Gitiles
Code Review Sign In
gerrit.devboardsforandroid.linaro.org / platform / external / u-boot / ef5f1979ffd85bfbf5b32faf823e2f1129208c1e / arch / arm
  1. ef5f197 ARM: rmobile: Zap checkboard on Gen3 by Marek Vasut · 7 years ago
  2. f2b2bd6 ARM: rmobile: Unify R8A7795 and R8A7796 in rmobile Makefile by Marek Vasut · 7 years ago
  3. a523af6 ARM: rmobile: Unify memory map for RCar Gen3 by Marek Vasut · 7 years ago
  4. 262e915 ARM: rmobile: Add PRR CPU ID macros by Marek Vasut · 7 years ago
  5. 654f37d ARM: rmobile: Dispose of r8a779x.h for Gen3 by Marek Vasut · 7 years ago
  6. 5271dda ARM: rmobile: Zap Gen3 PFC tables by Marek Vasut · 7 years ago
  7. d4bde6f ARM: rmobile: Drop SDHI address macros from Gen3 by Marek Vasut · 7 years ago
  8. 5d1b875 ARM: rmobile: Fix eMMC signal voltage on ULCB by Marek Vasut · 7 years ago
  9. b06c46d Merge tag 'xilinx-for-v2018.01' of git://www.denx.de/git/u-boot-microblaze by Tom Rini · 7 years ago
  10. b8d4497 arm: zynq: Change Zynq/ZynqMP Kconfig description by Michal Simek · 7 years ago
  11. 310995d mtd: zynq: nand: Move board_nand_init() function to board.c by Wilson Lee · 7 years ago
  12. 3082944 arm: zynq: Use unsigned type with comparison with ARRAY_SIZE by Michal Simek · 7 years ago
  13. 11ea6f5 arm: zynq: Add support for EMIT_WRITE operation by Michal Simek · 7 years ago
  14. f290748 arm: zynq: Add ps7GetSiliconVersion() to ps7_spl_init by Michal Simek · 7 years ago
  15. c0823a7 arm: zynq: Move common ps7_init* initialization to arch code by Michal Simek · 7 years ago
  16. f0b619e arm: zynq: Move ps7_* to separate file by Michal Simek · 7 years ago
  17. 96b96ad arm: zynq: Add missing ps7_post_config declaration by Michal Simek · 7 years ago
  18. b443fb4 ARM: dts: uniphier: Sync with Linux 4.15-rc1 by Masahiro Yamada · 7 years ago
  19. 10c62f4 ARM: uniphier: remove XIRQ pin settings by Masahiro Yamada · 7 years ago
  20. eadd95a ARM: uniphier: remove IRQ settings by Masahiro Yamada · 7 years ago
  21. ed3986c bitops: collect BIT macros to include/linux/bitops.h by Masahiro Yamada · 7 years ago
  22. fe16aa4 arm64: zynqmp: Enable watchdog by default by Shubhrajyoti Datta · 8 years ago
  23. b10255f arm64: zynqmp: Add note about si5328 interrupt by Michal Simek · 7 years ago
  24. 8861dcf arm64: zynqmp: usb: Correct IOMMU node for making SMMU work with USB by Anurag Kumar Vulisha · 7 years ago
  25. a41bd46 arm64: zynqmp: Remove clock setting from dtsi by Michal Simek · 7 years ago
  26. 397a08a arm64: zynqmp: Uncomment snps,quirk-frame-length-adjustment flag in dwc3 by Anurag Kumar Vulisha · 8 years ago
  27. 2ef9866 arm64: zynqmp: Add USB OTG interrupts support in dt by Manish Narani · 8 years ago
  28. f7346ef arm64: zynqmp: Enabled CCI support for USB by Manish Narani · 8 years ago
  29. 8e5a4e6 arm64: zynqmp: Add support reading SoC revision using nvmem driver in dwc3 by Anurag Kumar Vulisha · 8 years ago
  30. b0c5520 arm64: zynqmp: Move nodes which have no reg property out of bus by Michal Simek · 7 years ago
  31. 795ebc0 arm64: zynqmp: dt: Add AMS node by Michal Simek · 7 years ago
  32. 5e3c90d arm64: zynqmp: sdhci: set host quirk2 for no 1.8V support for 1.0 silicon by Manish Narani · 7 years ago
  33. 0aada39 arm64: zynqmp: Use reset controller framework for asserting/de-asserting reset by Anurag Kumar Vulisha · 8 years ago
  34. 98ad47b arm64: zynqmp: Add reset-controller support in serdes driver by Anurag Kumar Vulisha · 8 years ago
  35. 3940bca arm64: zynqmp: Remove tx_termination_fix detection on silicon v1 by Michal Simek · 8 years ago
  36. 0d87c4f arm64: zynqmp: Add support for zynqmp nvmem firmware driver by Nava kishore Manne · 8 years ago
  37. ae9775f arm64: zynqmp: Add support for zcu102 1.0 rev by Michal Simek · 7 years ago
  38. 9c77cb7 arm64: zynqmp: Update device tree for pinmux by Michal Simek · 7 years ago
  39. 6507be7 arm64: zynqmp: Remove local-mac-address from dtsi file by Michal Simek · 8 years ago
  40. 5fe0326 arm64: zynqmp: Use SPDX license with dc4 by Michal Simek · 8 years ago
  41. b9f7ede arm64: zynqmp: Remove leading 0s from mtd table for spi flashes by Michal Simek · 7 years ago
  42. 816019a arm64: zynqmp: Add missing alias for gem0 for ep108 by Michal Simek · 8 years ago
  43. f811eca arm64: zynqmp: zcu102: Modifying GTR lane-0 to PCIe by Bharat Kumar Gogada · 8 years ago
  44. d801ce5 arm64: zynqmp: Update device tree for gpio by Chirag Parekh · 8 years ago
  45. 582ee92 arm64: zynqmp: Add revB string to compatible string by Michal Simek · 7 years ago
  46. 23b34d1 arm64: zynqmp: Use revision in dts file description by Michal Simek · 7 years ago
  47. 5f9b083 arm64: zynqmp: PM: Specify power domains for DP related nodes by Jyotheeswar Reddy Mutthareddyvari · 8 years ago
  48. 10f2a29 arm64: zynqmp: disable smmu by Naga Sureshkumar Relli · 8 years ago
  49. 4d9d698 arm64: zynqmp: rtc: Add calibration by Nava kishore Manne · 8 years ago
  50. 110d06b arm64: zynqmp: Add SMMU support for SATA IP by Anurag Kumar Vulisha · 7 years ago
  51. ec2b2d4 arm64: dts: xilinx: fix PCI bus dtc warnings by Rob Herring · 8 years ago
  52. 0b33e0b1 arm64: zynqmp: Add missing gpio property to dtsi by Michal Simek · 7 years ago
  53. 834ec8e arm64: zynqmp: Update the GPU address size by Hyun Kwon · 7 years ago
  54. 59206dd arm64: zynqmp: Add clock name for GPU by Madhurkiran Harikrishnan · 8 years ago
  55. 7689dce arm64: zynqmp: Label whole PL part as fpga_full region by Nava kishore Manne · 7 years ago
  56. 6db82e0 arm64: zynqmp: Fix broken architected timer interrupt trigger by Michal Simek · 8 years ago
  57. 19ee402 arm64: zynqmp: PM: Add IRQ by Soren Brinkmann · 8 years ago
  58. 6a097b0 arm64: zynqmp: Reduced min-residency time for idle state node by Jolly Shah · 7 years ago
  59. fec5473 arm64: zynqmp: DT: Fix typo in idle-states node definition by Jyotheeswar Reddy · 8 years ago
  60. 941f61f arm64: zynqmp: Update the OPPs for cpu freq by Shubhrajyoti Datta · 8 years ago
  61. 585ca87 arm64: zynqmp: Add references to cpu nodes by Michal Simek · 8 years ago
  62. 40d1f8a arm64: zynqmp: Wire QSPI boot mode for SPL by Michal Simek · 7 years ago
  63. 494fffe arm64: zynqmp: Add support for CG/EG/EV device detection by Michal Simek · 7 years ago
  64. 011f0c4 arm64: zynqmp: Add SD1 level shifter mode to alternative selection by Michal Simek · 8 years ago
  65. 8940148 arm64: zynqmp: Enable config DEFINE_TCM_OCM_MMAP if CONFIG_MP defined by Siva Durga Prasad Paladugu · 7 years ago
  66. c85a6b7 tools: mkimage: Extend mkimage to also include pmufw by Michal Simek · 8 years ago
  67. e042d36 arm64: zynqmp: Provide a Kconfig option to use specified memory for MMU table by Siva Durga Prasad Paladugu · 7 years ago
  68. f322ad6 arm64: zynqmp: mp: Correct the R5 release sequence by Siva Durga Prasad Paladugu · 7 years ago
  69. 62e950f arm64: zynqmp: Remove slcr with mio status pin detection by Michal Simek · 7 years ago
  70. dea4d2f arm: zynq: Add mini u-boot configuration for zynq by Michal Simek · 7 years ago
  71. 70ca290 arm: zynq: Sort dts names by Michal Simek · 7 years ago
  72. bc133e8 arm: zynq: Add board support for cc108 by Michal Simek · 7 years ago
  73. 534f7e0 arm: zynq: Sync location of DT properties with Linux by Michal Simek · 7 years ago
  74. 5fad1ab arm: zynq: Add device-type property for zynq ethernet phy nodes by Sai Pavan Boddu · 8 years ago
  75. 57bcc7f arm: zynq: Add SCL & SDA GPIO entries for recovery by Chirag Parekh · 8 years ago
  76. 413ab5b arm: zynq: Add support for SYZYGY Hub board by Tom McLeod · 7 years ago
  77. 549d684 arm64: zynqmp: remove unnecessary logical constraint by Heinrich Schuchardt · 7 years ago
  78. 6e6cf01 Merge git://www.denx.de/git/u-boot-imx by Tom Rini · 7 years ago
  79. 52aaddd i.MX6: engicam: Add imx6q/imx6ul boards for existing boards by Jagan Teki · 7 years ago
  80. 539b1e2 board: icore-rqs: Fix mmc get env device by Jagan Teki · 7 years ago
  81. 152038e i.MX6UL: icore: Add SPL_OF_CONTROL support by Jagan Teki · 7 years ago
  82. 1f6e9bd i.MX6Q: icore: Add SPL_OF_CONTROL support by Jagan Teki · 7 years ago
  83. e2162d7 imx: Remove boolean parameter from wdog powerdown function by Fabio Estevam · 7 years ago
  84. b42287f imx: Also clear powerdown enable bit for WDOG3 on i.MX6ULL by Fabio Estevam · 7 years ago
  85. 23ecca2 mx6ull: Fix WDOG3 base address by Fabio Estevam · 7 years ago
  86. f07d76c rockchip: fix turning off boot-mode via Kconfig by Philipp Tomsich · 7 years ago
  87. 8c2bb58 rockchip: pinctrl: rk3399: add support for I2C8 by Philipp Tomsich · 7 years ago
  88. ecb103b rockchip: check download key before bootup by Andy Yan · 7 years ago
  89. b4d23f7 rockchip: add support for enter to bootrom download mode by Andy Yan · 7 years ago
  90. e306779 rockchip: make boot_mode related codes reused across all platforms by Andy Yan · 7 years ago
  91. 6ba5405 rockchip: sysreset: merge into one common driver by Kever Yang · 7 years ago
  92. 4bbb05b rockchip: rk3188: move CONFIG_SPL_* entries from rk3188_common.h to Kconfig by Philipp Tomsich · 7 years ago
  93. b82bd1f rockchip: back-to-bootrom: allow passing a cmd to the bootrom by Philipp Tomsich · 7 years ago
  94. 4d9253f rockchip: rk3188: use boot0 hook to load up SPL in 2 steps by Philipp Tomsich · 7 years ago
  95. ecfd718 rockchip: back-to-bootrom: replace assembly-implementation with C-code by Philipp Tomsich · 7 years ago
  96. b4806d6 arm: provide a PCS-compliant setjmp implementation by Philipp Tomsich · 7 years ago
  97. ff143d5 arm: mark save_boot_params_ret as a function by Philipp Tomsich · 7 years ago
  98. 7776cc0 arm: make save_boot_params_ret prototype visible for AArch64 by Philipp Tomsich · 7 years ago
  99. b377d22 rockchip: boot0 hook: support early return for RK3188/RK3066-style BROM by Philipp Tomsich · 7 years ago
  100. 16d761e bcm281xx: boot0 hook: adjust to unified boot0 semantics by Philipp Tomsich · 7 years ago