Gitiles
Code Review Sign In
gerrit.devboardsforandroid.linaro.org / platform / external / u-boot / f4f194e864e879896e630594448b31cc672a4934
  1. e07cff1 configs: ti_armv7_keystone2: start using armv7_common by Nishanth Menon · 9 years ago
  2. e8428d6 configs: rename ks2_evm into ti_armv7_keystone2 by Nishanth Menon · 9 years ago
  3. 59d4cd2 board: ks2_evm: get rid of bogus CONFIG_LINUX_BOOT_PARAM_ADDR by Nishanth Menon · 9 years ago
  4. 7f2f44d configs: ti: armv7_common: enable Thumb mode for all by Nishanth Menon · 9 years ago
  5. 9a0f400 configs: split ti_armv7_common into a omap generic header by Nishanth Menon · 9 years ago
  6. 8845ad4 nokia_rx51: Typo in CONFIG_MUSB_HCD fixup by Paul Kocialkowski · 9 years ago
  7. 1584e4f Update the rootfs type to ext4 for Overo and Pepper by Adam YH Lee · 9 years ago
  8. f9fa4a2 stm32f429: use 180 MHz system clock by Antonio Borneo · 9 years ago
  9. fffde77 stm32f4: add cpu clock option for 180 MHz by Antonio Borneo · 9 years ago
  10. 089fddf stm32f429: pass the device unique ID in DTB by Antonio Borneo · 9 years ago
  11. b0c8f4a Kill unneeded #include <linux/kconfig.h> by Masahiro Yamada · 9 years ago
  12. 3c963d2 board: ks2: README: fix typos by Nishanth Menon · 9 years ago
  13. bafa6f5 am33xx: Unused get_board_rev function removal by Paul Kocialkowski · 9 years ago
  14. fb9006c omap3: CONFIG_REVISION_TAG ifdef check for get_board_rev by Paul Kocialkowski · 9 years ago
  15. d1a04b3 omap5: Definitions for SYS_BOOT-based fallback boot device selection by Paul Kocialkowski · 9 years ago
  16. 94fc751 omap4: Definitions for SYS_BOOT-based fallback boot device selection by Paul Kocialkowski · 9 years ago
  17. cfac375 omap3: Definitions for SYS_BOOT-based fallback boot device selection by Paul Kocialkowski · 9 years ago
  18. ed19bda omap-common: SYS_BOOT-based fallback boot device selection for peripheral boot by Paul Kocialkowski · 9 years ago
  19. 2cb81b6b siemens-am33x-common: Hardcoded value instead of non-included define by Paul Kocialkowski · 9 years ago
  20. df84477 omap-common: Boot device define instead of hardcoded value by Paul Kocialkowski · 9 years ago
  21. 62c5674 omap: SPL boot devices cleanup and completion by Paul Kocialkowski · 9 years ago
  22. 60c7c30 omap-common: Common boot code OMAP3 support and cleanup by Paul Kocialkowski · 9 years ago
  23. a350c6a kbuild: create symbolic link only for ARM, AVR32, SPARC, PowerPC, x86 by Masahiro Yamada · 9 years ago
  24. 7e3f94e nds32: include <asm/arch-*/*.h> instead of <asm/arch/*.h> by Masahiro Yamada · 9 years ago
  25. dac326b generic_board: Call "checkboard" even though the root node has a "model" property by Haikun.Wang@freescale.com · 9 years ago
  26. 5031ca5 keystone2: net: add mcast function to keyston2 Ethernet driver by Vitaly Andrianov · 9 years ago
  27. 17c5bda keystone2: add wfi in to the core_spin loop by Vitaly Andrianov · 9 years ago
  28. f5df36d misc: led: pca9551_led: Fix problem with multiple blink frequencies by Stefan Roese · 9 years ago
  29. 6b33056 stm32f429-discovery: Use ttyS0 as the console device by rev13@wp.pl · 9 years ago
  30. 4d713be kbuild: use relative path more to include Makefile by Masahiro Yamada · 9 years ago
  31. ba84de9 kbuild: do not add $((generic-)offsets-file) to targets by Masahiro Yamada · 9 years ago
  32. 98bd0e0 kbuild: sync with Linux 4.1 by Masahiro Yamada · 9 years ago
  33. 9b5f0b1 kconfig: sync with Linux 4.1 by Masahiro Yamada · 9 years ago
  34. d6fc0ce config: ti_omap5_common: Palmas power support in SPL by Paul Kocialkowski · 9 years ago
  35. 5b94ce2 cgtqmx6eval: Use standard boot script by Otavio Salvador · 9 years ago
  36. f33abe3 cgtqmx6eval: Align DCD settings with Congatec's U-boot by Otavio Salvador · 9 years ago
  37. 6731bc8 cgtqmx6eval: Add SATA support by Otavio Salvador · 9 years ago
  38. 6d551f2 cgtqmx6eval: Add splash screen support by Otavio Salvador · 9 years ago
  39. 95246ac cgtqmx6eval: Add USB support by Otavio Salvador · 9 years ago
  40. 4c9929d cgtqmx6eval: Add PMIC support by Otavio Salvador · 9 years ago
  41. 862187b cgtqmx6eval: Add thermal support by Otavio Salvador · 9 years ago
  42. 45e4d35 cgtqmx6eval: Add ESDHC3 support by Otavio Salvador · 9 years ago
  43. dbcb6ff cgtqmx6eval: Fit into single lines by Otavio Salvador · 9 years ago
  44. 516a863 cgtqmx6eval: Improve the error handling by Otavio Salvador · 9 years ago
  45. 6b3496f cgtqmx6eval: Staticize when possible by Otavio Salvador · 9 years ago
  46. d6ec45d cgtqmx6eval: Use the default CONFIG_SYS_PBSIZE by Otavio Salvador · 9 years ago
  47. 72d2125 cgtqmx6eval: Use default prompt by Otavio Salvador · 9 years ago
  48. 4683b22 mmc:fsl_esdhc invalidate dcache before read by Peng Fan · 9 years ago
  49. 42acd18 mx6sxsabresd: Use 'int' for return values by Fabio Estevam · 9 years ago
  50. e4b984d mx6sabresd: Use 'int' for return values by Fabio Estevam · 9 years ago
  51. 44f98f9 warp: Add MAX77696 support by Fabio Estevam · 9 years ago
  52. a643acd power: pmic: Add support for MAX77696 PMIC by Fabio Estevam · 9 years ago
  53. 6918f97 thermal: Fix comments by Fabio Estevam · 9 years ago
  54. 0b7f7c3 imx: imximage: add new CHECK/CLR BIT command by Adrian Alonso · 9 years ago
  55. 452308c arm: mx6: tqma6: Add WRU-IV baseboard for the TQMa6 SoM by Stefan Roese · 9 years ago
  56. 2647394 Merge branch 'master' of http://git.denx.de/u-boot-sunxi by Tom Rini · 9 years ago
  57. 7f7409b sunxi: Enable both ehci and otg in host mode on various boards by Hans de Goede · 9 years ago
  58. a51c832 sunxi: ga10h: Enable both otg and regular usb host controllers by Hans de Goede · 9 years ago
  59. 9ecce97 sunxi: musb: Stop treating not having a vbus-det gpio as an error by Hans de Goede · 9 years ago
  60. 56a2085 sunxi: musb: Improve output during probing by Hans de Goede · 9 years ago
  61. 91183ba sunxi: musb: Use device-model for musb host mode by Hans de Goede · 9 years ago
  62. d42faf3 sunxi: musb: Move musb config and platdata to the sunxi-musb glue by Hans de Goede · 9 years ago
  63. 71cbe0d sunxi: musb: Add id pin support by Hans de Goede · 9 years ago
  64. b41972e sunxi: musb: Move vbus check to sunxi_musb_enable by Hans de Goede · 9 years ago
  65. 48c06c9 sunxi: usb-phy: Add support for reading otg id pin value by Hans de Goede · 9 years ago
  66. de1502c sunxi: Enable CMD_USB and USB_STORAGE by default on sunxi by Hans de Goede · 9 years ago
  67. 4536882 sunxi: Update selects in arch/arm/Kconfig for DM conversions by Tom Rini · 9 years ago
  68. d08980d sunxi: Remove bogus uart entry from utoo-p66 dts file by Hans de Goede · 9 years ago
  69. 6f4e050 Merge git://git.denx.de/u-boot-usb by Tom Rini · 9 years ago
  70. 58d6d13 usb: ci_udc: fix request allocation when endpoints are disabled by Rob Herring · 9 years ago
  71. bf5b9b1 sunxi: spl: Remove redundant check from `board_mmc_init` for signature by Daniel Kochmański · 9 years ago
  72. a151403 sunxi: spl: Detect at runtime where SPL was read from by Daniel Kochmański · 9 years ago
  73. 645c48f sunxi: Create helper function veryfing valid boot signature on MMC by Daniel Kochmański · 9 years ago
  74. 1b26bab mmc: Protect `mmc_initialize` from initialising mmc multiple times by Daniel Kochmański · 9 years ago
  75. 5a9749e arm: marvell: Increase MAXARGS to 32 by Stefan Roese · 9 years ago
  76. 7853c50 arm: mvebu: db-88f6820-gp: Add SDIO/MMC SPL boot support by Stefan Roese · 9 years ago
  77. 4bfcc54 spl: spl_mmc: Add option to boot from a MMC partition with offset by Stefan Roese · 9 years ago
  78. 7ddf8cf kwbimage: Rename CONFIG_SYS_SPI_U_BOOT_OFFS to CONFIG_SYS_U_BOOT_OFFS by Stefan Roese · 9 years ago
  79. 1bbe63c kwbimage: Add support for SDIO/MMC boot device selection by Stefan Roese · 9 years ago
  80. 8ed43b9 arm: mvebu: Add SPL SDIO/MMC boot support by Stefan Roese · 9 years ago
  81. de934b4 common/lcd_simplefb: Add support for 32bit organized framebuffers by Hannes Petermaier · 9 years ago
  82. 413978d Merge git://git.denx.de/u-boot-uniphier by Tom Rini · 9 years ago
  83. 62102be ARM: UniPhier: document reference support card by Masahiro Yamada · 9 years ago
  84. f1d7945 ARM: dts: UniPhier: add I2C ch4 device node for PH1-sLD3 by Masahiro Yamada · 9 years ago
  85. 3365b4e ARM: UniPhier: add PH1-sLD3 SoC support by Masahiro Yamada · 9 years ago
  86. ad6670e ARM: UniPhier: update CONFIG_BOOTARGS by Masahiro Yamada · 9 years ago
  87. d259449 ARM: UniPhier: disable CONFIG_FIT by Masahiro Yamada · 9 years ago
  88. e037db0 ARM: UniPhier: add environment variable for TFTP boot by Masahiro Yamada · 9 years ago
  89. 421376a ARM: UniPhier: add environment sets for non-FIT Linux boot by Masahiro Yamada · 9 years ago
  90. 6b71e6d ARM: dts: UniPhier: add device-specific compatible string for EEPROM by Masahiro Yamada · 9 years ago
  91. 3c9cc70 Merge git://git.denx.de/u-boot-marvell by Tom Rini · 9 years ago
  92. 9e30b31 arm: mvebu: db-88f6820: Add SPL support with DDR init code by Stefan Roese · 10 years ago
  93. ad6ac7a arm: mvebu: a38x: Use correct PEX register access macros by Stefan Roese · 9 years ago
  94. f1df936 arm: mvebu: Add Armada 38x DDR3 training code from Marvell bin_hdr by Stefan Roese · 10 years ago
  95. ff9112d arm: mvebu: drivers/ddr: Move Armada XP DDR init code into new directory by Stefan Roese · 10 years ago
  96. edb4702 arm: mvebu: Add Armada 38x SERDES / PHY init code from Marvell bin_hdr by Stefan Roese · 9 years ago
  97. 29b103c arm: mvebu: serdes: Move Armada XP SERDES / PHY init code into new directory by Stefan Roese · 9 years ago
  98. c25012b Makefile: Fix mvebu build target to use SPL load and exe-address by Stefan Roese · 9 years ago
  99. 9f62b44 arm: mvebu: Disable MMU before changing register base address by Stefan Roese · 9 years ago
  100. e3cccf9 arm: mvebu: spl.c: Add call to board_early_init_f() by Stefan Roese · 9 years ago