLASH_MMC_SELECT to CONFIG_DATAFLASH_MMC_SELECT by Jean-Christophe PLAGNIOL-VILLARD · 16 years ago
  63. a47492a at91sam9/at91cap: spi init add hardware chip select support by Jean-Christophe PLAGNIOL-VILLARD · 16 years ago
  64. 81472d8 OMAP: rename timer divisor by Ladislav Michl · 16 years ago
  65. 942ba99 davinci: move i2c driver to drivers/i2c by Jean-Christophe PLAGNIOL-VILLARD · 16 years ago
  66. ee4f3e2 davinci: move nand driver to drivers/mtd/nand by Jean-Christophe PLAGNIOL-VILLARD · 16 years ago
  67. df486b1 at91: Support for the at91sam9g20 : Atmel 400Mhz ARM 926ej-s SOC. by Nicolas Ferre · 16 years ago
  68. e2c0476 at91sam9/at91cap: move common macb initialisation to cpu by Jean-Christophe PLAGNIOL-VILLARD · 16 years ago
  69. f3f91f8 at91sam9/at91cap: move common usb host initialisation to cpu by Jean-Christophe PLAGNIOL-VILLARD · 16 years ago
  70. a484b00 at91sam9/at91cap: move common led management to cpu by Jean-Christophe PLAGNIOL-VILLARD · 16 years ago
  71. 7ebafb7 at91sam9/at91cap: move common spi initialisation to cpu by Jean-Christophe PLAGNIOL-VILLARD · 16 years ago
  72. 1332a2a at91sam9/at91cap: move common serial initialisation to cpu by Jean-Christophe PLAGNIOL-VILLARD · 16 years ago
  73. f62fb99 Fix all linker script to handle all rodata sections by Trent Piepho · 16 years ago
  74. d5254f1 Initial support for Nomadik 8815 development board by Alessandro Rubini · 16 years ago
  75. ecf5f07 i2c: merge all i2c_reg_read() and i2c_reg_write() into inline functions by Timur Tabi · 16 years ago
  76. 3aed3aa Fix new found CFG_ by Jean-Christophe PLAGNIOL-VILLARD · 16 years ago
  77. 0e0c862 Remove compiler warning: target CPU does not support interworking by Sergei Poselenov · 16 years ago
  78. 83ad179 Remove redundant armv4 flag from arm926ejs compile flags by Remy Bohmer · 16 years ago
  79. 3e0cda0 AT91: Enable PLLB for USB by Stelian Pop · 16 years ago
  80. 9b827cf Align end of bss by 4 bytes by Selvamuthukumar · 16 years ago
  81. e352495 ARM926EJ-S: relocate OMAP specific 'cpuinfo.c' into OMAP directory by Roman Mashak · 16 years ago
  82. 6d0f6bc rename CFG_ macros to CONFIG_SYS by Jean-Christophe PLAGNIOL-VILLARD · 16 years ago
  83. 508eb85 Merge branch 'master' of git://git.denx.de/u-boot-nand-flash by Wolfgang Denk · 16 years ago
  84. b5b0344 ARM DaVinci: Remove duplicate code in cpu/arm926ejs/davinci/dp83848.c by Hugo Villeneuve · 16 years ago
  85. 9b05aa7 ARM DaVinci: Fix broken HW ECC for large page NAND. by Hugo Villeneuve · 16 years ago
  86. 3ae071e Moved initialization of Ethernet controllers on Atmel AT91 to board_eth_init() by Ben Warren · 16 years ago
  87. fcaac58 ARM DaVinci: Changing function names for EMAC driver by Sandeep Paulraj · 16 years ago
  88. e8f1207 Correct ARM Versatile Timer Initialization by Gururaja Hebbar K R · 16 years ago
  89. e394116 ARM DaVinci: Removed redundant NAND initialization code. by Hugo Villeneuve · 16 years ago
  90. b3fb663 ARM DaVinci: Fix compilation error with new MTD code. by Hugo Villeneuve · 16 years ago
  91. cc4a0ce drivers/mtd/nand: Move conditional compilation to Makefile by Jean-Christophe PLAGNIOL-VILLARD · 16 years ago
  92. 8641ff2 Merge branch 'master' of git://www.denx.de/git/u-boot-at91 by Wolfgang Denk · 16 years ago
  93. 8ed2f5f at91: move arch-at91sam9 to arch-at91 by Jean-Christophe PLAGNIOL-VILLARD · 16 years ago
  94. fe56a27 NAND: Davinci driver updates by Sergey Kubushyn · 17 years ago
  95. 5e1dae5 Fixing coding style issues by William Juul · 17 years ago
  96. 4cbb651 Remove white space at end. by William Juul · 17 years ago
  97. cfa460a Update MTD to that of Linux 2.6.22.1 by William Juul · 17 years ago
  98. 85e5808 ARM DaVinci: Remove extern phy_t declaration by moving code to proper place by Hugo Villeneuve · 16 years ago
  99. c15947d ARM: Fix for broken compilation when defining CONFIG_CMD_ELF by Hugo Villeneuve · 16 years ago
  100. 4023453 Merge branch 'master' of git://www.denx.de/git/u-boot-nand-flash by Wolfgang Denk · 16 years ago