- 058fb9f acpi: Move MCFG implementation to common lib by Moritz Fischer · 2 years, 9 months ago
- ab2ffe7 arch: x86: lib: acpi_table: Fix MCFG entries by Moritz Fischer · 2 years, 9 months ago
- ebc87d0 sandbox: fix build failure with musl and SDL by Heinrich Schuchardt · 2 years, 10 months ago
- 3609e1d dts: automatically build necessary .dtb files by Rasmus Villemoes · 2 years, 10 months ago
- edca8cf Convert CONFIG_SCSI_AHCI_PLAT et al to Kconfig by Simon Glass · 2 years, 10 months ago
- ce30e3f scsi: Drop CONFIG_SYS_SCSI_MAX_DEVICE by Simon Glass · 2 years, 10 months ago
- d2da54b Convert CONFIG_SYS_IDE_MAXBUS et al to Kconfig by Simon Glass · 2 years, 10 months ago
- d67f9e3 mips: Avoid using config_enabled() directly by Simon Glass · 2 years, 10 months ago
- 5c86a8f imx: Don't define __ASSEMBLY__ in source files by Simon Glass · 2 years, 10 months ago
- a94d70a arm: dts: k3-j721e: Add support for multilink PCIe + QSGMII by Aswath Govindraju · 2 years, 10 months ago
- 3c1d89f arm: dts: k3-j721e: Add support for PLL_CMNLC clocks in SerDes0 by Aswath Govindraju · 2 years, 10 months ago
- 57b02b7 dts: am57xx*: Add ipu early boot DT changes by Keerthy · 2 years, 10 months ago
- 5717294 arm: dts: dra7*/am57xx-idk-evm-u-boot: Add ipu early boot DT changes by Keerthy · 2 years, 10 months ago
- 5329c54 arm: dts: dra7: Add ipu and related nodes by Keerthy · 2 years, 10 months ago
- 0bfc701 dts: dra7-ipu-common-early-boot.dtsi: Add all the ipu early boot related nodes by Keerthy · 2 years, 10 months ago
- b071a07 drivers: misc: Makefile: Enable fs_loader compilation at SPL Level by Keerthy · 2 years, 10 months ago
- 0197909 arm: mach-omap2: load/start remoteproc IPU1/IPU2 by Keerthy · 2 years, 10 months ago
- 81fb00b arm: dts: k3-j721s2-ddr: Add DDR support by Aswath Govindraju · 2 years, 10 months ago
- 626a2fd arm: dts: k3-j721s2: Add r5 specific dt support by Aswath Govindraju · 2 years, 10 months ago
- a9d8cf2 arm: dts: Add support for A72 specific J721S2 Common Processor Board by Aswath Govindraju · 2 years, 10 months ago
- 05d441a arm: dts: Add initial support for J721S2 System on Module by Aswath Govindraju · 2 years, 10 months ago
- 2bab70e arm: dts: Add initial support for J721S2 SoC by Aswath Govindraju · 2 years, 10 months ago
- 681023a arm: K3: Add basic support for J721S2 SoC definition by David Huang · 2 years, 10 months ago
- 2bc2f81 board: toradex: add verdin imx8m plus support by Marcel Ziswiler · 2 years, 9 months ago
- 16c7369 board: kontron: pitx-imx8m: Add Kontron pitx-imx8m board support by Heiko Thiery · 2 years, 10 months ago
- be63dc7 mach-imx: iomux-v3: add a define for the SION bit by Angus Ainslie · 2 years, 9 months ago
- 881c8a6 arm: dts: imx8mq kernel dts updates by Angus Ainslie · 2 years, 9 months ago
- 0c9c5d2 mx6: crm_regs: drop BM_ANADIG_ANA_MISC0_REFTOP_VBGADJ by Dario Binacchi · 2 years, 10 months ago
- c1af358 imx: mx6ull: fix REFTOP_VBGADJ setting by Dario Binacchi · 2 years, 10 months ago
- 0e0ae73 arm64: dts: imx8mm: Add the pcie support by Richard Zhu · 2 years, 10 months ago
- f1cc436 arm64: dts: imx8mm: Add the pcie phy support by Richard Zhu · 2 years, 10 months ago
- 6c3373b arm: dts: add imx8mp-rsb3720-a1 dts file by Ying-Chun Liu (PaulLiu) · 2 years, 10 months ago
- dd4b3ca arm64: dts: imx8mm: Add missing MX8MM_IOMUXC_NAND_READY_B_SD3_RESET_B by Marek Vasut · 2 years, 10 months ago
- 9aac5c3 arm64: dts: imx8mm/q: Fix pad control of SD1_DATA0 by Oliver Stäbler · 2 years, 10 months ago
- 2c9d2ac ARM: imx: imx8m: Add PLL 1.4 GHz, 1.5 GHz, 1.6 GHz, 1.8 GHz options by Marek Vasut · 2 years, 10 months ago
- 66e90be ARM: imx: imx8m: Align PLL 1.2 GHz option with Linux by Marek Vasut · 2 years, 10 months ago
- 1289ff7 imx8m: lock id_swap_bypass bit in tzc380 enable by Andrey Zhizhikin · 2 years, 10 months ago
- 2f95456 imx: imx8mm_beacon: Enable USB by Adam Ford · 2 years, 10 months ago
- d81c6a9 arm: dts: imx8mm-beacon: Resync dtsi with Kernel 5.17-rc1 by Adam Ford · 2 years, 10 months ago
- 94588ff imx8mn-ddr4-evk: generate single bootable image by Andrey Zhizhikin · 2 years, 10 months ago
- ea4e938 arm64: dts: imx8mq-u-boot.dtsi: improve odd blob-ext naming by Patrick Wildt · 2 years, 10 months ago
- 49f5565 arm64: dts: imx8mm-u-boot.dtsi: use dash for node names by Patrick Wildt · 2 years, 10 months ago
- 553216f arm64: dts: imx8mq-u-boot.dtsi: explicitly add spl filename by Patrick Wildt · 2 years, 10 months ago
- 440c7d1 arm64: dts: imx8mq-u-boot.dtsi: alphabetically re-order properties by Patrick Wildt · 2 years, 10 months ago
- 1bcda4e imx: imx8mm: imx8mm-kontron-n801x-s: add common board u-boot.dtsi by Heiko Thiery · 2 years, 10 months ago
- 02737ac cmd_nandbcb: Support secondary boot address of imx8mn by Michael Trimarchi · 2 years, 10 months ago
- 0be742d imx: Enable ACTLR.SMP in SPL for i.MX6/7 by Sven Schwermer · 2 years, 10 months ago
- 8ed378f ARM: dts: imx: Synchronize iMX6QDL DHCOM PDK2 DTs with Linux 5.15.12 by Marek Vasut · 2 years, 11 months ago
- 2ab0b52 ARM: dts: imx: Add labels to remaining anatop regulators by Marek Vasut · 2 years, 11 months ago
- e2a63608 arm: dts: Enable support for USB on XEA (imx28) board by Lukasz Majewski · 2 years, 11 months ago
- 1e7212e xea: dts: Update the SPI-NOR flash memory partitions description by Lukasz Majewski · 2 years, 11 months ago
- 014315b spl: Provide more space to be used for storing SPL on imx28 OCRAM by Lukasz Majewski · 2 years, 11 months ago
- e195550 ARM: dts: imx6ull: Use the correct name for ESAI_TX0 by Fabio Estevam · 2 years, 11 months ago
- 12f9b4d mx6: Use imx6_src_get_boot_mode() to check boot device by Harald Seiler · 3 years ago
- ca27227 ARM: dts: imx6q-dhcom: Use 1G ethernet on the PDK2 board by Christoph Niedermaier · 3 years ago
- c4c1ed6 imx8mn_var_som: Add support for Variscite VAR-SOM-MX8M-NANO board by Ariel D'Alessandro · 3 years ago
- 4821074 colibri-imx8x: add on-module gpio expander fxl6408 by Oleksandr Suvorov · 3 years ago
- 556523b arm: imx8m: imx8mm-cl-iot-gate: detect extension board by Ying-Chun Liu (PaulLiu) · 3 years ago
- 27ea1c5 arm: dts: imx8mm-cl-iot-gate: add Compulab's ied overlays by Ying-Chun Liu (PaulLiu) · 3 years ago
- 6293b73 imx8ulp: implement to obtain the SoC current temperature by Alice Guo · 3 years ago
- dc77d0f imx8ulp: clock: Handle the DDRLOCKED when setting DDR clock by Ye Li · 3 years ago
- 0f9b10a imx8ulp: clock: Support to enable/disable the ADC1 clock by Alice Guo · 3 years ago
- 484b306 imx8ulp: Update ethernet mac to get from fuse by Ye Li · 3 years ago
- 3b32010 imx8ulp: clock: Support to reset DCNano and MIPI DSI by Ye Li · 3 years ago
- 55a7e78 imx8ulp: clock: Reset DDR controller before clock enable by Ye Li · 3 years ago
- 9c7fbeb imx8ulp: Workaround LPOSC_TRIM fuse load issue by Ye Li · 3 years ago
- 112b4ca imx8ulp: Remove freescale name from CPU revision by Ye Li · 3 years ago
- bd8b673 imx8ulp: Fix DCNANO QoS setting by Ye Li · 3 years ago
- 16062f9 imx8ulp: Set DCNANO read QoS on NIC_LPAV to highest by Ye Li · 3 years ago
- 9dde390 imx8ulp_evk: Control LPI2C0 PCA6416 and TPM0 for display by Ye Li · 3 years ago
- 608ed20 imx8ulp: rdc: allow A35 access flexspi0 mem by Ye Li · 3 years ago
- 829e06b imx8ulp: clock: Add MIPI DSI clock and DCNano clock by Ye Li · 3 years ago
- 5ff18da imx8ulp: clock: Support LPAV clocks in cgc and pcc by Ye Li · 3 years ago
- 99de168 imx8ulp: assign PXP/HIFI4/EPDC to APD domain by Peng Fan · 3 years ago
- d563d29 arm: imx8ulp: Allocate LPAV resources to AP domain by Ye Li · 3 years ago
- 961ac78 imx8ulp: soc: Check the DBD_EN fuse before setting RDC by Ye Li · 3 years ago
- 89ca5a7 ARM: imx8m: support env in fat and ext4 by Ricardo Salveti · 3 years, 1 month ago
- af60263 imx: nandbcb: Fix printf format in write_fcb by Pali Rohár · 3 years, 1 month ago
- 91f27f3 mxs: power: Change sequence of enabling DCDC switches by Lukasz Majewski · 3 years, 1 month ago
- cd0ecb3 imx8mm-venice-gw7902: fix M2_RST# gpio pinmux by Tim Harvey · 3 years, 1 month ago
- 8b71576 mx7ulp_com: add support for SPL by Ricardo Salveti · 3 years, 2 months ago
- 498eedc mx7ulp: select soc features by Oleksandr Suvorov · 3 years, 2 months ago
- 6ff55bc arm: imx: imx8mq: add support to get values for more clocks by Heiko Thiery · 3 years, 2 months ago
- 3aaabfe Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-sunxi by Tom Rini · 2 years, 9 months ago
- ce2b6c4 ARM: dts: suniv: Add device tree files and bindings for F1C100s by Icenowy Zheng · 2 years, 10 months ago
- cfe673c mach-sunxi: Add support for SUNIV architecture by Icenowy Zheng · 2 years, 10 months ago
- 645ee3c sunxi: Add F1C100s DRAM initial support by Icenowy Zheng · 2 years, 10 months ago
- 5d35f0f ARM: sunxi: Add clock and uart to sunxi headers by Icenowy Zheng · 2 years, 10 months ago
- 88998f7 arm: arm926ej-s: Add sunxi code by Icenowy Zheng · 2 years, 10 months ago
- 0d4377f mach-sunxi: Move timer code to mach folder by Jesse Taube · 2 years, 10 months ago
- 508f75a arm: arm926ej-s: start.S: port save_boot_params support from armv7 code by Icenowy Zheng · 2 years, 10 months ago
- b8cd7f4 armv8: remove no longer needed lowlevel_init.S by Andre Przywara · 2 years, 10 months ago
- 534b82a sunxi: move early "SRAM setup" into separate file by Andre Przywara · 2 years, 10 months ago
- 2564fce sunxi: move Cortex SMPEN setting into start.S by Andre Przywara · 2 years, 10 months ago
- 5bc4cd0 sunxi: move non-essential code out of s_init() by Andre Przywara · 2 years, 10 months ago
- 68f0896 armv8: start.S: remove CONFIG_SYS_RESET_SCTRL code by Andre Przywara · 2 years, 10 months ago
- 22eb7ba armv8: spl: Fix build with LINUX_KERNEL_IMAGE_HEADER by Alper Nebi Yasak · 2 years, 10 months ago
- 681adaa arm: dts: ls1028a-qds: declare in-band autoneg for Ethernet ports by Vladimir Oltean · 2 years, 10 months ago
- bee9fd2 arm: dts: ls1028a-rdb: sync device tree with Linux by Vladimir Oltean · 2 years, 10 months ago
- 50c49ef arm: dts: ls1028a-rdb: enable PCIe controllers from U-Boot dtsi by Vladimir Oltean · 2 years, 10 months ago