blob: 765eaaf0fb59b98074e8516df6b015ed1a577e1d [file] [log] [blame]
wdenk3a473b22004-01-03 00:43:19 +00001/*
2 * (C) Copyright 2001
3 * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
4 *
5 * See file CREDITS for list of people who contributed to this
6 * project.
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21 * MA 02111-1307 USA
22 */
23
24/*
25 * board/config.h - configuration options, board specific
26 */
27
28#ifndef __CONFIG_H
29#define __CONFIG_H
30
wdenk3a473b22004-01-03 00:43:19 +000031/* This define must be before the core.h include */
32#define CONFIG_DB64460 1 /* this is an DB64460 board */
33
34#ifndef __ASSEMBLY__
35#include "../board/Marvell/include/core.h"
36#endif
37
38/*-----------------------------------------------------*/
39/* #include "../board/db64460/local.h" */
40#ifndef __LOCAL_H
41#define __LOCAL_H
42
43#define CONFIG_ETHADDR 64:46:00:00:00:01
wdenke2ffd592004-12-31 09:32:47 +000044#define CONFIG_HAS_ETH1
wdenk3a473b22004-01-03 00:43:19 +000045#define CONFIG_ETH1ADDR 64:46:00:00:00:02
wdenke2ffd592004-12-31 09:32:47 +000046#define CONFIG_HAS_ETH2
wdenk3a473b22004-01-03 00:43:19 +000047#define CONFIG_ETH2ADDR 64:46:00:00:00:03
48
49#define CONFIG_ENV_OVERWRITE
50#endif /* __CONFIG_H */
51
52/*
53 * High Level Configuration Options
54 * (easy to change)
55 */
56
57#define CONFIG_74xx /* we have a 750FX (override local.h) */
58
59#define CONFIG_DB64460 1 /* this is an DB64460 board */
60
61#define CONFIG_BAUDRATE 115200 /* console baudrate = 115000 */
62/*ronen - we don't use the global CONFIG_ECC, since in the global ecc we initialize the
63 DRAM for ECC in the phase we are relocating to it, which isn't so sufficient.
64 so we will define our ECC CONFIG and initilize the DRAM for ECC in the DRAM initialization phase,
65 see sdram_init.c */
66#undef CONFIG_ECC /* enable ECC support */
67#define CONFIG_MV64460_ECC
68
69/* which initialization functions to call for this board */
70#define CONFIG_MISC_INIT_R /* initialize the icache L1 */
wdenkc837dcb2004-01-20 23:12:12 +000071#define CONFIG_BOARD_EARLY_INIT_F
wdenk3a473b22004-01-03 00:43:19 +000072
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020073#define CONFIG_SYS_BOARD_NAME "DB64460"
wdenk3a473b22004-01-03 00:43:19 +000074#define CONFIG_IDENT_STRING "Marvell DB64460 (1.0)"
75
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020076/*#define CONFIG_SYS_HUSH_PARSER */
77#undef CONFIG_SYS_HUSH_PARSER
wdenk3a473b22004-01-03 00:43:19 +000078
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020079#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
wdenk3a473b22004-01-03 00:43:19 +000080
81/*
82 * The following defines let you select what serial you want to use
83 * for your console driver.
84 *
85 * what to do:
86 * to use the DUART, undef CONFIG_MPSC. If you have hacked a serial
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020087 * cable onto the second DUART channel, change the CONFIG_SYS_DUART port from 1
wdenk3a473b22004-01-03 00:43:19 +000088 * to 0 below.
89 *
90 * to use the MPSC, #define CONFIG_MPSC. If you have wired up another
91 * mpsc channel, change CONFIG_MPSC_PORT to the desired value.
92 */
93
94#define CONFIG_MPSC_PORT 0
95
96/* to change the default ethernet port, use this define (options: 0, 1, 2) */
97#define CONFIG_NET_MULTI
98#define MV_ETH_DEVS 3
99
100/* #undef CONFIG_ETHER_PORT_MII */
101#if 0
102#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
103#else
104#define CONFIG_BOOTDELAY 3 /* autoboot after 5 seconds */
105#endif
106#define CONFIG_ZERO_BOOTDELAY_CHECK
107
108
109#undef CONFIG_BOOTARGS
Wolfgang Denk32bf3d12008-03-03 12:16:44 +0100110/*#define CONFIG_PREBOOT "echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo" */
wdenk3a473b22004-01-03 00:43:19 +0000111
112/* ronen - autoboot using tftp */
113#if (CONFIG_BOOTDELAY >= 0)
114#define CONFIG_BOOTCOMMAND "tftpboot 0x400000 uImage;\
Wolfgang Denkfe126d82005-11-20 21:40:11 +0100115 setenv bootargs ${bootargs} ${bootargs_root} nfsroot=${serverip}:${rootpath} \
116 ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000; "
wdenk3a473b22004-01-03 00:43:19 +0000117
118#define CONFIG_BOOTARGS "console=ttyS0,115200"
119
120#endif
121
122/* ronen - the u-boot.bin should be ~0x30000 bytes */
123#define CONFIG_EXTRA_ENV_SETTINGS \
124 "burn_uboot_sep= tftp 100000 u-boot.bin;protect off all;era FFF00000 FFF4ffff; \
125cp.b 100000 FFF00000 0x40000;protect on 1:0-4;\0" \
126 "burn_uboot_dep= tftp 100000 u-boot.bin;protect off all;era FFF00000 FFF7ffff; \
127cp.b 100000 FFF00000 0x40000;protect on 1:0-7;\0" \
128 "bootargs_root=root=/dev/nfs rw\0" \
129 "bootargs_end=:::DB64460:eth0:none \0"\
130 "ethprime=mv_enet0\0"\
Wolfgang Denkfe126d82005-11-20 21:40:11 +0100131 "standalone=fsload 0x400000 uImage;setenv bootargs ${bootargs} root=/dev/mtdblock/0 rw \
132ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0"
wdenk3a473b22004-01-03 00:43:19 +0000133
134/* --------------------------------------------------------------------------------------------------------------- */
135/* New bootcommands for Marvell DB64460 c 2002 Ingo Assmus */
136
137#define CONFIG_IPADDR 10.2.40.90
138
139#define CONFIG_SERIAL "No. 1"
140#define CONFIG_SERVERIP 10.2.1.126
141#define CONFIG_ROOTPATH /mnt/yellow_dog_mini
142
143
144#define CONFIG_TESTDRAMDATA y
145#define CONFIG_TESTDRAMADDRESS n
146#define CONFIG_TESETDRAMWALK n
147
148/* --------------------------------------------------------------------------------------------------------------- */
149
150#define CONFIG_LOADS_ECHO 0 /* echo off for serial download */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200151#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate changes */
wdenk3a473b22004-01-03 00:43:19 +0000152
153#undef CONFIG_WATCHDOG /* watchdog disabled */
154#undef CONFIG_ALTIVEC /* undef to disable */
155
Jon Loeliger5d2ebe12007-07-09 21:16:53 -0500156/*
157 * BOOTP options
158 */
159#define CONFIG_BOOTP_SUBNETMASK
160#define CONFIG_BOOTP_GATEWAY
161#define CONFIG_BOOTP_HOSTNAME
162#define CONFIG_BOOTP_BOOTPATH
163#define CONFIG_BOOTP_BOOTFILESIZE
164
165
Wolfgang Denk700a0c62005-08-08 01:03:24 +0200166/*
167 * JFFS2 partitions
168 *
169 */
170/* No command line, one static partition, whole device */
Stefan Roese68d7d652009-03-19 13:30:36 +0100171#undef CONFIG_CMD_MTDPARTS
Wolfgang Denk700a0c62005-08-08 01:03:24 +0200172#define CONFIG_JFFS2_DEV "nor1"
173#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF
174#define CONFIG_JFFS2_PART_OFFSET 0x00000000
wdenk3a473b22004-01-03 00:43:19 +0000175
Wolfgang Denk700a0c62005-08-08 01:03:24 +0200176/* mtdparts command line support */
177
178/* Use first bank for JFFS2, second bank contains U-Boot.
179 *
180 * Note: fake mtd_id's used, no linux mtd map file.
181 */
182/*
Stefan Roese68d7d652009-03-19 13:30:36 +0100183#define CONFIG_CMD_MTDPARTS
Wolfgang Denk700a0c62005-08-08 01:03:24 +0200184#define MTDIDS_DEFAULT "nor1=db64460-1"
185#define MTDPARTS_DEFAULT "mtdparts=db64460-1:-(jffs2)"
186*/
wdenk3a473b22004-01-03 00:43:19 +0000187
wdenk3a473b22004-01-03 00:43:19 +0000188
Jon Loeliger3c3227f2007-07-07 20:40:43 -0500189/*
190 * Command line configuration.
191 */
192#include <config_cmd_default.h>
193
194#define CONFIG_CMD_ASKENV
195#define CONFIG_CMD_I2C
196#define CONFIG_CMD_EEPROM
197#define CONFIG_CMD_CACHE
198#define CONFIG_CMD_JFFS2
199#define CONFIG_CMD_PCI
200#define CONFIG_CMD_NET
201
wdenk3a473b22004-01-03 00:43:19 +0000202
203/*
204 * Miscellaneous configurable options
205 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200206#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
207#define CONFIG_SYS_I2C_MULTI_EEPROMS
208#define CONFIG_SYS_I2C_SPEED 40000 /* I2C speed default */
wdenk3a473b22004-01-03 00:43:19 +0000209
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200210/* #define CONFIG_SYS_GT_DUAL_CPU also for JTAG even with one cpu */
211#define CONFIG_SYS_LONGHELP /* undef to save memory */
212#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
Jon Loeliger3c3227f2007-07-07 20:40:43 -0500213#if defined(CONFIG_CMD_KGDB)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200214#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
wdenk3a473b22004-01-03 00:43:19 +0000215#else
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200216#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
wdenk3a473b22004-01-03 00:43:19 +0000217#endif
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200218#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
219#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
220#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
wdenk3a473b22004-01-03 00:43:19 +0000221
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200222/*#define CONFIG_SYS_MEMTEST_START 0x00400000 memtest works on */
223/*#define CONFIG_SYS_MEMTEST_END 0x00C00000 4 ... 12 MB in DRAM */
224/*#define CONFIG_SYS_MEMTEST_END 0x07c00000 4 ... 124 MB in DRAM */
wdenk3a473b22004-01-03 00:43:19 +0000225
226/*
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200227#define CONFIG_SYS_DRAM_TEST
wdenk3a473b22004-01-03 00:43:19 +0000228 * DRAM tests
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200229 * CONFIG_SYS_DRAM_TEST - enables the following tests.
wdenk3a473b22004-01-03 00:43:19 +0000230 *
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200231 * CONFIG_SYS_DRAM_TEST_DATA - Enables test for shorted or open data lines
wdenk3a473b22004-01-03 00:43:19 +0000232 * Environment variable 'test_dram_data' must be
233 * set to 'y'.
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200234 * CONFIG_SYS_DRAM_TEST_DATA - Enables test to verify that each word is uniquely
wdenk3a473b22004-01-03 00:43:19 +0000235 * addressable. Environment variable
236 * 'test_dram_address' must be set to 'y'.
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200237 * CONFIG_SYS_DRAM_TEST_WALK - Enables test a 64-bit walking ones pattern test.
wdenk3a473b22004-01-03 00:43:19 +0000238 * This test takes about 6 minutes to test 64 MB.
239 * Environment variable 'test_dram_walk' must be
240 * set to 'y'.
241 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200242#define CONFIG_SYS_DRAM_TEST
243#if defined(CONFIG_SYS_DRAM_TEST)
244#define CONFIG_SYS_MEMTEST_START 0x00400000 /* memtest works on */
245/* #define CONFIG_SYS_MEMTEST_END 0x00C00000 4 ... 12 MB in DRAM */
246#define CONFIG_SYS_MEMTEST_END 0x07c00000 /* 4 ... 124 MB in DRAM */
247#define CONFIG_SYS_DRAM_TEST_DATA
248#define CONFIG_SYS_DRAM_TEST_ADDRESS
249#define CONFIG_SYS_DRAM_TEST_WALK
250#endif /* CONFIG_SYS_DRAM_TEST */
wdenk3a473b22004-01-03 00:43:19 +0000251
252#undef CONFIG_DISPLAY_MEMMAP /* at the end of the bootprocess show the memory map */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200253#undef CONFIG_SYS_DISPLAY_DIMM_SPD_CONTENT /* show SPD content during boot */
wdenk3a473b22004-01-03 00:43:19 +0000254
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200255#define CONFIG_SYS_LOAD_ADDR 0x00400000 /* default load address */
wdenk3a473b22004-01-03 00:43:19 +0000256
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200257#define CONFIG_SYS_HZ 1000 /* decr freq: 1ms ticks */
wdenk3a473b22004-01-03 00:43:19 +0000258/*ronen - this the Sys clock (cpu bus,internal dram and SDRAM) */
Wolfgang Denkee80fa72010-06-13 18:38:23 +0200259#define CONFIG_SYS_BUS_CLK 133000000 /* 133 MHz (CPU = 5*Bus = 666MHz) */
wdenk3a473b22004-01-03 00:43:19 +0000260
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200261#define CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_LOP 7 /* define the SDRAM cycle count */
262#define CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_ROP 50 /* for 200MHZ -> 5.0 ns, 166MHZ -> 6.0, 133MHZ -> 7.50 ns */
wdenk3a473b22004-01-03 00:43:19 +0000263
264/*ronen - this is the Tclk (MV64460 core) */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200265#define CONFIG_SYS_TCLK 133000000
wdenk3a473b22004-01-03 00:43:19 +0000266
267
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200268#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
wdenk3a473b22004-01-03 00:43:19 +0000269
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200270#define CONFIG_SYS_750FX_HID0 0x8000c084
271#define CONFIG_SYS_750FX_HID1 0x54800000
272#define CONFIG_SYS_750FX_HID2 0x00000000
wdenk3a473b22004-01-03 00:43:19 +0000273
274/*
275 * Low Level Configuration Settings
276 * (address mappings, register initial values, etc.)
277 * You should know what you are doing if you make changes here.
278 */
279
280/*-----------------------------------------------------------------------
281 * Definitions for initial stack pointer and data area
282 */
283
284/*
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200285 * When locking data in cache you should point the CONFIG_SYS_INIT_RAM_ADDRESS
wdenk3a473b22004-01-03 00:43:19 +0000286 * To an unused memory region. The stack will remain in cache until RAM
287 * is initialized
288*/
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200289#define CONFIG_SYS_INIT_RAM_LOCK
290#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 /* unused memory region */
291#define CONFIG_SYS_INIT_RAM_END 0x1000
292#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for init data */
293#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
wdenk3a473b22004-01-03 00:43:19 +0000294
295#define RELOCATE_INTERNAL_RAM_ADDR
296#ifdef RELOCATE_INTERNAL_RAM_ADDR
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200297 #define CONFIG_SYS_INTERNAL_RAM_ADDR 0xf8000000
wdenk3a473b22004-01-03 00:43:19 +0000298#endif
299
300/*-----------------------------------------------------------------------
301 * Start addresses for the final memory configuration
302 * (Set up by the startup code)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200303 * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
wdenk3a473b22004-01-03 00:43:19 +0000304 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200305#define CONFIG_SYS_SDRAM_BASE 0x00000000
wdenk3a473b22004-01-03 00:43:19 +0000306/* Dummies for BAT 4-7 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200307#define CONFIG_SYS_SDRAM1_BASE 0x10000000 /* each 256 MByte */
308#define CONFIG_SYS_SDRAM2_BASE 0x20000000
309#define CONFIG_SYS_SDRAM3_BASE 0x30000000
310#define CONFIG_SYS_SDRAM4_BASE 0x40000000
311#define CONFIG_SYS_FLASH_BASE 0xfff00000
wdenk3a473b22004-01-03 00:43:19 +0000312
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200313#define CONFIG_SYS_DFL_BOOTCS_BASE 0xff800000
wdenk3a473b22004-01-03 00:43:19 +0000314#define CONFIG_VERY_BIG_RAM /* we will use up to 256M memory for cause we are short of BATS*/
315
316#define BRIDGE_REG_BASE_BOOTM 0xfbe00000 /* this paramaters are used when booting the linux kernel */
317#define UART_BASE_BOOTM 0xfbb00000 /* in order to be sync with the kernel parameters. */
318#define PCI0_IO_BASE_BOOTM 0xfd000000
319
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200320#define CONFIG_SYS_RESET_ADDRESS 0xfff00100
321#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
322#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
323#define CONFIG_SYS_MALLOC_LEN (256 << 10) /* Reserve 256 kB for malloc */
wdenk3a473b22004-01-03 00:43:19 +0000324
325/* areas to map different things with the GT in physical space */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200326#define CONFIG_SYS_DRAM_BANKS 4
wdenk3a473b22004-01-03 00:43:19 +0000327
328/* What to put in the bats. */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200329#define CONFIG_SYS_MISC_REGION_BASE 0xf0000000
wdenk3a473b22004-01-03 00:43:19 +0000330
331/* Peripheral Device section */
332
333/*******************************************************/
334/* We have on the db64460 Board : */
335/* GT-Chipset Register Area */
336/* GT-Chipset internal SRAM 256k */
337/* SRAM on external device module */
338/* Real time clock on external device module */
339/* dobble UART on external device module */
340/* Data flash on external device module */
341/* Boot flash on external device module */
342/*******************************************************/
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200343#define CONFIG_SYS_DFL_GT_REGS 0x14000000 /* boot time GT_REGS */
344#define CONFIG_SYS_DB64460_RESET_ADDR 0x14000000 /* After power on Reset the DB64460 is here */
wdenk3a473b22004-01-03 00:43:19 +0000345
346/*++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200347#define CONFIG_SYS_GT_REGS 0xf1000000 /* GT Registers will be mapped here */
348#define CONFIG_SYS_DEV_BASE 0xfc000000 /* GT Devices CS start here */
wdenk3a473b22004-01-03 00:43:19 +0000349
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200350#define CONFIG_SYS_DEV0_SPACE CONFIG_SYS_DEV_BASE /* DEV_CS0 device modul sram */
351#define CONFIG_SYS_DEV1_SPACE (CONFIG_SYS_DEV0_SPACE + CONFIG_SYS_DEV0_SIZE) /* DEV_CS1 device modul real time clock (rtc) */
352#define CONFIG_SYS_DEV2_SPACE (CONFIG_SYS_DEV1_SPACE + CONFIG_SYS_DEV1_SIZE) /* DEV_CS2 device modul doubel uart (duart) */
353#define CONFIG_SYS_DEV3_SPACE (CONFIG_SYS_DEV2_SPACE + CONFIG_SYS_DEV2_SIZE) /* DEV_CS3 device modul large flash */
wdenk3a473b22004-01-03 00:43:19 +0000354
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200355#define CONFIG_SYS_DEV0_SIZE _8M /* db64460 sram @ 0xfc00.0000 */
356#define CONFIG_SYS_DEV1_SIZE _8M /* db64460 rtc @ 0xfc80.0000 */
357#define CONFIG_SYS_DEV2_SIZE _16M /* db64460 duart @ 0xfd00.0000 */
358#define CONFIG_SYS_DEV3_SIZE _16M /* db64460 flash @ 0xfe00.0000 */
wdenk3a473b22004-01-03 00:43:19 +0000359/*++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
360
361/* Reset values for Port behavior (8bit/ 32bit, etc.) only corrected by device width */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200362#define CONFIG_SYS_DEV0_PAR 0x8FEFFFFF /* 32Bit sram */
363#define CONFIG_SYS_DEV1_PAR 0x8FCFFFFF /* 8Bit rtc */
364#define CONFIG_SYS_DEV2_PAR 0x8FCFFFFF /* 8Bit duart */
365#define CONFIG_SYS_8BIT_BOOT_PAR 0x8FCFFFFF /* 8Bit flash */
366#define CONFIG_SYS_32BIT_BOOT_PAR 0x8FEFFFFF /* 32Bit flash */
wdenk3a473b22004-01-03 00:43:19 +0000367
368 /* c 4 a 8 2 4 1 c */
369 /* 33 22|2222|22 22|111 1|11 11|1 1 | | */
370 /* 10 98|7654|32 10|987 6|54 32|1 098|7 654|3 210 */
371 /* 11|00|0100|10 10|100|0 00|10 0|100 0|001 1|100 */
372 /* 3| 0|.... ..| 2| 4 | 0 | 4 | 8 | 3 | 4 */
373
374
375/* ronen - update MPP Control MV64460*/
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200376#define CONFIG_SYS_MPP_CONTROL_0 0x02222222
377#define CONFIG_SYS_MPP_CONTROL_1 0x11333011
378#define CONFIG_SYS_MPP_CONTROL_2 0x40431111
379#define CONFIG_SYS_MPP_CONTROL_3 0x00000044
wdenk3a473b22004-01-03 00:43:19 +0000380
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200381/*# define CONFIG_SYS_SERIAL_PORT_MUX 0x00000102 0=hiZ 1=MPSC0 2=ETH 0 and 2 RMII */
wdenk3a473b22004-01-03 00:43:19 +0000382
383
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200384# define CONFIG_SYS_GPP_LEVEL_CONTROL 0x2c600000 /* 1111 1001 0000 1111 1100 0000 0000 0000*/
wdenk3a473b22004-01-03 00:43:19 +0000385 /* gpp[31] gpp[30] gpp[29] gpp[28] */
386 /* gpp[27] gpp[24]*/
387 /* gpp[19:14] */
388
389/* setup new config_value for MV64460 DDR-RAM !! */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200390# define CONFIG_SYS_SDRAM_CONFIG 0x58200400 /* 0x1400 copied from Dink32 bzw. VxWorks*/
wdenk3a473b22004-01-03 00:43:19 +0000391
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200392#define CONFIG_SYS_DUART_IO CONFIG_SYS_DEV2_SPACE
393#define CONFIG_SYS_DUART_CHAN 1 /* channel to use for console */
394#define CONFIG_SYS_INIT_CHAN1
395#define CONFIG_SYS_INIT_CHAN2
wdenk3a473b22004-01-03 00:43:19 +0000396
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200397#define SRAM_BASE CONFIG_SYS_DEV0_SPACE
wdenk3a473b22004-01-03 00:43:19 +0000398#define SRAM_SIZE 0x00100000 /* 1 MB of sram */
399
400
401/*-----------------------------------------------------------------------
402 * PCI stuff
403 *-----------------------------------------------------------------------
404 */
405
406#define PCI_HOST_ADAPTER 0 /* configure ar pci adapter */
407#define PCI_HOST_FORCE 1 /* configure as pci host */
408#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
409
410#define CONFIG_PCI /* include pci support */
411#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */
412#define CONFIG_PCI_PNP /* do pci plug-and-play */
413#define CONFIG_EEPRO100 /* ronen - Support for Intel 82557/82559/82559ER chips */
414
415/* PCI MEMORY MAP section */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200416#define CONFIG_SYS_PCI0_MEM_BASE 0x80000000
417#define CONFIG_SYS_PCI0_MEM_SIZE _128M
418#define CONFIG_SYS_PCI1_MEM_BASE 0x88000000
419#define CONFIG_SYS_PCI1_MEM_SIZE _128M
wdenk3a473b22004-01-03 00:43:19 +0000420
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200421#define CONFIG_SYS_PCI0_0_MEM_SPACE (CONFIG_SYS_PCI0_MEM_BASE)
422#define CONFIG_SYS_PCI1_0_MEM_SPACE (CONFIG_SYS_PCI1_MEM_BASE)
wdenk3a473b22004-01-03 00:43:19 +0000423
424/* PCI I/O MAP section */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200425#define CONFIG_SYS_PCI0_IO_BASE 0xfa000000
426#define CONFIG_SYS_PCI0_IO_SIZE _16M
427#define CONFIG_SYS_PCI1_IO_BASE 0xfb000000
428#define CONFIG_SYS_PCI1_IO_SIZE _16M
wdenk3a473b22004-01-03 00:43:19 +0000429
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200430#define CONFIG_SYS_PCI0_IO_SPACE (CONFIG_SYS_PCI0_IO_BASE)
431#define CONFIG_SYS_PCI0_IO_SPACE_PCI (CONFIG_SYS_PCI0_IO_BASE) /* ronen we want phy=bus 0x00000000 */
432#define CONFIG_SYS_PCI1_IO_SPACE (CONFIG_SYS_PCI1_IO_BASE)
433#define CONFIG_SYS_PCI1_IO_SPACE_PCI (CONFIG_SYS_PCI1_IO_BASE) /* ronen we want phy=bus 0x00000000 */
wdenk3a473b22004-01-03 00:43:19 +0000434
435#if defined (CONFIG_750CX)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200436#define CONFIG_SYS_PCI_IDSEL 0x0
wdenk3a473b22004-01-03 00:43:19 +0000437#else
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200438#define CONFIG_SYS_PCI_IDSEL 0x30
wdenk3a473b22004-01-03 00:43:19 +0000439#endif
440/*----------------------------------------------------------------------
441 * Initial BAT mappings
442 */
443
444/* NOTES:
445 * 1) GUARDED and WRITE_THRU not allowed in IBATS
446 * 2) CACHEINHIBIT and WRITETHROUGH not allowed together in same BAT
447 */
448
449/* SDRAM */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200450#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
451#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
452#define CONFIG_SYS_DBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
453#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U
wdenk3a473b22004-01-03 00:43:19 +0000454
455/* init ram */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200456#define CONFIG_SYS_IBAT1L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE)
457#define CONFIG_SYS_IBAT1U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_256K | BATU_VS | BATU_VP)
458#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L
459#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U
wdenk3a473b22004-01-03 00:43:19 +0000460
461/* PCI0, PCI1 in one BAT */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200462#define CONFIG_SYS_IBAT2L BATL_NO_ACCESS
463#define CONFIG_SYS_IBAT2U CONFIG_SYS_DBAT2U
464#define CONFIG_SYS_DBAT2L (CONFIG_SYS_PCI0_MEM_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE)
465#define CONFIG_SYS_DBAT2U (CONFIG_SYS_PCI0_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
wdenk3a473b22004-01-03 00:43:19 +0000466
467/* GT regs, bootrom, all the devices, PCI I/O */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200468#define CONFIG_SYS_IBAT3L (CONFIG_SYS_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW)
469#define CONFIG_SYS_IBAT3U (CONFIG_SYS_MISC_REGION_BASE | BATU_VS | BATU_VP | BATU_BL_256M)
470#define CONFIG_SYS_DBAT3L (CONFIG_SYS_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE)
471#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
wdenk3a473b22004-01-03 00:43:19 +0000472
473/* I2C addresses for the two DIMM SPD chips */
474#define DIMM0_I2C_ADDR 0x56
475#define DIMM1_I2C_ADDR 0x54
476
477/*
478 * For booting Linux, the board info and command line data
479 * have to be in the first 8 MB of memory, since this is
480 * the maximum mapped by the Linux kernel during initialization.
481 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200482#define CONFIG_SYS_BOOTMAPSZ (8<<20) /* Initial Memory map for Linux */
wdenk3a473b22004-01-03 00:43:19 +0000483
484/*-----------------------------------------------------------------------
485 * FLASH organization
486 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200487#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */
488#define CONFIG_SYS_MAX_FLASH_SECT 67 /* max number of sectors on one chip */
wdenk3a473b22004-01-03 00:43:19 +0000489
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200490#define CONFIG_SYS_EXTRA_FLASH_DEVICE DEVICE3 /* extra flash at device 3 */
491#define CONFIG_SYS_EXTRA_FLASH_WIDTH 4 /* 32 bit */
492#define CONFIG_SYS_BOOT_FLASH_WIDTH 1 /* 8 bit */
wdenk3a473b22004-01-03 00:43:19 +0000493
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200494#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
495#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
496#define CONFIG_SYS_FLASH_LOCK_TOUT 500 /* Timeout for Flash Lock (in ms) */
497#define CONFIG_SYS_FLASH_CFI 1
wdenk3a473b22004-01-03 00:43:19 +0000498
Jean-Christophe PLAGNIOL-VILLARD5a1aceb2008-09-10 22:48:04 +0200499#define CONFIG_ENV_IS_IN_FLASH 1
Jean-Christophe PLAGNIOL-VILLARD0e8d1582008-09-10 22:48:06 +0200500#define CONFIG_ENV_SIZE 0x1000 /* Total Size of Environment Sector */
501#define CONFIG_ENV_SECT_SIZE 0x10000
502#define CONFIG_ENV_ADDR 0xFFF78000 /* Marvell 8-Bit Bootflash last sector */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200503/* #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE+CONFIG_SYS_MONITOR_LEN-CONFIG_ENV_SECT_SIZE) */
wdenk3a473b22004-01-03 00:43:19 +0000504
505/*-----------------------------------------------------------------------
506 * Cache Configuration
507 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200508#define CONFIG_SYS_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */
Jon Loeliger3c3227f2007-07-07 20:40:43 -0500509#if defined(CONFIG_CMD_KGDB)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200510#define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
wdenk3a473b22004-01-03 00:43:19 +0000511#endif
512
513/*-----------------------------------------------------------------------
514 * L2CR setup -- make sure this is right for your board!
515 * look in include/mpc74xx.h for the defines used here
516 */
517
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200518#define CONFIG_SYS_L2
wdenk3a473b22004-01-03 00:43:19 +0000519
520
521#if defined (CONFIG_750CX) || defined (CONFIG_750FX)
522#define L2_INIT 0
523#else
524
525#define L2_INIT 0
526/*
527#define L2_INIT (L2CR_L2SIZ_2M | L2CR_L2CLK_3 | L2CR_L2RAM_BURST | \
528 L2CR_L2OH_5 | L2CR_L2CTL | L2CR_L2WT)
529*/
530#endif
531
532#define L2_ENABLE (L2_INIT | L2CR_L2E)
533
534/*
535 * Internal Definitions
536 *
537 * Boot Flags
538 */
539#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
540#define BOOTFLAG_WARM 0x02 /* Software reboot */
541
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200542#define CONFIG_SYS_BOARD_ASM_INIT 1
wdenk3a473b22004-01-03 00:43:19 +0000543
544#endif /* __CONFIG_H */