1. fc4dd72 ARM: OMAP5+: Remove unsed dpll structures by Lokesh Vutla · 8 years ago
  2. 584a69c ARM: OMAP4: Fix compiler warning by Lokesh Vutla · 8 years ago
  3. 40d5534 ARM: Default to using optimized memset and memcpy routines by Tom Rini · 8 years ago
  4. a4a3593 mach-omap2: Fix secure boot media generation by Andrew F. Davis · 8 years ago
  5. 17fa032 serial, ns16550: bugfix: ns16550 fifo not enabled by Heiko Schocher · 8 years ago
  6. 0675f99 Merge git://git.denx.de/u-boot-fsl-qoriq by Tom Rini · 8 years ago
  7. 0541527 kconfig: fsl PPA: move CONFIG_* to Kconfig by Hou Zhiqiang · 8 years ago
  8. daa9264 ARMv8/sec_firmware: relocated and renamed the config FSL_PPA_ARMV8_PSCI by Hou Zhiqiang · 8 years ago
  9. 0897eb2 kconfig: armv8: move armv8 sec_firmware CONFIG_* to Kconfig by Hou Zhiqiang · 8 years ago
  10. 7c5e1fe armv8: aarch64: Fix the warning about x1-x3 nonzero issue by Alison Wang · 8 years ago
  11. 2ca84bf armv8/fsl-layerscape: fdt: fixup LS1043A rev1 MSI node by Wenbin Song · 8 years ago
  12. fa18ed7 armv8/ls1043a: fixup GIC offset for ls1043a rev1 by Wenbin Song · 8 years ago
  13. 435cca1 armv8: fsl-lsch3: enable snoopable sata read and write by Tang Yuantian · 8 years ago
  14. dccef2e ls1046ardb: Add support power initialization by Hou Zhiqiang · 8 years ago
  15. 031acdb armv8/fsl_lsch2: Add chip power supply voltage setup by Hou Zhiqiang · 8 years ago
  16. 9cfab06 armv8: fsl-layerscape: Fix SECURE_BOOT config by York Sun · 8 years ago
  17. 3919935 SECURE_BOOT: Update bootscript and its hdr addresses by Udit Agarwal · 8 years ago
  18. e1f3975 armv8: ls1012a: add eSDHC nodes by Yangbo Lu · 8 years ago
  19. 3564208 armv8/fsl-lsch3: consolidate the clock system initialization by Hou Zhiqiang · 8 years ago
  20. 904110c armv8/fsl-lsch2: refactor the clock system initialization by Hou Zhiqiang · 8 years ago
  21. ee2a510 ARMv8/fsl-layerscape: Enable data coherency between cores in cluster by Hou Zhiqiang · 8 years ago
  22. 3aec452 armv8: Enable CPUECTLR.SMPEN for coherency by Mingkai Hu · 8 years ago
  23. a730587 armv8: ls1012: added usb nodes in dts by Tang Yuantian · 8 years ago
  24. 3b6bf81 armv8/fsl_lsch2: Add the OCRAM initialization by Hou Zhiqiang · 8 years ago
  25. 6930be3 ARMv8/fsl-layerscape: Correct the OCRAM size by Hou Zhiqiang · 8 years ago
  26. 19538f3 kconfig: move FSL_PCIE_COMPAT to platform Kconfig by Hou Zhiqiang · 8 years ago
  27. 2acfda1 armv8: ls2080a: Enable PCIe in defconfigs by Minghuan Lian · 8 years ago
  28. 33f61e0 armv8: ls2080a: add PCIe dts node by Minghuan Lian · 8 years ago
  29. b948a16 armv8: ls1046a: add PCIe dts node by Minghuan Lian · 8 years ago
  30. ed9bdde armv8: ls1043a: add PCIe dts node by Minghuan Lian · 8 years ago
  31. 048a045 arm: ls1012a: add PCIe dts node by Minghuan Lian · 8 years ago
  32. add73a1 arm: ls1021a: add PCIe dts node by Minghuan Lian · 8 years ago
  33. 388f386 armv8/layerscape: remove unnecessary function declares by Minghuan Lian · 8 years ago
  34. d037261 armv8: fsl-layerscape, ccn504: Set forced-order mode in RNI-6, RNI-20 by Priyanka Jain · 8 years ago
  35. 2c45f80 Merge git://git.denx.de/u-boot-samsung by Tom Rini · 8 years ago
  36. 72331fb ARM: dts: exnyos4210-universl_c210: add i2c_5 and pmic nodes by Jaehoon Chung · 8 years ago
  37. 233bc69 ARM: dts: exynos4: use the node's name for i2c by Jaehoon Chung · 8 years ago
  38. fd3b710 board: samsung: goni: fix the pmic's name for getting by Jaehoon Chung · 8 years ago
  39. 26b09c0 ARM: uniphier: move SBC and Support Card init code to U-Boot proper by Masahiro Yamada · 8 years ago
  40. a8e6300 ARM: uniphier: refactor spl_init_board() by Masahiro Yamada · 8 years ago
  41. b61664e ARM: uniphier: refactor board_init() by Masahiro Yamada · 8 years ago
  42. e94842f ARM: uniphier: make BCU init into void function by Masahiro Yamada · 8 years ago
  43. ef07a99 ARM: uniphier: refactor Support Card init code by Masahiro Yamada · 8 years ago
  44. 9e3bb84 ARM: uniphier: refactor SBC init code by Masahiro Yamada · 8 years ago
  45. 8d6c99c ARM: uniphier: refactor MEMCONF init code by Masahiro Yamada · 8 years ago
  46. 78c627c ARM: uniphier: split out UMC clock enable by Masahiro Yamada · 8 years ago
  47. a314a24 ARM: uniphier: remove unneeded argument of uniphier_ld20_pll_init() by Masahiro Yamada · 8 years ago
  48. 7a6139c ARM: dts: uniphier: add UniPhier specific compatible to eMMC node by Masahiro Yamada · 8 years ago
  49. cc422da Merge branch 'master' of git://git.denx.de/u-boot-sunxi by Tom Rini · 8 years ago
  50. 8b15f8e sunxi: dts: OrangePi Zero: add Ethernet node by Andre Przywara · 8 years ago
  51. 59603d0 sunxi: add proper device tree for Orange Pi Zero boards by Icenowy Zheng · 8 years ago
  52. 2fc554d sunxi: enable H3 EMAC for the nanopi neo by Jelle van der Waa · 8 years ago
  53. c0fa385 davinci: spl: use bootcfg to select boot device by Fabien Parent · 8 years ago
  54. 4b105f6 armv8: fix #if around spin-table code in start.S by Oded Gabbay · 8 years ago
  55. 4ac19ba arm: omap-common: add secure ROM signature verify index for AM33xx by Andrew F. Davis · 8 years ago
  56. f9dadae arm: Re-sync asm/mach-types.h with Linux Kernel v4.9 by Tom Rini · 8 years ago
  57. 9b83201 rockchip: rk3288: set isp/vop qos priority level by Nickey Yang Nickey Yang · 8 years ago
  58. 2577d3f arm64: rk3399: update rockchip_get_cru API by Kever Yang · 8 years ago
  59. f5f3de8 dts: arm64: rk3399: add max-frequency for sdhci by Kever Yang · 8 years ago
  60. 1a58146 rockchip: Fix veyron-minnie's Kconfig description by Martin Michlmayr · 8 years ago
  61. 897ddca rockchip: dts: popmetal: add usb host power supply node by Kever Yang · 8 years ago
  62. 4386feb SPL: Adjust more debug prints for ulong entry_point by Tom Rini · 8 years ago
  63. 5b30997 Merge tag 'xilinx-for-v2017.03' of git://www.denx.de/git/u-boot-microblaze by Tom Rini · 8 years ago
  64. 1d2c050 mmc: move more driver config options to Kconfig by Masahiro Yamada · 8 years ago
  65. 04770e6 Merge git://git.denx.de/u-boot-dm by Tom Rini · 8 years ago
  66. 0b84043 Merge branch 'master' of git://git.denx.de/u-boot-sunxi by Tom Rini · 8 years ago
  67. 509d4b9 ARM64: zynqmp: Generate handoff structure for ATF by Michal Simek · 8 years ago
  68. ef4cab9 ARM: zynqmp: Make SYS_VENDOR configurable by Mike Looijmans · 8 years ago
  69. de4914b ARM64: zynqmp: Fix i2c node's compatible string by Moritz Fischer · 8 years ago
  70. a765bdd net: zynq_gem: Use clock driver for ZynqMP by Siva Durga Prasad Paladugu · 8 years ago
  71. 2e15b07 ARM64: zynqmp: Add idle state for ZynqMP by Stefan Krsmanovic · 8 years ago
  72. 8925e59 ARM64: zynqmp: Fix usb nodes for dc1 and dc2 by Michal Simek · 9 years ago
  73. 7876dcb ARM64: zynqmp: Add missing earlycon for ep108 by Michal Simek · 8 years ago
  74. 14de6c4 ARM64: zynqmp: clk: Add the clock for watchdog by Shubhrajyoti Datta · 8 years ago
  75. a930ca5 ARM: dts: zynq: replace gpio-key,wakeup with wakeup-source property by Sudeep Holla · 9 years ago
  76. 5af46ca ARM: zynq: Remove spi-max-frequency by Michal Simek · 8 years ago
  77. ba7916c am33xx: board: init usb ether gadget for rndis support by Mugunthan V N · 8 years ago
  78. 4d82c4b am335x: configs: Use ISW_ENTRY_ADDR to set SPL_TEXT_BASE by Andrew F. Davis · 8 years ago
  79. 7410f14 arm: mach-omap2: Fix secure file generation by Andrew F. Davis · 8 years ago
  80. 0ed06c7 Merge branch 'master' of git://git.denx.de/u-boot-tegra by Tom Rini · 8 years ago
  81. 66e399b ddr: fsl: Move macro CONFIG_NUM_DDR_CONTROLLERS to Kconfig by York Sun · 8 years ago
  82. c01e4a1 mmc: move CONFIG_SYS_FSL_ERRATUM_ESDHC* to Kconfig by York Sun · 8 years ago
  83. ba1b6fb arm: layerscape: Move CONFIG_SYS_FSL_ERRATUM_* to Kconfig by York Sun · 8 years ago
  84. d26e34c fsl_ddr: Move DDR config options to driver Kconfig by York Sun · 8 years ago
  85. 90b8038 crypto: Move CONFIG_SYS_FSL_SEC_LE and _BE to Kconfig by York Sun · 8 years ago
  86. 2c2e2c9 crypto: Move SYS_FSL_SEC_COMPAT into driver Kconfig by York Sun · 8 years ago
  87. eb77f5c sunxi: A64: enable SPL by Andre Przywara · 8 years ago
  88. 3a21756 sunxi: DRAM: fix H3 DRAM size display on aarch64 by Andre Przywara · 8 years ago
  89. ed25486 sunxi: H3/A64: fix non-ODT setting by Andre Przywara · 8 years ago
  90. 1bc464b sunxi: A64: use H3 DRAM initialization code for A64 as well by Jens Kuske · 8 years ago
  91. b556159 sunxi: clocks: Use the correct pattern register for PLL11 by Philipp Tomsich · 8 years ago
  92. e013bea sunxi: H3: add DRAM controller single bit delay support by Jens Kuske · 8 years ago
  93. 0eb6f9f sunxi: H3: add and rename some DRAM contoller registers by Jens Kuske · 8 years ago
  94. dcb5009 sunxi: H3: Rework MBUS priority setup by Philipp Tomsich · 8 years ago
  95. 83843c9 sunxi: A64: do an RMR switch if started in AArch32 mode by Andre Przywara · 8 years ago
  96. ce62e57 ARM: boot0 hook: remove macro, include whole header file by Andre Przywara · 8 years ago
  97. a5168a5 armv8: move reset branch into boot hook by Andre Przywara · 8 years ago
  98. 8ed02bc armv8: add simple sdelay implementation by Andre Przywara · 8 years ago
  99. 11e1479 SPL: make struct spl_image 64-bit safe by Andre Przywara · 8 years ago
  100. 2a6713b move UL() macro from armv8/mmu.h into common.h by Andre Przywara · 8 years ago