1. 1b41493 mpc52xx, digsy_mtc: change phy addr for rev5 boards. by Heiko Schocher · 14 years ago
  2. 9030a55 NET: Correct potential missing goto label in case statement. by Gray Remlin · 14 years ago
  3. 2dc55d9 fix redundant environment for serial flash by thomas.langer@lantiq.com · 14 years ago
  4. f38536f Merge branch 'master' of git://git.denx.de/u-boot-arm by Wolfgang Denk · 13 years ago
  5. 34b5fc4 Merge branch 'master' of git://git.denx.de/u-boot-fdt by Wolfgang Denk · 13 years ago
  6. 547bea1 Merge branch 'master' of git://git.denx.de/u-boot-blackfin by Wolfgang Denk · 13 years ago
  7. 5f902cf Merge branch 'spi' of git://git.denx.de/u-boot-blackfin by Wolfgang Denk · 13 years ago
  8. d32a1a4 Don't grab memory for LCD if FB address is defined by Minkyu Kang · 13 years ago
  9. aeb630d nhk8815: move config targets from Makefile to boards.cfg by Alessandro Rubini · 14 years ago
  10. afba32b nhk8815: add support for relocation by Alessandro Rubini · 14 years ago
  11. cb8948e nhk8815: remove platform.S, which was unused at link time by Alessandro Rubini · 14 years ago
  12. 632f8fd cpuat91: fix board support by Eric Benard · 14 years ago
  13. 00d10eb ftsmc020: move ftsmc020 static mem controller to driver/mtd by Macpaul Lin · 14 years ago
  14. 5656b40 ftsdmc020: move ftsdmc020.h to include/faraday by Macpaul Lin · 14 years ago
  15. c2b2a07 cpu9260: update board support by Eric Benard · 14 years ago
  16. 9a29046 Fix the issue of _end symbol not being found while building by Sughosh Ganu · 14 years ago
  17. fb6e1f1 ARMV7: OMAP3: Add support for Comelit DIG297 board by Luca Ceresoli · 13 years ago
  18. 6cbec7b ARMV7: OMAP3: Cleanup extern variables in mem.c by Luca Ceresoli · 13 years ago
  19. f4ef666 arm: Tegra2: Move clk/mux init to board_early_init_f, add GPIO init by Tom Warren · 14 years ago
  20. c5e9313 arm: Tegra2: GPIO: Add basic GPIO definitions by Tom Warren · 14 years ago
  21. 1436d51 arm: Tegra2: Add missing PLLX init by Tom Warren · 14 years ago
  22. 6445a30 ARM: fix stack pointer adjustment in board_init_f() by Eric Cooper · 14 years ago
  23. 74652cf arm: Tegra2: add support for A9 CPU init by Tom Warren · 14 years ago
  24. c2b626c ARMV7: OMAP3: Add GPMC_CONFIGx register value definitions by Luca Ceresoli · 13 years ago
  25. b32e812 ARMV7: OMAP3: Fix preprocessor check for CONFIG_OMAP34XX by Luca Ceresoli · 13 years ago
  26. d90859a omap3_beagle: enable EHCI and USB storage. by Alexander Holler · 13 years ago
  27. 7b89795 OMAP3: Add support for DPLL5 (usbhost) by Alexander Holler · 13 years ago
  28. 320f56f OMAP3: Change some USB related MUX values by Alexander Holler · 13 years ago
  29. 30f3413 ARM: OMAP3: Revamp IGEP module default configuration by Enric Balletbo i Serra · 13 years ago
  30. 304a46c ARM: OMAP3: Revamp IGEP v2 default by Enric Balletbo i Serra · 13 years ago
  31. 57b4bce Replace obsolete e-mail address by Albert ARIBAUD · 13 years ago
  32. 844c05a a320evb: fix include path of timer fttmr010 by Macpaul Lin · 14 years ago
  33. 0f7ffd7 fttmr010: move fttmr010 header to include/faraday by Macpaul Lin · 14 years ago
  34. d228710 ftpmu010.h: add asm support used by lowlevel_init by Macpaul Lin · 14 years ago
  35. caddb8e ftpmu010: fix relocation and enhance features by Macpaul Lin · 14 years ago
  36. 286a5b2 Orion5x: Correct DRAM bank detection by Rogan Dawes · 14 years ago
  37. 81a9ab2 I2C: add i2c support for Armada100 platform by Lei Wen · 14 years ago
  38. adb00bb I2C: mv_i2c: add multi bus support by Lei Wen · 14 years ago
  39. aa3b168 I2C: add i2c support for Pantheon platform by Lei Wen · 14 years ago
  40. 3df619e mv_i2c: use structure to replace the direclty define by Lei Wen · 14 years ago
  41. 879de12 mv_i2c: fix timeout value to be consistent with comments by Lei Wen · 14 years ago
  42. 68432c2 pxa: move i2c driver to the common place by Lei Wen · 14 years ago
  43. 7767849 MX25: tx25: Add _end section on nand_spl by Fabio Estevam · 14 years ago
  44. 7f5b2bb MX31: mx31pdk: fix nand_spl by Stefano Babic · 14 years ago
  45. 471eec5 ARMV7: Vexpress: Remove config.mk by Matt Waddel · 14 years ago
  46. 8dc667c arm: a320: use new ftpmu010 API by Po-Yu Chuang · 14 years ago
  47. d6150db power: ftpmu010: move drivers/power/ftpmu010.h to include/faraday by Po-Yu Chuang · 14 years ago
  48. d8834a1 arm: Use optimized memcpy and memset from linux by Matthias Weisser · 14 years ago
  49. b65a77a OMAP3: CM-T35: Add support for CM-T3730 by Igor Grinberg · 13 years ago
  50. 2b8754b OMAP3: CM-T35: enable the green LED by Igor Grinberg · 13 years ago
  51. afff1fc OMAP3: CM-T35: remove redundand i2c initialization by Igor Grinberg · 13 years ago
  52. 13009e3 OMAP3: CM-T35: fix mmc by Igor Grinberg · 13 years ago
  53. eec70c2 OMAP3: CM-T35: add MMC1 pinmux by Igor Grinberg · 13 years ago
  54. 31dd52f OMAP3: CM-T35: update MAINTAINERS file by Igor Grinberg · 13 years ago
  55. dccd9a0 OMAP3: CM-T35: update board files header information by Igor Grinberg · 13 years ago
  56. 41d7e70 OMAP3: CM-T35: update config by Igor Grinberg · 13 years ago
  57. 557aa15 OMAP3: CM-T35: Move DECLARE_GLOBAL_DATA_PTR to file scope by Igor Grinberg · 13 years ago
  58. 915162d ARMV7: AM3517/05: Add support for CraneBoard. by Srinath · 13 years ago
  59. ee8485f OMAP3: BeagleBoard: add more expansionboard IDs by Koen Kooi · 13 years ago
  60. f6e593b OMAP3: BeagleBoard: add xM rev B to ID table by Koen Kooi · 13 years ago
  61. d4e53f0 OMAP3: BeagleBoard: Enable pullups on i2c2. by Steve Kipisz · 13 years ago
  62. cf073e4 omap3_beagle: enable the use of a plain text file by Alexander Holler · 13 years ago
  63. 70d8c94 BeagleBoard: Added LED driver by Jason Kridner · 13 years ago
  64. b633f66 Add 'led' command by Jason Kridner · 13 years ago
  65. cd4b8a6 MX31: drop warnings in get_cpu_rev by Stefano Babic · 13 years ago
  66. 7517a79 MX5: factor out boot cause funciton to common code by Jason Liu · 13 years ago
  67. a770975 ARM: MX31: Fix file name label by Fabio Estevam · 14 years ago
  68. e9e0790 MX31: mx31pdk: Make the board name simpler. by Fabio Estevam · 13 years ago
  69. 25d8e1b MX31: Introduce get_reset_cause() by Fabio Estevam · 13 years ago
  70. 4adaf9b ARM: mx31: Print the silicon version by Fabio Estevam · 14 years ago
  71. 8627111 IMX: MX31: Cleanup include files and drop nasty #ifdef in drivers by Stefano Babic · 14 years ago
  72. dcd441c MX5: Enable flat-device-tree support on mx51/53 evk board by Liu Hui-R64343 · 14 years ago
  73. ec665d75 MX53: drop config.mk from mx53evk by Liu Hui-R64343 · 14 years ago
  74. 9aa720b mx25: Make the UART port number explicit in its setup function by Fabio Estevam · 14 years ago
  75. 8640c98 MX31: qong: add watchdog by Stefano Babic · 14 years ago
  76. 2cf36ae MX31: add support for MX31 watchdog by Stefano Babic · 14 years ago
  77. c7bdcb6 MX51: drop config.mk from mx51evk by Stefano Babic · 14 years ago
  78. 45d7d72 Makefile: change rule to build IMX image by Stefano Babic · 14 years ago
  79. 55b0a39 Respect memreserve regions specified in the device tree by Grant Likely · 14 years ago
  80. ce6b27a Fix off-by-one error in passing initrd end address via device tree by Grant Likely · 14 years ago
  81. ed59e58 Remove device tree booting dependency on CONFIG_SYS_BOOTMAPSZ by Grant Likely · 14 years ago
  82. c3624e6 Default to bootm_size() when CONFIG_SYS_BOOTMAPSZ is not defined by Grant Likely · 14 years ago
  83. 590d3ca Stop passing around bootmem_base value. by Grant Likely · 14 years ago
  84. a01ebd9 mpc52xx, digsy_mtc: add trickle charger support for rev5 boards. by Heiko Schocher · 14 years ago
  85. 71d19f3 rtc, rv3029: add trickle charger support. by Heiko Schocher · 14 years ago
  86. 31e4139 Fix typo in #error: IS_IN_NOWHERE vs. IS_NOWHERE by Loïc Minier · 14 years ago
  87. 9ccf0b2 Blackfin: adi boards: add eon to the "all" spi flash list by Mike Frysinger · 14 years ago
  88. 945201a Blackfin: bf506f-ezkit: disable import/export env commands by Mike Frysinger · 14 years ago
  89. 14dda9d Blackfin: bf537-stamp/bf527-ad7160-eval: convert to mmc_spi by Mike Frysinger · 14 years ago
  90. 6c3eb43 bfin_spi: add spi_set_speed by Thomas Chou · 14 years ago
  91. fa1423e spi: add spi_set_speed func by Thomas Chou · 14 years ago
  92. f02efac Merge branch 'master' of git://git.denx.de/u-boot-cfi-flash by Wolfgang Denk · 13 years ago
  93. e22ba10 Merge branch 'master' of git://git.denx.de/u-boot-ppc4xx by Wolfgang Denk · 13 years ago
  94. c1fa1b7 powerpc, 8xx: Fix fallout from "Fixup all 8xx u-boot.lds scripts" by Joakim Tjernlund · 13 years ago
  95. a90b957 cfi_flash driver - Add delay after reset command by Aaron Williams · 14 years ago
  96. 5b448ad mtd, cfi: read AMD 3-byte (expanded) device ids on 16bit devices by Heiko Schocher · 14 years ago
  97. 6a011ce cfi_flash: reverse geometry for M29W800DT parts by Mike Frysinger · 14 years ago
  98. 6cfa9ee ppc4xx: Do not stop booting on any keypress on dlvision-10g by Dirk Eibach · 14 years ago
  99. 6c57c88 ppc4xx: Improve fan PWM curve on DLVision 10G by Dirk Eibach · 14 years ago
  100. 7749c84 ppc4xx: Enable MPC92469AC on DLVision 10G by Dirk Eibach · 14 years ago