1. 9c4f541 x86: qemu: Add graphics support by Bin Meng · 10 years ago
  2. 6bde2dc x86: Move FRAMEBUFFER_SET_VESA_MODE etc to video Kconfig by Bin Meng · 10 years ago
  3. b82a535 video: Kconfig: Make VESA driver avaiable for non-x86 boards by Bin Meng · 10 years ago
  4. 8feb2cc x86: Remove DECLARE_GLOBAL_DATA_PTR in board files by Bin Meng · 10 years ago
  5. 1ae5b78 x86: Update README.x86 for QEMU support by Bin Meng · 10 years ago
  6. b28c147 x86: Change coreboot default build configuration to QEMU by Bin Meng · 10 years ago
  7. 3d5bbbc x86: Set CONFIG_NR_DRAM_BANKS to 8 and move it to x86-common.h by Bin Meng · 10 years ago
  8. 99a309f x86: Make QEMU the default vendor by Bin Meng · 10 years ago
  9. a65b25d x86: Support QEMU x86 targets by Bin Meng · 10 years ago
  10. 238fe16 pci: Move pci_hose_phys_to_bus() to pci_common.c by Bin Meng · 10 years ago
  11. d8abb46 board/BuR/common: fix netconsole by Hannes Schmelzer · 9 years ago
  12. 42eccdd configs: remove CONFIG_NET_MULTI by Lars Poeschel · 9 years ago
  13. 225bf1e ARM: phytec: pcm051: Remove unneeded CONFIG_USE_IRQ by Lars Poeschel · 9 years ago
  14. 563e53e Merge branch 'master' of git://git.denx.de/u-boot-net by Tom Rini · 9 years ago
  15. 9ba9e85 net: Fix NET_RANDOM_ETHADDR dependencies by Michal Simek · 9 years ago
  16. 6eed378 net: Move the CMD_NET config to defconfigs by Joe Hershberger · 9 years ago
  17. 7453cb5 Move setexpr to Kconfig by Joe Hershberger · 10 years ago
  18. a4bdf1d blackfin: fix build error on bct-brettl2 board by Masahiro Yamada · 9 years ago
  19. 1e1f353 sparc: fix build error on gr_ep2s60 board by Masahiro Yamada · 9 years ago
  20. 656ae05 Merge branch 'rmobile' of git://git.denx.de/u-boot-sh by Tom Rini · 9 years ago
  21. c0c5341 arm: mx6: tqma6: use default CONFIG_SYS_PBSIZE by Markus Niebel · 10 years ago
  22. da2103c arm: mx6: tqma6: fix spelling error in condition by Markus Niebel · 10 years ago
  23. c2fd3f5 imx: ventana: skip mtdparts fixup if no flash by Tim Harvey · 9 years ago
  24. fdead4b imx: ventana: hang if board model could not be determined by Tim Harvey · 9 years ago
  25. 80d1a3e imx: ventana: make fdt_file1 and fdt_file2 automatic and non-overridable by Tim Harvey · 9 years ago
  26. 40c7467 imx: ventana: make model env var automatic and non-overridable by Tim Harvey · 9 years ago
  27. 9a83a81 imx: ventana: various board-specific GPIO config updates by Tim Harvey · 9 years ago
  28. 7bbc5ff mxs: Do not disable bo detection when DC-DC is already enabled by Stefan Wahren · 9 years ago
  29. a5aef73 arm: rmobile: alt: Update to QoS revision 0.31 and 0.321 by Nobuhiro Iwamatsu · 10 years ago
  30. 98c3322 arm: rmobile: gose: Update to QoS revision 0.311 by Nobuhiro Iwamatsu · 10 years ago
  31. c56af55 arm: rmobile: koelsch: Update to QoS revision 0.411 by Nobuhiro Iwamatsu · 10 years ago
  32. d20d6d7 arm: rmobile: lager: Update to QoS revision 0.973 by Nobuhiro Iwamatsu · 10 years ago
  33. cae7204 arm: rmobile: alt: Add ethernet function B support by Mitsuhiro Kimura · 10 years ago
  34. 43b1ff5 Merge branch 'master' of git://git.denx.de/u-boot-uniphier by Tom Rini · 9 years ago
  35. b1f7ecc Merge branch 'master' of http://git.denx.de/u-boot-sunxi by Tom Rini · 9 years ago
  36. fcb2525 ARM: UniPhier: add pin mux setting for NAND CS1 of PH1-Pro4 by Masahiro Yamada · 9 years ago
  37. 28148b0 ARM: UniPhier: fix pin mux setting for USB port 2 of PH1-sLD8 by Masahiro Yamada · 9 years ago
  38. 585b38c ARM: UniPhier: update DDR PHY register map for PH1-Pro5 by Masahiro Yamada · 9 years ago
  39. ece26f6 ARM: UniPhier: enable CONFIG_NET_RANDOM_ETHADDR by Masahiro Yamada · 9 years ago
  40. 7fff91f ARM: UniPhier: set MACH_PH1_PRO4 as default SoC by Masahiro Yamada · 9 years ago
  41. f8f3594 ARM: UniPhier: move CONFIG_SYS_TEXT_BASE to Kconfig by Masahiro Yamada · 9 years ago
  42. 4e143cd ARM: UniPhier: remove meaningless CONFIG_SPL_BUILD ifdefs by Masahiro Yamada · 9 years ago
  43. 9fc5f9d ARM: UniPhier: remove unnecessary cache coherency code by Masahiro Yamada · 9 years ago
  44. 12a70e3 ARM: UniPhier: use 32 bit register access for debug UART setting by Masahiro Yamada · 9 years ago
  45. b6ef3a3 ARM: UniPhier: update the vendor name of UniPhier in Kconfig by Masahiro Yamada · 9 years ago
  46. f6e7f07 ARM: UniPhier: replace <asm/io.h> with <linux/io.h> by Masahiro Yamada · 9 years ago
  47. 014414f ARM: sunxi: Enable PSCI for sun8i by Chen-Yu Tsai · 9 years ago
  48. 9816743 ARM: sunxi: Share sun6i PSCI backend with sun8i by Chen-Yu Tsai · 9 years ago
  49. cc08ea4 ARM: sunxi: Enable PSCI for sun6i by Chen-Yu Tsai · 9 years ago
  50. 073f298 ARM: sunxi: Add sun6i specific PSCI implementation by Chen-Yu Tsai · 9 years ago
  51. d4611af ARM: sunxi: Make PSCI code sun7i specific by Chen-Yu Tsai · 9 years ago
  52. 4ffd624 ARM: sunxi: Document registers in PSCI code by Chen-Yu Tsai · 9 years ago
  53. f76eba3 sunxi/nand: Add support to the SPL for loading u-boot from internal NAND memory by Daniel Kochmański · 9 years ago
  54. d0f4200 sunxi: Match sun4i, sun6i, sun9i CCI definitions for NAND and DMA by Roy Spliet · 9 years ago
  55. a19e735 sunxi: Add DMA definitions by Roy Spliet · 9 years ago
  56. 1f6f61f sunxi/nand: change BLOCK_SIZE in mksunxiboot to match NAND block size by Daniel Kochmański · 9 years ago
  57. 9d1111b sun9i: Add Merrii_A80_Optimus board / defconfig file by Hans de Goede · 10 years ago
  58. 1871a8c sun9i: Basic sun9i (A80) support by Hans de Goede · 10 years ago
  59. 77fe988 sunxi: Update sunxi-common.h to deal with different A1-SRAM base addr on sun9i by Hans de Goede · 9 years ago
  60. e049fe2 sunxi: Update sunxi-common.h to deal with different DRAM base addr on sun9i by Hans de Goede · 9 years ago
  61. 93fc39a sunxi: Remove support for building "old-fashioned" fel binaries by Hans de Goede · 9 years ago
  62. 813598e sunxi: Use axp221 sid on a33 by Hans de Goede · 9 years ago
  63. cac6d4b Merge git://git.denx.de/u-boot-usb by Tom Rini · 9 years ago
  64. 8454c84 usb: kbd: Fix key repeat not always working by Hans de Goede · 9 years ago
  65. 5cfd6c0 usb: dwc2: Add support for v3 snpsid value by Peter Griffin · 10 years ago
  66. 6a13241 ci_udc: Update the ci_udc driver to support bulk transfers by Siva Durga Prasad Paladugu · 10 years ago
  67. 126ca94 usb: Remove unused variable in usb_setup_descriptor() by Hans de Goede · 10 years ago
  68. 4c302b9 cosmetic: change Author/MAINTAINER Name from Petermaier to Schmelzer by Hannes Schmelzer · 9 years ago
  69. 012681b am33xx, spl, siemens: enable debug uart output again by Heiko Schocher · 9 years ago
  70. 062f94f net: Fix a warning added by 76ec988 by Joe Hershberger · 9 years ago
  71. 14f66d6 fsl/sata: Replace sprintf() with snprintf() by Tang Yuantian · 10 years ago
  72. 0144caf gpio: stm32: add stm32f1 support by Matt Porter · 10 years ago
  73. 2d18ef2 ARMv7M: add STM32F1 support by Matt Porter · 10 years ago
  74. f99993c common/cmd_boot: keep ARM v7M in thumb mode during do_go_exec() by Matt Porter · 10 years ago
  75. c777efe image: fix build when CONFIG_NR_DRAM_BANKS is disabled on ARM by Matt Porter · 10 years ago
  76. e390bd5 ARM: bcm283x: Switch to generic timer by Marek Vasut · 10 years ago
  77. 25a63f5 ARM: bcm283x: Reorder timer.h by Marek Vasut · 10 years ago
  78. be72355 ARM: bcm283x: Repair wdog.h by Marek Vasut · 10 years ago
  79. 1fd0f92 vexpress64: use uncompressed kernel by default by Linus Walleij · 9 years ago
  80. 3113471 kbuild: define DO_DEPS_ONLY for u-boot.cfg to fix build error by Masahiro Yamada · 9 years ago
  81. ea11b40 meminfo cmd: Enable printing >=4GiB SDRAM sizes by Andrew Bradford · 9 years ago
  82. 3bc37b6 spl: spl_mmc: Error and count distinction by Paul Kocialkowski · 9 years ago
  83. 657fd2d add test for two 'loadables' by Karl Apsite · 9 years ago
  84. d52e857 Combine bootm_find_<thing> functions together by Karl Apsite · 9 years ago
  85. 84a07db add boot_get_loadables() to load listed images by Karl Apsite · 9 years ago
  86. ecf8cd6 mkimage will now report information about loadable by Karl Apsite · 9 years ago
  87. 15b8973 powerpc: gitignore: ignore PowerPC DTBs by Masahiro Yamada · 9 years ago
  88. 4839836 tools: use pkg-config when available to get SSL flags by Thomas Petazzoni · 10 years ago
  89. af22ac6 include: introduce include/linux/io.h as a wrapper of asm/io.h by Masahiro Yamada · 10 years ago
  90. 33665f7 vexpress64: let Juno wait for root device by Linus Walleij · 10 years ago
  91. 762f98d beagle-xm: gpio_63 fix wrong pin initialization by Evgeniy Dushistov · 10 years ago
  92. d67b72d ppc: xilinx-ppc: Move to generic board support by Ricardo Ribalda · 10 years ago
  93. 68006ae warp: Fix the 'saveenv' command by Fabio Estevam · 9 years ago
  94. fdf7189 warp: Add fuse command support by Fabio Estevam · 9 years ago
  95. e6434d7 warp: Enable CONFIG_SUPPORT_EMMC_BOOT by Fabio Estevam · 9 years ago
  96. b459803 warp: Fix CONFIG_SYS_FSL_ESDHC_ADDR by Fabio Estevam · 9 years ago
  97. 825adb9 warp: Adjust CONFIG_SYS_DFU_DATA_BUF_SIZE by Fabio Estevam · 9 years ago
  98. 378b02d pci: imx: display message if no pcie link by Tim Harvey · 10 years ago
  99. 8649b40 Revert "imx: drop warning: unused variable 'max_freq'" by Stefano Babic · 9 years ago
  100. a560ad7 doc/README.generic-board: Trivial spell check by Ricardo Ribalda · 10 years ago