Tom Rini | 83d290c | 2018-05-06 17:58:06 -0400 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0+ |
Hannes Petermaier | 3c5fabd | 2014-03-06 14:39:06 +0100 | [diff] [blame] | 2 | /* |
Hannes Schmelzer | e880a5e | 2018-01-09 19:01:32 +0100 | [diff] [blame] | 3 | * Copyright (C) 2013-2018 Hannes Schmelzer <oe5hpm@oevsv.at> |
| 4 | * B&R Industrial Automation GmbH - http://www.br-automation.com |
Hannes Petermaier | 3c5fabd | 2014-03-06 14:39:06 +0100 | [diff] [blame] | 5 | * |
| 6 | * minimal framebuffer driver for TI's AM335x SoC to be compatible with |
| 7 | * Wolfgang Denk's LCD-Framework (CONFIG_LCD, common/lcd.c) |
| 8 | * |
Martin Pietryka | 7d04517 | 2016-04-27 21:39:15 +0200 | [diff] [blame] | 9 | * - supporting 16/24/32bit RGB/TFT raster Mode (not using palette) |
Hannes Petermaier | 3c5fabd | 2014-03-06 14:39:06 +0100 | [diff] [blame] | 10 | * - sets up LCD controller as in 'am335x_lcdpanel' struct given |
| 11 | * - starts output DMA from gd->fb_base buffer |
Hannes Petermaier | 3c5fabd | 2014-03-06 14:39:06 +0100 | [diff] [blame] | 12 | */ |
| 13 | #include <common.h> |
Hannes Schmelzer | 8a094f5 | 2018-01-09 19:01:34 +0100 | [diff] [blame] | 14 | #include <asm/io.h> |
Hannes Petermaier | 3c5fabd | 2014-03-06 14:39:06 +0100 | [diff] [blame] | 15 | #include <asm/arch/hardware.h> |
Hannes Schmelzer | 8a094f5 | 2018-01-09 19:01:34 +0100 | [diff] [blame] | 16 | #include <asm/arch/omap.h> |
| 17 | #include <asm/arch/clock.h> |
| 18 | #include <asm/arch/sys_proto.h> |
Hannes Petermaier | 3c5fabd | 2014-03-06 14:39:06 +0100 | [diff] [blame] | 19 | #include <lcd.h> |
| 20 | #include "am335x-fb.h" |
| 21 | |
| 22 | #if !defined(LCD_CNTL_BASE) |
| 23 | #error "hw-base address of LCD-Controller (LCD_CNTL_BASE) not defined!" |
| 24 | #endif |
| 25 | |
Hannes Schmelzer | 8a094f5 | 2018-01-09 19:01:34 +0100 | [diff] [blame] | 26 | #define LCDC_FMAX 200000000 |
Hannes Petermaier | 3c5fabd | 2014-03-06 14:39:06 +0100 | [diff] [blame] | 27 | |
| 28 | /* LCD Control Register */ |
| 29 | #define LCD_CLK_DIVISOR(x) ((x) << 8) |
| 30 | #define LCD_RASTER_MODE 0x01 |
| 31 | /* LCD Clock Enable Register */ |
| 32 | #define LCD_CORECLKEN (0x01 << 0) |
| 33 | #define LCD_LIDDCLKEN (0x01 << 1) |
| 34 | #define LCD_DMACLKEN (0x01 << 2) |
| 35 | /* LCD DMA Control Register */ |
| 36 | #define LCD_DMA_BURST_SIZE(x) ((x) << 4) |
| 37 | #define LCD_DMA_BURST_1 0x0 |
| 38 | #define LCD_DMA_BURST_2 0x1 |
| 39 | #define LCD_DMA_BURST_4 0x2 |
| 40 | #define LCD_DMA_BURST_8 0x3 |
| 41 | #define LCD_DMA_BURST_16 0x4 |
| 42 | /* LCD Timing_0 Register */ |
| 43 | #define LCD_HBPLSB(x) ((((x)-1) & 0xFF) << 24) |
| 44 | #define LCD_HFPLSB(x) ((((x)-1) & 0xFF) << 16) |
| 45 | #define LCD_HSWLSB(x) ((((x)-1) & 0x3F) << 10) |
| 46 | #define LCD_HORLSB(x) (((((x) >> 4)-1) & 0x3F) << 4) |
| 47 | #define LCD_HORMSB(x) (((((x) >> 4)-1) & 0x40) >> 4) |
| 48 | /* LCD Timing_1 Register */ |
| 49 | #define LCD_VBP(x) ((x) << 24) |
| 50 | #define LCD_VFP(x) ((x) << 16) |
| 51 | #define LCD_VSW(x) (((x)-1) << 10) |
| 52 | #define LCD_VERLSB(x) (((x)-1) & 0x3FF) |
| 53 | /* LCD Timing_2 Register */ |
| 54 | #define LCD_HSWMSB(x) ((((x)-1) & 0x3C0) << 21) |
| 55 | #define LCD_VERMSB(x) ((((x)-1) & 0x400) << 16) |
| 56 | #define LCD_HBPMSB(x) ((((x)-1) & 0x300) >> 4) |
| 57 | #define LCD_HFPMSB(x) ((((x)-1) & 0x300) >> 8) |
| 58 | #define LCD_INVMASK(x) ((x) & 0x3F00000) |
| 59 | /* LCD Raster Ctrl Register */ |
| 60 | #define LCD_TFT_24BPP_MODE (1 << 25) |
| 61 | #define LCD_TFT_24BPP_UNPACK (1 << 26) |
Martin Pietryka | ac5c61b | 2016-04-25 21:25:07 +0200 | [diff] [blame] | 62 | #define LCD_PALMODE_RAWDATA (0x02 << 20) |
Hannes Petermaier | 3c5fabd | 2014-03-06 14:39:06 +0100 | [diff] [blame] | 63 | #define LCD_TFT_MODE (0x01 << 7) |
| 64 | #define LCD_RASTER_ENABLE (0x01 << 0) |
| 65 | |
| 66 | |
| 67 | /* Macro definitions */ |
| 68 | #define FBSIZE(x) ((x->hactive * x->vactive * x->bpp) >> 3) |
| 69 | |
| 70 | struct am335x_lcdhw { |
| 71 | unsigned int pid; /* 0x00 */ |
| 72 | unsigned int ctrl; /* 0x04 */ |
| 73 | unsigned int gap0; /* 0x08 */ |
| 74 | unsigned int lidd_ctrl; /* 0x0C */ |
| 75 | unsigned int lidd_cs0_conf; /* 0x10 */ |
| 76 | unsigned int lidd_cs0_addr; /* 0x14 */ |
| 77 | unsigned int lidd_cs0_data; /* 0x18 */ |
| 78 | unsigned int lidd_cs1_conf; /* 0x1C */ |
| 79 | unsigned int lidd_cs1_addr; /* 0x20 */ |
| 80 | unsigned int lidd_cs1_data; /* 0x24 */ |
| 81 | unsigned int raster_ctrl; /* 0x28 */ |
| 82 | unsigned int raster_timing0; /* 0x2C */ |
| 83 | unsigned int raster_timing1; /* 0x30 */ |
| 84 | unsigned int raster_timing2; /* 0x34 */ |
| 85 | unsigned int raster_subpanel; /* 0x38 */ |
| 86 | unsigned int raster_subpanel2; /* 0x3C */ |
| 87 | unsigned int lcddma_ctrl; /* 0x40 */ |
| 88 | unsigned int lcddma_fb0_base; /* 0x44 */ |
| 89 | unsigned int lcddma_fb0_ceiling; /* 0x48 */ |
| 90 | unsigned int lcddma_fb1_base; /* 0x4C */ |
| 91 | unsigned int lcddma_fb1_ceiling; /* 0x50 */ |
| 92 | unsigned int sysconfig; /* 0x54 */ |
| 93 | unsigned int irqstatus_raw; /* 0x58 */ |
| 94 | unsigned int irqstatus; /* 0x5C */ |
| 95 | unsigned int irqenable_set; /* 0x60 */ |
| 96 | unsigned int irqenable_clear; /* 0x64 */ |
| 97 | unsigned int gap1; /* 0x68 */ |
| 98 | unsigned int clkc_enable; /* 0x6C */ |
| 99 | unsigned int clkc_reset; /* 0x70 */ |
| 100 | }; |
| 101 | |
| 102 | static struct am335x_lcdhw *lcdhw = (void *)LCD_CNTL_BASE; |
Hannes Schmelzer | 8a094f5 | 2018-01-09 19:01:34 +0100 | [diff] [blame] | 103 | |
Hannes Petermaier | 3c5fabd | 2014-03-06 14:39:06 +0100 | [diff] [blame] | 104 | DECLARE_GLOBAL_DATA_PTR; |
| 105 | |
| 106 | int lcd_get_size(int *line_length) |
| 107 | { |
| 108 | *line_length = (panel_info.vl_col * NBITS(panel_info.vl_bpix)) / 8; |
| 109 | return *line_length * panel_info.vl_row + 0x20; |
| 110 | } |
| 111 | |
| 112 | int am335xfb_init(struct am335x_lcdpanel *panel) |
| 113 | { |
Martin Pietryka | 7d04517 | 2016-04-27 21:39:15 +0200 | [diff] [blame] | 114 | u32 raster_ctrl = 0; |
| 115 | |
Hannes Schmelzer | 8a094f5 | 2018-01-09 19:01:34 +0100 | [diff] [blame] | 116 | struct cm_dpll *const cmdpll = (struct cm_dpll *)CM_DPLL; |
| 117 | struct dpll_params dpll_disp = { 1, 0, 1, -1, -1, -1, -1 }; |
| 118 | unsigned int m, n, d, best_d = 2; |
| 119 | int err = 0, err_r = 0; |
| 120 | |
Hannes Schmelzer | 0d8a7d6 | 2018-01-09 19:01:33 +0100 | [diff] [blame] | 121 | if (gd->fb_base == 0) { |
Hannes Petermaier | 3c5fabd | 2014-03-06 14:39:06 +0100 | [diff] [blame] | 122 | printf("ERROR: no valid fb_base stored in GLOBAL_DATA_PTR!\n"); |
| 123 | return -1; |
| 124 | } |
Hannes Schmelzer | 0d8a7d6 | 2018-01-09 19:01:33 +0100 | [diff] [blame] | 125 | if (panel == NULL) { |
Hannes Petermaier | 3c5fabd | 2014-03-06 14:39:06 +0100 | [diff] [blame] | 126 | printf("ERROR: missing ptr to am335x_lcdpanel!\n"); |
| 127 | return -1; |
| 128 | } |
| 129 | |
Martin Pietryka | 7d04517 | 2016-04-27 21:39:15 +0200 | [diff] [blame] | 130 | /* We can already set the bits for the raster_ctrl in this check */ |
| 131 | switch (panel->bpp) { |
| 132 | case 16: |
| 133 | break; |
| 134 | case 32: |
| 135 | raster_ctrl |= LCD_TFT_24BPP_UNPACK; |
| 136 | /* fallthrough */ |
| 137 | case 24: |
| 138 | raster_ctrl |= LCD_TFT_24BPP_MODE; |
| 139 | break; |
| 140 | default: |
Masahiro Yamada | 9b643e3 | 2017-09-16 14:10:41 +0900 | [diff] [blame] | 141 | pr_err("am335x-fb: invalid bpp value: %d\n", panel->bpp); |
Martin Pietryka | 7d04517 | 2016-04-27 21:39:15 +0200 | [diff] [blame] | 142 | return -1; |
| 143 | } |
| 144 | |
Hannes Schmelzer | 8a094f5 | 2018-01-09 19:01:34 +0100 | [diff] [blame] | 145 | /* check given clock-frequency */ |
| 146 | if (panel->pxl_clk > (LCDC_FMAX / 2)) { |
| 147 | pr_err("am335x-fb: requested pxl-clk: %d not supported!\n", |
| 148 | panel->pxl_clk); |
| 149 | return -1; |
| 150 | } |
| 151 | |
Hannes Petermaier | 3c5fabd | 2014-03-06 14:39:06 +0100 | [diff] [blame] | 152 | debug("setting up LCD-Controller for %dx%dx%d (hfp=%d,hbp=%d,hsw=%d / ", |
| 153 | panel->hactive, panel->vactive, panel->bpp, |
| 154 | panel->hfp, panel->hbp, panel->hsw); |
Hannes Schmelzer | 8a094f5 | 2018-01-09 19:01:34 +0100 | [diff] [blame] | 155 | debug("vfp=%d,vbp=%d,vsw=%d / clk=%d)\n", |
| 156 | panel->vfp, panel->vfp, panel->vsw, panel->pxl_clk); |
Hannes Petermaier | 3c5fabd | 2014-03-06 14:39:06 +0100 | [diff] [blame] | 157 | debug("using frambuffer at 0x%08x with size %d.\n", |
| 158 | (unsigned int)gd->fb_base, FBSIZE(panel)); |
| 159 | |
Hannes Schmelzer | 8a094f5 | 2018-01-09 19:01:34 +0100 | [diff] [blame] | 160 | /* setup display pll for requested clock frequency */ |
| 161 | err = panel->pxl_clk; |
| 162 | err_r = err; |
| 163 | |
| 164 | for (d = 2; d < 255; d++) { |
| 165 | for (m = 2; m < 2047; m++) { |
| 166 | if ((V_OSCK * m) < (panel->pxl_clk * d)) |
| 167 | continue; |
| 168 | n = (V_OSCK * m) / (panel->pxl_clk * d); |
| 169 | if (n > 127) |
| 170 | break; |
| 171 | if (((V_OSCK * m) / n) > LCDC_FMAX) |
| 172 | break; |
| 173 | |
| 174 | err = abs((V_OSCK * m) / n / d - panel->pxl_clk); |
| 175 | if (err < err_r) { |
| 176 | err_r = err; |
| 177 | dpll_disp.m = m; |
| 178 | dpll_disp.n = n; |
| 179 | best_d = d; |
| 180 | } |
| 181 | } |
| 182 | } |
| 183 | debug("%s: PLL: best error %d Hz (M %d, N %d, DISP %d)\n", |
| 184 | __func__, err_r, dpll_disp.m, dpll_disp.n, best_d); |
| 185 | do_setup_dpll(&dpll_disp_regs, &dpll_disp); |
| 186 | |
| 187 | /* clock source for LCDC from dispPLL M2 */ |
| 188 | writel(0x0, &cmdpll->clklcdcpixelclk); |
| 189 | |
Hannes Petermaier | 3c5fabd | 2014-03-06 14:39:06 +0100 | [diff] [blame] | 190 | /* palette default entry */ |
| 191 | memset((void *)gd->fb_base, 0, 0x20); |
| 192 | *(unsigned int *)gd->fb_base = 0x4000; |
Martin Pietryka | 3d47b2d | 2016-04-27 21:39:16 +0200 | [diff] [blame] | 193 | /* point fb behind palette */ |
| 194 | gd->fb_base += 0x20; |
Hannes Petermaier | 3c5fabd | 2014-03-06 14:39:06 +0100 | [diff] [blame] | 195 | |
Hannes Petermaier | 3b4e16e | 2015-02-03 13:22:23 +0100 | [diff] [blame] | 196 | /* turn ON display through powercontrol function if accessible */ |
Hannes Schmelzer | 0d8a7d6 | 2018-01-09 19:01:33 +0100 | [diff] [blame] | 197 | if (panel->panel_power_ctrl != NULL) |
Hannes Petermaier | 3b4e16e | 2015-02-03 13:22:23 +0100 | [diff] [blame] | 198 | panel->panel_power_ctrl(1); |
| 199 | |
| 200 | debug("am335x-fb: wait for stable power ...\n"); |
| 201 | mdelay(panel->pup_delay); |
Hannes Petermaier | 3c5fabd | 2014-03-06 14:39:06 +0100 | [diff] [blame] | 202 | lcdhw->clkc_enable = LCD_CORECLKEN | LCD_LIDDCLKEN | LCD_DMACLKEN; |
| 203 | lcdhw->raster_ctrl = 0; |
Hannes Schmelzer | 8a094f5 | 2018-01-09 19:01:34 +0100 | [diff] [blame] | 204 | lcdhw->ctrl = LCD_CLK_DIVISOR(best_d) | LCD_RASTER_MODE; |
Hannes Petermaier | 3c5fabd | 2014-03-06 14:39:06 +0100 | [diff] [blame] | 205 | lcdhw->lcddma_fb0_base = gd->fb_base; |
Martin Pietryka | 3d47b2d | 2016-04-27 21:39:16 +0200 | [diff] [blame] | 206 | lcdhw->lcddma_fb0_ceiling = gd->fb_base + FBSIZE(panel); |
Hannes Petermaier | 3c5fabd | 2014-03-06 14:39:06 +0100 | [diff] [blame] | 207 | lcdhw->lcddma_fb1_base = gd->fb_base; |
Martin Pietryka | 3d47b2d | 2016-04-27 21:39:16 +0200 | [diff] [blame] | 208 | lcdhw->lcddma_fb1_ceiling = gd->fb_base + FBSIZE(panel); |
Hannes Petermaier | 3c5fabd | 2014-03-06 14:39:06 +0100 | [diff] [blame] | 209 | lcdhw->lcddma_ctrl = LCD_DMA_BURST_SIZE(LCD_DMA_BURST_16); |
| 210 | |
| 211 | lcdhw->raster_timing0 = LCD_HORLSB(panel->hactive) | |
| 212 | LCD_HORMSB(panel->hactive) | |
| 213 | LCD_HFPLSB(panel->hfp) | |
| 214 | LCD_HBPLSB(panel->hbp) | |
| 215 | LCD_HSWLSB(panel->hsw); |
| 216 | lcdhw->raster_timing1 = LCD_VBP(panel->vbp) | |
| 217 | LCD_VFP(panel->vfp) | |
| 218 | LCD_VSW(panel->vsw) | |
| 219 | LCD_VERLSB(panel->vactive); |
| 220 | lcdhw->raster_timing2 = LCD_HSWMSB(panel->hsw) | |
| 221 | LCD_VERMSB(panel->vactive) | |
| 222 | LCD_INVMASK(panel->pol) | |
| 223 | LCD_HBPMSB(panel->hbp) | |
| 224 | LCD_HFPMSB(panel->hfp) | |
| 225 | 0x0000FF00; /* clk cycles for ac-bias */ |
Martin Pietryka | 7d04517 | 2016-04-27 21:39:15 +0200 | [diff] [blame] | 226 | lcdhw->raster_ctrl = raster_ctrl | |
Hannes Petermaier | 3c5fabd | 2014-03-06 14:39:06 +0100 | [diff] [blame] | 227 | LCD_PALMODE_RAWDATA | |
| 228 | LCD_TFT_MODE | |
| 229 | LCD_RASTER_ENABLE; |
| 230 | |
Hannes Petermaier | 3b4e16e | 2015-02-03 13:22:23 +0100 | [diff] [blame] | 231 | debug("am335x-fb: waiting picture to be stable.\n."); |
| 232 | mdelay(panel->pon_delay); |
Hannes Petermaier | 3c5fabd | 2014-03-06 14:39:06 +0100 | [diff] [blame] | 233 | |
| 234 | return 0; |
| 235 | } |