- f113d7d Convert CONFIG_SPL_STACK to Kconfig by Tom Rini · 2 years, 6 months ago
- 9b5f9ae Convert CONFIG_SPL_BSS_MAX_SIZE et al to Kconfig by Tom Rini · 2 years, 6 months ago
- d31466b Convert CONFIG_SYS_CBSIZE to Kconfig by Tom Rini · 2 years, 6 months ago
- cf49358 Convert CONFIG_SYS_MAXARGS to Kconfig by Tom Rini · 2 years, 6 months ago
- f83f0cb microblaze: Migrate DCACHE/ICACHE to Kconfig by Tom Rini · 2 years, 8 months ago
- 1d5686a Convert CONFIG_SYS_FAULT_ECHO_LINK_DOWN to Kconfig by Tom Rini · 2 years, 8 months ago
- a542e43 Convert CONFIG_BOOTP_MAY_FAIL et al to Kconfig by Tom Rini · 2 years, 9 months ago
- 1669b3d microblaze: exception: migrate MICROBLAZE_V5 to Kconfig by Ovidiu Panait · 2 years, 9 months ago
- 0f9595b configs: Migrate CONFIG_SYS_MAX_FLASH_BANKS to Kconfig by Patrick Delaunay · 2 years, 10 months ago
- 83b175b microblaze: migrate CONFIG_SYS_USR_EXCEP to Kconfig by Ovidiu Panait · 3 years ago
- 70c6871 microblaze: drop CONFIG_SYS_RESET_ADDRESS macro by Ovidiu Panait · 3 years ago
- 7cfbba3 Convert CONFIG_SYS_MALLOC_LEN to Kconfig by Tom Rini · 3 years, 3 months ago
- 49c8ef0 Convert CONFIG_SYS_LOAD_ADDR to Kconfig by Tom Rini · 3 years, 3 months ago
- 6b80de7 microblaze: Add nor device to distro boot by T Karthik Reddy · 4 years ago
- 631a241 microblaze: Detect NOR flash based on DT by Michal Simek · 4 years ago
- 09996b4 microblaze: Unify of setting for SPL_NOR/XIP support by Michal Simek · 4 years ago
- a3c43fb microblaze: Remove CONFIG_SYS_FDT_SIZE by Michal Simek · 4 years ago
- 6c5828d microblaze: Get rid of xparameters.h by Michal Simek · 4 years ago
- 7556fa0 microblaze: Simplify cache handling by Michal Simek · 4 years ago
- 91218f4 microblaze: Clean config file from ifdef mess by Michal Simek · 4 years ago
- 44d2be8 microblaze: Add support for distro boot by T Karthik Reddy · 4 years, 2 months ago
- 581d6a6 microblaze: trivial code fixes by T Karthik Reddy · 4 years, 2 months ago
- f5d8b1a microblaze: start.S: Use board_init_f_alloc/init in early init by Ovidiu Panait · 4 years, 2 months ago
- 74bb457 treewide: Remove CONFIG_SYS_UBOOT_START from configs board files by Patrice Chotard · 5 years ago
- a09fea1 env: Finish migration of common ENV options by Tom Rini · 5 years ago
- 8272f31 microblaze: Setup reasonable maximum bootm len by Michal Simek · 5 years ago
- c5ba635 microblaze: Enable cache by default by Michal Simek · 5 years ago
- 9d877c2 microblaze: Move CONFIG_LMB from board file to config.h by Michal Simek · 5 years ago
- 37304aa Convert CONFIG_USE_PREBOOT and CONFIG_PREBOOT to Kconfig by Simon Glass · 5 years ago
- b06da06 Add CONFIG_USE_PREBOOT to boards that use CONFIG_PREBOOT by Simon Glass · 5 years ago
- abe66b1 Convert CONFIG_ENV_SPI_* to Kconfig by Patrick Delaunay · 6 years ago
- 14453fb Convert CONFIG_SF_DEFAULT_* to Kconfig by Patrick Delaunay · 6 years ago
- 2fe88d4 Convert CONFIG_FLASH_CFI_DRIVER et al to Kconfig by Adam Ford · 6 years ago
- d7869b2 Convert CONFIG_MII et al to Kconfig by Adam Ford · 6 years ago
- 9c5b009 Convert CONFIG_MTD_PARTITIONS et al to Kconfig by Adam Ford · 6 years ago
- f4da871 microblaze: Remove XILINX_SPI_FLASH_BASEADDR logic by Michal Simek · 6 years ago
- 4a69366 microblaze: Convert generic platform to DM gpio by Michal Simek · 6 years ago
- 88811bb microblaze: Delete Xilinx watchdog related macros by Shreenidhi Shedi · 6 years ago
- 35912528 microblaze: Cosmetic changes in Microblaze related files by Shreenidhi Shedi · 6 years ago
- 83d290c SPDX: Convert all of our single license tags to Linux Kernel style by Tom Rini · 7 years ago
- f1b1f77 Convert CONFIG_SPI to Kconfig by Adam Ford · 7 years ago
- 5bc0543 treewide: Convert CONFIG_HOSTNAME to a string option by Mario Six · 7 years ago
- 71d5a14 microblaze: Added Kconfig support for CONFIG_XILINX_GPIO by Vipul Kumar · 7 years ago
- d021e94 Convert CONFIG_BOOTP_BOOTPATH et al to Kconfig by Adam Ford · 7 years ago
- 75670c8 configs: Migrate CONFIG_SPL_FRAMEWORK by Tom Rini · 7 years ago
- bd5a8e5 microblaze: Moved ethernet PHY configs of Microblaze board to defconfig by Vipul Kumar · 7 years ago
- 43ede0b Kconfig: Migrate MTDIDS_DEFAULT / MTDPARTS_DEFAULT by Tom Rini · 7 years ago
- 432e398 include/configs: drop default definitions of CONFIG_SYS_PBSIZE by Thomas Petazzoni · 7 years ago
- 5abc1a4 common: Move CONFIG_BOOTARGS to Kconfig by Sam Protsenko · 7 years ago
- 0ee89f2 spl: moveconfig: remove SPL_LDSCRIPT definitions for header-files by Philipp Tomsich · 7 years ago
- 72c3033 Convert CONFIG_CMD_SPL to Kconfig by Simon Glass · 7 years ago
- 15dc63d Convert CONFIG_CMD_SAVES to Kconfig by Simon Glass · 7 years ago
- f38c5f5 Convert CONFIG_CMD_MMC_SPI to Kconfig by Simon Glass · 7 years ago
- 1989374 configs: Finish migration of PHY_GIGE by Tom Rini · 7 years ago
- da3b9e7 Move PHY_MICREL and PHY_MICREL_KSZ90X1 to Kconfig by Alexandru Gagniuc · 7 years ago
- fb92bc8 configs: Replace deprecated Micrel defines with PHY_MICREL_KSZ90X1 by Alexandru Gagniuc · 7 years ago
- 91c868f Convert CONFIG_ENV_IS_IN_SPI_FLASH to Kconfig by Simon Glass · 7 years ago
- 85fc970 Convert CONFIG_ENV_IS_IN_FLASH to Kconfig by Simon Glass · 7 years ago
- 2be2965 Convert CONFIG_ENV_IS_IN_MMC/NAND/UBI and NOWHERE to Kconfig by Simon Glass · 7 years ago
- d56b4b1 configs: Migrate RBTREE, LZO, CMD_MTDPARTS, CMD_UBI and CMD_UBIFS by Tom Rini · 7 years ago
- 1b33089 Convert CONFIG_CMD_IRQ to Kconfig by Simon Glass · 7 years ago
- b8682a7 Convert CONFIG_CMD_JFFS2 to Kconfig by Simon Glass · 7 years ago
- 0680f1b Convert CONFIG_SPL_BOARD_INIT to Kconfig by Ley Foon Tan · 8 years ago
- f40574e Kconfig: Migrate CONFIG_BAUDRATE by Philipp Tomsich · 8 years ago
- e856bdc flash: complete CONFIG_SYS_NO_FLASH move with renaming by Masahiro Yamada · 8 years ago
- 3788b45 config: Move CONFIG_BOARD_LATE_INIT to defconfigs by Jagan Teki · 8 years ago
- f417d40 Convert CONFIG_SPL_RAM_DEVICE to defconfig by Stefan Agner · 8 years ago
- 2902a9b microblaze: Enable option to overwrite default variables by Michal Simek · 9 years ago
- a9fb35a microblaze: Remove hardcoded IP address from config by Michal Simek · 8 years ago
- ef26d60 Convert CONFIG_SYS_CONSOLE_IS_IN_ENV and CONFIG_CONSOLE_MUX to Kconfig by Simon Glass · 8 years ago
- 29d3bc7 spl: move SYS_OS_BASE to Kconfig by Heiko Schocher · 8 years ago
- c20ae2f spl: move SPL_OS_BOOT to Kconfig by Heiko Schocher · 8 years ago
- 8f2fe0c kconfig: introduce kconfig for UBI by Heiko Schocher · 8 years ago
- e00f76c Convert CONFIG_SPL_SERIAL_SUPPORT to Kconfig by Simon Glass · 8 years ago
- 7ace858 Convert CONFIG_SPL_NOR_SUPPORT to Kconfig by Simon Glass · 8 years ago
- cc4288e Convert CONFIG_SPL_LIBGENERIC_SUPPORT to Kconfig by Simon Glass · 8 years ago
- 77d2f7f Convert CONFIG_SPL_LIBCOMMON_SUPPORT to Kconfig by Simon Glass · 8 years ago
- 5aa79f2 spl_nor.c: Support devicetree sizes different from 16k by Mike Looijmans · 8 years ago
- 91afeb3 microblaze: Remove empty ifdef around caches by Michal Simek · 8 years ago
- bb597c0 common: bootdelay: move CONFIG_BOOTDELAY into a Kconfig option by Heiko Schocher · 8 years ago
- 89cb2b5 configs: Re-sync with cmd/Kconfig by Tom Rini · 9 years ago
- 78d1e1d configs: Re-sync almost all of cmd/Kconfig by Tom Rini · 9 years ago
- a359eaa microblaze: Remove !OF_CONTROL code for timer and interrupt by Michal Simek · 9 years ago
- 73223f0 Kconfig: Move CONFIG_FIT and related options to Kconfig by Simon Glass · 9 years ago
- 69e173e Move CONFIG_OF_LIBFDT to Kconfig by Simon Glass · 9 years ago
- 38c4761 microblaze: Fix board_init calling sequence by Michal Simek · 9 years ago
- 077fe0f microblaze: Enable HUSH via Kconfig by Michal Simek · 9 years ago
- 44a3a91 microblaze: Read information about RAM from DT by Michal Simek · 9 years ago
- b11ec1a microblaze: Move CONFIG_NETCONSOLE to Kconfig by Michal Simek · 9 years ago
- 27f24a3 microblaze: Remove CONFIG_FIT from board file by Michal Simek · 9 years ago
- ed982b4 microblaze: Remove systemace from board file by Michal Simek · 9 years ago
- 502547e microblaze: Move eth configuration to Kconfig by Michal Simek · 9 years ago
- 83b76d9 microblaze: Enable axi emac via Kconfig by Michal Simek · 9 years ago
- 3229c86 net: emaclite: Move emaclite to Kconfig by Michal Simek · 9 years ago
- 2014a3d microblaze: Enable MICREL_KSZ9021 by Michal Simek · 9 years ago
- 9040f4e microblaze: Enable PHYLIB via Kconfig by Michal Simek · 9 years ago
- f0e353c microblaze: Enable uart16550 DM by default by Michal Simek · 9 years ago
- 54e24d3 serial: uartlite: Add uartlite to Kconfig by Michal Simek · 9 years ago
- 67659e2 microblaze: Move baudrate setting out driver selection by Michal Simek · 9 years ago
- 1cc174d microblaze: Remove CONSOLE_ARG by Michal Simek · 9 years ago