Gitiles
Code Review Sign In
gerrit.devboardsforandroid.linaro.org / platform / external / u-boot / fb1e3eb9eae5eda7fe9ea0efce60ae95a62d0006 / arch
  1. 4d80051 Merge branch 'master' of git://www.denx.de/git/u-boot-imx by Tom Rini · 9 years ago
  2. 943a3f2 imx: drop warning: unused variable 'max_freq' by Stefano Babic · 10 years ago
  3. 09cfa8e colibri_vf: Enable board specific USB initialisation for USB pen gpio by Sanchayan Maity · 10 years ago
  4. d470030 vf610: dts: Add device tree support by Bhuvanchandra DV · 10 years ago
  5. 508f412 arm: vf610: Add iomux support for DSPI by Bhuvanchandra DV · 10 years ago
  6. 098d858 arm: vf610: Add clock support for DSPI by Bhuvanchandra DV · 10 years ago
  7. a7b1808 colibri_vf: Add pinmux entries for GPIOs by Bhuvanchandra DV · 10 years ago
  8. d348a94 dm: gpio: vf610: Add GPIO driver support by Bhuvanchandra DV · 10 years ago
  9. 290ac3b Merge git://git.denx.de/u-boot-sunxi by Tom Rini · 10 years ago
  10. 348cce2 sunxi: Add a proper dts file for the ga10h a33 based tablet by Hans de Goede · 10 years ago
  11. d85cd29 Merge git://git.denx.de/u-boot-dm by Tom Rini · 10 years ago
  12. 8b1ba94 sunxi: Sync dts files with the linux kernel by Hans de Goede · 10 years ago
  13. 2c23da0 sunxi: Add new Mele_A1000G_quad defconfig by Hans de Goede · 10 years ago
  14. 7afebb5 sunxi: usb_phy: Swap check for disconnect threshold by Hans de Goede · 10 years ago
  15. b14d547 sandbox: Compile test device tree when CONFIG_UT_DM is defined by Simon Glass · 10 years ago
  16. 52d3bc5 sandbox: dts: Add the real-time-clock test nodes back in by Simon Glass · 10 years ago
  17. f4d8457 sandbox: dts: Sort the sandbox.dts file by Simon Glass · 10 years ago
  18. 171e991 sandbox: dts: Sort the test.dts file a little by Simon Glass · 10 years ago
  19. 8939df0 sandbox: Tidy up terminal restore by Simon Glass · 10 years ago
  20. 5318f18 x86: gpio: add pinctrl support from the device tree by Gabriel Huau · 10 years ago
  21. afbbd41 x86: baytrail: pci region 3 is not always mapped to end of ram by Andrew Bradford · 10 years ago
  22. 5c56422 x86: qemu: Implement PIRQ routing by Bin Meng · 10 years ago
  23. f2653e8 x86: coreboot: Control I/O port 0xb2 writing via device tree by Bin Meng · 10 years ago
  24. 683b09d x86: qemu: Create separate i440fx and q35 device trees by Bin Meng · 10 years ago
  25. 65cdd9b x86: coreboot: Fix cosmetic issues by Bin Meng · 10 years ago
  26. d04e30b x86: kconfig: Make FSP_TEMP_RAM_ADDR depend on HAVE_FSP by Bin Meng · 10 years ago
  27. 4be2f42 x86: qemu: Adjust VGA initialization by Bin Meng · 10 years ago
  28. 0fcb7ac x86: qemu: Enable legacy IDE I/O ports decode by Bin Meng · 10 years ago
  29. cc7debc x86: qemu: Turn on legacy segments decode by Bin Meng · 10 years ago
  30. 1dc03c2 x86: fsp_support: Correct high mem comment typo by Andrew Bradford · 10 years ago
  31. 67b2497 x86: Do sanity test on pirq table before writing by Bin Meng · 10 years ago
  32. 05b98ec x86: quark: Implement PIRQ routing by Bin Meng · 10 years ago
  33. 9c7dea6 x86: Refactor PIRQ routing support by Bin Meng · 10 years ago
  34. 9c4f541 x86: qemu: Add graphics support by Bin Meng · 10 years ago
  35. 6bde2dc x86: Move FRAMEBUFFER_SET_VESA_MODE etc to video Kconfig by Bin Meng · 10 years ago
  36. 99a309f x86: Make QEMU the default vendor by Bin Meng · 10 years ago
  37. a65b25d x86: Support QEMU x86 targets by Bin Meng · 10 years ago
  38. 656ae05 Merge branch 'rmobile' of git://git.denx.de/u-boot-sh by Tom Rini · 10 years ago
  39. 7bbc5ff mxs: Do not disable bo detection when DC-DC is already enabled by Stefan Wahren · 10 years ago
  40. a5aef73 arm: rmobile: alt: Update to QoS revision 0.31 and 0.321 by Nobuhiro Iwamatsu · 10 years ago
  41. 98c3322 arm: rmobile: gose: Update to QoS revision 0.311 by Nobuhiro Iwamatsu · 10 years ago
  42. c56af55 arm: rmobile: koelsch: Update to QoS revision 0.411 by Nobuhiro Iwamatsu · 10 years ago
  43. d20d6d7 arm: rmobile: lager: Update to QoS revision 0.973 by Nobuhiro Iwamatsu · 10 years ago
  44. 43b1ff5 Merge branch 'master' of git://git.denx.de/u-boot-uniphier by Tom Rini · 10 years ago
  45. fcb2525 ARM: UniPhier: add pin mux setting for NAND CS1 of PH1-Pro4 by Masahiro Yamada · 10 years ago
  46. 28148b0 ARM: UniPhier: fix pin mux setting for USB port 2 of PH1-sLD8 by Masahiro Yamada · 10 years ago
  47. 585b38c ARM: UniPhier: update DDR PHY register map for PH1-Pro5 by Masahiro Yamada · 10 years ago
  48. 7fff91f ARM: UniPhier: set MACH_PH1_PRO4 as default SoC by Masahiro Yamada · 10 years ago
  49. 4e143cd ARM: UniPhier: remove meaningless CONFIG_SPL_BUILD ifdefs by Masahiro Yamada · 10 years ago
  50. 9fc5f9d ARM: UniPhier: remove unnecessary cache coherency code by Masahiro Yamada · 10 years ago
  51. 12a70e3 ARM: UniPhier: use 32 bit register access for debug UART setting by Masahiro Yamada · 10 years ago
  52. b6ef3a3 ARM: UniPhier: update the vendor name of UniPhier in Kconfig by Masahiro Yamada · 10 years ago
  53. f6e7f07 ARM: UniPhier: replace <asm/io.h> with <linux/io.h> by Masahiro Yamada · 10 years ago
  54. 9816743 ARM: sunxi: Share sun6i PSCI backend with sun8i by Chen-Yu Tsai · 10 years ago
  55. 073f298 ARM: sunxi: Add sun6i specific PSCI implementation by Chen-Yu Tsai · 10 years ago
  56. d4611af ARM: sunxi: Make PSCI code sun7i specific by Chen-Yu Tsai · 10 years ago
  57. 4ffd624 ARM: sunxi: Document registers in PSCI code by Chen-Yu Tsai · 10 years ago
  58. f76eba3 sunxi/nand: Add support to the SPL for loading u-boot from internal NAND memory by Daniel Kochmański · 10 years ago
  59. d0f4200 sunxi: Match sun4i, sun6i, sun9i CCI definitions for NAND and DMA by Roy Spliet · 10 years ago
  60. a19e735 sunxi: Add DMA definitions by Roy Spliet · 10 years ago
  61. 1871a8c sun9i: Basic sun9i (A80) support by Hans de Goede · 10 years ago
  62. 93fc39a sunxi: Remove support for building "old-fashioned" fel binaries by Hans de Goede · 10 years ago
  63. 813598e sunxi: Use axp221 sid on a33 by Hans de Goede · 10 years ago
  64. 2d18ef2 ARMv7M: add STM32F1 support by Matt Porter · 10 years ago
  65. f99993c common/cmd_boot: keep ARM v7M in thumb mode during do_go_exec() by Matt Porter · 10 years ago
  66. e390bd5 ARM: bcm283x: Switch to generic timer by Marek Vasut · 10 years ago
  67. 25a63f5 ARM: bcm283x: Reorder timer.h by Marek Vasut · 10 years ago
  68. be72355 ARM: bcm283x: Repair wdog.h by Marek Vasut · 10 years ago
  69. 15b8973 powerpc: gitignore: ignore PowerPC DTBs by Masahiro Yamada · 10 years ago
  70. 8649b40 Revert "imx: drop warning: unused variable 'max_freq'" by Stefano Babic · 10 years ago
  71. a0117a5 imx: drop warning: unused variable 'max_freq' by Stefano Babic · 10 years ago
  72. 9bea236 Merge branch 'master' of git://www.denx.de/git/u-boot-imx by Tom Rini · 10 years ago
  73. 7254d92 arm, imx6: add support for aristainetos2 board by Heiko Schocher · 10 years ago
  74. e6c8b71 i2c, mxc: rework i2c base address names for different SoCs by Heiko Schocher · 10 years ago
  75. 21a2694 arm, imx6, i2c: add I2C4 for MX6DL by Heiko Schocher · 10 years ago
  76. ab87fc6 imx: dma: correct MXS_DMA_ALIGNMENT by Peng Fan · 10 years ago
  77. 95b237e ARM: zynq: add default ps7_init_gpl.c/h for Zed, MicroZed, ZC70x by Masahiro Yamada · 10 years ago
  78. 9bd53b6 ARM: zynq: add separate configuration for ZC702 and ZC706 by Masahiro Yamada · 10 years ago
  79. a2ec7fb zynq: Use system timer implementation instead of our by Michal Simek · 10 years ago
  80. a84988c Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriq by Tom Rini · 10 years ago
  81. 0d1ea05 wandboard: Switch to SPL support by Fabio Estevam · 10 years ago
  82. c0d5730 sandbox: Use defconfig to enable features by Joe Hershberger · 10 years ago
  83. a88cc3b arm/ls1021a: Remove ccsr_ddr from immap_ls102xa.h by York Sun · 10 years ago
  84. 83edb2a sunxi: video: Fix lvds panel support for sun6i+ by Hans de Goede · 10 years ago
  85. 8975cdf sunxi: Make DRAM_ODT_EN Kconfig setting a bool by Hans de Goede · 10 years ago
  86. a881db0 sunxi: Fix dram initialization not working on some a33 devices by Hans de Goede · 10 years ago
  87. 5cd83b11 sunxi: add support for UART2 on A23/A33 by Laurent Itti · 10 years ago
  88. 70caa8e imx: mx6: add display of CPU temperature grade in print_cpuinfo() by Tim Harvey · 10 years ago
  89. f0e8e89 imx: mx6: add get_cpu_temp_grade to obtain cpu temperature grade from OTP by Tim Harvey · 10 years ago
  90. b83ddac imx: mx6: display max cpu frequency in print_cpuinfo() by Tim Harvey · 10 years ago
  91. 9b9449c imx: mx6: add get_cpu_speed_grade_hz func to return MHz speed grade from OTP by Tim Harvey · 10 years ago
  92. d43e0ab mx6: add OTP bank1 registers by Tim Harvey · 10 years ago
  93. 3625fd6 arm: mx6: ddr: set fast-exit on DDR3 if pd_fast_exit specified by Tim Harvey · 10 years ago
  94. 28420e7 arm/imx-common: Fix warning 'get_reset_cause' defined but not used by Prabhakar Kushwaha · 10 years ago
  95. 7e61127 imx: mx6sx enable SION for i2c pin mux by Peng Fan · 10 years ago
  96. 0e6b7a2 Merge git://git.denx.de/u-boot-samsung by Tom Rini · 10 years ago
  97. cf85202 exynos: clock: clean up checkpatch issues by Minkyu Kang · 10 years ago
  98. 0744c2f arc: gitignore: ignore ARC DTBs by Masahiro Yamada · 10 years ago
  99. b68a5b1 arm: mx6: ddr3: Remove dead code by Nikolay Dimitrov · 10 years ago
  100. b4ed9f8 mx6: Set shared override bit in PL310 AUX_CTRL register by Fabio Estevam · 10 years ago