Gitiles
Code Review Sign In
gerrit.devboardsforandroid.linaro.org / platform / external / u-boot / f17ea71d3a8c44c9a74ab1df1eca43b9755cb225
  1. 16ce6de net: zynq: Add support for different PHY interface types by Michal Simek · 9 years ago
  2. 198e9a4 net: zynq: Add debug message to phyread/phywrite by Michal Simek · 9 years ago
  3. 08598d6 ARM: zynq: Add target for building bootable SPL image for Zynq by Nathan Rossi · 9 years ago
  4. 66eef1e tools: zynqimage: Add Xilinx Zynq boot header generation to mkimage by Nathan Rossi · 9 years ago
  5. bf14632 ARM64: zynqmp: Enable TI phy by default by Michal Simek · 9 years ago
  6. 721aed7 net: phy: Add support for Texas Instruments DP83867 by Edgar E. Iglesias · 9 years ago
  7. 8741c49 ARM: zynq: Choose boot image based on OF_SEPARATE macro by Michal Simek · 9 years ago
  8. a7bcd4c zynqmp: mp: Add support for booting R5 from any address by Michal Simek · 9 years ago
  9. a7c06cd env_ubi.c: Correct pointer error in env load by Kevin Smith · 9 years ago
  10. 736d174 itest: add missing break statements to evalexp() by Stephen Warren · 9 years ago
  11. 34a60d9 test: fat: add error-checking to non-contig test by Stephen Warren · 9 years ago
  12. 60f989a Fix sandbox build on Ubuntu 10.04 by Stephen Warren · 9 years ago
  13. 89127c5 km/powerpc: fix ft_board_setup prototype for km82xx & km83xx by Valentin Longchamp · 9 years ago
  14. 5411988 powerpc/83xx: add support for kmtegr1 board by Valentin Longchamp · 9 years ago
  15. 38467df km8309: change the default QE_FW address by Valentin Longchamp · 9 years ago
  16. 68005ea km83xx: use CONFIG_ENV_ADDR for the newenv env command by Valentin Longchamp · 9 years ago
  17. cd7255f board/keymile/km82xx: setting dip_switch 3 and 4 will run bootloader by Bagavathiannan Palanisamy · 9 years ago
  18. 22554ba powerpc/km8360: fix the ODT parameters for CS0 by Valentin Longchamp · 9 years ago
  19. fd70858 powerpc/km8309: define CONFIG_SYS_DDRCDR by Valentin Longchamp · 9 years ago
  20. d4bd2ca powerpc/km8321: define CONFIG_SYS_DDRCDR by Valentin Longchamp · 9 years ago
  21. 8b2dd8a km/powerpc82xx: remove unused function by Holger Brunck · 9 years ago
  22. fc882a3 km/powerpc: remove unneeded defines by Holger Brunck · 9 years ago
  23. bbd94a0 km/powerpc: move open firmware defines to km-powerpc.h by Holger Brunck · 9 years ago
  24. d6d8647 km/powerpc: increase space for kernel imange and FDT blob by Holger Brunck · 9 years ago
  25. d3f1d6f powerpc/82xx/km: add testpin detection for mgcoge3ne by Holger Brunck · 9 years ago
  26. 74edc60 powerpc/82xx: make set/get_pin for km82xx more flexible by Holger Brunck · 9 years ago
  27. c1e121e powerpc/83xx: add support for kmtepr2 board by Christoph Dietrich · 9 years ago
  28. ef3f2f0 km/scripts: search for kernel/DTBs at serverip:/PRODUCTNAME via TFTP in develop mode by Tobias Müller · 9 years ago
  29. 91b9db0 km/scripts: load fdt_bid_kwkey.dtb when working with tftp by Holger Brunck · 9 years ago
  30. c6d32df km: update the boot script to check for a DTB by Valentin Longchamp · 9 years ago
  31. 7f70460 km/common: stop u-boot only if someone press <SPACE> by Holger Brunck · 9 years ago
  32. 30f9ad7 arm/km_kirkwood: fix the #ifdef for KM_COGE5UN dip switch by Valentin Longchamp · 9 years ago
  33. e23fde7 arm/mgcoge3un: check dip_switch at startup by Holger Brunck · 9 years ago
  34. 9ff739e arm/km: Fix LED configuration for 88E1118R PHY (PIGGY3) by Tobias Müller · 9 years ago
  35. 716e4ff arm/km_kirkwood: remove KM_ENV_BUS and use CONFIG_I2C_ENV_EEPROM_BUS by Valentin Longchamp · 9 years ago
  36. dfd1bb4 board/ti/am335x: add support for BeagleBone Green by robertcnelson@gmail.com · 9 years ago
  37. e4aa8ed common: add CMD_GPIO to Kconfig by Thomas Chou · 9 years ago
  38. 5108744 git-mailrc: Add Bin as a maintainer of x86 by Bin Meng · 9 years ago
  39. 0a57c03 omap3: cm-t3517: add board specific get_board_rev() by Dmitry Lifshitz · 9 years ago
  40. a1e56cf spl: mmc: add support for BOOT_DEVICE_MMC2 by Nikita Kiryanov · 9 years ago
  41. 7b9e980 arm: mx6: cm-fx6: define fallback boot devices for spl by Nikita Kiryanov · 9 years ago
  42. 310c846 spl: announce boot devices by Nikita Kiryanov · 9 years ago
  43. f101e4b spl: add support for alternative boot device by Nikita Kiryanov · 9 years ago
  44. 5211b87 common: spl: move image load to its own function by Nikita Kiryanov · 9 years ago
  45. 36afd45 spl: change return values of spl_*_load_image() by Nikita Kiryanov · 9 years ago
  46. 83cdf6f spl: mmc: get rid of emmc boot code duplication by Nikita Kiryanov · 9 years ago
  47. f52b729 spl: mmc: move fs boot into its own function by Nikita Kiryanov · 9 years ago
  48. d074ebb spl: mmc: get rid of #ifdef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION check by Nikita Kiryanov · 9 years ago
  49. 339245b spl: mmc: remove #ifdef CONFIG_SPL_OS_BOOT check by Nikita Kiryanov · 9 years ago
  50. 4188ba3 spl: mmc: refactor device location code to its own function by Nikita Kiryanov · 9 years ago
  51. fd61d39 spl: mmc: add break statements in spl_mmc_load_image() by Nikita Kiryanov · 9 years ago
  52. 483ab3d spl: nand: remove code duplication by Nikita Kiryanov · 9 years ago
  53. 2cb11b3 Allow fw env tools to be available as library by Stefano Babic · 9 years ago
  54. 74cc8b0 board: ti: beagle_x15: Rename to indicate support for TI am57xx evms by Kipisz, Steven · 9 years ago
  55. 9884f44 tools/env: allow config filename to be passed via command line argument by Michael Heimpold · 9 years ago
  56. f5b76de nios2: zap ioremap by Thomas Chou · 9 years ago
  57. 7be35dd nios2: dma-mapping.h: change ioremap to map_physmem by Thomas Chou · 9 years ago
  58. 079bfc5 altera_pio: change ioremap to map_physmem by Thomas Chou · 9 years ago
  59. 8ed38fa altera_qspi: change ioremap to map_physmem by Thomas Chou · 9 years ago
  60. e2b259f altera_tse: change ioremap to map_physmem by Thomas Chou · 9 years ago
  61. 9cbb923 altera_sysid: change ioremap to map_physmem by Thomas Chou · 9 years ago
  62. 7313e21 altera_spi: change ioremap to map_physmem by Thomas Chou · 9 years ago
  63. 4c26ec1 altera_timer: change ioremap to map_physmem by Thomas Chou · 9 years ago
  64. 1ec60b9 altera_uart: change ioremap to map_physmem by Thomas Chou · 9 years ago
  65. 18c3f27 altera_jtag_uart: change ioremap to map_physmem by Thomas Chou · 9 years ago
  66. 3e56ece sf: Correct flash->flags for SST flash by Bin Meng · 9 years ago
  67. fe52456 Merge git://git.denx.de/u-boot-marvell by Tom Rini · 9 years ago
  68. 6a26748 arm: kirkwood: ib62x0: drop duplicate defines from CONFIG_SYS_MVFS by Luka Perkov · 9 years ago
  69. 6d55963 arm: kirkwood: ib62x0: drop dev CONFIG_OF_LIBFDT by Luka Perkov · 9 years ago
  70. ab71ece arm: kirkwood: ib62x0: make use of defconfig by Luka Perkov · 9 years ago
  71. e19f42c arm: kirkwood: ib62x0: drop CONFIG_CMD_ENV define by Luka Perkov · 9 years ago
  72. bd4c1d3 arm: kirkwood: ib62x0: build u-boot.kwb by Luka Perkov · 9 years ago
  73. f9edf38 arm: kirkwood: ib62x0: drop CONFIG_MACH_TYPE by Luka Perkov · 9 years ago
  74. 38c0e86 arm: kirkwood: Move common definitions into common file by Quentin Armitage · 9 years ago
  75. 310866b arm: kirkwood: Remove duplicate definition from dreamplug.h by Quentin Armitage · 9 years ago
  76. f6b1f66 arm: kirkwood: Align configuration files by Quentin Armitage · 9 years ago
  77. ea94400 arm: kirkwood: Use common definition for filesystems by Quentin Armitage · 9 years ago
  78. 5e69947 arm: kirkwood: Move configuration of some commands to _defconfig files by Quentin Armitage · 9 years ago
  79. 82a19de arm: kirkwood: Remove duplicate definition of CONFIG_CMD_FAT by Quentin Armitage · 9 years ago
  80. 6456163 arm: kirkwood: standardise the configuration by Quentin Armitage · 9 years ago
  81. a21b4f0 arm: mvebu: Fix SAR1_CPU_CORE_MASK by Dirk Eibach · 9 years ago
  82. ea8b687 tools/kwbimage.c: Fix generation of binary header by Stefan Roese · 9 years ago
  83. 490753a arm: mvebu: a38x: serdes specification cleanup by Kevin Smith · 9 years ago
  84. 18c202a arm: mvebu: a38x: Add const to some function calls by Kevin Smith · 9 years ago
  85. 544acb0 arm: mvebu: a38x: Remove unsupported topologies by Kevin Smith · 9 years ago
  86. fb2dea6 board: axs10x switch serial port and Ethernet to driver model by Alexey Brodkin · 9 years ago
  87. db1f17f arc: add empty asm/processor.h to satisfy compilation of USB code by Alexey Brodkin · 9 years ago
  88. 90841dc arc: add stubs for map_physmem() and unmap_physmem() by Alexey Brodkin · 9 years ago
  89. a668a16 spi: sf_ops: Check the return value from spi_flash_cmd_read_status() by Fabio Estevam · 9 years ago
  90. 5168721 sf: Add lock ops for SST SPI NOR flash by Fabio Estevam · 9 years ago
  91. 7693fb3 sf: Remove eeprom_m95xxx test driver by Jagan Teki · 9 years ago
  92. 2d13459 ARM: am43xx: Enable QUAD read and EDMA support for ti_qspi by Vignesh R · 9 years ago
  93. 857db48 spi: ti_qspi: Add dummy readl for bus sync by Vignesh R · 9 years ago
  94. 3d48254 Prepare v2016.01-rc1 by Tom Rini · 9 years ago
  95. 1ca8f88 tools/proftool: fix use-after-free by Vincent Stehlé · 9 years ago
  96. 98e73c8 Merge branch 'master' of git://www.denx.de/git/u-boot-imx by Tom Rini · 9 years ago
  97. ec26c1e arm: mx6: cm-fx6: add splash locations to cm-fx6 by Nikita Kiryanov · 9 years ago
  98. 50c2d2e splash_source: add support for filesystem formatted sata by Nikita Kiryanov · 9 years ago
  99. 9bb4e94 splash_source: add support for filesystem formatted usb by Nikita Kiryanov · 9 years ago
  100. 870dd30 splash_source: add support for filesystem formatted mmc by Nikita Kiryanov · 9 years ago