- eaf6ea6 Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h by Tom Rini · 2 years, 6 months ago
- be131ad stih410-b2260: Switch to using GENERATED_GBL_DATA_SIZE by Tom Rini · 2 years, 6 months ago
- 4c97c8c powerpc: Switch to using CONFIG_SYS_INIT_SP_OFFSET from CONFIG_SYS_GBL_DATA_OFFSET by Tom Rini · 2 years, 6 months ago
- 06ddcfc m68k: Stop using CONFIG_SYS_GBL_DATA_OFFSET by Tom Rini · 2 years, 6 months ago
- 68eed5b arm: Stop using CONFIG_SYS_GBL_DATA_OFFSET by Tom Rini · 2 years, 6 months ago
- 85758d8 arm: Use CONFIG_SPL_STACK or CONFIG_SYS_INIT_SP_ADDR directly. by Tom Rini · 2 years, 6 months ago
- 3b2979e mvebu: Use CONFIG_SPL_STACK + 4 directly for bootparam location by Tom Rini · 2 years, 6 months ago
- 90f0819 Convert CONFIG_SPL_COMMON_INIT_DDR to Kconfig by Tom Rini · 2 years, 6 months ago
- 6074a53 ppc / layerscape: Clean up CONFIG_SYS_CCSR_DO_NOT_RELOCATE usage by Tom Rini · 2 years, 6 months ago
- 66bda09 Convert CONFIG_SPL_SYS_MALLOC_SIMPLE to Kconfig by Tom Rini · 2 years, 6 months ago
- 9b5f9ae Convert CONFIG_SPL_BSS_MAX_SIZE et al to Kconfig by Tom Rini · 2 years, 6 months ago
- ca8a329 Convert CONFIG_SPL_PAD_TO et al to Kconfig by Tom Rini · 2 years, 6 months ago
- 4a11e34 Convert CONFIG_SPL_FS_LOAD_PAYLOAD_NAME et al to Kconfig by Tom Rini · 2 years, 6 months ago
- bab1b35 Convert CONFIG_SPL_NAND_RAW_ONLY et al to Kconfig by Tom Rini · 2 years, 6 months ago
- b35316f Convert CONFIG_SPL_INIT_MINIMAL et al to Kconfig by Tom Rini · 2 years, 6 months ago
- e247514 Convert CONFIG_SYS_CFI_FLASH_STATUS_POLL to Kconfig by Tom Rini · 2 years, 6 months ago
- 2f57139 Convert CONFIG_SYS_FLASH_CFI_WIDTH to Kconfig by Tom Rini · 2 years, 6 months ago
- d498c67 spl: Remove CONFIG_SPL_SATA_BOOT_DEVICE by Tom Rini · 2 years, 6 months ago
- aa473e7 fsl-layerscape: Remove CONFIG_SPL_PBL_PAD by Tom Rini · 2 years, 6 months ago
- 2179dc0 P1010RDB: Remove CONFIG_SPL_NAND_MINIMAL by Tom Rini · 2 years, 6 months ago
- a581eba spl: Remove CONFIG_SPL_BOARD_LOAD_IMAGE by Tom Rini · 2 years, 6 months ago
- 12f613c arm: omap2plus: Move CONFIG_SYS_PTV out of CONFIG namespace by Tom Rini · 2 years, 6 months ago
- 167f699 Convert CONFIG_SYS_BOOTPARAMS_LEN to Kconfig by Tom Rini · 2 years, 6 months ago
- b7fbdc5 Convert CONFIG_HUSH_INIT_VAR to Kconfig by Tom Rini · 2 years, 6 months ago
- 6889412 Convert CONFIG_SYS_BARGSIZE to Kconfig by Tom Rini · 2 years, 6 months ago
- d31466b Convert CONFIG_SYS_CBSIZE to Kconfig by Tom Rini · 2 years, 6 months ago
- d0ee7f2 Convert CONFIG_SYS_PBSIZE to Kconfig by Tom Rini · 2 years, 6 months ago
- cf49358 Convert CONFIG_SYS_MAXARGS to Kconfig by Tom Rini · 2 years, 6 months ago
- 4fe629d Merge https://source.denx.de/u-boot/custodians/u-boot-riscv by Tom Rini · 2 years, 6 months ago
- c544b28 riscv: qemu: Set kernel_comp_addr_r for compressed kernel by Bin Meng · 2 years, 6 months ago
- ce78c4c riscv: sifive: unleashed: Set kernel_comp_addr_r for compressed kernel by Bin Meng · 2 years, 6 months ago
- b84d24c riscv: sifive: unmatched: Adjust for big ramdisk image by Bin Meng · 2 years, 6 months ago
- 661f540 Merge tag 'xilinx-for-v2022.07-rc4' of https://source.denx.de/u-boot/custodians/u-boot-microblaze by Tom Rini · 2 years, 6 months ago
- 1b05136 arm: socfpga: Add the terasic de10-standard board by Humberto Naves · 2 years, 6 months ago
- 4d573d5 ARM: dts: imx: Add support for DH electronics i.MX8M Plus DHCOM and PDK2 by Marek Vasut · 2 years, 6 months ago
- 6ecd1d6 ARM: imx6: Remove CONFIG_FEC_MXC_PHYADDR from DH header by Philip Oberfichtner · 2 years, 6 months ago
- fbc6b14 imx: imx8mp_rsb3720a1: convert to DM_SERIAL by Peng Fan · 2 years, 6 months ago
- 55d1537 bosch: Add initial board support for ACC by Philip Oberfichtner · 2 years, 6 months ago
- 6ea118e imx: imx8mm_edm_sbc: Enable SPL_DM_SERIAL by Peng Fan · 2 years, 6 months ago
- 2232d5f imx: imx8mm_mx8menlo: Enable DM_SERIAL by Peng Fan · 2 years, 6 months ago
- 8e3cc42 configs: remove FEC_QUIRK_ENET_MAC from imx8m configs by Tim Harvey · 2 years, 7 months ago
- 110998f configs: imx8mp_venice: add FEC_QUIRK_ENET_MAC by Tim Harvey · 2 years, 7 months ago
- 400eebf configs: imx8m{m, n}_venice: remove unneeded CONFIG_FEC_MXC_PHYADDR by Tim Harvey · 2 years, 7 months ago
- be23774 ARM: imx: imx27: Introduce and use UART_BASE_ADDR(n) by Marek Vasut · 2 years, 7 months ago
- 52b6b48 ARM: imx: imx8m: Introduce and use UART_BASE_ADDR(n) by Marek Vasut · 2 years, 7 months ago
- 10c29fa xilinx: zynqmp: Do not guard SPL_FS_LOAD_PAYLOAD_NAME by SDHCI driver by Michal Simek · 2 years, 6 months ago
- 54a54a6 Convert CONFIG_MTD_CONCAT to Kconfig by Chris Packham · 2 years, 6 months ago
- 21e2599 Merge tag 'u-boot-stm32-20220510' of https://source.denx.de/u-boot/custodians/u-boot-stm by Tom Rini · 2 years, 6 months ago
- 7aa4b45 configs: stm32f746-disco: use CONFIG_DEFAULT_DEVICE_TREE as fdtfile by Patrice Chotard · 2 years, 7 months ago
- 480995b configs: stm32f746-disco: Concatenate spl and u-boot binaries by Patrice Chotard · 2 years, 7 months ago
- 5367b67 configs: stm32mp1: Add support for baudrates higher than 115200 for st-link by Patrick Delaunay · 2 years, 7 months ago
- 806c4dd configs: stm32mp1: set the console variable for extlinux.conf by Patrick Delaunay · 2 years, 7 months ago
- c7484ce Nokia RX-51: Convert to CONFIG_DM_SERIAL by Pali Rohár · 2 years, 7 months ago
- 56717a1 include: configs: am**x/j721e/j721s2_evm.h: Move the stack pointer init address in arm64 by Aswath Govindraju · 2 years, 7 months ago
- 8433554 arm: nuvoton: Add support for Nuvoton NPCM750 BMC by Jim Liu · 2 years, 7 months ago
- 78c0175 mips: octeon: ebb7304: Enable ethernet support by Stefan Roese · 2 years, 7 months ago
- 1142463 mips: octeon: octeon_common.h: Move init SP because of increased image size by Stefan Roese · 2 years, 7 months ago
- dbd2a38 arm: kirkwood: nsa310s: Use Marvell uclass mvgbe and PHY driver for DM Ethernet by Tony Dinh · 2 years, 7 months ago
- b8b91a0 arm: mvebu: turris_mox: Add NVMe and SCSI to boot targets by Pali Rohár · 2 years, 7 months ago
- 0ddc1e5 arm: mvebu: turris_omnia: Add NVMe to boot targets by Pali Rohár · 2 years, 7 months ago
- 9efc5b7 arm: mvebu: turris_omnia: Always enable MMC, SCSI and USB boot targets by Pali Rohár · 2 years, 7 months ago
- 31f8801 arm: mvebu: turris_omnia: Define CONFIG_ETHPRIME instead of ethact= ENV by Pali Rohár · 2 years, 7 months ago
- 8b2b125 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-mpc85xx by Tom Rini · 2 years, 7 months ago
- c7d0295 board: freescale: p1_p2_rdb_pc: Define SW macros for lower and upper NOR banks by Pali Rohár · 2 years, 7 months ago
- 6496a89 board: freescale: p1_p2_rdb_pc: Use named macros for i2c bus num and address by Pali Rohár · 2 years, 7 months ago
- ac56055 board: freescale: p1_p2_rdb_pc: Fix env $vscfw_addr by Pali Rohár · 2 years, 7 months ago
- 4aceaec board: freescale: p1_p2_rdb_pc: Detect both P2020 SD switch configurations by Pali Rohár · 2 years, 7 months ago
- ab37df9 powerpc: mpc85xx: Remove duplicate u-boot-nand.lds by Pali Rohár · 2 years, 7 months ago
- 6669291 include: configs: at91/sam: remove stray #ifdef/#else by Eugen Hristev · 2 years, 7 months ago
- b07a022 board: Add sam9x60_curiosity support by Durai Manickam KR · 2 years, 7 months ago
- 1123213 nds32: Remove the architecture by Tom Rini · 2 years, 7 months ago
- b416df3 configs: Layerscape: Remove the 'fdt_addr' env by Hou Zhiqiang · 2 years, 7 months ago
- 6e2af64 Merge tag 'u-boot-imx-20220422' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx by Tom Rini · 2 years, 7 months ago
- d173b10 ARM: imx: imx8mn-evk: change environment address variables by Heiko Thiery · 2 years, 9 months ago
- f5f3906 configs: imx: drop IMX_FEC_BASE by Peng Fan · 2 years, 7 months ago
- c5b9bf5 include/configs: drop COUNTER_FREQUENCY by Peng Fan · 2 years, 7 months ago
- e50f66e Merge https://source.denx.de/u-boot/custodians/u-boot-marvell by Tom Rini · 2 years, 7 months ago
- adfaa42 configs: drop CONFIG_MMCROOT by Peng Fan · 2 years, 7 months ago
- a95cd68 board: ti: am335x: Add support for BBE Extended WiFi by Paul Barker · 2 years, 7 months ago
- cde7264 board: ti: am335x: Add BBE Lite support by Paul Barker · 2 years, 7 months ago
- c82622a configs: phycore_imx8mm/p: drop unused SDHC macro by Peng Fan · 2 years, 7 months ago
- ec04c5a configs: imx8mm/n_venice: drop unused SDHC macro by Peng Fan · 2 years, 7 months ago
- d3af060 configs: verdin-imx8m: drop unused SDHC macro by Peng Fan · 2 years, 7 months ago
- ee5e8ee configs: imx8qm/qxp_evk: drop unused SDHC macro by Peng Fan · 2 years, 7 months ago
- 0f82da2 configs: mx7dsabresd: drop unused SDHC macro by Peng Fan · 2 years, 7 months ago
- 228e947 configs: mx6sxsabresd: drop CONFIG_SYS_FSL_USDHC_NUM by Peng Fan · 2 years, 7 months ago
- 893152f configs: imx8mn_evk: drop unused SDHC macro by Peng Fan · 2 years, 7 months ago
- 42d56ca configs: imx8mp_evk: drop unused SDHC macro by Peng Fan · 2 years, 7 months ago
- ff234d7 configs: imx8mm_evk: drop unused SDHC macro by Peng Fan · 2 years, 7 months ago
- 2e26a76 configs: ge_bx50v3: remove CONFIG_PCIE_IMX_POWER_GPIO by Ian Ray · 2 years, 7 months ago
- ac47bd2 arm: kirkwood: Sheevaplug : Use Marvell uclass mvgbe and PHY driver for Ethernet by Tony Dinh · 2 years, 7 months ago
- fc102c8 board: toradex: drop colibri pxa270 support by Marcel Ziswiler · 2 years, 7 months ago
- 2395625 board: gateworks: venice: add imx8mp-venice-gw740x support by Tim Harvey · 2 years, 7 months ago
- 61cf225 board: gateworks: gw_ventana: use comomn GSC driver by Tim Harvey · 2 years, 7 months ago
- c574736 configs: imx8m{m,n}_venice_defconfig: add usb support by Tim Harvey · 2 years, 7 months ago
- fd5c717 imx8m{m,n}_venice: update env memory layout by Tim Harvey · 2 years, 7 months ago
- 3f7d518 configs: tdx: apalis/colibri_imx6: use preboot as well by Marcel Ziswiler · 2 years, 7 months ago
- 405c97f configs: tdx: apalis_imx6: drop hw v1.0 support by Marcel Ziswiler · 2 years, 7 months ago
- 1410cba toradex: drop legacy nfsboot script by Igor Opaniuk · 2 years, 7 months ago
- 1377a77 toradex: set default dhcp distroboot scriptname by Igor Opaniuk · 2 years, 7 months ago