- e975906 spl: mmc: Rename spl_boot_mode() to spl_mmc_boot_mode() by Harald Seiler · 4 years, 8 months ago
- 4a66d4e mmc: tmio: sdhi: Implement get_b_max function by Marek Vasut · 4 years, 8 months ago
- 145429a mmc: Add option to adjust b_max before long read by Marek Vasut · 4 years, 8 months ago
- d2661d8 mmc: tmio: sdhi: Use bounce buffer to avoid DMA limitations by Marek Vasut · 4 years, 8 months ago
- 80a624f ARM: rmobile: Increase malloc area size by Marek Vasut · 4 years, 8 months ago
- 8074ffe common: bouncebuf: Permit passing custom alignment check function by Marek Vasut · 4 years, 8 months ago
- 453d213 mmc: adjust Kconfig for mmc sub-commands by Heinrich Schuchardt · 4 years, 8 months ago
- 29617ca drivers: mmc: iproc_sdhci: move host.mmc init before sdhci_setup_cfg by Rayagonda Kokatanur · 4 years, 8 months ago
- 7a65b8b drivers: mmc: iproc_sdhci: fix compilation warning by Rayagonda Kokatanur · 4 years, 8 months ago
- 2bb02b1 drivers: mmc: iproc_sdhci: enable broken R1B response quirk by Bharat Kumar Reddy Gooty · 4 years, 8 months ago
- d5b8500 drivers: mmc: iproc_sdhci: fix possible memory leak by Bharat Kumar Reddy Gooty · 4 years, 8 months ago
- 0469d84 cmd: mmc: provide boot area protection command by Heinrich Schuchardt · 4 years, 8 months ago
- d5210e4 cmd: mmc: display write protect state of boot partition by Heinrich Schuchardt · 4 years, 8 months ago
- 1601ea2 mmc: export mmc_send_ext_csd() by Heinrich Schuchardt · 4 years, 8 months ago
- 9abfe33 mmc: EXT_CSD registers for write protection by Heinrich Schuchardt · 4 years, 8 months ago
- 902af10 mmc: tmio: sdhi: Add DMA transfer address alignment check at writing by Hiroyuki Yokoyama · 4 years, 9 months ago
- e4837da Merge tag 'u-boot-amlogic-20200420' of https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic by Tom Rini · 4 years, 7 months ago
- 62c5954 Merge tag 'ti-v2020.07-rc1' of https://gitlab.denx.de/u-boot/custodians/u-boot-ti by Tom Rini · 4 years, 7 months ago
- d1bbf83 Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx by Tom Rini · 4 years, 7 months ago
- 699a33b configs: libretech-s912-pc: Enable USB gadget with Mass Storage function by Neil Armstrong · 4 years, 8 months ago
- 572a806 configs: libretech-s905d-pc: Enable USB gadget with Mass Storage function by Neil Armstrong · 4 years, 8 months ago
- 2a367d2 configs: khadas-vim: Enable USB gadget with Mass Storage function by Neil Armstrong · 4 years, 8 months ago
- 269ac20 configs: khadas-vim2: Enable USB gadget with Mass Storage function by Neil Armstrong · 4 years, 8 months ago
- 7033dbf configs: libretech-ac: Enable USB gadget with Mass Storage function by Neil Armstrong · 4 years, 8 months ago
- af71bdc configs: libretech-cc: Enable USB gadget with Mass Storage function by Neil Armstrong · 4 years, 8 months ago
- a19e8a0 arm: dts: meson-gxl: Add USB Gadget nodes for U-Boot by Neil Armstrong · 4 years, 8 months ago
- dc999e5 arm: meson-gx: add board_usb_init()/cleanup() for USB gadget by Neil Armstrong · 4 years, 8 months ago
- 838c0af phy: meson-gxl-usb: add set_mode call to force switch to peripheral mode by Neil Armstrong · 4 years, 8 months ago
- c2b9aa9 generic-phy: add generic_phy_get_by_node() by Neil Armstrong · 4 years, 8 months ago
- e7510d4 arm: mach-k3: Use JTAD_ID register for device identification by Lokesh Vutla · 4 years, 7 months ago
- 931edc6 Add support for i.MXRT1020-EVK board by Giulio Benetti · 4 years, 9 months ago
- 7787330 dt-bindings: pinctrl: add i.MXRT1020 pins definition by Giulio Benetti · 4 years, 9 months ago
- 63d4dc5 ARM: dts: imxrt1020: add dtsi file by Giulio Benetti · 4 years, 9 months ago
- 07cae0d Add i.MXRT1020 support by Giulio Benetti · 4 years, 9 months ago
- ac4e761 clk: imx: add i.IMXRT1020 clk driver by Giulio Benetti · 4 years, 9 months ago
- 7c0fbf2 imx: pmic: Set proper pmic name for iMX53 HSC|DDC boards by Lukasz Majewski · 4 years, 9 months ago
- 90a3cff config: imx: Enable CONFIG_PHY_FIXED on HSC and DDC i.MX53 boards by Lukasz Majewski · 4 years, 9 months ago
- 4a45f40 dts: imx: Add fixed-link property to HSC and DDC (imx53) devices by Lukasz Majewski · 4 years, 9 months ago
- 2c86271 ARM: imx6: DHCOM i.MX6 PDK: Fix usb-otg VBUS regulator by Harald Seiler · 4 years, 8 months ago
- 15df6b3 ARM: imx6: DHCOM i.MX6 PDK: Convert to DM_ETH by Harald Seiler · 4 years, 8 months ago
- fe2f432 wandboard: Print the board version in board_late_init() by Fabio Estevam · 4 years, 7 months ago
- 06f3558 wandboard: Remove CONFIG_DISPLAY_BOARDINFO_LATE by Fabio Estevam · 4 years, 7 months ago
- b8e74fc wandboard: Do not print error when PMIC is not present by Fabio Estevam · 4 years, 7 months ago
- 417ea63 pmic: pfuze100: Change error message level to debug by Fabio Estevam · 4 years, 7 months ago
- 4c13a4d wandboard: Fix version detection for mx6q/mx6dl revD1 by Fabio Estevam · 4 years, 7 months ago
- 84eea6a configs: imxrt1050-evk: temporary disable DCACHE by Giulio Benetti · 4 years, 8 months ago
- 7839c71 configs: imxrt1050-evk: enable video support/console by Giulio Benetti · 4 years, 8 months ago
- 587e098 arch: arm: dts: imxrt1050-evk: add lcdif node by Giulio Benetti · 4 years, 8 months ago
- 22aa286 ARM: dts: imxrt1050: allow this dtsi file to be compiled in Linux by Giulio Benetti · 4 years, 8 months ago
- bb8af5f ARM: dts: i.mxrt1050: add lcdif node by Giulio Benetti · 4 years, 8 months ago
- 7b40b91 imxrt1050_evk: add 16bpp video support if video layer enabled by Giulio Benetti · 4 years, 8 months ago
- 76f6bcd video: mxsfb: enable setting ENABLE negative polarity by Giulio Benetti · 4 years, 8 months ago
- 7c30d76 video: mxsfb: enable setting PIXDATA on negative edge by Giulio Benetti · 4 years, 8 months ago
- 606668a video: mxsfb: enable setting VSYNC negative polarity by Giulio Benetti · 4 years, 8 months ago
- e121e00 video: mxsfb: enable setting HSYNC negative polarity by Giulio Benetti · 4 years, 8 months ago
- abda0a5 video: mxsfb: refactor for using display_timings by Giulio Benetti · 4 years, 8 months ago
- aa04570 video: mxsfb: add support for i.MXRT by Giulio Benetti · 4 years, 8 months ago
- ceb4ffc video: mxsfb: add support for DM CLK by Giulio Benetti · 4 years, 8 months ago
- 92a6836 sunxi: display: use common video_ctfb_mode_to_display_timing() by Giulio Benetti · 4 years, 8 months ago
- 10374da videomodes: add helper function to convert from ctfb to display_timing by Giulio Benetti · 4 years, 8 months ago
- ecd8497 clk: imx: clk-imxrt1050: add set_parent() callback by Giulio Benetti · 4 years, 8 months ago
- caac71b clk: imx: clk-imxrt1050: setup PLL5 for video in non-SPL by Giulio Benetti · 4 years, 8 months ago
- d303f9c clk: imx: clk-imxrt1050: fix typo in clock name "video:" by Giulio Benetti · 4 years, 8 months ago
- 8cefbe9 clk: imx: pllv3: add enable_bit by Giulio Benetti · 4 years, 8 months ago
- a5ed4fa colibri_imx6: enable relocation of fdt and initrd by Igor Opaniuk · 4 years, 8 months ago
- f8a4e0c colibri-imx6ull: enable relocation of fdt and initrd by Igor Opaniuk · 4 years, 8 months ago
- 9df7736 apalis_imx6: enable relocation of fdt and initrd by Igor Opaniuk · 4 years, 8 months ago
- c7081c4 colibri_imx7: enable relocation of fdt and initrd by Igor Opaniuk · 4 years, 8 months ago
- 90ca13f colibri_vf: enable relocation of fdt and initrd by Igor Opaniuk · 4 years, 8 months ago
- 2c28c4a verdin-imx8mm: add nfsboot wrapper to env by Igor Opaniuk · 4 years, 8 months ago
- 47d430b imx8mm_evk: adjust dram size in case bl32 is used by Igor Opaniuk · 4 years, 8 months ago
- f8ae0bc verdin-imx8mm: adjust dram size in case bl32 is used by Igor Opaniuk · 4 years, 8 months ago
- 168fff2 imx8qxp_mek: Start with USDHC2 unpowered by Fabio Estevam · 4 years, 8 months ago
- 8f660ba board: tqc: tqma6_mba6: switch to device model by Michael Krummsdorf · 4 years, 8 months ago
- b7c1447 board: tqc: tqma6: hw init code disabled for device model by Michael Krummsdorf · 4 years, 8 months ago
- e7ae6b5 configs: tqma6x_mba6x: update default configs for device model by Michael Krummsdorf · 4 years, 8 months ago
- 45fde2a board: tqc: tqma6: mba6: apply default Kconfig for device model by Michael Krummsdorf · 4 years, 8 months ago
- 41231da arch: arm: tqma6: apply default Kconfig for device model by Michael Krummsdorf · 4 years, 8 months ago
- acdbe52 arm: dt: imx6qdl: add tqma6[qdl] som on mba6 mainboard by Michael Krummsdorf · 4 years, 8 months ago
- ac1f2b4 tqma6: resurrect support by supplying correct SYS_TEXT_BASE by Markus Niebel · 4 years, 8 months ago
- 7794d88 arm: imx6: configure NoC on i.MX6DQP by Bernhard Messerklinger · 4 years, 9 months ago
- a0448e5 mx6ulz_14x14_evk: Disable CONFIG_NET by Fabio Estevam · 4 years, 10 months ago
- 03279b7 mx6ullevk: Enable Ethernet support by Fabio Estevam · 4 years, 10 months ago
- b0b525a mx6ul_evk: Remove FEC related board code by Fabio Estevam · 4 years, 10 months ago
- ba83ed5 mx6ul_evk: Move CONFIG_FEC_MXC to defconfig by Fabio Estevam · 4 years, 10 months ago
- cbc81b7 mx7ulp: Only enable LDO if it is not already enabled by Fabio Estevam · 4 years, 10 months ago
- 2cfdb3b mx7ulp: Remove duplicated definitions by Fabio Estevam · 4 years, 10 months ago
- 8d5d3bc Merge branch '2020-04-16-master-imports' by Tom Rini · 4 years, 7 months ago
- 65c141e board_f.c: Ensure 16 alignment of start_addr_sp and reserved memory by Patrick Delaunay · 4 years, 9 months ago
- 6de2992 arm: set the relocated gd with gd->new_gd by Patrick Delaunay · 4 years, 9 months ago
- 15ac0c7 Revert "stm32mp1: remove the imply BOOTSTAGE" by Patrick Delaunay · 4 years, 9 months ago
- a665108 board_f.c: Ensure gd->new_bootstage alignment by Patrice Chotard · 4 years, 9 months ago
- 9d82cbd arm: imx: update reference to README.mxc_hab by Patrick Delaunay · 4 years, 9 months ago
- 3256afb doc: device-tree-bindings: update reference to binding directory by Patrick Delaunay · 4 years, 9 months ago
- add8391 doc: update reference to README.board by Patrick Delaunay · 4 years, 9 months ago
- a0cd1e1 doc: update reference to README.imx8image by Patrick Delaunay · 4 years, 9 months ago
- b09e28f doc: update reference to README.imximage by Patrick Delaunay · 4 years, 9 months ago
- 480e411 Kconfig: update reference to README.x86 by Patrick Delaunay · 4 years, 9 months ago
- 24bcaec README: update reference to *.README by Patrick Delaunay · 4 years, 9 months ago
- e5301ba test: pinmux: add pincontrol-gpio for pin configuration by Patrick Delaunay · 4 years, 11 months ago